TCL TV Screen Blinking Flicker Issue Fixed!
ฝัง
- เผยแพร่เมื่อ 3 มี.ค. 2022
- TCL TV Screen Blinking Flicker Issue Fixed!
By taping the ribbon pins 12 and 13 on the ribbon connector the flicker issue on the TCL TV screen can be fixed as shown in this video.
This fix addresses the issue where the tcl tv backlight flickers. No more black screen. - วิทยาศาสตร์และเทคโนโลยี
![ตีสิบเดย์ [FULL] | ครอบครัวสะท้านทุ่ง "นางบี & อ้ายสติ๊ก"](http://i.ytimg.com/vi/A1rhYcxxNtA/mqdefault.jpg)
This is the single coolest, most helpful tech fix I have ever seen on the web. We’ll done, sir!
Thanks for sharing your feedback Will. Do leave a like on the video and do subscribe to the channel.
This worked on my nearly 4 year old TCL 55". It started doing the same thing on the right side of the panel yesterday. One thing that's not mentioned is there's A LOT of screws to remove. Best to mark the pins on the ribbon cable with a fine point Sharpie first. This will give you a better idea of the width of tape to cut. I used electrical tape and believe me it's NOT easy. I didn't get it perfect the first try but using the tip of an Exacto blade to slighlty shift the tape left/right I managed to finally get 12 and 13 covered. Thank you very much for the video, you saved me $ and aggravation!
You are welcome. Thanks for sharing your experience. Do leave a like on the video and do subscribe to the channel.
THIS WORKED FOR ME ALSO. Like @johndate1776 commented above, my TCL (model 55R615) has two ribbons at the bottom of the screen near the IR sensor. Each ribbon has 80 pins. My flashing was on the left half of my screen, so I taped off pins 12 and 13 on that ribbon with simple black electrical tape. Using a reading magnifier, after about 10 cutting attempts, I got sliver of tape just the right size to cover 2 pins. I reassembled, and the flickering is gone.
This video should win an award for the BEST fix-it video on TH-cam!! It is 1) very technical but easy 2) it's free 3) it SAVES the TV from going into the trash, and 4) IT WORKS! Great job. Thank you!
Feedback from viewers like yourself is the biggest reward. Thanks for sharing your experience. Glad your TV is working again. Do leave a like on the video and do subscribe to the channel.
Did u tape on left side strip point 12 and 13 ??
Which ribbon?? The one which is taped in this video.. or the other one which was not taped?
It worked for me. My issue was on the left side of the screen. I used masking tape and the pins where the 69th and 68th(from right to left), if you count the pins from left to right those will be the 12th and the 13th. No flickering after this!! Thanks a lot man, I'm sure this saved me a lot money and weeks without a TV!
You are welcome Gabriel. Thanks for sharing your feedback. Do leave a like on the video and do subscribe to the channel.
What do you mean by masking tape
I am not sure what needs to be done for 12 and 13 pins
@@krishnabhattad3159 use a isolation duct tape like those black duct tapes people use on electric wire, and cover pin 12 e 13 with it
@Gabriel Veras Thank you so much for this comment.
Hey! I just want to thank you for taking the time to make this video. I tried this and it worked like a charm. Finding 12 and 13 was not easy and it was even more difficult to put the tape on. But I'm so glad we live in a time and age where people from different parts of the globe can share their knowledge in this manner. Many prayers and blessings from my side to you! Thank you!
Hi Danish, thanks for the feedback and the wishes. Glad that your issue is fixed. Finding and taping the pins is indeed a challenge. Sincerely appreciate you taking time to describe your experience of fixing it. Do leave a like on the video and do subscribe to the channel.
@@RadnusTechnology which tape i need to use
@@shivatejkumarsangishetti3127 you can use masking tape or electrical insulation tape.
@RadnusTechnology thank you so much for this useful tip. Worked on my TCL 55P6US TV which had a flicker on the LH side. A slightly different circuit but the technique remains the same. Need a lot of of patience and perseverance to put the tape on, but once you get it right, the sense of achievement is absolutely great.
