@@hyperluminalreality1 he knows more than a lot of guys do! two stroke Diesel Mechanics are a dying breed, someones got to keep these engines alive and going!
Joe is at the very top of Detroit Diesel techs. You now know how a master mechanic works, and the quality job that a wizard turns out routinely. I'm from the same area of Oregon and I've crossed paths with Joe a few times.
And you are paying it forward already by sharing Joe's knowledge through these videos. This is one of the best example of friends helping friends I've ever seen.
It seems pretty obvious to me. Joe is impressed with what you do, keeping the old dinosaurs that are 2 stroke GM's alive, so he gifted you with some part, time and a whole world of knowledge. My hat is off to both Joe and Scott.
GM/Detroit Diesel literally built this country. Every interstate, National Park, Dam& reservoir projects, marine shipping, etc were all done overwhelmingly by DD . Yes, there were a few Cats & Cummins in the mix but nowhere near the extent of Screaming Jimmies. Merica! Man I love them! It was a sad day for me when Daimler Benz purchased them.
One could also day that EMD hauled most of the freight and passengers after WWII as well. Yes there were also Alcos, Baldwins and Fairbanks Morses (And later GE's), but nowhere near the extent of 567s and 645s. It was an equally sad day for me when EMD was sold to Caterpillar.
There is a silver lining to this. That's so awesome. Like watching you perform magic to get these busses back on the road. To watch Joe with the same enthusiasm is great. Everything was done seemingly effortlessness and grace. So good to see such good hearted giving people still exist. You deserve it Scott!!!!
It’s nice to have a network of real people doing real things ! Way to many people are all about what you can do for them and it’s really fantastic that there are people like Joe and the others around to give some of there wisdom !
Joe is a legend. It's rare when you come across one of those absolutely "gifted" mechanics that just have the knowledge and "the touch". They're a rare breed.
For those who don't know, Kilroy was a character that appeared roughly in WW II and was found on equipment and tents and buildings all over the European, Africa, Australia, and all over the Pacific theatre. It provided a little bit of humor to an otherwise ugly war. I've even seen it in Vietnam and I'm sure it was in the Korean War as well. First time I've seen it in the civilian world but given the age of the coach and the fact that BGM has learned from a Master Mechanic and will eventually pass this knowledge on to many mechanics in the future it's just fitting and I love it. Joe, Your one of a kind. Thank you!
During Vietnam, 'FTA' was what I saw. It was everywhere. Beached our landing craft one time and it was painted on the rudder. Inside valve covers, radars, radios, dumpsters, dishwashers; virtually everywhere.
I'd want to protect that art Joe left on the valve cover any way I could, possibly including running a different cover all together, and saving that one for show. What a stand up guy. Hope we may see more of him in the future.
Thank you Joe for your expertise and willingness to show and teach. Thank you Scott for not just hoarding this special technical mechanical information but videoing it and sharing it for all us to see.
G’day Scott what a terrific bloke there are not many like Joe around these days with the values he has, I really enjoyed watching the two of you work thanks for filming that he restores your faith in humanity. Kind regards John
You are correct Scott, this was a serendipitous experience! Your Funk & Wagnall's would define it as; "something good or fortunate that happens as a result of luck or chance. Like when you meet the person who becomes your spouse because your train is late that day, or Joe when Lenny is having a heart attack!
There's nothing like having a more experienced person show you new tricks my whole life I've experienced something new all the time. Can't wait to hear you talk about how it drove to your next spot God bless Joe
A real friend in Joe. Old Master teaching our younger crowd the basics. Things that would take decades to learn. Joe was fantastic, kind of a fella one would like to drink a beer with.
Man you found a great person and I'm sure you learned a lot. You'll have to get you some of those reamers and gauges. Take care and keep the videos coming I really enjoy your work.
Scott, you and Kelly were greatly blessed this week and last weekend. It's great to see people come together, and work together to help someone else. I'm sure that you woild have gotten Lenny running and got him home, but Joe and Scott and the random people at rest stop demonstrated what made America great. Great video, and like the vast majority of us who follow you, I can't wait for the next video to come out. Mr Rain dancer, please come down to Texas, traveling through the High Plains and into Dallas Fort Worth and we'll kill the fated calf, or most likely the rangy steer, barbecue some brisket and brew up some sweet tea. You'll never want to go back north.
