Support me on Patreon and get early videos: / diodegonewild Today, let's test a giant laser donated by a viewer. It looks very powerful and dangerous. Let's also see what's inside and how does it work.
He had me for a moment before I realized a super powerful laser wouldn't have controls mounted directly on it like that for safety. That and I think even this guy isn't nutty enough to light such a thing in the same room, at least not without making a point of donning questionable chinese or surplus Soviet protection.
I think it is a security lasersource, from a laser "gate", used in bank or museum, back 80"s. It"s not too powerfull, but working at long distances, and gives a special modulated laser, for security reasons. It has that key and metal housing, for same reason, not because it"s power or danger, or something.
class 3b lasers are required by law to have a key or electronic interlock system in place here in germany, I know this seems kind of stupid for a 500mW laser but they are used in schools with children in physics class and stuff so well.. makes sense somehow
@@audiocrush Doesn't need to be a unique key. Only a kind of "child lock" system. Some just have a 2.5mm audio jack, with a 2.5mm audio plug on a keyring, inserting this audio plug into the laser will short the contacts so laser is enabled. That audio jack can also be wired to a door interlock system, by just wiring the 2 wires in the audio jack to a door magnet. The lasers from Wicked Lasers have a electronic interlock with a code, but all lasers have the same PIN code (3 short and 2 long), and the PIN code is unchangeable and in the manual. Just a "check that you have read the manual" kind of safety. Its just a thing to ensure "you know what you are doing" so somebody that finds the laser in a closet and play around with it, thinking its a flashlight or similiar, don't get "burnt".
SERIOUSLY DANYK! After you putting a 400 V water heater into salty water or using the most dangerous tools of china, I believe in absolutely everything you do, so if you were making a hole into the whole house, I would have agreed on that anyway.
Reminds me of my service, the Leopard Tank got a Laser key too. I was allowed to fire it after a long lecture. They teached us the beam could bounce off and make people blind where no one would expect so. When playing with such things googles are a must, and these must be proper for the specific laser.
I was so impressed, then disappointed, then delighted by the joke, best entertainment I’ve had in a while! Glad to see than no cats were harmed during this video. Maybe it was set on stun and you didn’t get the full effect.
Never seen any VFX on your channel before, but I thought you did a great job with that CMOS burn effect! That programmable crystal oscillator is super cool!
@@johncoops6897 I commented as soon as I saw that Oscillator. Later I discovered that he mentions about that at the end of the video. So, I edited it at the end of the video. If my comment seems stupid to you, why did waste your time replying to a stupid comment. Don't you have anything else to do? Oh, wait, you're stupid too just like my stupid comment. Now, don't waste your time replying to this. Go find a job, and do something productive.
you had me going for a bit i really thought it had destroyed your camera or tripped your electrics when it all went dark well done mate very interesting video
the PXO-600 is a base 600Khz oscillator chip, with programmable divider. The pins are configured to divide the base 600K down to 50Khz if you didnt already know, lol but you probably did :) very cool. Nowdays we just use an oscillator connected to flip flops or a logic gate and then on to a divider chip separately, but that chip is cool as its all built in, provided they had the frequency you needed in a package. Nice one! :) *strokes cat in a Bond villain kind of way*
Fascinating! That was probably a very expensive module when it was sold new. I laughed a whole lot at the holes in the wall! Thanks for the great entertaining and educational video. Love the old technology like this!
I remember using one of those old metal can transistors on a much-too-big inductive load.... it got so hot that it had a coating of my incinerated skin on it.... but still worked.
2:20 ''Je to hole in the wall'' Tím jsi mě dostal, někdy ta čeština se tam prostě vetře. :D Koukám na to už tak po 8 a pořád mě to baví, ale až tentokrát jsem si toho všiml.
I liked this circuit board a lot!!! Nice, easily repairable one-layer design with chip sockets and trough-hole components. Xtal chip is just beautiful! Thanks for this video :)
I guess that glass window on the chip is for erasing eprom. I ve been told that od microcontrollers are erased thoruh that window on uv or ir light. very old.