@@shetsanjay you are welcome Sanjay. Thanks for sharing your feedback. Do leave a like on the video and do subscribe to the channel.
This fix worked like a charm for my TCL 55S405. The wiring is a little different on my model, but the idea is the same. Not sure how you figured this out, but I’m glad you did. Thanks!
You are welcome Von. Thank you for sharing your experience of fixing the tv. Glad that your display works again. Do leave a like on the video and do subscribe to the channel.
Bro it actually worked on my 3 year old TCL!! You saved me a lot of money. I'm subscribing to your channel now. Thank you for this info brother! Real Life Saver!
You are welcome. Thanks for subscribing!
Wow, thank you so much. Quite possibly the best 4 minute video on YT I have ever seen. I was prepared to purchase a new TV, chalking it up to burn-in or just a cheap TV. A tip for when I was straining my eyes looking for the 12 & 13th pin - I took a 2x picture on my Iphone and then zoomed in when viewing the picture to blow it up, luckily my cable had blue markings every 5-6 pins that i could use as reference and the 12th pin happen to sit right below one of the blue dots. I used standard scotch tape and cut it with sharp kitchen shears. Thank you!
Thank you so much for the amazing feedback! Appreciate you sharing your experience. Glad you could save your TV. Do leave a like on the video and do subscribe to the channel.
Crazy. It works. Very hard counting the pins and getting the tape on. I asked a family member with more delicate hands and they could do it. It absolutely works though. The flickering stopped. Thank you so much.
You are welcome Barry. Thanks for sharing your feedback. Do leave a like on the video and do subscribe to the channel.
My tcl isn't even 2 yrs old and I have vertical lines along with double imaging. I took a picture of the pins with my cell ( will enlarge the pic ) in the chance I'll be able to count em better.
Big ups my guy! My TV setup was similar to other users with one main picture ribbon that then went to 2 ribbons. The left side was my issue so I followed directions from other commentors. Definitely a precision job but all I can say for others is don't give up! Took several tries but the issue is gone! Thanks again!
Thanks for sharing your experience Jeffrey. Do leave a like on the video and do subscribe to the channel.
My TV also has one main picture ribbon that goes to 2 ribbons. The left side is also my issue. Which pins on which ribbon cable did you tape?
Hi can u me a fvor my tv is the same they flicker on the left side how to block the line?
Omg. I couldn't believe it at first but this worked for my TCL55PUS too... Thank you so much sir for sharing your knowledge with us. My issue was with the left side so I had to do it with the other ribbon like what others said.
It was really hard for me to carry this whole TV by myself as a petite girl and I almost cried trying to unmount then remount it back on the wall cause it was so heavy and it was so hard to position it in place without seeing the wall. Not to mention the difficulty of actually unscrewing everything and doing the fix. By the time I got to the taping part I was sooo exhausted and hopeless I just did what I could and prayed to God it would work and thank God it did. Honestly it may sound pathetic but this is one of the hardest things I've done in my life. But I managed to do it thanks to this awesome awesome video and even more awesome uploader. Omg I could cry. 😭😭😭Thank you so much dear Mr uploader. You saved me!!! I hope you get a million more subs and billions more views. ❤️❤️❤️ May you be blessed with everything you need all the days of your life. I am truly grateful sir 🙏🙏🙏
You are welcome! Thanks for sharing your experience of fixing the tv. It is indeed very challenging to get it right and congratulations on getting it right on the first attempt, you are a champ! These are the kind of experiences that make me want to publish more helpful content to youtube. Thanks for your kind words and blessings!
One year has passed and this trick is still working. Thank you sir!
You are welcome. Do leave a like on the video and do subscribe to the channel.
Sir I cannot thank you enough for this video, it took me a few tries to get it right and i was almost about to give up but what worked for me was that I tried covering one pin to the right and to the left of the 12th and 13th pin using a masking tape.
