Awesome video man! Always appreciate the support! For anyone looking to install this, installing rhe OCC to the brace before you mount it OK the car will make this a lot easier!
But i dont understand if I don’t want catch can , on stock turbo stock intake then how is this works? Eventually i will delete Intake resonator I have B58 g30 540
17:10 “if it ain’t broke don’t fix it” 🤣 yo!! Very good job on this video brotha! Came out with some good facts and explanations on how everything works. Preventative maintenance first! Oh and next time plz put a rag over the engine oil fill point 😅😅 you was giving me anxiety 🫠 lol
Looks great dude! Can't wait to see it out on the track with us soon. Definitely taking the right steps for a fun and enjoyable track day. Have fun on that long road trip too.
Any issue with the cap on the free tube, cause i did the same and just ran few kilomètres alternance that i saw that the cap on it disapear, any pressiur in?
@@skrrtproductions im not sure the problem just randomly went away after a couple months, some people were saying it could be the breather valve on top of the engine or the leak detection pump under the rear passenger door. No my car just chokes after filling up takes two cranks. So i replaced both those parts hoping that it fixes it.
🤣🤣🤣 a few things I did the hard way forsure. Learned though! It was tough without any videos or super detailed photo instructions. Thanks man I appreciate it 🙏🏼
@@skrrtproductions you didn't, but I was hoping when I landed on your channel and saw F30. Bummed to see another BMW channel that doesn't track. Go to a local track day. I promise after the last thing you'll care about it some BS carbon fiber piece or going to parking and showing off your car. You'll care about learning how to drive your car and building a balanced BMW that you can confidently sent it on any track and represent BMW
@@Speediesam 🤣🤣 100% brotha. That’s the plan, the trip I mentioned in this video will actually be going to the Tail of the Dragon. Those definitely aren’t learning roads but it will be fun. After that I’m planning on attending the next track event there is here in FL 🫡. I fully agree with you!
@@skrrtproductions nice how often do u check the catch can and empty it? Or is that rarely filling up? Curious because I’m lookin at the same setup as you.
Haven’t even checked it but I will this coming oil just to see. Really shouldn’t have to drain it often as oil should barely accumulate unless somethings wrong
BRO! Put the set screws in before you install the cap Also why not put the brakcet on the catch can 1st the install it I got it now. You said it at the end. Your learning as you go. Keep learning have fun.
Yeah didn’t have the best instructions and never had installed a catch can before haha. Also trying to film everything at the same time makes it more difficult 😆. Thanks for tuning in!!
Awesome video man! Always appreciate the support!
For anyone looking to install this, installing rhe OCC to the brace before you mount it OK the car will make this a lot easier!
Thanks fam 🙏🏼. That's a great tip and would of saved a lil bit of headache 😂
But i dont understand if I don’t want catch can , on stock turbo stock intake then how is this works? Eventually i will delete Intake resonator I have B58 g30 540
@@skrrtproductions can I run a strut brace with the catch can bracket, how would I make that possible?
I always wanted to know what that actually did. Great video explaining it
Thanks man! 🙏🏼
17:10 “if it ain’t broke don’t fix it” 🤣 yo!! Very good job on this video brotha! Came out with some good facts and explanations on how everything works. Preventative maintenance first! Oh and next time plz put a rag over the engine oil fill point 😅😅 you was giving me anxiety 🫠 lol
🤣🤣 yeah rewatching that gave me anxiety too. I was extra careful 😬 or I woulda been dead! 😂. Thanks brotha 🙏🏼
Looks great dude! Can't wait to see it out on the track with us soon. Definitely taking the right steps for a fun and enjoyable track day. Have fun on that long road trip too.
Thanks man! Yeah I can’t wait! Looking forward to it 🤙🏼
Nice detailed explanation and install bro! Gotta support them small local businesses 💯%%
Appreciate it bro! You already know! Ross Racing out here providing a super high quality product!
Great video on a much need preventive maintenance item!