I love this guy. Fun videos and a fantastic accent. (It seems I've developed a bad habit of subscribing 3 videos in.) I would really love to know where you're from.
Great 👍 especially your Joke is a high quality one 👍👍👍👍👍😄🤣 I liked it very much. After my former Employer Infineon Technologies AG in Regensburg nearly killed me with pure terrorism, through a PTSD with blood pressure escalations up to 280 mmHg (0,4 bar) and resulting in 2 brain bleedings (because I refused to accept a kind of waiver after rising the yield up to 2,8 percent; my IQ/ percentage is >99,9 within German Students reference) I think I laughed the first time in the last years. Greetings from Germany /Bavaria /Kelheim And thank you very much for your Videos which I like very much
Hahhaaa. You fooled me 100% bloody hell in spite of the truth that I have been doing TV shows where they used gas lasers in the 70’s. This must have really expensive those days. This is the first time I see a Programmamble XTAL oscillator.
Bloody hell, I fell for it.
Now point it at Mr. Hathaway's house and make popcorn. *smiles*
Got us in the first half, not gonna lie.
He had me for a moment before I realized a super powerful laser wouldn't have controls mounted directly on it like that for safety. That and I think even this guy isn't nutty enough to light such a thing in the same room, at least not without making a point of donning questionable chinese or surplus Soviet protection.
Other idiot youtubers would watch only the intro and spread rumour that he has a secret lightsaber,area 51 mumbo-jumbo
Ha, ha, ha !!! A man with a sense of humor! Excellent.
@@Broken_Yugo I also fell for it for a moment, but I realized those “stickers” were out of alignment
@@teslarider5553 the dunning Krueger effect
Hahaha 🤣 For a minute I thought you killed your cat on the other side of the wall 😬😅
@TheReal_Yash you is cronge
I think it is a security lasersource, from a laser "gate", used in bank or museum, back 80"s. It"s not too powerfull, but working at long distances, and gives a special modulated laser, for security reasons. It has that key and metal housing, for same reason, not because it"s power or danger, or something.
class 3b lasers are required by law to have a key or electronic interlock system in place here in germany, I know this seems kind of stupid for a 500mW laser but they are used in schools with children in physics class and stuff so well.. makes sense somehow
@Luiz Gonçalves I said "it seems"
I was just referring to people who might think that people using these things always know what theire doing
@@audiocrush Doesn't need to be a unique key. Only a kind of "child lock" system. Some just have a 2.5mm audio jack, with a 2.5mm audio plug on a keyring, inserting this audio plug into the laser will short the contacts so laser is enabled. That audio jack can also be wired to a door interlock system, by just wiring the 2 wires in the audio jack to a door magnet. The lasers from Wicked Lasers have a electronic interlock with a code, but all lasers have the same PIN code (3 short and 2 long), and the PIN code is unchangeable and in the manual. Just a "check that you have read the manual" kind of safety.
Its just a thing to ensure "you know what you are doing" so somebody that finds the laser in a closet and play around with it, thinking its a flashlight or similiar, don't get "burnt".
Man, you pulled it off well! No special effects needed, old school practical effects suit you well!
You got me really good!
I was shocked
I believed it too... you just can't trust these TH-cam scammers! ;)
I'm laughing my arse off this was so perfect hahahaha.
Why are u talking like that. And don't say you do talk like that because i won't believe that
SERIOUSLY DANYK!
After you putting a 400 V water heater into salty water or using the most dangerous tools of china, I believe in absolutely everything you do, so if you were making a hole into the whole house, I would have agreed on that anyway.
I feel that soon some Styropyro level of laser powers will be held here
0:35 *BEDAAAAAASSSSS*
New meme 😂👌
DODDDD-GEEEE !!
Reminds me of my service, the Leopard Tank got a Laser key too. I was allowed to fire it after a long lecture. They teached us the beam could bounce off and make people blind where no one would expect so. When playing with such things googles are a must, and these must be proper for the specific laser.
I was so impressed, then disappointed, then delighted by the joke, best entertainment I’ve had in a while! Glad to see than no cats were harmed during this video. Maybe it was set on stun and you didn’t get the full effect.
