ฝัง
- เผยแพร่เมื่อ 23 ก.ค. 2024
- Click bit.ly/sub2jprc to SUBSCRIBE
Thanks for the long wait and this is my final review of this RCRUN piggyback shocks. They are great looker but do they perform as good as they look? Watcing the video to find out and I will show you how to build these shock with no air bubbles in side and tune them right for your ride.
Skip to 5:44 for the shock build section. • JPRC Axial RR10 Bomber...
Also check out these parts from STRC used in my RR10 Bomber on STRC official website.
www.teamstrc.com/index.php?rou...
I picked up these from an the “ RC Factory Store” on AlixExpress seller from China. www.aliexpress.com/store/818238
www.aliexpress.com/store/produ...
www.aliexpress.com/store/produ...
RADIO CONTROL NETWORK (MCN)
Come join the only Radio Controlled Multi Channel Network on TH-cam! bit.ly/1PPNaRA
RADIO CONTROL NETWORK (MCN)
Come join the only Radio Controlled Multi Channel Network on TH-cam! bit.ly/1PPNaRA
JPRC SOCIAL MEDIA
Facebook - / jprchobbies
Twitter - / jprchobbies
"Royalty Free Music by audiomicro.com/royalty-free-music"
© JPRC Hobbies, All Rights Reserved. - ยานยนต์และพาหนะ
Another great how-to instructional video in the can. Thanks Joe 🤙🏼
Met those shocks already, thanks for clue.
1:04 Ha! You should have seen my face when I went to put the last two screws in, only to find that very fitment issue. I felt like Cinderella's step sister where my shock 'foot' would not fit in the link 'shoe'. Thank you for providing a solution (meanwhile I switched to a scaler shock with next to no 'foot').
Great video...
You are awesome man
Hi Joe, what are you using for front lower links? They look awesome ! Thanks for the great vids.
Nice video.
Hello, i'm want to ask what tire are you using ? And where can buy it ? Thank you so much :)
I can't find the shocks you bought can you give me a direct link?
Q medida tienen los amortiguadores por favor.se los voy a colocar a mí bomber.no estoy seguro si pedirlos de 12,3cm o12,5cm.muchas gracias,seguid trabajando así!
Thank you an i think u dissed them enogh ill be only one on my block with a set
The problem I have is where I install a rear shocks the top there's the piece that's blocking it and I don't know how to move it. I got the bottom one moved but not the top. Please reply
JPRC man I just forgives it out I looked closer into your vid and found out how to do it. Thank you!
At the end me buying a kit ,, 1000 dollars be ok to build a custom one without elect, thanks ,awesome build
when i screw the thumb screw down it pushes all the oil out of the reservoir
I have a question, Can you do the same thing with yeti trophy truck? Like doing The dual shock setup in the rear of the trophy truck?
Note these shocks are only 123mm the yeti needs at least 145 mm in the rear second shock position
+JPRC so you can't do that?
What should I do if my hose is all been used. can you get some replacement hoses for it?
i see they sell on ebay now maybe you can message them there?
Hi JPRC! do you know about any "double steering" upgrade for this kit?? I can't find anything, maybe i need to ask directly to axial custome service.....Thanks in advance for any answer....
+MrDavide1976 you mean 4 wheel steering? The bomber and wraith have same axles and you can take the part most from wraith for the most part to do the same. Here is how axial did it www.axialracing.com/blog_posts/903300000
Hi! Yes, 4 wheel steering, sorry, by the way, i knew about the link you gave me, but i thought it was for wraith only. I'm going to get a bomber so now i don't really know its framework, and i don't know wraith's framework neither, i never put my hands on them. thanks for the help...
You dont need double shocks. And get rid of the stock trailing arms. I have tuned mine perfectly!
Hey man I bought a set of these shocks... I keep having issues with the hose getting bubbles in them and the hose will either pop and split or it will get a bubble and stay that way.
do you have any ideas on why it does that or any ways to fix it?
It happens where the oil is over filled and I found the blue tube and 10w oil. I reported the same issue to the seller hopefully they will make some with stronger tubes
Hi JPRC, i'm planning to buy this shocks, but i'm a little bit afraid of this issue.. Have you got this problem yet on this beauty, or have you solved this problem? My girlfriend has a Bomber, and i'm looking for the same setup than you :)
do you know if anyone sells any hoses that can take place of the stock ones?
not that i am aware of. but you can stick to 10w oil and careful not to overfill. you should do ok.
Which do you like better the hot racing or the rc run shocks?
Marvin Wood the Rcrun only adds to the look and doesn’t do much in performance due to the small diameter. I went back axial and proline shocks and the setup solely for performance instead of scale look.
What rims do you have on there?
Those are stock rtr wheel just painted silver/yellow/Matte clear
Those shocks are like shit, they leak everywhere, near the pipe tube goes into the shock, they are a nightmare, please choose other shocks... damn! It's 2 days i'm turning crazy with them!
these shocks suck every time i put it together and cycle it a few times it fills up with air and i sealed everything 3 different times. don't buy these there less than junk
Hey joe I ended up purchasing these shocks and mine leak really bad after following every step of your video any suggestions?
JGRC try AE green slime to treat your oring I do it on all my shock tunings
JPRC awesome thank you. Your videos are sweet👍🏻
mine came with no o rings for the resivore plunger. leaks out every drop.