Same got to my mind, the first thing taught in bearing installations :) Hardly take damage with low pressure but next time hit the outer ring when installing bearing in the hole. When installing to the shaft hit the inner.
Muitos estão espantados com a memória deles, para lembrar onde vão as peças, quando montam. Só esquecem que eles estão GRAVANDO o passo a passo da desmontagem. Então é só fazer o inverso, quando for montar. E, claro, eles podem ter uma boa memória, também. Mas certamente a gravação ajuda bastante. De qualquer forma, é um belo e inspirador trabalho. Parabéns!
Mistakes include but not limited to; -Painting inside the bearing and mating surfaces. -Incorrect paint for inside of engine. -Excessive gasket sealer will overflow into crank. Not optimal. -Bearings installed incorrectly in a manner that often causes failure. -Piston installed backwards, will result in failure. -Suspected bent crank, will result in failure. -Possibly incorrect fuel, will result in failure. -Chain blunt Well below operable standard.
Yep, I noticed that too. But the worst thing he did is the way he istaled bearings 😱 The bearing nests shold be heated up to ~120 °c and then you put the cold bearings inside. They get inside like a dream and without any hammer.
So what? He found the fuckin saw in the woods. He'll get some use out of it for a while, FOR FREE! There's always some expert asshole critic. I guess maybe he should have called you where you could charge him to rebuild it, Fuckin cheap skate!
When they found it chain on backwards.. when he puts it back together he does the same thing... Then it shows when he is adding fuel the chain is on correctly... Got to love it
Love watching these restoration videos. even if, as all the comment say, they aren’t done 100% correctly. It’s just so satisfying seeing something be reborn.
Not only don't you use the inner ring but I'm pretty sure you should pack them with grease. My theory on this channel and about 20 others just like it, is that it's a rigged. Someone has set up a bot system and pays these people a few bucks to sorta refurbish different items and then they collect any TH-cam money. I found a channel that was 3 months old had 5 videos and like ten thousand subs but each video had over 10 million views each. There are some where you can hear in the background someone wrenching on another project. Easy money just find a item that works sorta,trash it out some more and then pay a person 5 bucks or whatever to "restore" it and some else 5 bucks to film it. Then have 5 or 6 channels,edit the vids and upload and then turn the auto system on to constantly replay the vids, like printing money
Просто супер, с удовольствием посмотрел на кропотливый труд. Молодец парень, руки золотые. Из инструментов шестигранник, отвёртка и разводной ключ, но это не помешало восстановить бензопилу.
1)Dont paint Sealsides 2)Dont hit the bearing at the inner Ring 3) Piston is turned around, arrow shows always exhaust side 4) be more carefull with the engine, dont throw that cylinder around, and dont let all the parts fall on them
@@austinledford8501 No, he disassembles then assembles the stuff, that much is clearly true. What is fake is the "finding random stuff in the forrest when i go for a walk" and the condition of the stuff he "restores" He clearly paints or dips the things in some sort of solution to create a impression of rust or age. Maybe even some reverse editing. pay attention to the "rusty" components before and after, no pitting from rust at all, also the rust/ageing is always the same colour, and comes off very easily. But check out the xbox resto, or some of his other electronic restorations, they are the most clearly faked.
backward chain too..this guy typical asian..has no clue..watched one guy here restore a guitar..found it lying in the long grass..put it back together back to front...
bent crankshaft, paint inside the engine..... that thing was poop now it's poop with wasted paint and bearing and it will last a week before have a real engine crash locked solid worst than if it was found under the sea after 10 years....
yep exactly and should have replaced the bent crankshaft and should have not paint the inside of the engine and should have put it on the dumpster.....
One of the first things I noticed haha That's probably why they left it out there 🤣 I did that when I was a kid and got so frustrated because it wasn't cutting and just burned the wood lol my dad laughed and made me figure it out
@@stillwater62 this isn't a tutorial bud it's a restoration. I'd be willing to bet over 90% of viewers on this video will never run a chainsaw. If this was a how to then I'd agree with you but it's not. If your learning about how yo put on a chain in this video of tell you that your not using the internet efficiently.
Why do the rubbers look like new when the saw is supposed to be old? You don't paint the inside of a motor or hit the inner ring of the ball bearing. This restoration is a fake.