Bless you for saving all of us a whole alot of money!!!
How to mask it I've literally have no idea and facing this issue 😭 I need help on how to do it
It actually works.. thanks bro! Successful after 3 attempts switching on and off the tv to check. First 2 attempts of using overlapping scotch tapes didn't work. Finally works when I used a masking tape over the 2 layers of tape to fully block the connection. Easier to cut the tapes using penknife and cutting board. And magnifying glass to count the 12th and 13th strip.
Glad your tv is working again. Do leave a like on the video and do subscribe to the channel.
I just did this fix 20 minutes ago. I fixed a Canadian 55R617 (55 inch series 5 I bought in 2020). The ribbon in question was on the T Con board which is located at the bottom middle of the unit when you get the back off. Same idea, count in from the left on the cable until you hit 12/13 and lay down the tape. Took a few tries to get the position right, but it works!
Do leave a like on the video and do subscribe to the channel
Wow, can't believe this worked. I have a TCL 55s423-CA. It's the same fix with the same pins. The only difference is the ribbon cables are at the bottom of the TV instead of in the middle! Thank you so much for the video!
You are welcome. Do leave a like on the video and do subscribe to the channel.
Just worked on my TCL 2019 55" 4k. Incredible fix! Saved me the cost of a new tv!
Do leave a like on the video and do subscribe to the channel.
Brother this fixed my flickering distorted purple image I taped a few pins clamped the one ribbon and it’s gone holy shit I can’t believe it god bless you thank you for this video you’re a life saver brother much love!!
You are welcome buddy. Thanks for sharing your experience of fixing the tv. Do leave a like on the video and do subscribe to the channel.
Thank you for sharing the fix. Was the greatest tip to fix the TV flickering issue. I had the same flickering on the right side in Jun-2024 for my HCL Roku TV. Based on the comments, this looks like a wide spread issue for TCL . Fixed with tape like a charm. Used phone camera to put the tap on 12 and 13 pins. Difficult part was removing so many screws on the back of the TV and putting them back.
All my friends think now I am an TV expert. Thanks again. Saved me a lot of trouble and money. Love from Canada.
You are welcome. Thanks for sharing your experience. Do leave a like on the video and do subscribe to the channel.
Same issue happened to me today .. exact ditto.. and man I don't have words how to thank you. It worked so well and it's back to normal . All thanks to you . Take a bow !!! 👍🏼
You are welcome Manu. Thanks for sharing your feedback. Do leave a like on the video and do subscribe to the channel.
How do you know the ribbon to block and the exact lines to block??? Kindly help
@@arecmoms9196need help ?
Thank you so much sir. It really worked. It was a bit difficult to identify the pins 68th and 69 th and taping them correctly. It completely stopped flickering on the left side while viewing on the front side of the LED TV. You have saved lot of money. This stickering also stopped grey lines appearing on the screen also. Thank you once again.
I have no words!! Saved me a lot of bucks!! I have no idea where you learnt it, but thank you for sharing it online!! It worked like magic!!
You are welcome Tanisha. Thanks for sharing your feedback. Glad your TV is now fixed. Do leave a like on the video and do subscribe to the channel.
Please reply bro I need help for regarding this issue...
Thank You so much brother. I had same issue and for that I found this video. Counting and Taping are the hard part, but what I was mistaking was correctly putting ribbon back on its exact spot. It worked third time and my flickering in my Mi TV was completely resolved. Again Thank you for sharing this video.
You are welcome Malay. Thanks for sharing your feedback. Glad to know that the same fix works on MI TVs as well. Do leave a like on the video and do subscribe to the channel.
Thank you for posting this!! I couldn’t stand watching my TV and no other solutions worked. I did the 68th / 69th pin (from another comment) on the other side since it was my left side. Took me less than an hour. 🤘🏼🤘🏼🤘🏼
You are welcome Elena. Thanks for sharing your experience. Do leave a like on the video and do subscribe to the channel.
how to tape it ? i want to know we have to apply the tap in upper layer or the ribbon pin itself ?