Never seen any VFX on your channel before, but I thought you did a great job with that CMOS burn effect!
That programmable crystal oscillator is super cool!
You had me going! I was picturing a perforated neighbor in the next apartment.
11:50 That's a Programmable Crystal Oscillator.
Oh, you already mentioned it.
So, you made a stupid comment anyway?
@@johncoops6897 I commented as soon as I saw that Oscillator. Later I discovered that he mentions about that at the end of the video. So, I edited it at the end of the video.
If my comment seems stupid to you, why did waste your time replying to a stupid comment. Don't you have anything else to do?
Oh, wait, you're stupid too just like my stupid comment. Now, don't waste your time replying to this. Go find a job, and do something productive.
@@tarun.starboy 😂
Nobody:
Diodegonewildv*BLOODY HELL*
I'm here for the accent
Me too and Im even from the same coutry as him XD. His accent is really bad(or weird). But he is really good with electronic.:)
Come for the accent, stay for the cat and infinite knowledge.
Yeeeees
His accent is funny but he knows his english language well. Im from the funny english capital of the world, Finland.
The accent...
You broke my heart, I thought it really made hole on the wall. Wish I could had something which could burn bricks and make holes just in no time.
"You call that a laser? This is a LASER!" DiodeDundee
I wasn't expecting a joke. Nice one, and from the size and mains power plug i thought it would make a mess
you had me going for a bit i really thought it had destroyed your camera or tripped your electrics when it all went dark well done mate very interesting video
Very nice warning to everyone to not believe everything you see on youtube. You got me, nice special effect!
the PXO-600 is a base 600Khz oscillator chip, with programmable divider. The pins are configured to divide the base 600K down to 50Khz if you didnt already know, lol but you probably did :) very cool. Nowdays we just use an oscillator connected to flip flops or a logic gate and then on to a divider chip separately, but that chip is cool as its all built in, provided they had the frequency you needed in a package. Nice one! :) *strokes cat in a Bond villain kind of way*
Can you plz tell me a simple oscillator circuit without using a ic and only with transistors stuff it would be very helpful thanks.
When you get excited for your April Fool's prank but you can't wait for April 1st to come..
:D
So that's why I saw that insanely bright line on the sky last night
Fascinating! That was probably a very expensive module when it was sold new.
I laughed a whole lot at the holes in the wall! Thanks for the great entertaining and educational video. Love the old technology like this!
same
i have a hole in my window and i suspected you did it for a second !!!
Lazer burns hole in walls, and everything in its way, across town, haha, good one!!!
Mother of god, You finally upload a new vídeo :)
I was already thinking of reporting him to police.
Hahaha, you fooled me :-D
That joke was so BadAsss
got me bloody hell hook line and sinker :-)
Damn! Genius practical effects with just a marker and a tape.
I actually belived it😂
I remember using one of those old metal can transistors on a much-too-big inductive load.... it got so hot that it had a coating of my incinerated skin on it.... but still worked.
I believed it for a second until the wall lol
I still believed it right up to the reveal.. :(
Bro you got me there. I almost jumped out of my seat on the key turn.
You had me in the first half not gonna lie 🤣😃🤣
Programable crystal oscillator? Nice. I've got to have one, even though IDK how to use it.
It worked on me! Niice!
You got me bro
Ha ha, for a moment you had me
You are better pankster than all youtubers
I fell for it! 😅
you got me.. lol😂😂
Great start! Had me fooled for sure!
Yeah for a few seconds there !..that chip looks so cool, can't wait for the next bit...cheers.
You really fool me in the beginning with those fake burned holes :D The chip with window looks like some custom EPROM
Could it be a microcontroller? There were some UV erasable microcontrollers on the market back in the day.
@@soundspark I just found the datasheet of it 12:50, it is PXO-600 programmable crystal oscillator 13:58, now that is something very interesting
@@technixbul I hadn't watched the whole video yet either.
2:20 ''Je to hole in the wall''
Tím jsi mě dostal, někdy ta čeština se tam prostě vetře. :D
Koukám na to už tak po 8 a pořád mě to baví, ale až tentokrát jsem si toho všiml.
