This video is great! Buying a 2000 Ford Ranger soon as a second vehicle. I like all the customization you did. Especially the weight reduction on the bumper.
Custom Offsets I don't see why not. shoot me the number to your favorite pizza place and I'll make it happen. I'll be up there in 2 days for the truck 😂
I have a 2003 FX4 Level II. The truck came from Ford with 31 X 10.50's. Did Ford do something different to these to get the tires to fit? I was under the impression that 31 X 10.50's would fit all 4WD's of this series/ generation. Would not have thought this guy would have to do anything to fit them on his truck.
Hey Custom offsets, I purchased the Federal Couragia Mt 31"x10. They rub at full steering wheel turn. I have a 3 inch lift and 1.5" spacers. What would you recommend? (Ps I can even spaced and lifted the bumper seems like tires are hitting sway bar)
I saw you have the 15x8 5x4.5 -29mm Rims on your website. Would that stick out too far with my 1.5 inch spacers? I don't want to put to much wear on ball joints. You have some nice rims on your website 👍 I have a 2005 Ranger 2WD v6.
i recently got a 2003 ranger fx4 level II. looking for wheel with decent lip depth with factory lift (none). so hard to find and like what i see here. big help
rt40ish I have same year and level 2 as well, I put a body lift on it and running 33s on the stock Baja rims, it blew a head gasket a few days ago though so it’s down for the count for a little while, careful those level 2s have notorious transmission issues with the 4.10 gears. I already had to rebuild the trans once and it only had 98k on it then
@@tusengwu5624 transmission was recently rebuilt as the guy told me I bought from. Needs new clutch now. Just put new wheels and tires. Awesome look and drive. No lift
rt40ish It’s a manual? Those level two manuals with the duel manual trans plus transfer case are hard to come by and are rare and sought after as well, mine is automatic
I have a 2004 Ford Ranger Xlt I don’t wanna lift it if I don’t have too I just wanna make it look lifted it’s stock rn what’s the biggest tire size I can go
I wouldn't recommend it if you actually drive the truck, and quite honestly, I don't see how that's possible. I had an 06 4x4(no flares) with a 4 inch superlift that cleared 33x12.50 on 15x8's, and I still had minor rubbing at full lock. These trucks are tiny, it takes a lot of lift to properly fit a 33x12.50. Before my lift, I had the torsion bars maxed out and my 32x11.50's required trimming and still rubbed. Hardly any wiggle room to actually take it off the pavement..
jonnyjb69 you failed to mention what the offset you had with those 33x12.50's. Stock rims won't work with 33s. Major trimming would be needed if you didn't lift/crank it.
I have a Chevy Colorado 4 wheel drive with stock 15 inch wheels but bigger and wider tires on it but i want my tires to stick out more the place i went preferred. 15×8 offset wheels i was wondering if that would make them stick out good or should i go 15×9
I have an 03 ranger i was thinking about doing a set up like this on, i want to keep it at stock height but want to get the biggest i can without rubbing or anything. Any advice?
Love how he says "beater truck" you know damn well he's so proud of it and thinks it's badass. But since he's on video he's gotta act like it's a beater since he can't afford a better truck 🤣
It means cranking your torsion bars up, we don’t typically recommend this as it causes a rough ride and lots of extra wear and tear. Installing a proper leveling kit is the way to go, but this way is practically free!
@@CustomOffsetsTV As if leveling kits don't? No one should be getting a leveling kit if they don't want extra wear and tear on their front end, and at least a torsion crank is free. You obviously need a suspension lift to avoid wear and tear (except driveshaft, which is unavoidable).
With his offsets no. Im running stock steelies and mine dont touch. His are pushed out further. So, by that logic the contact radius or potential contact radius is reduced further. So. No. But its another story on a 2wd.
funny at beginning of clip bad ass truck. well I would not change my 2001 XLT 6 foot bed 4.0 motor 5 speed trans for anything, its comfortable economical, and everything is easy to work on exept around motor, still runs solid no rust from south texas, yep am keeping her I love no payments also :-)
Check our gallery out here for fitment on your ranger! www.customwheeloffset.com/wheel-offset-gallery?make=Ford&model=Ranger&tire_height_from=235&sort=date
Custom Offsets I want to get one as my first truck. But it’s kind of hard to find a decent one, they usually have a ton of miles and still cost around $4k?