Oh man! You're an absolute legend! Covering pins 67+68 worked on my Mi TV 4X (55). I think it might be pins 12+13 if it's a problem on the right side of the panel and 67+68 if it's the left side. Not sure though, but mine was blinking on the left side. Thank you so very much. You really saved me and all these people a packet of money! God bless you! Keep up the good work.
You are welcome Mani. Thanks for sharing your experience. Do leave a like on the video and do subscribe to the channel.
@@RadnusTechnology how will you know which pin is defective? Mine is left side tcl p6us?
Thanks for your sharing here, i also had the same problem with my Mi TV 4S and taping pins 67+68 fixed it! So happy now.
@@antondavid962 This kind of problem I think is usually associated with these two pins. Pins 12 + 13 from the outside-in on whichever ribbon cable corresponds to the side of the screen that is blinking. Pin 67 + 68 could actually be counted as 12 + 13 from the outside in on the right hand side ribbon cable corresponding to the left side of the screen.
Just a small correction for Left side flickering it's pin no 68 & 69 of left side display.. it's working fine for MI TV 4X (55)..
You are saviour! Tried this with my Android TV which has huge problem than this and it worked! Thanks 🙏
You are welcome Jayesh. Thanks for sharing your feedback. Do leave a like on the video and do subscribe to the channel.
This thing works in a TCL 55 4k! Thank you mate, you saved me some hundreds!
You are welcome Walter. Do leave a like on the video and do subscribe to the channel.
This actually freakin worked!! My TCL HAD THE 2 ribbons at the bottom (near the infrared sensor). Sure enough, took some time to get the tape sliver thin enough, applied on the end of an exacto knife with the help of iphone magnifier on a stand. But wow. 🙏👍👍
Thanks for sharing your feedback John. Do leave a like on the video and do subscribe to the channel.
After multiple tries, it worked! Thank you so much, brother! You saved us a lot of money. Our problem is on the left side of the screen and we used masking tape to block the 68th and 69th pin, took us two hours. Thank you! 🙏🏻
You are welcome John. Thanks for sharing your experience. Glad it's fixed for you now. Do leave a like on the video and do subscribe to the channel.
How you found out it was pin 68 and 69 my bro? What tv brand? I got a sony bravia kdl and also the left side blinks
@@NeMeSis7PT Ours is TCL 55p615. It's the left flex cable, we used a small flat screw to count the gold pins one by one from right to left until we reached the 68th and 69th pin.
@@johnpaulosantos7710 obrigado, mine is different its a Sony it only has 1 ribbon i need to try them out
@@johnpaulosantos7710 Hi. I have exact problem on the left side of my TV. How exactly you are saying to mask 68th and 69th pins? is it by default 68,69? or do I need to mask any other pins as trail and error? please let me know
Hey! This 100% worked and I’m so grateful for the time put into this fix, and the video.
Only fix I’ve found that worked! Well done and thanks for the tip.
Note. Mine is a 55” tcl and the wire ribbons were located and arranged differently than in this video - but I looked for where I could find the “1-80” numbers marked and found it under a panel on the bottom. Removed panel, counted in to 12&13 and it totally worked. First go I saw a pink vertical bar but adjusted and it worked. Thanks again!
You are welcome Dbeirne. Thanks for sharing your experience of fixing the issue on your TV and glad that the issue is fixed for you. Do leave a like on the video and do subscribe to the channel.
Thankyou so much sir...i was facing this issue my full screen was getting dim and bright...i fixed it by your method.... thankyou once again for your information it was really very helpful
You are welcome Afzal. Thanks for sharing your feedback. Glad your tv display is working again. Do leave a like on the video and do subscribe to the channel.
Wow I didn't expect i would find a video addressing this problem. Facing the same trouble with my TCL tv. Thanks for the video!
You are welcome Anupam. Do leave a like on the video and do subscribe to the channel.
