Man builds a masterpiece. Probably costs a fortune. Took years of research and development. Priceless knowledge. Decides to share it with the world. The comment section: Bruh we came for the sound
I was a rotary mechanic for Mazda years ago when the 3rd gen came out.. there has always been a place on my heart for them for the exception of the rats nest in the two rotor under the intake.. LOL that 4 rotor is absolutely gorgeous love the finish what a amazing powertrain this will be ..WELL DONE WELL DONE!!!
super lite, super small, super powerful and thats why it is used for light plane engines. and if we ever have flying cars they would most likely use 4 rotary engines. 1 on each corner.
When I was 18 and at home in Spokane Washington a new dealer opened up shop and offered the first Mazda R100. I drove my Corvair in and was amazed at these cool little cars with such a tiny odd engine. The salesman sat with me and when I started it he said to floor it while we talked. My better instinct knew better, but it was his car. 7 years later I bought a new RX4 station-wagon that was one of the nicest, quietest cars I've ever owned. It was silent at an idle and you could balance a coin on the engine to the amazement of my friends. I was determined to make that car last a long time buy NOT ABUSING that engine. But even after warning him to not over-rev it, a friend and I took it for a drive and he pegged the tach on every shift, much to my anger met with his scoffing. Sure enough within 6000 miles it started to smoke and at 8 I took it in only to be told that the engine needed to be replaced under warranty. That's when Mazda let me down by saying the new engine was only warranted for 12 when the original was for I think 50K. I sold it at a loss soon after. I still firmly believe in the rotary Wankel concept and will not consider it "dead"as it is the simplest proven means of internal combustion.
Yup! It brings back memories! I used to build those rotary motors on the 80's start from 10a all the way to 13b pp! Love those rotaries except for gas fumes til now I still have rotary cough ! Lol
the guy i bought my FD from (friend of the owner? even when the business was young) told me this was the guy to talk to if you want anything rotary. he does amazing work.
Son, I go way back. Muscle cars, then sport compacts. My wife Jill was one of AMS first customers. I designed for a while. You work like a friend I knew at school- like a surgeon. I respect your perfectionism and results. Now let's hear it run!
The upper and lower plenum work is a work of art and the fuel rails just tuck in place, I modified my lower plenum on my 20B, not just install block off plates, Is a much cleaner look.
Best engine swap ever. If you know what you're doing the rotary is simple to maintain and repair. Screw an Ls and having to repair slung rods and stuck lifters/valves every 80k miles plus being so damn heavy.
Alucinante este motor de Mazda, ausencia de pistones y máxima eficacia, cuando se trata de motores rotativos creo que son los mejores. Enhorabuena por el vídeo.
Really wish Mazda could build crate engines that are essentially ready to go for off to road use. Nothing wrong with shops builds like this... usually... but production through Mazda could help funds for next gen vehicles.
This is engine can run without the bolts, it’s not recommended but it is possible which makes me think how thoughtful the engineering was when the 13b was designed.
Daaam...having the knowledge and ability of building a rotory engine of 2,4,5,6 rotors is an art and gotta be gifted of souuu much skillz...i wud of rebuilted my engine and i have to depend on a mechanic to do this rebuild on my favorite car.🫤🫤
You live in navarre? Thats a sweet ride from cleveland where im from, i just got me a 16 focus st and wanna throw it in some twisties but dont know any decent places, i work installing windows in cars so i go almost everyday to youngstown, warren, alliance, ravenna, akron, canton, minerva, newbury, rootstown... damn near everywhere really
they are not modular, the most common engine is the two rotor, while the eunos cosmo came witha 3 rotor option, three rotor engine have one big fat iron and is built away from the fat iron. the only 4 rotor engine mae came in the racer car for lemans 787 and 767b . this one is a custom engine so IDK everyone who has built a custom 4 rotor tends to do it different ways
Honeltly cant wain for another 10-20yrs of developement (like with muscle car era now) when you can order a bran new crate rotary with all the kinks and mods built in, billit and all at a reasonable cost. same goes for bodies and NOS (new/old,stock) parts. you can build a 69 camaro brand new today, every part is re-manufactured. cant wait till rx7, skyline, supra!
