How to install Center Jump Seat and swap center Console on Silverado
ฝัง
- เผยแพร่เมื่อ 20 พ.ค. 2016
- How to install Center Jump Seat and swap center Console on Silverado. This should be the same for a GMC Sierra, Suburban Tahoe Denali Escalade Yukon Thanks for watching and don't forget to subscribe!
Great, straightforward video. I personally love the center console, but I love my people too, and it's nice having that extra seat in a pinch. Thinking of doing this to a Suburban to make it a 9-seater.
Thanks
Did you do it?
Did you do it?
I've got one but I need the extra seat cause in current configuration mines only a 4 seater
Thank you for this video!!! I needed to know how to take them out so I can clean the whole inside of my truck
Thanks
Nice video bud I completely understand on the 6 seat set up I recently bought a older Silverado and wouldn't buy one without the jump seat (everyone looked at me like wtf) but I got 4 kids and it's important to be able for everyone to ride
+Jons Air Cond thank you! At least someone understands lol
great video, just the info i needed. thanks!
Glad I could help!
Old School Truck Master! Funny how you did the reverse of what everyone usually does on this subject!
I thought is old was the new! Now im debating keeping mine and going with a fold down
Freaking amazing. Wish car companies would stop putting in these monstrously large center consoles that remove all right knee and leg room. Nice work.
Additional note for those with bose. The module that is part of the center console is required to make the radio work. You'll need that plus the wiring harness.
Which module from the consul are you talking about?
@@caysoncloar2676 there is a metal module buried in the bottom of it that looks like a heat sink.
okay sweet. is there a place to put it after wiring it? @@rodwanolds1871
I just swapped my center consul out for a jump seat today and I was frantically trying to figure out why my radio wasn’t working. I could see what I did wrong
Even if you have aftermarket radio still won’t work ?
Awesome video, showed me everything I needed to know!! Thx!!
That was pretty straight forward. Thank you
I'm doing the opp of what you did cause I want the middle console, couldn't find it in dark grey nowhere, had to get light grey out of junkyard surburban and going to paint it. Thanks for the step by step, great video.
+Gregg Compton no problem and good luck with that
Great video, I want to go the other way. I have a 06 Silverado with a jump seat which I don't like and want to swap it one day for the center console.
Carlos Rivera I would be so happy to trade
Very informative. thank you brotha
Thanks man sounds good lookin forward to it and im subscribing
You the man! Thank you.
Just put the same exact set in my 68 Ford truck.
I'm not a fan of intermixing brands however you have to admit GM makes a comfortable seat.
It wasn't the easiest mod but shoulder restraints, center console with storage compartment, power seat and cup holders hell yeah! it sure Beats my 50 year old bench seat.
I understand! I'm in the middle of installing seats like this, but also putting an F150 XLT console in my '98 Chevy😂
Late 90s Ford Econolines had one of the most comfortable seats frfr. They're just ugly. 😆
What about the amp that powers the speakers for the Bose system Ik when I do mine I’m pulling the amp and harness out of the center counsel to re locate the amp and sub
Great vid, thanks! Thinking of doing same thing with my '06 1500 Xcab Z71. Does leaving that huge wire harness unplugged have any negative effect? Also, I'm not worried about exposed vent hole, as long as it doesn't push air out at the wrong time...
im looking to do the same thing on my single cab. wold be nice to have a 3rd seat option!
When you pulled the center console out there was a red "RCA jack" looking wire, what was that to?
I need new manual front seats for my single cab 2001 silverado 1500 stepside , what other chevy seats have the same hole lineup
What is the dashboard etc called? I plan on installing one of these but I have no clue what I should look up for the glove box / center console part
What year/make/model did you get the bucket and jump seat out of? I wonder if they will go into my 03 silverado single cab.
I know this is an old video but I have a couple questions, I have an lbz with a jump seat and no power seats or anything and I want to convert it to what you have. Now would I have to somehow find a way to make me seats powered or would I have to find seats that just aren’t Powered and throw a center console and stuff in it? I’m just trying to figure this out before i buy everything 🤣
Wonder if you could easily swap the buckets + center console into a 99 with bench and flip up center.