I followed all the steps and voila! my tv is working perfectly now!
@@RadnusTechnology liked and subscribed right after watching this video 😃
@@anupamprasad9507 Glad to hear that. Feedback is the inspiration to keep posting more content.
@@anupamprasad9507 which tape did you used
Thankyou so much for this bro. I fixed my TCL tv with this method. But my issue was with left side of the tv flickering. So i taped 12th and 13th pin of the other ribbon connector. Please note u have to count from the opposite side for left side issue
You are welcome. Thanks for sharing your experience of fixing the tv. Do leave a like on the video and do subscribe to the channel.
Thank you!! Sorted mine out finally!!
finally my tv is blinking off At first I did not understand, saw the comments of others and then understood, then I tried and it was done.😇🤗☺Thank you so much 💌💜
You are welcome brother. Sorry about the delay in responding to your comments. Glad that your tv is fixed. Do leave a like on the video and do subscribe to the channel.
this worked for me like a charm. ❤ thank you so much for this video. saved me from buying a new tv. customer service charged 300 for a visit and said to throw it and buy a new one. 😮
It's worked! 🎉 mine is the left side of the screen, hard to count the pin, but I did it anyways and it worked, if yours is left side just count from left to right pin 12-13 cover both with masking tape, that you so bro 🥳
You are welcome. Do leave a like on the video and do subscribe to the channel.
@RadnusTechnology thank you so much for this useful tip. Worked on my TCL 55P6US TV which had a flicker on the LH side. A slightly different circuit but the technique remains the same. Need a lot of of patience and perseverance to put the tape on, but once you get it right, the sense of achievement is absolutely great.
You are welcome Sanjay. Thanks for sharing your experience of fixing the tv . Do leave a like on the video and do subscribe to the channel.
Man i love you, i was about to buy another tv and bro you saved me thanks so much man you are a blessing
You are welcome Rayyan. Thanks for sharing your experience. Glad that your TV is working again. Do leave a like on the video and do subscribe to the channel .
Thank you! It worked for me on my TCL 55". Fortunately, I had a macro lens for my cell phone camera, otherwise my 70 year old eyes would not have seen the pins.
You are welcome. Thanks for sharing your experience. Do leave a like on the video and do subscribe to the channel.
Thanks for the video! Here are a few tips that worked for me.
1. Left side of the tv flickered so had to pull out the opposite ribbon to the one in this video. Then tape pins 68 and 69 (like others have said)
2. Counted the pins by listening to an exacto blade go over each one. Was much easier to count the clicking sound and feel than counting just with eyes.
3. I put blue marker on the tape so I could see the tape better and make sure I covered correct pins.
Really happy I found this video. Now just have to wait and see if the right side fails too. Not a good sign there have been so many people with this problem. TCL👎
Thanks for the detailed feedback Josh. Some very useful tips indeed. Glad your tv is fixed. Do leave a like on the video and do subscribe to the channel.
my tcl has flickering on left side too, which ribbon and pins do i look for? how do i know it's the right part
Im also having the left side problem which pin for the left side please ??
I will be so thankful
@@babyboykevin4868/69 pin
My problem is from left side flickering ,I blocked pin number 67 and 68 it works for me .
Thanks so much
You are welcome. Do leave a like on the video and do subscribe to the channel.
My left side was flickering
Much much much thanks after trying 8 times I accurately applied tape to 12 and 13th pin and wallah it's working like a charm
Thankssss love from Pakistan
You are welcome. Glad your tv is working perfectly again. Do leave a like on the video and do subscribe to the channel. Love form India !
This worked for my Iffalcon 55k2a TV too. Though I'm not sure enough that I've taped the exact 12 &13 pin as it was really tough to pin point them. However it worked for my TV. Thanks for the video guide.
You are welcome. Do leave a like on the video and do subscribe to the channel.
