TALARIA Sting Electronic Power Pedal Kit Installation Video

www.kaniwaba.com
www.kaniwaba.com/talaria-stin...
YOU MAY EASILY CHANGE BETWEEN PEDALS OR PEGS WITHOUT UNISTALLING THE KIT
PRODUCT INFORMATION
Carefully designed Pedal Kit for the Talaria Sting.
What YOU get:
Strong. Left and right side brackets are made of a single piece to stand drops and tough conditions!
The TALARIA Sting Power Pedal Kit V3.0 plus the Electronic Pedal Assist Upgrade.
This pedal kit WILL propel your ebike both mechanically and electronically. You get a carefully designed sprocket set to install on the gearbox's output shaft WITHOUT UNINSTALLING IT, a high quality freewheel with hub, a 36 link bicycle chain with master link so you can easily install on uninstall, a 3 position switch, a controller, and a cadence sensor with fixing bracket!
Cadence sensor to detect pedal speed.
Three Position Handlebar Switch: Throttle only, pedals only or both (greater speed between pedals and throttle), the system will compare and transmit to the controller the higher speed.
Compatible with chain or belt drives
A pedal kit that lets your rear suspension WORK. The original pedal kit is located directly on the rear swingarm, therefore it does not spring your weight... you will feel the difference immediately going over obstacles, plus the turning is greatly improved!
Compatible with chain or belt drives
Chain guard must be removed
Plug and Play pedal kit fixed to the frame! You just disassemble the existing side brackets and install the pedal kit.
Easy setup. Adjust the kit to your bike using the stainless steel collars. You may easily change between pedals or footpegs (and you have two footpeg positions!), crank puller needed. Just install the footpegs or the cranks without removing the pedal kit, you can also remove the spindle. You choose!
Maintenance free. New design is maintenance free since it has sealed cartridge bearings.
Brace bar. Also works as a brace bar
Reduced wobble. Little to no wobble of the chain and improved in this V3.0, since it is not connected to the main drive chain, a common problem with the OEM kit.
Cranksets compatible. This kit is compatible with JIS square tapered cranksets, no major crank offset is required. If the crank has no offset, the maximum compatible length is 160mm. OEM Crankset is compatible.
Aluminium made in order to reduce weight. With a weight of around 4.3 Lb (2.0 kg). The spindle is made of stainless steel.
Durable Materials. Parts made of aluminum and stainless steel. It will last a long time.
OEM Look. Discrete installation, all cables hidden!
Propels the bike using the bike's battery.
* With original sprocket, original controller, and flat road.

[@yourfactstory]

Thanks!

[@tiggerhummer1]

My talaria seems to have a longer shaft that the chain, and motor sprocket goes on.

[@Josho67]

Could you just put the two gears together where the surclip is and slide it on instead of trying to do in the small space?

[@leistungep3]

Can you just install the the electronic power kit without the mechanical power kit? If you don't want the extra chain and sprocket ?

[@kaniwaba]

Yes! That would be the Electronic Pedal Kit:
th-cam.com/video/nAy_sa4R4XY/w-d-xo.html
Product: www.kaniwaba.com/product-page/electronic-pedal-kit-v3-0-for-talaria-sting

[@chonk1221]

​@KANIWABA does this still count as "operable pedals" with just the electronic assist? I'm in Florida btw

[@AAs-vb7pv]

Can you put longer crank arms on this axil

[@kaniwaba]

Yes you can! Any crank with a JIS square tapered fitting will fit. Although we recommend shorter cranks to have good ground clearance.

[@joeydube420]

does this or is this compatible with most talaria bikes like the "XXX"?

[@kaniwaba]

Each bike model has its kit, the one for the Talaria XXX is expected to be available late september!

[@michaelmccoll6618]

link dose not work

[@masterchief1783]

Will this work on a mx4 ?(the pedal kit)

[@Ed.die666]

Good question. Was just wondering that

[@3spriggs3]

I’m going to install on my sting r today

[@justinmorales4201]

@@3spriggs3 did it work?

[@Ed.die666]

​@@3spriggs3 what's your thoughts? Thank you

[@chonk1221]

​@3spriggs3 what connectors did you connect it too?

[@felixbuisson]

Enlever le swingarm

[@kaniwaba]

Bonjour Marco! C'est autre possibilité. Un peu plus de travaille mais il fonctionne. A+

[@MrErichonda30]

Put me to sleep. Could have been a shorter video.

[@kaniwaba]

Hi! Thanks for your observation. All of our customers have different knowledge so we try to be as inclusive as possible and address all needs! 🙂

[@ParaFox404]

​@KANIWABA I think that's a good mentality, try having a summary of what you need to know up front short and sweet, then have the video continue in depth past that so people can get valuable info right away and those that want or need more can keep watching