KANIWABA - TALARIA Sting R MX4 Electronic Power Pedal Kit and Power Kit Installation Video
ฝัง
- เผยแพร่เมื่อ 6 ต.ค. 2024
- www.kaniwaba.com
Carefully designed Pedal Kit for the Talaria Sting R MX4.
What YOU get:
Strong. Left and right side brackets are made of a single piece to stand drops and tough conditions!
The TALARIA Sting Power Pedal Kit V3.0 plus the Electronic Pedal Assist for Talaria R MX4 Upgrade.
This pedal kit WILL propel your ebike both mechanically and electronically. You get a carefully designed sprocket set to install on the gearbox's output shaft WITHOUT UNINSTALLING IT, a high quality freewheel with hub, a 36 link bicycle chain with master link so you can easily install on uninstall, a 3 position switch, a controller, and a cadence sensor with fixing bracket!
Cadence sensor to detect pedal speed.
Three Position Handlebar Switch: Throttle only, pedals only or both (greater speed between pedals and throttle), the system will compare and transmit to the controller the higher speed.
Compatible with chain or belt drives
A pedal kit that lets your rear suspension WORK. The original pedal kit is located directly on the rear swingarm, therefore it does not spring your weight... you will feel the difference immediately going over obstacles, plus the turning is greatly improved!
Compatible with chain or belt drives
Chain guard must be removed
Plug and Play pedal kit fixed to the frame! You just disassemble the existing side brackets and install the pedal kit.
Easy setup. Adjust the kit to your bike using the stainless steel collars. You may easily change between pedals or footpegs (and you have two footpeg positions!). Just install the footpegs or the cranks without removing the pedal kit, you can also remove the spindle. You choose!
Maintenance free. New design is maintenance free since it has sealed cartridge bearings.
Brace bar. Also works as a brace bar
Cranksets compatible. This kit is compatible with JIS square tapered cranksets, no major crank offset is required. If the crank has no offset, the maximum compatible length is 160mm. OEM Crankset is compatible.
Aluminium made in order to reduce weight. With a weight of around 4.3 Lb (2.0 kg). The spindle is made of stainless steel.
Durable Materials. Parts made of aluminum and stainless steel. It will last a long time.
OEM Look. Discrete installation, all cables hidden!
Propels the bike using the bike's battery.
With original sprocket, original controller, and flat road.
Cranks not included in this version unless added.
Pedals not included in this version unless added.
@kinawaba Any approximate timeline info on the Talaria XXX specific pedal kit?
This is the last item I need to satisfy Oregon DMV eBike laws. I’m riding around dirty right now and my head is always on a swivel looking around.
I am taking that chance for the time being which I totally understand.
Yep me too in Ventura Ca, Sherriff's look but I go slow when
I have high risk exposure
@GAME-808 Our Talaria XXX bike is on the way, so next month we should have news!
@@kaniwaba I understand R&D takes time and alot of Talaria XXX owners will be ready to purchase. I congratulate you guys for leading the way and providing products for the community.
We consumers will stick by your side for future products to come 👍🏼.
@@kaniwaba this is all im waiting for before i can go ahead and get my xxx :)
Does the pedal kit add any charge to motor seem like you could get more juice back doing that as opposed to re-gen only?
It may be my fault but no matter how much i tention it it rubs the frame.😢
If is rubbing against the side, you need to shift the sprockets a little to the side, if it is rubbing below, then put the bike on a stool, loosen all 4 side bracket screws, push down on the spindle to tension the chain and while holding the spindle down, tighten screws.
This should have a dedicated chain tensioner system is only flaw I see
Chain can be tensioned, please see minute 29:48
After installing it as mention on the video, code 700 apeared. Throttle not working. Do you know the solution? When plugging normaly without kaniwaba, throttle work normaly. Seems like the kaniwaba controller does not work. Talaria MX4. All my connection are well made and as described on the video.
Hello! Would I be able to ride my bike without pedaling when I want?
Yes you can!
Can you just use the electronic pedal kit without the power/bicycle chain
That wpukd be our Electronic Pedal kit! It has electronic pedal assist and no mechanical propelling.
@@kaniwabathen how does it know when your pedaling when there is no connection between ?
Are you able to use this pedal system with out the wiring
Yes! That would be the Power Pedal Kit (gear and chain propelling mechanism) or Pedal Kit
What’s the link? For it ?
Hi! www.kaniwaba.com/product-page/talaria-sting-r-mx4-electronic-power-pedal-kit-v3-0
Question: Can you use this pedal power kit with the Surron ultra? Maybe is stupid but I have a big reason why 😁
My kit has wore through the frame on my R expert series within a month of fitting 🤬🤬
how about on the Talaria Triple x
Soon!
Will it fit mx3?
The kit for the MX3 will! www.kaniwaba.com/product-page/electronic-power-pedal-kit-v3-0-for-talaria-sting