Bro tell the pin numbers. I have flicker on right side. Same TV
@@sundaraprakash its 12 & 13
Omg got a free 55 tcl TV and fixed it in one day from this video ... thanks so much ... appreciate the video
You are welcome. Do leave a like on the video and do subscribe to the channel.
Done both . Thanks.
Man.. cant thank u enough.. it works...it was difficult .. preferable to have good lighting and a magnifier... the video is very helpfull!!! Thanks again
I'll try this as well. My TCL started doing this 2 weeks after the warranty expired. Crazy.
Good luck Joel. Let me know how it goes. Do leave a like on the video and do subscribe to the channel.
Good day! How did you know the defective is 12 & 13??
My Roku 55" TCL 55C803 4K UHD HDR has the problem where the top 1/2 or 1/3 of the screen has continual rolling up of a lighter screen. Any suggestions? The TV is about 5 years old. I went thru troubleshooting with TCL to no avail. Thx
Alright I managed to fix it for those TVs with only 1 ribbon cable when opening the main plastic compartment.
You HAVE to open the bottom plastic cover to be able to see those 2 ribbon cables because the main plastic cover doesn't show the 2 cables, only one!
Managed to fix it first try using the video shown here. Same method, you have to put tape on Pin 12 and 13 with the black isolation tape that came all over the TV.
I have a Xiaomi Mi Tv 55' 4s
Edit: thanks to the uploader for the tip and actually share it with everyone for free! Without this, people would have bought a new TV. Who says hero's wear capes!! A big thanks to you kind sir
Thank you for sharing your experience of fixing the issue. Glad to know that your TV is working fine now. Do leave a like on the video and do subscribe to the channel.
@@RadnusTechnology Done, a like and subscribe well deserved. Wish there were more helpful videos like these on TH-cam.
Your mi TV cable was it a 60pin or 80pin? My TV also mi 55 4S. But is not 80pins like in the video.
@@deantang1267 doesn't matter, just tape pin 12 and 13. Trial and error, took me like a full hour to figure it out and it has been working flawlessly ever since. Still amazed how the tape is still holding up
It actually worked. Mine was a Xiaomi 55inch. Thanks man…
You are welcome Lawrence. Do leave a like on the video and do subscribe to the channel.
This just happened to me, and voila, this video saved my TV. Many thanks for your help!
You are welcome. Do leave a like on the video and do subscribe to the channel.
Seems like is happening to alot of people, around the same time
Indeed. Do leave a like on the video and do subscribe to the channel.
Yea literally just started 2 days ago for me
The same issue started on my tcl tv, just today. Blinking half right side with a horizontal line at the top. Tried a soft and a hard reset, issue still occurring. It happened all of a sudden, might be just after mirroring from Prime tv on my phone.
How lucky would I be if the issue gets fixed by itself..
Two week
@@mohamadshatila862 think I found a solution, turn the brightness down to normal or low
So amazing! It works on my 55P6US. I've subscribed your channel. Thanks a lot again!!
You are welcome. Glad that the issue is fixed on your TV. Thanks for subscribing.
Hi this fixed my flickering problem thanks so much I still have horizontal lines at the top and bottom of the screen and now the right side is not as sharp looking as the right but is very useable but I would like to know which pins are responsible for that
Fixed my TV just following this video. Saved me a bunch of money! 10/10 would recommend everybody facing the same issue to try this
Thanks for sharing your experience. Do leave a like on the video and do subscribe to the channel.
You are a genius ❤️. It worked absolutely fine. I followed all your steps. Thanks for saving my 25000. 🙏🙏
Hi Nishank, thanks for sharing your feedback. You are most welcome. Do leave a like on the video and do subscribe to the channel.
@@RadnusTechnology liked and subscribed
Thanks a lot bro , solved the issue . Though searching for 12 & 13 pin was tough . Black tape did my job .cutting such thin tape and pasting was tough though . Thanks a lot for such guiding and descriptive video
You are welcome. Glad your tv is fixed now. Do leave a like on the video and do subscribe to the channel.