What luck..... I was thinking the learning part was priceless in itself... There are good people out there... I hope to find some in my travels as you have..
Scott, your positive attitude is as enjoyable to witness as your expertise. The wrap-up monologue to your dropped valve saga is inspirational. I have loved the sound of the GM 2-strokes since I was a kid, riding the Sacramento (Regional Transit) "fishbowls" with my grandfather in the 1970's. It has been so fun learning about them and hearing them again. Thank you for all you do to preserve this bit of history.
It's not often one gets to learn from a master like Joe.. not to mention working alongside him hands on.... knowlege should be shared and the experience of a completed project is how lifelong friends are made..... yes it's sad to say dropping a valve was a really good thing but i believe in this case it truely was.
Apart from anything else, your dropped valve made for great viewing - I can’t remember the last time I found videos this compelling. Absolutely wonderful stuff. Thank you all.
It’s all about karma, you are a honest stand up guy , you will get the same in return. He is old school , just like us old school truckers , you don’t take advantage of someone who needs help , because one day it’s going to be you stuck somewhere and need help
True mechanics are willing to share knowledge. Kinda like paying it forward. I imagine you had a few jaw dropping moments when Joe turned you on to new info. Thanks for sharing your knowledge. Great Video!
I've been following you now for a little while and have been surprised by your knowledge because I am a mechanic automotive, not diesel and I thought as I still do for someone self-taught your doing great and I am pleased you met joe not only to get you out of a jam but to increase your knowledge so you can go on helping bus owners even more and if you run in to a problem I'm sure Joe is a phone call away with sound advice, Keep up the good work !
Great deal for you Scott. Guys like Joe are Miracle workers. It's not just their knowledge of how the engine runs and should be set up, it's all the little tweaks they know through years of trial, and experience that can really squeeze that little extra out . He knows what is not written but is between the lines in the manual. Now you are better for what he passed on to you. I worked in the Airline industry for 20 years as a mechanic, and there were guys like Joe, what they knew, you knew, they were free with their knowledge, they were highly respected. There were guys that had secrets, and you couldn't pry anything out of them, and nobody paid them any attention. Really good video.
After seeing Lennie on playa I now have the complete story to how "Joe was here" made it to your valve cover. Definitely worth the wait to see this video and the skill and knowledge Joe has. Your clients will truly benefit from your experience 👍
Used to work on 4-71 and 6v71 engines in the USAF. (mainly in generator sets) I've never seen a governor rebuilt. Anything above a tune up and rack adjustment was depot level maint and was sent to another base. (we did do cylinder liner replacements). Enjoy your channel greatly. Diesels were fun to work on but my ex-wife used to meet me a the door saying "Just go right to the bathtub" She wouldn't get near me until I had a bath.....
Hi scott, thank you for letting us look over your shoulders on this one, Joe is obviously on top of his game, a master of the craft ,and a true friend . We all learned something from this, hope she runs good now without troubles for a while. Best whish's to you and your's, and Joe . From an old mechanic in the uk . Stuart.
It's so awesome watching Joe work his magic, Lenny sounds better than ever now. I hope you picked Joe's brain about the turbo mods while he was there, I bet he could tell you some stories.
👍🏾👍🏾👍🏾You met three or more wonderful angels on this trip I shed a little tears because humanity was at it finest in this little internet and part of the web television. Love it.
You are indeed blessed with good friends Scott. The respect and goodwill is obvious. I know you are very proud. Lenny probably has never sounded so good ,would you agree ?
New to channel and I have to say that the videos with the bent valve on Lenny are some of the best! Scott is humble enough to learn from an expert and admit it... a true professional. If you are ever near Epping, NH and need help, feel free to give a yell! Doug
I really am out of place here, as many of the comments are obviously from diesel engine users or mechanics, but I have to admit that if you judge by sound alone - when he revved up that engine it sounded awesome! It seems so odd that tinkering around with a screwdriver and pliers, and making small adjustments, could change the sound of that monster engine. This was fun to watch! 👍😊
I love that you turned this into a Positive experience ... That machine shop REALLY did some shoddy work.. But. You caught it right away and minimized the damage.. And you got to meet and work with Joe.. It's a good Mech.. that respects and has Humility .. And now Lenny can do what it does best.. Take you to further adventures Well Done Scott..