Как там оказалась эта пила : ,,пошел лесоруб в лес и начал пилить деревья своей мощной пилой , но тут вышли гномы , дали люлей лесорубу и утащили в свое логово , а пила так и осталась:) Кто понял о чём тот молодец
Finds rusty chainsaw and strips down completely, reassembles after cleaning it up remembering where 312 pieces go then forgets to add oil into fuel... At least you’ll know where to place it again after it seizes...
Bullshit bullshit bullshit. 1. Noone "just finds a chainsaw" sitting on a cut tree like that. Did the previous owner not think enough of his saw to even take it home after work ... or even to fix it if it stopped working. How lucky, just to find it as a friend was filming you. 2. All these "old machines" he "fixes" are dirtied up to look worse than they are. Plastic does not rust. Alloy does not rust like that. Any chainsaw motor and blade would be covered in oil and sticky shavings.
Это все фигня. Иду я как - то по лесу, в форме лесника, вижу мужики дрова пилят. Я к ним ближе подхожу, а они бежать от меня. Так теперь у меня две пилы хускварна 365 и штиль 180
Shouldn't paint the covers they need staining piston put in back to front chain needs tightening and sharpening but imagine what he could do with a socket set and spanners?
Never knew they made chainsaws that didn't need an oil mixture for the fuel to work. Won't be long for that chainsaw to have no compression and seize up.
@@peterfedor9288 Well, based on my little experience with 2 stroke engines, the oil is in quite dark red colour (Like a blood from vein). So it dyes the fuel in red - reddish colour.
@@tigerxra8515 There are various brands of the m2t oil - red, green, blue, yellow and so on. U can't tell by looking at gas if it's mixed or not with yellow oil(that's why I don't like these oils - can't see the difference). I have workshop and do engine repairs(fyi james), so I know what's going on.
@@peterfedor9288 Oh, thanks! I had my suspicions that there is more that one colour of oil, but I wasn't sure. Yeah, I love the red oil. It's easy to tell if fuel is with oil or without. Is there are difference between the oils, apart the colours?
Awesome guess! I took details from your guess and the video and did a web search. This saw is likely a Chinese GR-4500 made by Zhejiang Jiauri Machinery Co., Ltd. (Found the chainsaw details and picture on Alibaba).
I wish all these Asian rustoration channels would skip the fake “found” part and just do tear down and cleaning. Would make it seem more realistic and somewhat believable.
bearings must be completly unsealed (lips of the sealing ring are oiled by gas mixture) and installed by outer ring , gasket is out of sense because it causes a gap in front of the engine body and its tension, silicone is enough, use some grese when intalling needle bearing
да это он её и ставил 38-12. Смотри, покупается пила на местном "авито", снимается кино как он её отдриставрировал. пилка закидывется на месяцок в сырой подвал и снимается новая часть дриставрации, потом монтаж этого высера.
Они ещё и поршень при сборке задом наперед воткнули.Замки поршневых колец могут попасть на окно в цилиндре,и сломаться.Стрелка на поршне должна смотреть в сторону выхлопного окна.
What I love most about this restoration s is how you just go out and pick them anywhere I also would like to be in a place where I go out and find valuables anywhere
24:38, dont hit inner ring hit at the outer ring otherwise use bearing puller & to avoid contamination to bearing journal open the seal always after the bearing installed
Ооооо! Какое разнообразие! Он оказывается не только на берегу и на свалках что-то находит! Завидую. Вот у них бензопилы валяются. А у нас только бутылки, сапоги и унитазы. (((( Нет. Вру. Намедни собирал грибы. В получасе ходьбы по лесу от ближайшей дороги обнаружились: стальная эмалированная раковина, эмалированная миска и полусгнившая банка из-под советского паркетного лака. Это ли не странно? ;)
that chainsaw probably is even 10 years old and they immediately ruined it buy putting straight gas in it not 40:1 which that off brand chainsaw would be
![Rare Bow Chainsaw [Restoration]](http://i.ytimg.com/vi/Wjv75kJyZ7M/mqdefault.jpg)
Ain't nothing like being out in the wilderness with your chef knife collecting roots and chainsaws...
ض..
@@احمداحمد-ك6ض1د h
24:35 DONT HIT THE INNER RING! it will damage the bearing! Always Press or Hammer the ring that gets friction, like in this case the outer...
Same got to my mind, the first thing taught in bearing installations :) Hardly take damage with low pressure but next time hit the outer ring
when installing bearing in the hole. When installing
to the shaft hit the inner.