Thanks Keav! Definitely feel better about pushing the car now
Great video through and through. Looks like a great product too. I’ll probably be ordering one soon.
Thank you! Yeah, all high quality parts. I recommend it!
Where does that one hose that went to the right side of the engine and down go?
Just into empty space to “vent to atmosphere”. Reason why it’s on that side is to be further away from the cabin air intake
@@skrrtproductions thanks for the clarification
Venting to atmosphere does that throw a check engine light?
Where is that hose going a cross the engine going to? The one that go down to the driver side foot.
Empty space near the engine oil filter. It's just venting the fumes into the atmosphere
Did you get a brass fitting with your kit? My instructions don't tell me where to install. I'm wondering if it fits to bottom of catch can.
The drain plug? Yes, put that on the catch can prior to mounting it. I didn’t do that and it was more difficult lol
Any issue with the cap on the free tube, cause i did the same and just ran few kilomètres alternance that i saw that the cap on it disapear, any pressiur in?
Speaking about 13.43
No mines stayed on just fine, shouldn’t be any pressure buildup because of the outlet hose I placed on the right side of the engine
I had the same issues when buying my 340i with 13k miles my rpm was going up and down after filling up and sometimes driving.
No way! 😂. B58 things. It was the same issue with the PCV right?
@@skrrtproductions im not sure the problem just randomly went away after a couple months, some people were saying it could be the breather valve on top of the engine or the leak detection pump under the rear passenger door. No my car just chokes after filling up takes two cranks. So i replaced both those parts hoping that it fixes it.
Gotcha. Yeah when I had my PCV replaced at the dealer that fixed it
If I installed the OCC does that mean I wouldn't be able to install strut braces?
Correct unfortunately
Enjoy your car👍
Oh yeah! Thanks man!
But bro if i choose without the catch can then how to
Install that,
Follow similar steps. Ross Racing also includes an instruction manual
Bonjour je ne trouve pas le modele en france ? Merci
Not sure if he ships to France :/
You did everything the hard way
Nice video anyways
🤣🤣🤣 a few things I did the hard way forsure. Learned though! It was tough without any videos or super detailed photo instructions. Thanks man I appreciate it 🙏🏼
god damnit. if my PCV blows i gotta take off the whole valve cover to replace it. i want a gen1 b58 now!
😂😂 yeah that would suck
I bet the fuel pump is pretty noisy without the engine cover.
It’s not that much louder, I still have the foam on top of it. But yeah the fuel pump plus injectors are loud haha. It’s not crazy though
I just scrolled down 2 years of your videos and don’t see one that your at the track?
Hey I don’t think I mentioned I tracked my car did I? 😅 I haven’t yet but I plan to!
@@skrrtproductions you didn't, but I was hoping when I landed on your channel and saw F30. Bummed to see another BMW channel that doesn't track. Go to a local track day. I promise after the last thing you'll care about it some BS carbon fiber piece or going to parking and showing off your car. You'll care about learning how to drive your car and building a balanced BMW that you can confidently sent it on any track and represent BMW
@@Speediesam 🤣🤣 100% brotha. That’s the plan, the trip I mentioned in this video will actually be going to the Tail of the Dragon. Those definitely aren’t learning roads but it will be fun. After that I’m planning on attending the next track event there is here in FL 🫡. I fully agree with you!
Review video ?
Review is, it works! Haven’t had any issues since setup
@@skrrtproductions nice how often do u check the catch can and empty it? Or is that rarely filling up?
Curious because I’m lookin at the same setup as you.
Haven’t even checked it but I will this coming oil just to see. Really shouldn’t have to drain it often as oil should barely accumulate unless somethings wrong
Heh
🤣🤣🤣
BRO! Put the set screws in before you install the cap
Also why not put the brakcet on the catch can 1st the install it
I got it now. You said it at the end. Your learning as you go. Keep learning have fun.
Yeah didn’t have the best instructions and never had installed a catch can before haha. Also trying to film everything at the same time makes it more difficult 😆. Thanks for tuning in!!