This is very helpful
Can you tell me if the cup holder on the jump seat screwed in or riveted in ? I’m looking to go to a junkyard and remove the cupholder. I would like to know how it is mounted to the seat. Thank you.
I did this swap in my 2005 Chevy 2500HD with LT trim package. I had to remove the wiring harness and Bose amplifier from the center console in order to get sound from my stereo. I mounted the amp under the dash and was able to fit the factory sub next to the air vent below the dash on the trans tunnel.
I have the same truck as you. So you had to remove the amp and the sub from the console and connect it all back in order to have any sound?
@xverzyicx8070, do you have a pic of how/ were you mounted the amp?
Same here trying to also do the opposite.
How much do you want for your old center console and under dash kit?
Am trying to install those same seats on my 68 c10. what size bolts are on the base. the hole on the seat fit a 9/16 bolt. but I feel that to thick. thanks.
Hey round about what year of truck did those seats come out of? They would be a good fit in the back of my bronco. Been looking for seats with built in seatbelts for awhile now
thanks for the video very helpful and great info.
+Isidro Perez Jr. no problem thanks for the comment
I'm looking to do something like this to my 2012 cadillac escalade where can we source parts or we might upgrade to a new model but also gm like gmc suburban or escalade still would like it to be 9 seater with front row jump seat
I'm going to do the same thing I just don't know what part number it is for that glove compartment piece that you had to install if you can help me out I'd appreciate it
i have the center console n seats n swapping to the jump seat. will the jump seat fit in there with the seats with the arm rest in them??
wow. this entire time I thought you needed a special sticker to do that job.
Do I need to take off the wires for the cigarette lighter from the truck that has the center or can I just use the ones that come on my regular truck?
what do you do to fix the big hole where the center console connected to the dashboard?
Would you know if I could take the seats from a 1500 and swap them with seats from a 2500?
Thank you for this video. Now I don't have to find a 6 seater specifically for my family truck. I can do a Junk yard swap.
Did you know that you can do the 07-13 Silverado NNBS center seat swap? It's a direct fit. You have the two lockboxes in it, plus the better jump seat. I'm using this tutorial when all my gear comes in on my 02.
i had the same center console i wanted to install it on a 2001 silverado single cab i have the jump seat what do i need to remove to make the center console fit ?
Can you explain the wiring harness issue you ran into? If all you wanted was the cigarette lighters, shouldn’t that have come out of the dash and not the console?
$125 !? Damn that’s more than a good deal !!!!👌💯
What year did you take out all the seats out of.....i have a 04 silverado 2500hd and want to do this mod also
The seats you put in to your truck where they from the same year or where they from a newer truck
I'm getting a jump seat tomorrow from someone and I got a 03 Chevy Silverado and my seat don't fold down so I'ma take it off but do I got to take the driver and passenger side out to so I could install the jump seat or what really don't know what I'm doing 😂
Thank you for the great tutorial! What’s the dash component called?
Did you ever figure out what wires on the harness where for the cigarette lighter socket and power socket?
Does anyone know the part numbers or what it would be called as far as the dash kits to replace where the center console was connected to the dashboard
Where'd you get that new dash panel from?
Hey just saw the video it was great I was just wondering where did you get the seats again because I have a 2004 GMC that have the jumpseat. appreciate it if you get back to me
anyone know if this iscssme process for the 95-98 trucks? and will these seats work if i cant find a split bench?
Best video on TH-cam how to do this although I’m removing my jump seat
Where you located
@@Jake-ql6ey Michigan
Does this fit on a 2005 gmc sierra 1500? Also where do you get this bench seat?😅 been trying to look for it everywhere
Did swap radio won’t work? Did I miss a step? 2004 Gmc 2500
Great video. I hope I can do this on a 05 Tundra. Center consoles suck...
It looks like he has an aftermarket stereo system. If you have the stock BOSE system, you would loose that as the stock amp and center sub are in the console.
jewllake I know it’s been 2 years but I’m wondering the same thing
Just saw another video, the nnbs 07-13 center consoles are a direct fit as well and they have double the storage. If you get lucky at your next junkyard. I’m goin to try to do this full console swap but use that nnbs jump seat instead
Where did you see the video? My 2007 was just totalled and Im looking at a another one but its buckets.