That was my first thought. Every time I see a restoration, guys hammer in the bearing on the inner ring...
I did this 1 time and bamm bearings broken
First thing I did when I seen this. Is go to the comments to see if anyone else noticed
That was the first thing I saw, the thing with the inner ring and the bearing seat is painted that's not good
Muitos estão espantados com a memória deles, para lembrar onde vão as peças, quando montam. Só esquecem que eles estão GRAVANDO o passo a passo da desmontagem. Então é só fazer o inverso, quando for montar. E, claro, eles podem ter uma boa memória, também. Mas certamente a gravação ajuda bastante. De qualquer forma, é um belo e inspirador trabalho. Parabéns!
Ngomong naon sih
とても良い動画でした🙇♀️🙏
Mistakes include but not limited to;
-Painting inside the bearing and mating surfaces.
-Incorrect paint for inside of engine.
-Excessive gasket sealer will overflow into crank. Not optimal.
-Bearings installed incorrectly in a manner that often causes failure.
-Piston installed backwards, will result in failure.
-Suspected bent crank, will result in failure.
-Possibly incorrect fuel, will result in failure.
-Chain blunt Well below operable standard.
Yep, I noticed that too. But the worst thing he did is the way he istaled bearings 😱 The bearing nests shold be heated up to ~120 °c and then you put the cold bearings inside. They get inside like a dream and without any hammer.
So what? He found the fuckin saw in the woods. He'll get some use out of it for a while, FOR FREE! There's always some expert asshole critic. I guess maybe he should have called you where you could charge him to rebuild it, Fuckin cheap skate!
It wasn't free he bought a few parts and he put in his time. . I think he'll get five to seven years of use out of it. Well worth his time.
@@randallreed9710 I totaly agree with you dude...there always has been expert assholes and stupid assholes, you decide which one you will bee 😂
Lĺĺl
When they found it chain on backwards.. when he puts it back together he does the same thing... Then it shows when he is adding fuel the chain is on correctly... Got to love it
mmmmm no bar oil either so much FRICTION!! lol
the arrow on the piston indicates it must face the exhaust
th-cam.com/video/bDDRl1nKFJk/w-d-xo.html Water Pump Restoration
I have don a detailed restoration video in my youtube channel "Workshop media"
Paling suka.cannel ttg restorasi....mantab...
Love watching these restoration videos. even if, as all the comment say, they aren’t done 100% correctly. It’s just so satisfying seeing something be reborn.
Remi
Oji
A hug A
Bernardo sousa
@@jorgetroncoso5821 hhh7hhh
dude you mounted the piston the wrong way... The Arrow needs to point to the exhaust, not the intake
Did you see him pound the main bearing in for the center race... real cool lol
@@jasonhoose5215 Yea i did -.- , made another Comment about that
I found the only people who know what theyre talking about in these comments. This resto made me cringe the whole time
@@maxwelloregan8463 Yeah there are a lot of stupid ones down there 😂
@@jasonhoose5215 🔪、
You NEVER insert bearing by hitting on the inner face, tap it in on the outer face
, you damage the bearing by hitting the inner face
Not at all, small bearing can be easily fitted in to the shaft of bearing housing. Heating producers can be done with big and critical equipment.
Not only don't you use the inner ring but I'm pretty sure you should pack them with grease. My theory on this channel and about 20 others just like it, is that it's a rigged. Someone has set up a bot system and pays these people a few bucks to sorta refurbish different items and then they collect any TH-cam money. I found a channel that was 3 months old had 5 videos and like ten thousand subs but each video had over 10 million views each. There are some where you can hear in the background someone wrenching on another project. Easy money just find a item that works sorta,trash it out some more and then pay a person 5 bucks or whatever to "restore" it and some else 5 bucks to film it. Then have 5 or 6 channels,edit the vids and upload and then turn the auto system on to constantly replay the vids, like printing money
Yes!!! I saw that and got a little worried 🤣
That and the piston is facing the wrong direction. Arrow towards muffler.
Reeve i agree, and with a peace of wood or with a plastic hammer.
mantappp bossquu
Просто супер, с удовольствием посмотрел на кропотливый труд. Молодец парень, руки золотые. Из инструментов шестигранник, отвёртка и разводной ключ, но это не помешало восстановить бензопилу.
Он Русский, привык к УАЗикам, здесь всё тоже самое, отвёртка, симпатии, ну и благословение коей-то матери!