That engine sounds like a million bucks. I have a lot of respect for someone who really understands what they are doing. Not every mechanic is so in tune with the motors.
Your videos are so valuable in helping me familiar with the Detroits . There is nothing like knowing a piece of machinery to the point that you feel that anything it throws at you , you got it .
Man , Scott what a difference in the sound of the engine, she’s really clicking, get that turbo on and she will click and whistle, I love the way a well tuned diesel runs, good deal, thanks for letting us watch and thank you Joe. There is always a little more to learn.
The world needs more Joe's. We had a retired John Deere mechanic come out and do injection pump work on our combine during harvest. It would nice if they would let us pay them though.
Hi Scott wow joe really has a wealth of knowledge it's so nice to watch two masters at work I bet the work you two have carried out will make Lenny nicer to drive he sure sounds sweeter let's hope it all goes well from now on All the best Derrick
Scott sometimes things are a godsend! ya learned some new tricks from an old hand on 2 strokes, that in itself is worth it cause there are not many of those who know them are left! glad it worked out for you!
"Joe was in the governor," said Scott. Joe WAS the Governor! I could tell when your bus started it was not the same engine as before. It sounds way more powerful. Wishing you and Ms. Kelly the best in your grand adventure. Happy Trails!
As I said before an Older Detroit Master taking the time teaching a younger Master a few tricks. It was cool to see
@@hyperluminalreality1 I think he's a pretty old grasshopper though :)
@@hyperluminalreality1 he knows more than a lot of guys do! two stroke Diesel Mechanics are a dying breed, someones got to keep these engines alive and going!
Joe is at the very top of Detroit Diesel techs. You now know how a master mechanic works, and the quality job that a wizard turns out routinely. I'm from the same area of Oregon and I've crossed paths with Joe a few times.
Very cool..Nothing like a darn good detroit mech....
Joe is a stand-up dude. giving your bus some love!
And you are paying it forward already by sharing Joe's knowledge through these videos. This is one of the best example of friends helping friends I've ever seen.
It’s karma Scott. For all the good will and knowledge you share, it’s your turn to receive some back...
Agreed!
Absolutely!!! What goes around, comes around!
Joe paid it forward! sooner or later Scott and his son will do the same,
It seems pretty obvious to me.
Joe is impressed with what you do, keeping the old dinosaurs that are 2 stroke GM's alive, so he gifted you with some part, time and a whole world of knowledge.
My hat is off to both Joe and Scott.
Friends like Joe are rare and always appreciated.
You attract good people, because you are good people.
Detroit Diesels made in USA amazing it is nearly 70 years old and still going strong!
GM/Detroit Diesel literally built this country. Every interstate, National Park, Dam& reservoir projects, marine shipping, etc were all done overwhelmingly by DD . Yes, there were a few Cats & Cummins in the mix but nowhere near the extent of Screaming Jimmies. Merica! Man I love them! It was a sad day for me when Daimler Benz purchased them.
One could also day that EMD hauled most of the freight and passengers after WWII as well. Yes there were also Alcos, Baldwins and Fairbanks Morses (And later GE's), but nowhere near the extent of 567s and 645s. It was an equally sad day for me when EMD was sold to Caterpillar.
You've really have some top notch people in your corner.
There is a silver lining to this. That's so awesome. Like watching you perform magic to get these busses back on the road. To watch Joe with the same enthusiasm is great. Everything was done seemingly effortlessness and grace. So good to see such good hearted giving people still exist. You deserve it Scott!!!!
It’s nice to have a network of real people doing real things ! Way to many people are all about what you can do for them and it’s really fantastic that there are people like Joe and the others around to give some of there wisdom !
Everything happens for a reason, sir. You learned some new things that you get to pay forward. Keep those cards and letters coming!!!