Man builds a masterpiece. Probably costs a fortune. Took years of research and development. Priceless knowledge. Decides to share it with the world.
The comment section: Bruh we came for the sound
as a video game developer. i know that feeling.
there are no words to express the greatness and genius of this engine. The man who surpasses himself.
I was a rotary mechanic for Mazda years ago when the 3rd gen came out.. there has always been a place on my heart for them for the exception of the rats nest in the two rotor under the intake.. LOL that 4 rotor is absolutely gorgeous love the finish what a amazing powertrain this will be ..WELL DONE WELL DONE!!!
Check out the Rx4 wit 6rotors 🔥🔥🔥
Rotor is such a cool design and by far one of the best sounding engines ever built
super lite, super small, super powerful and thats why it is used for light plane engines.
and if we ever have flying cars they would most likely use 4 rotary engines. 1 on each corner.
Whenever someone post a rotory make the engine run. I came for sound
Thank you. The main reason I’m here.
Same
I love brap brap
Hahh
Rotary!!!
Whatever madman said that two rotors WASN"T enough? I absolutely applaud you.
just wait till you hear about the six rotor cosmo
@@scooter9330 Oh I have! Saw it on Noriyaro’s channel on 7’s day lol
@@kaden5294 dang I almost beat you to it
When I was 18 and at home in Spokane Washington a new dealer opened up shop and offered the first Mazda R100. I drove my Corvair in and was amazed at these cool little cars with such a tiny odd engine. The salesman sat with me and when I started it he said to floor it while we talked. My better instinct knew better, but it was his car. 7 years later I bought a new RX4 station-wagon that was one of the nicest, quietest cars I've ever owned. It was silent at an idle and you could balance a coin on the engine to the amazement of my friends. I was determined to make that car last a long time buy NOT ABUSING that engine. But even after warning him to not over-rev it, a friend and I took it for a drive and he pegged the tach on every shift, much to my anger met with his scoffing. Sure enough within 6000 miles it started to smoke and at 8 I took it in only to be told that the engine needed to be replaced under warranty. That's when Mazda let me down by saying the new engine was only warranted for 12 when the original was for I think 50K. I sold it at a loss soon after. I still firmly believe in the rotary Wankel concept and will not consider it "dead"as it is the simplest proven means of internal combustion.
its so impressive that an engine can move at such extreme speeds and still function or not break just wow
What speed, Nothing in this vdeo have any speed you idiot.
I'm from California.I grew up in the 80s with that music,and 13b rx7 Bridgeport,and RD mortcycles all day.Great build.👌
Thank you very much! Hard to beat the 80s and Rotarys.
@@GTORx7 😎👍
@@GTORx7 I caught that tune right away within a few seconds. Bronski beat.
Yup! It brings back memories! I used to build those rotary motors on the 80's start from 10a all the way to 13b pp! Love those rotaries except for gas fumes til now I still have rotary cough ! Lol
the guy i bought my FD from (friend of the owner? even when the business was young) told me this was the guy to talk to if you want anything rotary. he does amazing work.
Son, I go way back. Muscle cars, then sport compacts. My wife Jill was one of AMS first customers. I designed for a while. You work like a friend I knew at school- like a surgeon. I respect your perfectionism and results. Now let's hear it run!
The upper and lower plenum work is a work of art and the fuel rails just tuck in place, I modified my lower plenum on my 20B, not just install block off plates, Is a much cleaner look.
A goal of mine is to have a 3 or 4 rotor built by you all for my rx7 one day. Love the work.
One man's trash is another man's treasure in a Winkle motor is a gold mine 😁🤟
To hear Bronski Beat while watching this engine build-up - can't get more satisfied right now :]
Wow what an amazing build. Beautiful the way it goes together. Top workmanship too.
Please put up a video of this car when it drives.
Look for impossiblerx7 on ig
@@bobby1609 Thanks!
i just looked on the ig and this guy is going to be building a 6 rotor...