Siapa yg dari indonesia like
1)Dont paint Sealsides
2)Dont hit the bearing at the inner Ring
3) Piston is turned around, arrow shows always exhaust side
4) be more carefull with the engine, dont throw that cylinder around, and dont let all the parts fall on them
6th-cam.com/video/c5lnmOqqfZg/w-d-xo.html
I bet you this dude is from China so what would you expect
3) if he knew that and put piston turned around to get better conrod angle 😁 but this only works 4t engines it rattles cold but no warm anymore
Saludos desde Argentina
how convenient that a chain saw was randomly laying around and he knew exactly where it was
Why does that matter? It was about the restoration
@@austinledford8501 @@@
@@austinledford8501 Because the videos are fake.
@@uhtred7860 the builds are fake?
@@austinledford8501 No, he disassembles then assembles the stuff, that much is clearly true. What is fake is the "finding random stuff in the forrest when i go for a walk" and the condition of the stuff he "restores" He clearly paints or dips the things in some sort of solution to create a impression of rust or age. Maybe even some reverse editing. pay attention to the "rusty" components before and after, no pitting from rust at all, also the rust/ageing is always the same colour, and comes off very easily. But check out the xbox resto, or some of his other electronic restorations, they are the most clearly faked.
Backwards piston, no bar oil, dull chain, no oil fuel mix,
Chain backwards, silicone with head gasket, banging bearings with hammer, must be awesome.
backward chain too..this guy typical asian..has no clue..watched one guy here restore a guitar..found it lying in the long grass..put it back together back to front...
joshua Gargalione how about praising the lad instead of knocking hi so what if he made a few mistakes IMO he did a hell of a job
bent crankshaft, paint inside the engine..... that thing was poop now it's poop with wasted paint and bearing and it will last a week before have a real engine crash locked solid worst than if it was found under the sea after 10 years....
1 hr to dissemble and 2 months to clean. Excellent job.
Buen video para revolucionar el cono imiento.
should have pressed the main bearings in by the outer race , not the inner !
yep exactly and should have replaced the bent crankshaft and should have not paint the inside of the engine and should have put it on the dumpster.....
He put the piston on backwards too. Arrow on top should point towards the exhaust, not the intake. That saw won’t last long at all.
@@brodytonelotti3577 he will learn
And he should of heated the case in a oven or use a heat gun
Yep and took the paint off the crankcase where the cylinder gasket sits AND lube the lips of the crankcase seals
Did anyone else notice that the chain was on backwards when he first got it
One of the first things I noticed haha That's probably why they left it out there 🤣 I did that when I was a kid and got so frustrated because it wasn't cutting and just burned the wood lol my dad laughed and made me figure it out
@@stillwater62 cheated and turned it around? Lol that or figured it out and turned it around. Not sure why it would be cheating
First thing I saw
@Sean Tyree I'm surprised it took this long for someone to notice
@@stillwater62 this isn't a tutorial bud it's a restoration. I'd be willing to bet over 90% of viewers on this video will never run a chainsaw. If this was a how to then I'd agree with you but it's not. If your learning about how yo put on a chain in this video of tell you that your not using the internet efficiently.
Always drive on the outer race of a bearing when installing in a housing, inner race when installing on a shaft.
I’m surprised he didn’t break one of the bearings wouldn’t matter any way because he gonna have to rebuild it agian
এই ভাবে এগিয়ে যাও ভাই☺
Why do the rubbers look like new when the saw is supposed to be old? You don't paint the inside of a motor or hit the inner ring of the ball bearing. This restoration is a fake.
Agree 100%
That moment when he likes the comment
th-cam.com/video/c5lnmOqqfZg/w-d-xo.html
Piston backwards ,no pre oiling of and bearings,no oil on piston or jug to prevent dry start,some people are just born lucky
The cutting chain was installed backwards and re installed backwards. Also you must mix gas with oil for two stroke engines
Nice good job idol tamsak thanks for aharing this video
Как там оказалась эта пила : ,,пошел лесоруб в лес и начал пилить деревья своей мощной пилой , но тут вышли гномы , дали люлей лесорубу и утащили в свое логово , а пила так и осталась:)
Кто понял о чём тот молодец
Я в теме😂😂😂
th-cam.com/video/bDDRl1nKFJk/w-d-xo.html Water Pump Restoration
I love how you smack that main bearing right in the center
😁
@@handikarahayu4789 !
yup and paint inside the engine and bent crankshaft and whatever.... it work (will last a week)
Классно получилось, кому тоже нравится ставь лайк👍
Хуяйк👎
Ну да в магазине взять замарать а потом разобрать и собрать ну гений просто пищей хуяйк а не лайк
Wow NiCe 👍👍 thank you for sharing 👏👏👏
I think the piston was installed the wrong side, the arrow is always on the exhaust side🤷♂️
Well it started
I noticed that too..