GREAT TO SEE THEY ARE STILL GOOOOOD PEOPLE AROUND.
Joe is a legend. It's rare when you come across one of those absolutely "gifted" mechanics that just have the knowledge and "the touch". They're a rare breed.
Smart man can always learn something, your videos are very informative,and then this fella comes along . Good thing you got connected with him.
For those who don't know, Kilroy was a character that appeared roughly in WW II and was found on equipment and tents and buildings all over the European, Africa, Australia, and all over the Pacific theatre. It provided a little bit of humor to an otherwise ugly war. I've even seen it in Vietnam and I'm sure it was in the Korean War as well.
First time I've seen it in the civilian world but given the age of the coach and the fact that BGM has learned from a Master Mechanic and will eventually pass this knowledge on to many mechanics in the future it's just fitting and I love it.
Joe,
Your one of a kind.
Thank you!
During Vietnam, 'FTA' was what I saw. It was everywhere. Beached our landing craft one time and it was painted on the rudder. Inside valve covers, radars, radios, dumpsters, dishwashers; virtually everywhere.
That sounds like a totally different engine!!!
from what joe has taught you or helped you with,,that valve was a blessing in disguise
friends like that are priceless..
And not a computer in sight. Love a tech who can feel the engine in his soul.
Wow, that thing sounds lively now!
I'd want to protect that art Joe left on the valve cover any way I could, possibly including running a different cover all together, and saving that one for show. What a stand up guy. Hope we may see more of him in the future.
Thank you Joe for your expertise and willingness to show and teach. Thank you Scott for not just hoarding this special technical mechanical information but videoing it and sharing it for all us to see.
Love the Kilroy! Man, that thing sounds like beast now!
Sounds like Lenny grew a pair!
@@hillbillyb4u A pair of what? 😇
It's sounding really good! Love it when you find a person that just really knows their stuff.
Joe is a very good man and you are a very lucky man.
G’day Scott what a terrific bloke there are not many like Joe around these days with the values he has, I really enjoyed watching the two of you work thanks for filming that he restores your faith in humanity. Kind regards John
You are correct Scott, this was a serendipitous experience! Your Funk & Wagnall's would define it as; "something good or fortunate that happens as a result of luck or chance. Like when you meet the person who becomes your spouse because your train is late that day, or Joe when Lenny is having a heart attack!
Old pros are hard to beat, will always love the sound of 671's from my GMC 9500 tandem driving days, back in the middle 1970's.
The Professor taught class in the last two videos. Thanks Joe and Scott.
There's nothing like having a more experienced person show you new tricks my whole life I've experienced something new all the time. Can't wait to hear you talk about how it drove to your next spot God bless Joe
A real friend in Joe. Old Master teaching our younger crowd the basics. Things that would take decades to learn. Joe was fantastic, kind of a fella one would like to drink a beer with.
Man you found a great person and I'm sure you learned a lot. You'll have to get you some of those reamers and gauges. Take care and keep the videos coming I really enjoy your work.
Scott, you and Kelly were greatly blessed this week and last weekend. It's great to see people come together, and work together to help someone else. I'm sure that you woild have gotten Lenny running and got him home, but Joe and Scott and the random people at rest stop demonstrated what made America great. Great video, and like the vast majority of us who follow you, I can't wait for the next video to come out.
Mr Rain dancer, please come down to Texas, traveling through the High Plains and into Dallas Fort Worth and we'll kill the fated calf, or most likely the rangy steer, barbecue some brisket and brew up some sweet tea. You'll never want to go back north.
What luck..... I was thinking the learning part was priceless in itself... There are good people out there... I hope to find some in my travels as you have..
Scott, your positive attitude is as enjoyable to witness as your expertise. The wrap-up monologue to your dropped valve saga is inspirational. I have loved the sound of the GM 2-strokes since I was a kid, riding the Sacramento (Regional Transit) "fishbowls" with my grandfather in the 1970's. It has been so fun learning about them and hearing them again. Thank you for all you do to preserve this bit of history.
Man I do believe it sounds stronger than ever!! Love that Joe signed the valve cover.