Josh VerSchneider it was blown up with many oil leaking. Welcome to rotary world
@@nelc2399 Where did you get the information from any links, that engine hasn't even run yet, no one knows what's happened to the engine
MOst disappointing thing: didn’t get to hear it run
Sorry, that's why the title is engine build, not engine fire up.
It’s not ready
stolen malibo 11171771771771771771777131313131313131315166151444444440009118171777777777777666666638419
No fkng shit ..same here😕
Lots of 4 rotor videos th-cam.com/video/xUXA1SIqJFY/w-d-xo.html
Best engine swap ever. If you know what you're doing the rotary is simple to maintain and repair. Screw an Ls and having to repair slung rods and stuck lifters/valves every 80k miles plus being so damn heavy.
Instrumental version of Bronki Beats' "Tell Me Why" is a nice accompaniment.
Hi from NZ,
Anthony
Its Small Town Boy. Found myself whistling it along with the synth at the start & was amazed when the beat kicked in & it was the actual song...haha
I love the concept of rotary engines, the apex seals…
Now this is what I called a engine build video 😍
Alucinante este motor de Mazda, ausencia de pistones y máxima eficacia, cuando se trata de motores rotativos creo que son los mejores.
Enhorabuena por el vídeo.
Incredible! Thanks. Wish we could have heard it run.
So pleasing to watch, even with 2 turbos the engine assembly looks so tiny
That's one hell of a clean motor right there. Great job, looks awesome, can't wait to see a video of it firing up.
Love the break down of how it went together
Really wish Mazda could build crate engines that are essentially ready to go for off to road use. Nothing wrong with shops builds like this... usually... but production through Mazda could help funds for next gen vehicles.
Ok Rob dahm where are you hiding, you too mazzei formula 👀
True lol
And Mad Mike
At least we get to hear his run
RayJedi gzizfdzzdzzz
RayJedi Yes I don’t get it I mean I don’t know what one is trying to accomplish over the other…They’re clearly not the first to do what they’re doing
248 people wanted to hear it run
767 thousand
249
Everyone!
@@sledgiefd9070 yup
Solo la canzone con la quale il video inizia è spaziale....il resto poi, non ha bisogno di nessun commento, solo una parola: STUPENDO !!!!
Need to hear the braps boys!!!
Looks sick with carbon intake and twin blowers on it
The billet housings look amazing
Brilliant, you know your stuff and you show you care for a Rotary engine
I never thought I could reach those levels of excitment!
if this isn't a piece of art, i don't know what is.
What if Mazda makes newer versions with the same looks as older Rx7’s? That would be wild
love the small town boy cover :D
engine looks sick!
Thanks!!
Amazing hypnotic video. Please keep posting this type of content.
So Amazing to see this Build!!!! Wow!!
Thank you! I'll be posting more video's soon with other 4-rotor content
That is pretty. Can't wait to see the start up.
I used to have two 3 rotor cars. Nice video.
I think this engine is very useful in helicopter and & speed boats love from India 🇮🇳
This is going to be an animal of an engine.
Wow. Cool. I've never seen one of those being built.
That is nuts that is one big tubro
Rob dahm wants to know your location
Yeah i guess, so he can keep clear from this monster in the making.
@@MyMIXmedia Considering Rob's 4 rotor build is going to be above 1800bhp (probably around 2000bhp), I don't think he's particularly worried.
Loving the Bronski Beat remix
surprised anyone on here's heard of them.
Do you have videos of the finished car? I would love to see how it behaves when driven.
Thanks Logan for the amazing video!
MrChayl3 30☺😅😅😄😂
This is engine can run without the bolts, it’s not recommended but it is possible which makes me think how thoughtful the engineering was when the 13b was designed.
They do require the bolts to run. Without them the "sandwich" would not be held together and fall apart.
I think this car will fly...!!!!
I got 1 thing to say I love rotor engine
Rotery engine very fast.. Sound very amezing
Now building a billet rotary assembly would be interesting.
would have loved to hear this beast running.