Hehe and more like no masking tape etc ;p
kosti116 honkez
But the ring gaps never are....
very good, what impresses me most of these type videos,is the remembering where all the parts go during the rebuild.
One can always look back at what has already been recorded!
Cool another buried in the backyard for a week resto video
You have to run mixed gas in the saw. Looks like your putting regular gas in it
Eedggee5tr
대단한 솜씨에 놀란습니다
Finds rusty chainsaw and strips down completely, reassembles after cleaning it up remembering where 312 pieces go then forgets to add oil into fuel... At least you’ll know where to place it again after it seizes...
T 54t
No annoying intro, beautiful shots, masterful work, extreme details.
Your screen name is 🔥
@@thebarexam614 в
Wouldn’t say masterful work but thrust is true
Bullshit bullshit bullshit.
1. Noone "just finds a chainsaw" sitting on a cut tree like that. Did the previous owner not think enough of his saw to even take it home after work ... or even to fix it if it stopped working. How lucky, just to find it as a friend was filming you.
2. All these "old machines" he "fixes" are dirtied up to look worse than they are. Plastic does not rust. Alloy does not rust like that. Any chainsaw motor and blade would be covered in oil and sticky shavings.
День добрый, при сборке вы неправильно поставили поршень,(стрелочкой к карбюратору,) а нужно стрелкой на выхлоп,
А в чём разница и какие последствия?
@@x84pav84x Окна и кольца .
@@x84pav84x место стыка кольца попадает на выхлопное окно, кольцо ломается и последствия печальные!
@@lyadovihifazenda заводиться будет но работать нет, это как бежать задом.
Там стрелкой к карбюратору и стоит
Hebat hebat kreatif n hebat 👍👍👍
Вот что вода и краска животворящая делает!!!
Ходил давеча по лесу клещей собирал, глядь кузов от ламборгини! Подобрал восстановил, теперь все девчата на селе со мной здороваются когда я проезжаю.
th-cam.com/video/bDDRl1nKFJk/w-d-xo.html Water Pump Restoration
Так чисто случайно нашел. Пила даже в землю невросла:)
@@asderge они её месяц поливали солёной водой.
Фигня!Я титаник на ставке нашел,ото да!
Это все фигня. Иду я как - то по лесу, в форме лесника, вижу мужики дрова пилят. Я к ним ближе подхожу, а они бежать от меня. Так теперь у меня две пилы хускварна 365 и штиль 180
Просто удивительно, что «старая» бензопила конструктивно идентична новым бензопилам китайского производства в пластиковом исполнении...
Потому что она не старая, и врядли была там на самом деле
th-cam.com/video/bDDRl1nKFJk/w-d-xo.html Water Pump Restoration
@@ПапаДжастифай-э3в ⁸l
2
Нас не будет
Shouldn't paint the covers they need staining piston put in back to front chain needs tightening and sharpening but imagine what he could do with a socket set and spanners?
Next time you pound in a bearing with a socket, make sure the socket is big enough to cover the outer ring, not the inner.
An environmentally friendly chainsaw. . that runs on green tea.
Piston instaled wrong . The arrow should Show to the exhaust not the intake
Maybe he'll get lucky and the piston ring won't snap lol.
Do we talk about lubricating the chamber while putting the piston in....?
@@romainberger k
Chainsaw. My Favorite Power Tool!
So what happened? Someone cut a tree 100 years ago and oops, forgot their chainsaw.
Мне иногда кажется, что они специально закапывают что то на некоторое время чтоб потом снять об этом видео🤔
Ну, вы же новости смотрите по телевизору? Там то же самое!
Именно. Неужели кто то такую пилу выкинет в лесу
так и есть
Я так и думал,всё вызывайте ФСБ
У него таких закладок по лесу ещё не на один год хватит. Но скорей у себя на територии зарывает потом просто подкидывает куда-нибудь
Cleaning all those parts is not for the faint hearted.