DiodeGoneWild went wild with a super size laser diode...lol..to funny
The PXO-600 is a programmable crystal oscillator. It's like an electronically adjustable tuning fork.
You speak like an italian version of Dracula :)))
😂👍
oh shit I love you, DiodeGoneWild! This Joke was hilarious! From 1:50 to 3:08
what was this used for?
Your girlfriend is going to be pissed if she saw this lol
I was quite excited to know something that small could do all that in a second, so disappointed to see the stickers. :(
WARNING:
Risk of electric shock, death, fire, explosion, burns and serious vision damage.
That's nice :).
I think you got most of the people
Bloody hell, are you kidding me!! Was sooo good and well done joke.
LOL loved the deceit ! haha
When I saw that 220V label I already suspected that it's old.
\*happy styropyro sounds\*
I liked this circuit board a lot!!! Nice, easily repairable one-layer design with chip sockets and trough-hole components. Xtal chip is just beautiful! Thanks for this video :)
1:42 BLOOOODY HEEEELLL
6:47 I didnt thought fleshlights had lenses on them ?? xD
This is my favorite video of him just because of the joke
You got me so good that I immediately wanted one myself. 🤣🤣🤣
Great job👍
Damn you got me good
Programmable crystal oscillator. PXO-600. Never seen one before.
I can't stop laughing 😂😂🙏 as you say " blooooody hell". Well this looks like pretty dangerous thing 😂
You tricked me good!!! Thank you for good videos!
Well, you could say thats a "Diode Gone Wild"
Yep, that got me. Fabulous!
I guess that glass window on the chip is for erasing eprom. I ve been told that od microcontrollers are erased thoruh that window on uv or ir light. very old.
Wow, I've never seen that method used before. Very interesting!
Fantastic experiment
Smart arse , very funny.Fell for it.
I love this guy. Fun videos and a fantastic accent. (It seems I've developed a bad habit of subscribing 3 videos in.) I would really love to know where you're from.
at first I thought it was for real. It was well done thumbs up
can you modify it and make it more powerful?
Great 👍 especially your Joke is a high quality one 👍👍👍👍👍😄🤣 I liked it very much. After my former Employer Infineon Technologies AG in Regensburg nearly killed me with pure terrorism, through a PTSD with blood pressure escalations up to 280 mmHg (0,4 bar) and resulting in 2 brain bleedings (because I refused to accept a kind of waiver after rising the yield up to 2,8 percent; my IQ/ percentage is >99,9 within German Students reference) I think I laughed the first time in the last years. Greetings from Germany /Bavaria /Kelheim And thank you very much for your Videos which I like very much
Great video. I laugh a lot! Really fun idea introduce this laser. Thanks 👍😊
Kde to můžu koupit? A spotřebuje to hodně energie?
Had me going there! So what would a low power IR laser like this be used for?
security. infrared beams across safe entrance in bank for example..
@@lordred7462 Oh I had no idea.
LMAO i could not stop Laughing
That circuit board looks beautiful ....
😂 you had me there for a moment…
Ha ha, fooled me, i was like wow what a laser I want one of those
1:41 oh my god what the fuck
Damn it, diode, you got me so bad lmao
Hahhaaa. You fooled me 100% bloody hell in spite of the truth that I have been doing TV shows where they used gas lasers in the 70’s. This must have really expensive those days. This is the first time I see a Programmamble XTAL oscillator.
px0-600 is a programable crystal oscillator
Interesting! I can't wait for the second part
Now i understand how that hole in the window happened a few days ago!
hahaha nice representation!
Oh my god that is very scary and huge lol :) :O
Hi how are you doing?
@@Electronichub_05 not bad
How are you doing :)
Statek PXO-600 - Programmable crystal oscillator.
the strange chip with window is a programmable integrated crystal oscillator
LaserDiodeGoneWild
How did you make that energy meter?
10:17 that made me laugh
You fooled me allright. Nice :). Its good the cat is in the new videos.
you got me full! ;-).
Lol you got me 😋
I got Punk'T by the Punk'T laser