A regular socket will remove the E Bolt head bolts? Fixing to have to replace the front drivers seat in my wife's 99 GMC Suburban
Yup, a regular hexagonal socket will work with the E sockets. I believe you'll need a 11mm and a 15mm for both the front and back.
Thank you for great video. Now I know that it goes. I want to do that too, but I didn't find that dash part anywhere yet. Do you know about that same piece as you have but in that light brown(beige) color? Thanks
You can get the dash piece from GMPARTSDIRECT.COM. But you'll need to give them a VIN number to make sure you get the correct matching color piece.
Awesome, what about
Seatbelt for that jump seat?
Good video. Im planning on doing the opposite as you are. would rather have the extra storage and higher cup holders.
+Rob Aguiar awesome hope this works out for you I did this because I need to fit my family in the truck
anyone know the part # for the central panel that's supposed to be there when you have the jump seat instead of the central console? If GM doesn't make one, is there an aftermarket source for them? I think I saw it on some cars
Did you find one?
Great video 👍👍.. If u go from electric seats to manual, how do u plug the wire harness under the seat to make the airbags work?
They plug right in for seat controls but the older Manuel seats dont have air bags
How did you end up hiding the amp and stuff to keep the radio working?
I’m finna do this, but bucket seats in the middle, bench in the back and kinda what you’re doing w the front
good vid bud.
Is that a torx socket that fits the seat bolts?
Golden vid
I’d love to get my hands on the interior from 2012 and up in good condition. To replace the interior in my 2006.
If you did how did it go? And how did u swap the seats
I have a 2002 GMC 2500HD with the 40/20/40 seats, and I just removed out the center console/jump seat, so far I'm likin' it with just havin' buckets only...No back seat either, took that out yrs ago to accommodate the dogs(4)...Nowadays, it's just me and one dog, who gets the passenger seat to himself...I'd like to find a console similar to the one you removed for my truck...
Could you use the stock seats
i wanna do that to my 03 tahoe. the crap on the rear of the center console dont work and im gonna upgrade the stereo and get rid of the bose system.
What did you end up doing with that open vent? I was wondering if there was a way to even swap out a part so that it was closed off back further.
It’s crappy when you have been waiting 3 years for a reply.
How can I do this to my 2017 dodge grand caravan
Do you have to have special sockets or just normal
What about the RPO codes on the inside of the glove box, did you change the glove box doors
@Gerry Pointer
Possibly at 5:19
Looks like you can take the pro factory codes lid portion completely out of glove box bezel.
When swapping bezels/glovebox. Just trade in the correct lid matchin truck frame and body vin. Instead of the donor glove box bezel.
What year was the glove assembly????
What does the glove box have to do with it ?
Im looking for a brown leather jump seat and glovebox stuff. I need the extra seating. Anyone have for sale or trade for my center console? I have a 2005 lly.
I am having a hard time finding the lower part of the dash with the glove box to cover up the hole. Where did you get yours?
agreed... I have looked for that part for a while now, all l keep finding is the dash parts for mating to the center console, not going this direction. Called it just about every name I can think of...
good job 👍
How did you get your radio to work after???
How did you remove the seat belt?
Hey great video! do you know if you can swap jump seat for a center console if you have the manual 4x4 shifter on the floor?
I'm sure you could since the bolt pattern on the floor is the same. Thanks
Jimmy Hurley I know this comment was from a long time ago but check out my videos, I swapped a full console in with floor shifted 4wd.
Thanks for the video,God bless . The only problem I came across was , my truck has Boss speakers and I need it and inside the center console
There might be a way to take all the wiring and Bose amp and tuck everything behind the dash
Did you ever figure it out
Doing the same that he did. But I’m stuck on trying to relocate my factory amp that was in the center console. Radio will not work without amp being plugged back in
Solution: factory amp fits perfectly (snug) up and behind gas pedal with it being close enough to plug into harness.
A great remove and install video.
Some trucks dont have the rear radio controls so it wont be an issue. Losing the rear vents for air flow would be hard for me.
That's my holdup as well.