@@RadnusTechnology ok bro
Just pulled my TCL off the wall and taped the 12th and 13th contacts on the right screen ribbon. Worked like a CHARM! Thanks for putting this video up, sooooo tired of seeing my TV flicker!
Your instructions are so clear that I was able to pull it off first try, but man those ribbon contacts are super small.
You are welcome. Thanks for sharing your experience. Do leave a like on the video and do subscribe to the channel.
Means how to tape that
@@Vhanmuzic1use small paper tape.
4/2023, Element TV. I was beyond skeptical but this actually worked!
Glad that you were able to get it fixed. Do leave a like on the video and do subscribe to the channel.
Great job. I had to do something similar. It’s usually a blown pixel messing with the clock signal. Blocking off one the pins bypasses this. If you look closely at your screen you may notice one pixel line greyed out, but the rest of the screen works perfectly well. TCL panels seem to have this issue, BOE and AU Optronics panels seem spared. Good job making this content accessible.
Thanks a lot man, i taped number 12 and 13 as you said works like a charm !
TCL 55p8M
You are welcome Nadhem. Do leave a like on the video and do subscribe to the channel.
I have a TCL 55DC748. For a while it showed the same small icon, your screen shows in the bottom left corner. A white square with three slashes and a red box in the top right corner of the white box. It flashes. Initially I got rid of it by unplugging the tv for 10 minutes and plugging it back in. This would be ok for a week and then it would return. Now my screen has started flicking, then it had a complete scrambled screen. Again, I turned off, left it for a while and turned back on. The screen had stabilised but every other day the problem returns. The icon in the bottom left corner remains until I turn it off for 10 minutes or so. How did you get ride of the icon in the bottom left corner?
After trying for an hour to count pin 12 and 13 finally got it and fixed my tv
Awesome. Do leave a like on the video and do subscribe to the channel.
What does the 12th and 13th ribbon do? My tv has the same issue and I am going to work on it today.
Thank you so much! You saved my 55" TCL ❤
You are welcome. Do leave a like on the video and do subscribe to the channel.
I had the same problem for months now thought it was a backlight problem, was searching for the wrong fix. I worked thanks but i was little late i guess😢 currently have some lines on the bottom half of my screen. Great vid though thanks
You are welcome Romero. Thanks for sharing your feedback. Do leave a like on the video and do subscribe to the channel
Thanks, It actually worked. After a few tries able to mask the pins and it worked for my iffalcon 55 inch LED TV
You are welcome Sivacoumar. Thanks for sharing your feedback. Do leave a like on the video and do subscribe to the channel.
I am also facing problem in iffalcon 55 inch . Could you please let me know the pin numbers you blocked to stop the flickering .Thanks.
maybe you can tell me wich flex black or white and wich pins will work in TCL U55C7026 will work your method?
It actually works also on Xiaomi TV. Thank you! It just saved my TV
You are welcome. Do leave a like on the video and do subscribe to the channel.
Which pins did you tape? Left side of my screen is flickering. (MITV 4X 55 in)
Hello! Thanks for the video. What would be the solution besides taping (actually replacing the faulty component). Which component would it be? Thanks!
Worked for me, had right side flickering and some lines on the very top of the screen. Just make sure - as you turn the TV to work on it - to put the tape on the right ribbon, lol.
Was a Mi TV btw
Thank you very much
You are welcome. Thanks for sharing your experience. Do leave a like on the video and do subscribe to the channel.
Aloha I have a TCL TV it is slightly different to yours , mine has 100 pins on each ribbon cable do you know if the same pins 12 & 13 work on the wider ribbon cable . Thanks
I cant believe it actually works!! Thanks!!
You are welcome. Do leave a like on the video and do subscribe to the channel.
Hello sir. Very informative and helpful video. I have black horizontal flickering Line on the top right of my tcl. What pins are associated to that part? Thank you
I thought i need to spend thousands to resolve this issue! This helped me so much! Thanks much buddy! Btw how did u know it's 12 and 13th pin causing issues and covering those with tapes will cause difference in display clarity?
