วีดีโอ

I'm just going to put the pedals on but not the sprocket in-between. Because Wisconsin state law's are retarded...

will you make a bicycle seat for this bike?

Wow, right on time as promised thank you 👍🙏

Wow as promised right on time , thank you 👍

FINALLY 🙌🙌🙌

could we just use a cadence sensor on free spinning cranks to move our bike?

After installing it as mention on the video, code 700 apeared. Throttle not working. Do you know the solution? When plugging normaly without kaniwaba, throttle work normaly. Seems like the kaniwaba controller does not work. Talaria MX4. All my connection are well made and as described on the video.

How do you reinstall the pegs without altering the whole setup? “YOU MAY EASILY CHANGE BETWEEN PEDALS OR PEGS WITHOUT UNISTALLING THE KIT”

How do you reinstall the pegs without altering the whole setup? “YOU MAY EASILY CHANGE BETWEEN PEDALS OR PEGS WITHOUT UNISTALLING THE KIT”

Geometry left the chat

Does anyone know how to make it go faster after my bike only goes 20 mph now

?

Does it come with the kit on it

Does the pedal kit add any charge to motor seem like you could get more juice back doing that as opposed to re-gen only?

Some sort of gearbox pedal drive would be perfect

can you use the pedal kits on the talariaxxx both offroad and road legal versions?

🤣

Can’t find the spare cable I found the acceleration one but not the spare , do I need the spare one ?

Installed on friend's Sur Ron last night. The new kit is excellent, well-thought-out and well-made. The video is excellent, albeit slight difference with the new kit. But common sense saves the day. On a scale of 1-10 difficulty, while this takes a few hours, it is truly only a 6. Few notes: * If you can view the video and just "do the math" to convert .. flip the bike upside down! I think it's way easier. (The Sur-Rons are electric, no issue flipping them over -- no gas/oil leaks!) * When putting the first "jack shaft" sprocket on for the new version, DO NOT TORQUE IT DOWN as shown in the video! Positioning the pedal sprocket into the detents must take precedence for positioning of the jack shaft sprocket. * You do not need "power tools." This was kind of funny. * We were given two chains, we used the shorter one and it fit perfectly. Install it to line the sprockets up, tighten a bit, then remove the chain so you can more easily tighten the allen screws and set screws since the chain will be out of your way. I assume the second chain is a back up, with an extra link in case the shorter one is too tight. Make sure when you finish installing late at night that your headlight and taillight are working -- you are going to want to buzz legally down the street! One quick mod request if it were possible with the controller -- would it be possible to put a cruise control on? Say 5, 10, 15, 20, 25, 30 MPH? If Kaniwaba wants me to test on my bike, I'd be happy to since I want to install this on mine! By the way, we ride our Surrons mostly single track in the woods ... putting the pedal kit on opens a whole new dimension and tremendous value add to our awesome bikes!

Will it fit mx3?

Any plans to make a kit like this for the 79Bikes Falcon M?

Does the regen slow you down when pedaling or do you have to brake

Does the battery charge when pedaling

so they are non funtional just for looks and you know what else. genius move Talaria

I just cut mine out ha 😂

I cannot remove the pedals from the kit. I want to switch to pegs but it will not come off even though i unscrewed everything.

What in the California mod is this

Where do I order it

The only designed flaw on this pedal kit is you wont be able to take out your battery unless you take out the whole pedal bracket which hits the swing arm to slide the battery out

Can this actually pedal the bike because I see no extra gear or chain

this pedal can not keep up w high speed

Are you guys planning to build a kit for the MX-4 and Eride Pro SS?

Will you make a bicycle seat kit for this?

Where can I buy this at

Can you actually pedal the bike with this kit or is it just cosmetic?

what screws were used?

i dont know what i did wrong but i got to the stage where i went to check the red light for the regulator and the regulator began smoking so i shut the bike off. the only difference is i have an aftermarket switch for the headlight so i couldnt use the plugs that were part of the kaniwaba controller harness to give the controller power but im pretty certain i have it wired exactly as it should be. well aside from the smoking regulator. could that be a fault with the regulator from factory/shipping or what?

Donde puedo comprar su kit para Perú?

Dumb question but will it work with bac4000 72v set up?

Won’t adding another chain create more friction and points of failure?

MY KIT HAS WORE AWAY MY FRAME ON MY TALARIA R EXPERT ! IVE SPENT HOURS TRYING DIFFERENT TIGHTNESSES… ALWAYS COMES BACK TO EATING MY FRAME … DO NOT BUY !!!!!!!

Love you too guys. I lost my licence because of drifting and till I take it back , I can be legal on the streets with this pedals❤

just perfect I'm very happy

Weight limit?

It may be my fault but no matter how much i tention it it rubs the frame.😢

This is perfect cant wait to get the kit.

question, is it programmable what speed i go at what level ? me for example i couldnt go over 25 in germany, while i might ok with 32 if i get myself a moped plate, and then i wish to complete release all limits of course on track . can i set those levels? or 25 and 45 for example, pluss limitless ? cheers, thanks for the work you do put into that kit :) loving it---------- an and one more question if i get the 8000er controller for my R mx4 , and the kit, what will that do to the settings ?

excellent the three modes good job very good👌👏👏👏

i need this having my mx4 comming in within 6 weeks and cops here complain about pedals and only that, not many germans drive talaria but even far less know about this kit, ill make it a bit more known and recomend ya

In Russia, pedals on a moped make absolutely no sense. If the engine power is from 250 watts to 3999 watts, then it is a moped, regardless of the presence of pedals. To manage this, you must have rights of any category. Pedals are only needed for bicycles that can be powered by an electric motor with a power of up to 250 watts. If the motor power is greater, then it is no longer a bicycle.