Gr8 video! I have a 2001 Suburban with the front jump seat and wanted to do the opposite and ad the console...any pointers??? Thanks! 🏁🔥🏁🔥
th-cam.com/video/AYzNdKfHRp8/w-d-xo.html
Where did you buy the seats?
will the the jumpseat fit if i have captain chairs with armrests? just swap the center console for the jumpseat right?
+jeffrey aguilar yes it will
Does you new power seat work?
If you had Factory Bose in the truck you would of course have to put the BOSE amp and SubWoofer else where, the amp could be hidden under the dash but the sub would be lost, you can infact bypass the stock AMP, you would need to take wires from the radio, run 8 wires, 1 for + 1 for - of each of your door speakers, like FRONT LEFT - , REAR RIGHT +, then on the wiring harness in the center console, where the amp is, take the wires leading into the amp on the bigger of the 2 connectors, there are certain colored wires you must cut and then connect to your wires from the radio, look up the Diagram from for vehicle or PM me your vehicle and ill send you a list of the wires to cut, but you need to connect the end of the wires that is running AWAY from the amp, not into the amp in order to bypass the amp, I did the amp bypass on my 04.5 LLY duramax because my bose amp gave out of me. My aftermarket Headunit works perfect, i can adjust the EQ of each door speaker properly, i wired the stock Bose Subwoofer also so it works properly, as well as added in a aftermarket amp for my 2 10' subs in the rear that i added behind the rear seats.
We got rid of the center console in my pickup, and replaced it with a jump seat. But now we are at a loss as to what to do with the amp and sub just sitting on the center hump. We replaced the head unit with an aftermarket. Now the radio sounds like crap...pretty much like its underwater. I'm thinking my amp is no longer working. But wanting to get rid of it and put in something different. Where do I go from here? Any help would be appreciated!
When are you gonna do a video on the plastic cover on the AC vent? Great vid by the way
I will get it done soon now that you mention it, thanks!
Can I keep my driver/passenger seats and only swap out the center console to put in a jump seat? Or do I need driver/passenger seats that are specifically for a jump seat?
I'm wondering that too. did you do it?
@@carlosdominguez9911 Still haven't done anything yet.
@@Riskspeed you just need the console or jump seat, not the seats
you just need the jump seat. he says it at 0:10. good luck finding a decent one though 😂
Hi, I'm interested in buying your old set of seats & center console. How much? Let me know, Thanks!
Good video, I was thinking of doing the same thing with my 05 GMC because I need more seating space. My question is did your stereo work after removing that center console with that speaker. My stereo didn't want to function because I didn't put that center wiring harness.
Same here mine isn’t working did you figure it out
Mine neither, I found this video super helpful. Let me know what you all find out
(Serious question) How is this downgrading a Silverado though? I have a 05 Silverado with center console but think a jump seat adds more benefits. It's still a console & can turn into a 3rd seat. So how is it a downgrade?
+Andy Yang I think you make a valid point
Single people like the looks of the old center console thatz all
Andy Yang i hate center consoles
Caleb Melton
Meto, I wish all cars would have split bench seats and the shifter on the steering collum like a 2013 Impala LT Front bench option
Or a 1996 Ford Taurus Front bench option.
The lids on the 99-02 jump seat consoles are very flimsy. If you lean on the lid while entering the truck it won't last long at all. I'm considering adding a 2015 jump seat. Better quality and 3 cup holders, lol.
I am swapping the Console out for a Jump Seat as well, Where did you get your jumpseat, also the new Glove box Thing that goes over the old Cigarette outlets/ I still wan't the cigarette outlets, but in taking out the console as you said, you lose em!
+NyteOwl no you don't loose them just plug the old wiring clips to the new ones. Look at your local junkyard that where I found mine
+NyteOwl I went to the junk yard and got lucky I would go that route for the parts
This is an old video but if you see this I would love to see if you can answer my question. I just swapped my center consul for the jump seat. I pulled out the whole wire harness out of the consul and plugged it into the cigarette lighters. The cigarette lighters work and the radio turns on but there is no sound. I couldn’t see anything else that I was supposed to plug in so I am very confused what else I am supposed to do to get my speakers working
I have the Bose speakers and leather interior that came with the 05 z71
Your stock Bose amp is underneath the center co sole you pulled out