2019
Hello my name is Jimmy Whiteside and I just wanted to say that I think that your are amazing at what you are doing
Yea that jug gasket is gonna last real long with a painted surface under the gasket 👍🏻
Pretty sure he can fix it
@@tggraham3321 by looking at the video, probably not.
My man starting chainsaws with one flip flop on and y’all hating ? Pfff excellent work ! Enjoyed this restore, thanks 🤙🥃
99
@@〆XISHNIK个 ㅃ
Never knew they made chainsaws that didn't need an oil mixture for the fuel to work. Won't be long for that chainsaw to have no compression and seize up.
I'd like to know, how u figured out that he used fuel without oil.
@@peterfedor9288 you clearly have no experience with two stroke fuel mixture. You can tell just by looking at it when he poured it in.
@@peterfedor9288 Well, based on my little experience with 2 stroke engines, the oil is in quite dark red colour (Like a blood from vein). So it dyes the fuel in red - reddish colour.
@@tigerxra8515 There are various brands of the m2t oil - red, green, blue, yellow and so on. U can't tell by looking at gas if it's mixed or not with yellow oil(that's why I don't like these oils - can't see the difference). I have workshop and do engine repairs(fyi james), so I know what's going on.
@@peterfedor9288 Oh, thanks! I had my suspicions that there is more that one colour of oil, but I wasn't sure. Yeah, I love the red oil. It's easy to tell if fuel is with oil or without. Is there are difference between the oils, apart the colours?
Looks just like the cheap Chinese saw I've got in my shed...
th-cam.com/video/bDDRl1nKFJk/w-d-xo.html Water Pump Restoration
th-cam.com/video/bDDRl1nKFJk/w-d-xo.html Water Pump Restoration
Awesome guess! I took details from your guess and the video and did a web search.
This saw is likely a Chinese GR-4500 made by Zhejiang Jiauri Machinery Co., Ltd. (Found the chainsaw details and picture on Alibaba).
@@TacticalTerry the one I have is from an Ebay seller, labelled as a Giantz
@@danieledwards1081 hes trolling you hes from the goe phuc urselph club
I wish all these Asian rustoration channels would skip the fake “found” part and just do tear down and cleaning. Would make it seem more realistic and somewhat believable.
O de
thanks a lot You People are the Best! Thank you friends. Congratulation from Brazil.
Look, they gave you a heart. I don't think they understand English. More so, that's not even some antique, just a cheap Chinese chainsaw.
Qqq
😂🤣 🤣 Hahahaha😂😂
You must put it together with oil on the seals, bearings and piston. Will not last long on start up.
I was literally just thinking the same thing “bro you need those, there dust covers”
And The piston is turn The wrong way🤣🤣
Good job brother thankyou
Just happened to be sitting there , another find!
Bom maçanico esse é o que se chama de proficional parabéns
Lol at least they have a storyline behind their restorations
Love how he tried to start it with the switch of
When he tapped in the bearings by the inner raise it kinda hurt my soul
And painting the inside of the engine case isn't funny either !!
Omg I went fucking nut over that and the paint in the crank case
Zylinder Head in the wrong way 😑
and starting it in with strait gas on initial run
th-cam.com/video/c5lnmOqqfZg/w-d-xo.html
Excellent upload. Full watched and have a wonderful day
Staged as hell. So someone ran all the fuel out of the saw without realizing the chain was on backward? Then just left it sit in the woods?
The chain is not backwards 🤨
Fuel does evaporate 🤪
@@peytend5809 it was when he "found" it and started working on it.
@@brettwhetzel4705 ohhhh I was looking when he was working on it
bearings must be completly unsealed (lips of the sealing ring are oiled by gas mixture) and installed by outer ring , gasket is out of sense because it causes a gap in front of the engine body and its tension, silicone is enough, use some grese when intalling needle bearing
Its fake water doesn't just end up in the oil tank without a huge ass hole in it.
Подшипник запрессовывают по внешней обойме!!!
Well Done
35:48 Look at the Clutch!
Не далёкие типы поставили цепь задом на перёд , попробовали не режет и выкинули её))))
Я тоже заметил)
Да и бензин обычный заливают
Я тоже это заметил
да это он её и ставил 38-12. Смотри, покупается пила на местном "авито", снимается кино как он её отдриставрировал. пилка закидывется на месяцок в сырой подвал и снимается новая часть дриставрации, потом монтаж этого высера.