You are welcome Surya. Pin identification was done by troubleshooting each pin. Do leave a like on the video and do subscribe to the channel.
thank you my man, i did it and works like magic! by the way, is your TV still works from the moment you uploaded this video till now?
You are welcome buddy. Thanks for sharing your feedback. Yepp my TV still works, no new issues after the taping. Do leave a like on the video and do subscribe to the channel.
Thanks! This worked on my tv. I had a different setup with 2 short blue ribbons but it still worked.
Hi, can you please tell me what pins 12 & 13 were called on the tcon as I have a similar issue with a different tv.
Getting the same issue but on the left side of the screen. Any help with the pin selection for the left side?
Thank you very much for your super tip in tcl Tv
You are welcome. Do leave a like on the video and do subscribe to the channel.
My TCL has these ribbons located at the bottom but they appear to be hardwored into the circuit board, no little flap that can be lifted to then pull the ribbon out. Any solutions for this? TIA
Will you clarify me one thing?
Is is an issue with the ribbon or a circuit board problem? I am getting this 80 pin ribbon on amazon so if i replace the ribbon will it work or taping is the only solution. My tv is now out of warranty so i dont want to call service centre they will charge more
Sou do Brasil e esse vídeo me ajudou muito, funcionou perfeitamente. Muito obrigado
De nada Johnny. Deixe seu like no vídeo e se inscreva no channel.
Thank you so very much...! The troubleshooting tip really worked!
You are welcome Raj. Do leave a like on the video and do subscribe to the channel.
My TV is doing this. I'm going to have to try this. What do pins 12 & 13 do?
I have yet to try this "fix", maybe tomorrow. However what are pins 12 and 13 actually for? I assume they are meant to do something, so disabling them by covering them has no negative impact? Just curious
I have a 55R615 and the entire screen flickers but not always. It flickers about 30% of the time. Any suggestions?
The same fix worked for MI 54 inch .. thanks
You are welcome. Do leave a like on the video and do subscribe to the channel.
What type tape you use to solve this problem tell me
@RadnusTechnology
my tv is flickering on the right side and its a samsung tv what should i do?
Please help me with my tv. My problem is the top portion on both sides left and right which pins i need to tape.
Hisense 55N3000UW. It was driving me crazy. Covered pins 68 and 69. Had to use a microscope to see and cover the correct pins. Worked like a charm. BUT WHY? I'd really would like to know. Thanks anyway. This was a fantastic fix.
You are welcome. Do leave a like on the video and do subscribe to the channel.
I can't do it!!! Thank very much for the video though. It seems to have helped a lot of people with the same problem.
Oo man... You are a saviour. It worked like magic. Thank you so much
You are welcome. Do leave a like on the video and do subscribe to the channel.
Thanks a lot for this trick this worked amazingly to my TCL 55 inch tv it was flickering opposite side so i masked on 68 and 69 its second cable and if u count from the end its 11 and 12 for me
You are welcome Sridhar. Do leave a like on the video and do subscribe to the channel.
Posted my comment in the wrong section. Moved it here. Original comment below.
Hey! Wanted to say thank you so much! I'm extremely glad I found your video! You saved me a couple hundred USD. Your fix seems to have solved my flickering issue on the right side of my 55inch TCL Roku tv. Hope this fix lasts. Thank you again.
P.s. How did you know it was pins 12 & 13? And what do they control? I'm very curious.
Hello, glad to know that your TV display issue is now fixed. Thanks for sharing your experience. With regards to the pins, each pin controls a different function of the display and the flicker issue is related to malfunctioning of the automatic backlight control and by taping the pins that control this feature we are in a way disabling the feature that is malfunctioning. You will still be able to control the backlight through settings.
Hi. I have a doubt my tv flickers from center to top. So for this how to find which pins to tape? Thank you
Very good bro, this works in Sony bravia kdl led tv also numbers 12 and 13? Cheers bro