"Hey guys this is my beat to shit truck, oh yah btw I’m rich or what ever, na I totally don’t drive this thing, only sometimes maybe daily, not by choice ofcourse, but definitely everyday, everywhere" If you got it, you got it, if you don’t, you don’t.
Dude I owned that model ranger. It had the 3.0 v6 that's what that dumbass leaf means on the tailgate. Absolutely the worst engine I ever drove. Truck had no balls at all. I blew the transmission. It definitely is a beater truck.
Jarred Monaco my brother had a 99 with an automatic brand new off the lot. it was the only truck that needed 3 transmissions before 100,000 miles so because of the lemon law he was allowed to return it for a full refund
I believe it man. Out of all the little trucks I had it was horrible. The 4.0 was so much better for a v6. I don't have to worry about that now cause I upgraded lol. V8.
Best video ever seen from custom offsets, bad ass ranger!
This video is great! Buying a 2000 Ford Ranger soon as a second vehicle. I like all the customization you did. Especially the weight reduction on the bumper.
I love how Shawn is creating a bunch of warriors - Good stuff brother -
i stopped watching when he pulled the $100 bill out
Tanner Lynch idk why I always need to be flexed on
same
I dint even notice it was a 100$ bill to be honest till now that u mention it.
Fuck $100 bills
Its just a $100 dollars also
Gotta flex with that 100
Missin' my Ranger watching this, had the same year and trim level.
I'll buy it just so I can keep miles off of my Tundra. gotchu with $40 and a large pizza with up to 3 toppings. just let me know
Custom Offsets I don't see why not. shoot me the number to your favorite pizza place and I'll make it happen. I'll be up there in 2 days for the truck 😂
Not a bad looking beater truck!!
So this won’t fit on 2000 ford ranger XLT 2wd?
🤣 Thanks for the laughs. "Custom job" fender and scratch...classic. 👏
anyone know where to find the money?
They are bad ass. A sleeper truck if you get the FX4 LEVEL UP II
I have a 2003 FX4 Level II. The truck came from Ford with 31 X 10.50's. Did Ford do something different to these to get the tires to fit? I was under the impression that 31 X 10.50's would fit all 4WD's of this series/ generation. Would not have thought this guy would have to do anything to fit them on his truck.
Where do you get that raptor style ranger decal because that’s the best one I’ve seen and I’m looking for one atm🤔
We'd try googling it man! Ask forums, Facebook groups etc!!
At least a budget friendly set up for my dream truck
Got a 1996 jeep xj but I wish I got a ranger
Does 31x10R 15 could fit on a 1998 explorer without suspension work... need to know guys please
Email us at sales@customoffsets.com, and our experts can try to help you out! 🤗
31x10.50r15s under my 98 offroad.. No lift. I hate the 3.0 though..
PureCountryof91 what’s wrong with the 3.0?
Love cheap trucks! The normal guy can buy one with money left in his wallet!
my old explorer is like that too. i love taking it snowboarding going up in the mountains.
Hey we’re you get the monster overlay
What kind of fender flares are those
What if you don't have cranked keys? I have a stock 2001 4x2 Ranger XLT 3.0L V6. Curious if I could fit the same wheels and tires and offset?
im going to do this to my truck after watching this
DO IT 🤙
Hey Custom offsets, I purchased the Federal Couragia Mt 31"x10. They rub at full steering wheel turn.
I have a 3 inch lift and 1.5" spacers.
What would you recommend?
(Ps I can even spaced and lifted the bumper seems like tires are hitting sway bar)
I saw you have the 15x8 5x4.5 -29mm Rims on your website.
Would that stick out too far with my 1.5 inch spacers?
I don't want to put to much wear on ball joints. You have some nice rims on your website 👍
I have a 2005 Ranger 2WD v6.
Shoot us an email to info@customoffsets.com so an expert can help you get the perfect fitment! 🤘🏼
How do you crank the stock keys
i recently got a 2003 ranger fx4 level II. looking for wheel with decent lip depth with factory lift (none). so hard to find and like what i see here. big help
rt40ish I have same year and level 2 as well, I put a body lift on it and running 33s on the stock Baja rims, it blew a head gasket a few days ago though so it’s down for the count for a little while, careful those level 2s have notorious transmission issues with the 4.10 gears. I already had to rebuild the trans once and it only had 98k on it then
@@tusengwu5624 transmission was recently rebuilt as the guy told me I bought from. Needs new clutch now.