Another awesome video! The experience that man has is invaluable
It's not often one gets to learn from a master like Joe.. not to mention working alongside him hands on.... knowlege should be shared and the experience of a completed project is how lifelong friends are made..... yes it's sad to say dropping a valve was a really good thing but i believe in this case it truely was.
Apart from anything else, your dropped valve made for great viewing - I can’t remember the last time I found videos this compelling. Absolutely wonderful stuff. Thank you all.
Let’s all thank Joe, Scott and Gary.this is what Real America is all about. People helping People.
Governers are complex to tune, Joe is a true Master😊😎
G'day Kevin from Australia.
Really great videos over the past few days .
You learn well grasshopper. ✌
You just never know how God is going to bless you. You, my friend, have been very blessed! Sending happy thoughts your way for the rest of your trip!
It’s all about karma, you are a honest stand up guy , you will get the same in return. He is old school , just like us old school truckers , you don’t take advantage of someone who needs help , because one day it’s going to be you stuck somewhere and need help
True mechanics are willing to share knowledge. Kinda like paying it forward.
I imagine you had a few jaw dropping moments when Joe turned you on to new info.
Thanks for sharing your knowledge.
Great Video!
I think it's ready for the turbo now.
WOW, what a great episode watching Joe work his magic and helping BGM with his experience and passing along his knowledge.
I've been following you now for a little while and have been surprised by your knowledge because I am a mechanic automotive, not diesel and I thought as I still do for someone self-taught your doing great and I am pleased you met joe not only to get you out of a jam but to increase your knowledge so you can go on helping bus owners even more and if you run in to a problem I'm sure Joe is a phone call away with sound advice, Keep up the good work !
Great deal for you Scott. Guys like Joe are Miracle workers.
It's not just their knowledge of how the engine runs and should be set up, it's all the little tweaks they know through years of trial, and experience that can really squeeze that little extra out .
He knows what is not written but is between the lines in the manual.
Now you are better for what he passed on to you.
I worked in the Airline industry for 20 years as a mechanic, and there were guys like Joe, what they knew, you knew, they were free with their knowledge, they were highly respected.
There were guys that had secrets, and you couldn't pry anything out of them, and nobody paid them any attention.
Really good video.
After seeing Lennie on playa I now have the complete story to how "Joe was here" made it to your valve cover. Definitely worth the wait to see this video and the skill and knowledge Joe has. Your clients will truly benefit from your experience 👍
Praise Joe!!! But seriously his mastery is incredible to watch!!!
Another great educational video on Detroit diesels. He seems to have a lot of knowledge about the detroits for sure. Have a great day!!!
This vid and your closing comment made me so pleased. Watching and learning from a master is something to cherish. Good one!
A Blessing in Disguise.
Transfering a lifetime of knowledge to the next generation
Used to work on 4-71 and 6v71 engines in the USAF. (mainly in generator sets) I've never seen a governor rebuilt. Anything above a tune up and rack adjustment was depot level maint and was sent to another base. (we did do cylinder liner replacements). Enjoy your channel greatly. Diesels were fun to work on but my ex-wife used to meet me a the door saying "Just go right to the bathtub" She wouldn't get near me until I had a bath.....
Joe is a guy who makes the world a better place👍
Hi scott, thank you for letting us look over your shoulders on this one, Joe is obviously on top of his game, a master of the craft ,and a true friend . We all learned something from this, hope she runs good now without troubles for a while. Best whish's to you and your's, and Joe . From an old mechanic in the uk . Stuart.
Wow it all worked out and Lenny sounds amazing he sounds happy and full of life
I really enjoyed watching Joe work his magic...reminds me of mentors I've had in my life .
What an awesome guy! (Joe) There really are good people in the world. It's refreshing.
Thanks for the video.
It's so awesome watching Joe work his magic, Lenny sounds better than ever now. I hope you picked Joe's brain about the turbo mods while he was there, I bet he could tell you some stories.
👍🏾👍🏾👍🏾You met three or more wonderful angels on this trip I shed a little tears because humanity was at it finest in this little internet and part of the web television. Love it.
