What are those metal wires you were installing on the top of the cylinders at the start? Whats the use for it , so interesting have never seen it before
Devin is one of the most meticulous engine builders I've seen, yet he also has to rebuild more engine due to failure than anyone I've seen. Very strange.
#DevinNimela the rocker arm Gauge you used on the rockers you should of had bent the tip a bit so you can get a real size cause the way you used it it might have left your rockers a milimeter more open
You are a pro with that caulking gun. My 2$. If you use your gloved finger to spread it thin on both parts. You'll have less push out and a better seal. Cheers!
Its all about the views with the ASMR. TH-cam must have a favorable algorithm to it because they're getting hundreds of thousands of views on those videos. I get it from a business stand point but do it on a tear down that doesn't matter. Not the assembly that everyone is watching and wants to learn. Come on Devin your doing us dirty in favor of the view's.
@@Karpofcarp Aluminum has a fatigue life, it's not like steel, if you don't deform steel it'll never fatigue. With aluminum rods it's not a matter of if, but when. Titanium retainers are lighter than steel ones, so allow you higher revs because of the lighter valve train, but it's not as tough as steel. The rockers will eventually start wearing on the retainers. You want a high revving Honda engine, get S2000 valvetrain stuff. The oil pump and the valve train is good for 9,200rpm reliably. I don't think you need to rev more than that.
@@Karpofcarp It is! It's great for reducing weight, but it's really expensive because you have to replace the rods constantly. You don't have to do that with steel rods.
I’m hoping Devin decides to do an LS build someday. Super easy motor to work on and the smiles per hour are great if you supercharge or turbo them.
I feel devin would look good in a grand national
Yup American domestic engines and European engines too
Should get a g body and ls swap it. Doesn't have to be GN
I like to see build B58 supra or Bmw😅
Honda's are easiest to work on dam easy a 12 year old can build it
You’re a stud brother! I know cameras make it look like you’re having a fun time all the time, but you’re a naturally gifted mechanic! Good stuff bro
Am from africa and i study mechanics n believe me when i say our lecturers use devins video to explain some of the things we do🙌🏿
That's cool 100%
That’s so sick
Cap
u hating
How? @@issi615
chiropractic back cracking and torque wrench cracking is just as satisfying
great job man, that valve adjustment i would get your self a bend feeler gauge.
These builds are the best!
Damn that was relaxing to watch. And got me super motivated to go work on my car. The clean, silent atmosphere is perfection 👌🏻
this makes me wanna work on something. God I love these videos. Devin you have my dream job. Never forget to count your blessings.
Dude beautiful video with out a single word, lovely video.
Oh I love it when Devin does an engine build.
That three bond gasket maker Devin is using has to be the best gasket maker you can get these days!
what a baller video brother the ending scene had me ROCK solid bro
Why did you pound the fire rings flat ? Aren't they supposed to stick out and become compressed by that head to make a better seal?
7:30 why only put RTV in those two spots and not the whole thing? Genuinely curious. Never had a Moroso pan.
wondering the same here
Wow honda memang laju laa di dunia nie😂😂mantap laa 👍
A true and proven demonstration in the path of nothing, but, PERFECTION.
Just sitting down for lunch. Let’s go!
Make sure the fire rings seam is lined up with a head stud
Nicee jobe man❤
Love you from iran🇮🇷
What are those metal wires you were installing on the top of the cylinders at the start? Whats the use for it , so interesting have never seen it before
That's called "fire ringing" . Once the head gasket is sandwiched between the block and head, they bite into the gasket, providing a better seal.
Why you do not use the glue at oil gasket ?
My boy is being quiet again. Nice vid man.
10 and 12 mm with screwdriver valve lash 6:39
Interesting, no gasket for the pan at all?
Didn't even torque the crank bolt. Shiet. I'm playin. This was beautiful
Don't all you ladies and gentlemen copy me but when I get on here I feel like I've become a family member 4:37
Why did you only seal one side of the valve cover? Learning myself so don’t judge.
I thought you are suppose to put RTV on the oil pan.😅 Never have had a Moroso pan so I am not entirely sure.
The oil pan on these don’t need a gasket or sealer?
why is it so beautiful
What’s the wire u put around the cylinder in the beginning
i thought you said you wearnt pulling oil pick up and stuff. did you pull a bearing cap?
a silent treatment that actually educational.....🤣😂🤣😂🤣😂
Why not have the block and head machined for a proper fire ring heasgasket set?