Just put new wheels and tires. Awesome look and drive. No lift
rt40ish It’s a manual? Those level two manuals with the duel manual trans plus transfer case are hard to come by and are rare and sought after as well, mine is automatic
I have a 2004 Ford Ranger Xlt I don’t wanna lift it if I don’t have too I just wanna make it look lifted it’s stock rn what’s the biggest tire size I can go
Check out our gallery to find what look you like! customoffsets.com/gallery
31s
With 2in blocks and a 2in body lift my ranger fits 34.5’s no problem
I had the same body style ranger. Take off the fender flares are you can fit 33x12.50s on 10" wide rims
I wouldn't recommend it if you actually drive the truck, and quite honestly, I don't see how that's possible. I had an 06 4x4(no flares) with a 4 inch superlift that cleared 33x12.50 on 15x8's, and I still had minor rubbing at full lock. These trucks are tiny, it takes a lot of lift to properly fit a 33x12.50. Before my lift, I had the torsion bars maxed out and my 32x11.50's required trimming and still rubbed. Hardly any wiggle room to actually take it off the pavement..
jonnyjb69 you failed to mention what the offset you had with those 33x12.50's. Stock rims won't work with 33s. Major trimming would be needed if you didn't lift/crank it.
Where did you get the sticker for the rangers bed
finally a spotlight.. love to see more editing :)))
Where did you get the sticker decal on the bed panel
What are the best tires for an 05 ranger for highway and snow, while keeping the truck the stock height.
A good set of all terrains would be stellar orlando
Goodyear duratracs are the shit.. I love them for highway snow and mud
I have a Chevy Colorado 4 wheel drive with stock 15 inch wheels but bigger and wider tires on it but i want my tires to stick out more the place i went preferred. 15×8 offset wheels i was wondering if that would make them stick out good or should i go 15×9
Check our gallery out here for fitment help here - www.customwheeloffset.com/wheel-offset-gallery?make=Chevrolet&model=Colorado&sort=date
Where’d you get the monster sticker for the ford emblem?
had it laying around the shop from a Monster rep, but you can find them on Amazon/Ebay
Link to the ranger sticker?
hi i have a 2004 ranger levell edition i bought some rims for it but the hub opening on rims is alot bigger but they bolt on fine is that safe?
How much for those 15 by 8 inch rims shipped to Florida? Need some asap
free shipping! links are in the description!
Review 15x8 on 33s?
Thanks
How many inch lift is that
Look's like it has stock suspension
Will this setup work on a 2001 Ford ranger supercab 4x4?
Yes you would have minor trimming and slight rub at full turn! This ranger has the same specs! bit.ly/2T5ifa1
I have an 03 ranger i was thinking about doing a set up like this on, i want to keep it at stock height but want to get the biggest i can without rubbing or anything. Any advice?
Catch Nosaed lol I’m trying to do the same. Any luck with tire/wheel combos?
is that truck black or is it the deep wedgewood blue?
Black, just old paint
“I’ll tell you what, for cheap tires, they do exactly what cheap tires need to do” whaaaaa? What does that even mean.. 🤔
Theyll get you down the road, through the mud, and for half the price of expensive tires!
Custom Offsets ahhhhhh! I understand now!
What about your gears?
Love how he says "beater truck" you know damn well he's so proud of it and thinks it's badass. But since he's on video he's gotta act like it's a beater since he can't afford a better truck 🤣
What does "cranked up they keys" mean? I have the same truck and want a similar setup.
It means cranking your torsion bars up, we don’t typically recommend this as it causes a rough ride and lots of extra wear and tear. Installing a proper leveling kit is the way to go, but this way is practically free!
@@CustomOffsetsTV As if leveling kits don't? No one should be getting a leveling kit if they don't want extra wear and tear on their front end, and at least a torsion crank is free. You obviously need a suspension lift to avoid wear and tear (except driveshaft, which is unavoidable).
I don't have a 100 $ bill to measure with, could you use a $5 or possibly even a $1
Measures the same
Do the 31's rub at all? What lift did you say you had if any?