Они ещё и поршень при сборке задом наперед воткнули.Замки поршневых колец могут попасть на окно в цилиндре,и сломаться.Стрелка на поршне должна смотреть в сторону выхлопного окна.
Quem aí tb está viciado nesses vídeos de restauração
2
Người thợ tài hoa
The last 2 of these rebuilds the chain were on backwards before the start. Maybe that is why they were discarded.
The chain was on back wards thats why they left it there.Would not cut lol
Nu
Nu
L n lp
Nula o
Que
bLGXT
NLG km
J
Omg you are right.. maybe they were high put it on backwards and put it down and got lost in the woods and died.. that poor dumb soul
00:13 - "Be very qwiet, I'm hunting chainsaws. Hahahaha"
23:34 - Bless you.
🤣🤣🤣🤣🤣
lol
muy bueno ese muchacho
this saw remind me of leatherface
th-cam.com/video/bDDRl1nKFJk/w-d-xo.html Water Pump Restoration
I have don a detailed restoration video in my youtube channel "Workshop media"
Same lol
@@hasanthasasika3685 ㄱㅁ기긐
.??ㅡ.◎△◆≠∫££ ㅊ차
th-cam.com/video/c5lnmOqqfZg/w-d-xo.html
What I love most about this restoration s is how you just go out and pick them anywhere I also would like to be in a place where I go out and find valuables anywhere
agree, hahahahah
Why do I have the feeling that the chainsaw was intentionally left there and “found” later for this so-called “restoration”?
It’s just for entertainment.
@@gleentm You can see, that the chain is originally put in backwards, so it doesn't cut so well. He actually put it the wrong way the first time.
Theyr rich ass dads probly put them their to be nice. They are so spoiled at least they work
When you first do close ups the chains on backwards.
Yeah he has put on the piston wrong way aswell the arrow on the piston has to point towards the exaust
انك انسان مبدع وصبور وفنان في تجميعه لا تقل مهاره عن الصانع
Rusty chainsaw he going to take it apart clean up restore everything like new again you are the best fixing equipment abandoned bless you
24:38, dont hit inner ring hit at the outer ring otherwise use bearing puller & to avoid contamination to bearing journal open the seal always after the bearing installed
Did you notice the chain was on backwards lol! That's why it was probably left there ,,🤣
yea i agree
th-cam.com/video/c5lnmOqqfZg/w-d-xo.html
One day these guys will restore the humanity
I'm amazed also to the original person who assembled that ..
Your channel has no videos?
@@iraagans3144 so
@@ohyeahgamer3736 I just thought that it was odd that you filmed yourself assembling the chainsaw but didn't post it to your channel?
1:28 No wonder someone left the saw in the woods. The chain was on backwards!
th-cam.com/video/c5lnmOqqfZg/w-d-xo.html
FINALLY FIRST ONE
*Vеry good man👍👍👍*
Ооооо! Какое разнообразие! Он оказывается не только на берегу и на свалках что-то находит! Завидую. Вот у них бензопилы валяются. А у нас только бутылки, сапоги и унитазы. (((( Нет. Вру. Намедни собирал грибы. В получасе ходьбы по лесу от ближайшей дороги обнаружились: стальная эмалированная раковина, эмалированная миска и полусгнившая банка из-под советского паркетного лака. Это ли не странно? ;)
Deixei nosso like somos do Brasil abraço
The piston was installed incorrectly, the arrow on the piston is always towards the exhaust side...
i saw that to
yes..👍👍👍
Fantastic !
I would be so amazed if you restore this thing within the specific time given in the video
Yes a few things don't add up!!
th-cam.com/video/bDDRl1nKFJk/w-d-xo.html Water Pump Restoration
I have don a detailed restoration video in my youtube channel "Workshop media"
Never ever
No
that chainsaw probably is even 10 years old and they immediately ruined it buy putting straight gas in it not 40:1 which that off brand
chainsaw would be
He forgot the oil too lol.
Mantap abis cui
Se for a mesma máquina, está de parabéns o Restaurador. Muito talento.
31:07 I think the piston is not installed correctly...the arrow should point to the exhaust.
I think the same
This guy can disassemble the world with an Allen wrench
👍👍👍👍👍from indonesia🇲🇨
Meus parabéns ótimo trabalho muito bom amei
The piston is installed the wrong side, the arrow is always on the exhaust side.