The thumbnail 👌🏻👌🏻
Devin is one of the most meticulous engine builders I've seen, yet he also has to rebuild more engine due to failure than anyone I've seen. Very strange.
Good work 👍
i put pistons in engine block with new rings and when i turn over i see some scratch on cylinder wall?
#DevinNimela the rocker arm Gauge you used on the rockers you should of had bent the tip a bit so you can get a real size cause the way you used it it might have left your rockers a milimeter more open
Devin that oil pan will leak again, seems like you didn’t put silicone all around. I may be wrong
Lays dimes with that RTV!
Beautiful video
1:13 What are these rings for??
They put more tension on the Headgasked for better sealing. Its a common use for enginges which run on high boost pressure. hope that will help you :)
I promise you with vtec it will make more power 3:43
Bro, you really can👍
What camera and lenses are you using to make the video?
ASMR vibes 🤙🏽😎
I'd love to see the blooper reels to these ASMR videos. There's No way you didn't drop a few F Bombs or other words of encouragement 😂
Does any one know what the part number is for these pistons?, what compression will this have & the most boost it will reach?.
Bro the way u tightend ur cams down could have broken ur cams u should have tighten those bolts evenly down 👊🏾👊🏾
im hoping you put those rings closest to head stud bolts for more clamping torque
The rings go around the piston cylinders
You degree the cams?
Crazy time
what brand sillicone is that ??
When you put the washers on its supposed to be like bearings 2:46
Price ?
Salute 💯
1:28 whats that "wire" called?
Smoooth!
Wat is the wire thing u using in the block
Degree the motor?
I’m waiting until Devin discovers the 5 cylinder
Does anyone know what sealant devin uses
Most likely The Right Stuff by Permatex
К20 или К24?
Very nice 😎😎😎👍👍👍
1000hp? With what?
Was hoping you'd teach us how to properly install the fire rings but we got another ASMR instead. ☹️
🔥🔥
Rick James 😂😂😂____$ 9:01
You are a pro with that caulking gun. My 2$. If you use your gloved finger to spread it thin on both parts. You'll have less push out and a better seal. Cheers!
Honda H series?,B series?,K series?,f series?
It's a K
I really wanna see the 2jz built🥹
Salam dari Malaysia
I hope someday Devin buy a American car like a srt4
Its all about the views with the ASMR. TH-cam must have a favorable algorithm to it because they're getting hundreds of thousands of views on those videos. I get it from a business stand point but do it on a tear down that doesn't matter. Not the assembly that everyone is watching and wants to learn. Come on Devin your doing us dirty in favor of the view's.
Y la prueba?
El video dice armado, no prueba. La prueba está en el video del civic en su canal
@@satariel8652 pero yo lo quiero escuchar!!!🤣
Can't wait to see him blow it up on the dyno.
A pattern is emerging... 😊
Nice....the sound of metal and all.. 😅
UHHHH NO PIL PAN gasket ?
ASMR Zaddy
Your brother Cameron niemela? Same face
Oil will be everywhere if you dnt cover that up 6:06
Titanium retainers and aluminum rods don't last.
Whys that?
@@Karpofcarp Aluminum has a fatigue life, it's not like steel, if you don't deform steel it'll never fatigue. With aluminum rods it's not a matter of if, but when.
Titanium retainers are lighter than steel ones, so allow you higher revs because of the lighter valve train, but it's not as tough as steel. The rockers will eventually start wearing on the retainers.
You want a high revving Honda engine, get S2000 valvetrain stuff. The oil pump and the valve train is good for 9,200rpm reliably. I don't think you need to rev more than that.
@@rolandotillit2867 ok fair point, I just thought aluminum would be good for weight reduction
@@Karpofcarp It is! It's great for reducing weight, but it's really expensive because you have to replace the rods constantly. You don't have to do that with steel rods.
@@rolandotillit2867 so since I'm going to do the same build stay away from aluminum rods and go with regular steel then?
I dnt like that 1:08
why??? lmfao
WTF HAPPENED TO YOUR RIGHT KNEE BRO? Don’t even care about that Honda!
I was the first view!
Again……..toooo much rtv
asmrs 👎🏻
builds most important part and chooses it to be an asmr video lmao fail
I know wtf. We're here learn visually and audibly so annoyed