Keys are cranked and no it did not rub.
At full lock did the 31s contact the sway bar?
With his offsets no. Im running stock steelies and mine dont touch. His are pushed out further. So, by that logic the contact radius or potential contact radius is reduced further. So. No. But its another story on a 2wd.
would 31's fit on a stock ranger with a 15x8 rim and 2.5 inches of backspacing?
Mountain_Man hells yeah man mine is a 04 ford ranger edge cracked keys 2.25 lift with LT265/75/16 which I think measures a 31x 7 on rims are stock 16s
Looking for a good site for a truck bed help please
my boys got bank
What's the lift on it?
Here's the link to it in our gallery! bit.ly/2s4ybOF
where can I pick up those wheels and tires?
link is in the description for you!
Boss move using that bill to measure the wheel lmfao
Stillfor sale?
funny at beginning of clip bad ass truck. well I would not change my 2001 XLT 6 foot bed 4.0 motor 5 speed trans for anything, its comfortable economical, and everything is easy to work on exept around motor, still runs solid no rust from south texas, yep am keeping her I love no payments also :-)
265/75/16
31.7/10.5/16
Where can I get the ranger decal ?
Our sticker guy made it, shoot us an email to justin@customoffsets.com to see if he can make another!
Intro song?
That tire is that I got and it’s a 32 they fit great
Could probably fit 32s with those cranked keys
Anyone know where to get the decal?
we made it in house CpTn! shoot us an email to justin@customoffsets.com
@@CustomOffsetsTV still able to do that? Lol
Someone wants to sell me 235/70/16 I think they will rub. Will they fit? I got 99 ranger
Check our gallery out here for fitment on your ranger! www.customwheeloffset.com/wheel-offset-gallery?make=Ford&model=Ranger&tire_height_from=235&sort=date
when his beater truck is nicer than anything I own...
Are they reliable?
Yes they are normally!
Custom Offsets I want to get one as my first truck. But it’s kind of hard to find a decent one, they usually have a ton of miles and still cost around $4k?
This truck was $900 👍🏻
It really depends on where you live, prices vary state to state!
I bet that dude was waiting his whole life to show off that Benjamin
Aura RC wasn’t even mine, had to borrow it. -Fuller
I think they have a pretty succesfull and reputable buisness..usually money follows success so i dont think they have any problems getting benjamins..
How do I get them decals
email justin@customoffsets.com!
Where can I find that ranger xlt graphic sticker
email justin@customoffsets.com Carlos
"Hey guys this is my beat to shit truck, oh yah btw I’m rich or what ever, na I totally don’t drive this thing, only sometimes maybe daily, not by choice ofcourse, but definitely everyday, everywhere"
If you got it, you got it, if you don’t, you don’t.
How can I buy the Ranger xlt decals
Our vinyl guy cut these for us, if you'd like a set shoot our vinyl guy an email! justin@customoffsets.com
Custom Offsets oh ok thanks man
2:24 cute tramp stamp 😂
No way my ranger is the same year black and has the same dent
Is it me or does he remind you of Ben
Lets see some more Tacomas!!
custom offsets custom offsets
This video is should have been on April 1st.
Ever since what_stance modded his ranger, ive seen alot more ranger stuff than usual.
Jesus Christ ive heard it all, shameless self promotion with the tinder profile lol
my beater truck bought it for a couple hundy but it's urs for 2500 lol
I stop talking when people call nice rangers their beater😂 mines a daily AND a beater
I bet you went to the bank and specifically requested for that 100$ bill just for this video
Dude I owned that model ranger. It had the 3.0 v6 that's what that dumbass leaf means on the tailgate. Absolutely the worst engine I ever drove. Truck had no balls at all. I blew the transmission. It definitely is a beater truck.
Jarred Monaco my brother had a 99 with an automatic brand new off the lot. it was the only truck that needed 3 transmissions before 100,000 miles so because of the lemon law he was allowed to return it for a full refund
I believe it man. Out of all the little trucks I had it was horrible. The 4.0 was so much better for a v6. I don't have to worry about that now cause I upgraded lol. V8.
Actually the little leaf on the back means it's flex fuel..I have a 2000 and it's flex
I have Ford Everest
I hate all lift kits.
😨
$2500 LMAO
His profile says male seeking men
Anyone know where I can find that decal?