I want this for Christmas!
looks good Logan.
wow great build hope to hear it run!
even as a flat plane v8 fan.... rotary engines are fun
Could watch this all day.. better still ... be in the workshop !!
Daaam...having the knowledge and ability of building a rotory engine of 2,4,5,6 rotors is an art and gotta be gifted of souuu much skillz...i wud of rebuilted my engine and i have to depend on a mechanic to do this rebuild on my favorite car.🫤🫤
nice 787b motor!:)
i love RX7 and RX8 is my dreams
Awesome job guys 👍 love this combination ❤
One day I'll own a 4 rotor from you guys.....one day.
Rotary engine expert there!
Great classic song!
Bronski Beat - Smalltown Boy
Because rotary. Brap brap brap. 🤤. I was on you website build me a 4 rotor.
I can build you a 4- rotor anytime you want!
You put the Wank in "Wankel" alright. Absolutely beautiful
I live in Navarre, OH. Have to make a trip to ur shop. Be a great cruise for my '04 STi
You own an sti? we couldn't tell by your name.... bahaha
Just changed it to that. After i realized my real name was showing. lol
Oh... yeah fuck that hahaha @@RallyRu_2004_STi
Typical douchebag letting everyone know u have an STI lmao wow so cool
You live in navarre? Thats a sweet ride from cleveland where im from, i just got me a 16 focus st and wanna throw it in some twisties but dont know any decent places, i work installing windows in cars so i go almost everyday to youngstown, warren, alliance, ravenna, akron, canton, minerva, newbury, rootstown... damn near everywhere really
nice and a pratick engine is VANKEL!
wow great build and good video to!
WOW, spectacular.
How much does it weigh all up? What turbos are used? How many inches of manifold pressure max? Any longevity issues or is it going in a drag racer?
Absolutely Beautiful !!
Nice work boys, let's hear it run
Love it, can't wait to see her run Alex♥️
I'm new to rotary. From the design it looks modular. Can it actually add or remove rotor based on owner liking? Or is that is a custom engine?
Its custom mazda usually only offered 2 rotors in their cars although i think they had a 3 rotor racecar.
they are not modular, the most common engine is the two rotor, while the eunos cosmo came witha 3 rotor option, three rotor engine have one big fat iron and is built away from the fat iron. the only 4 rotor engine mae came in the racer car for lemans 787 and 767b . this one is a custom engine so IDK everyone who has built a custom 4 rotor tends to do it different ways
You destroyed last cylinder block, too Long bolt tried screw air gun 💪you are one of the better mechanics 🤣
Mechanic Art....
Can I ask why the center iron section are so thick? Wouldn't a flat plate do? Way lighter. Those irons are HEAVY
They need enough thickness to house a stationary gear/ bearing assembly. Each one is actually 10mm thinner than a factory race mazda 4-rotor.
excelent travail , j'aimerais voir la pêche de cette engin!!!
Had to get my daily fix wow just great
Ooo com on man want to hear the sound of the engine .
a beautiful looking engine
AHHH, I didn't get to hear it run. What a bummer, very cool engine though.
Essa tecnologia era da VW através da NSU eu andei neste carro nos anos de 77 agora Mazda!!!!
You are a genius
That is beautiful it is a conspiracy that rotary engines r the top dawg
Nice video. Thanks! !
это лучший двс что создало человечество
Love the music. Im an 80s kid
this is a dream motor...
Super job, & music!!!
where you made/found this crankshaft ????
you're boss for build this engine 💪
Good luck to you and your rotary engine.
Honeltly cant wain for another 10-20yrs of developement (like with muscle car era now) when you can order a bran new crate rotary with all the kinks and mods built in, billit and all at a reasonable cost. same goes for bodies and NOS (new/old,stock) parts. you can build a 69 camaro brand new today, every part is re-manufactured. cant wait till rx7, skyline, supra!
They seem like such simple engines. It’s crazy. I wish they were just cheaper.
great tune
Is that wheel or crank power? Let’s see those dyno numbers!