You’re never too old to learn new tricks 👍🏻👍🏻
I believe Joe is the man that can blueprint and balance one of those two-strokes. He really knows his 💩. 🇺🇸👍
You are indeed blessed with good friends Scott. The respect and goodwill is obvious. I know you are very proud. Lenny probably has never sounded so good ,would you agree ?
Thrilled that it all worked and loved seeing everybody helping you! Made my day
Jim
New to channel and I have to say that the videos with the bent valve on Lenny are some of the best! Scott is humble enough to learn from an expert and admit it... a true professional. If you are ever near Epping, NH and need help, feel free to give a yell! Doug
I haven't seen a chad in years, proper old school.
Thank You Joe for your expertise in helping GBM. The DD sure sounds different and new.
Joe, you're a true gentleman. So kind of you to help out Scott.
Only a master goes to work on a governor like that. Sounds great.
I really am out of place here, as many of the comments are obviously from diesel engine users or mechanics, but I have to admit that if you judge by sound alone - when he revved up that engine it sounded awesome! It seems so odd that tinkering around with a screwdriver and pliers, and making small adjustments, could change the sound of that monster engine. This was fun to watch! 👍😊
I love that you turned this into a Positive experience ... That machine shop REALLY did some shoddy work.. But. You caught it right away and minimized the damage.. And you got to meet and work with Joe.. It's a good Mech.. that respects and has Humility .. And now Lenny can do what it does best.. Take you to further adventures Well Done Scott..
That engine sounds like a million bucks. I have a lot of respect for someone who really understands what they are doing. Not every mechanic is so in tune with the motors.
Joe is a good man! Pay it forward Scott!! Great video as always and everything worked out great for you!
PS: that's west coast weather for ya!
It is always amazing when you meet someone with so much knowledge who is willing to share it with you
Joe is the man.
Great poeple, great experience, a good old handmade thumbs up to all of you, I think it sounds smoother than ever before.
Scott, One word " Karma " cheers from San Francisco.
Your videos are so valuable in helping me familiar with the Detroits . There is nothing like knowing a piece of machinery to the point that you feel that anything it throws at you , you got it .
Really great video, showing some really great guidance from a wonderful, master mechanic! These are the moments that make a difference!
Great service by Joe and the others helping to keep the knowledge alive
Man , Scott what a difference in the sound of the engine, she’s really clicking, get that turbo on and she will click and whistle, I love the way a well tuned diesel runs, good deal, thanks for letting us watch and thank you Joe. There is always a little more to learn.
The world needs more Joe's. We had a retired John Deere mechanic come out and do injection pump work on our combine during harvest. It would nice if they would let us pay them though.
Best most educational video yet!!!! That guy is a keeper!! Better send him a Xmas card this year!
Joe seems like a good friend to have.
Hi Scott wow joe really has a wealth of knowledge it's so nice to watch two masters at work I bet the work you two have carried out will make Lenny nicer to drive he sure sounds sweeter let's hope it all goes well from now on
All the best Derrick
Way cool man! You will be a favorite for sure! Keep learning and giving credit!
Looks like Joe is an artist.
A master at work, wonderful sight.
Wow, sure sounds mean today! revs like a dirt bike!
I am in Ashland exit 14. Have a safe trip love your videos.
Scott sometimes things are a godsend! ya learned some new tricks from an old hand on 2 strokes, that in itself is worth it cause there are not many of those who know them are left! glad it worked out for you!
"Joe was in the governor," said Scott. Joe WAS the Governor! I could tell when your bus started it was not the same engine as before. It sounds way more powerful.
Wishing you and Ms. Kelly the best in your grand adventure. Happy Trails!
LMAO "Foo was here" Graffitti! Good on ya Joe!
Idle hold, take off without throttle..... Sounds like old School DDEC to me.
Well glad it turned out like it did.enjoyed you guys.I would have I would’ve liked knowing a guy like Joe when I ran my 8v71. Thanks again
Good job brothers and well done JOE ..i love that ( joe was here )awesome! Man and hope to see more driving videos !
I’m really happy for you Scott! If it wasn’t for that valve the whole engine may have went!