2020+ Silverado/Sierra 2500/3500 airbag control module removal
ฝัง
- เผยแพร่เมื่อ 11 ก.ย. 2024
- Disconnect battery before removing airbag control module or before removing any airbags or seat belts.
2020 2021 2022 Chevy Silverado GMC Sierra 2500/3500 airbag control module removal. This video may pertain to the 2019+ GM 1500 as well. I am not sure.
Tools required:
T-50 torq for seats
18mm socket for side of center counsel
10mm socket for inside counsel storage bolts & nuts holding control module down.
7mm for driver side trim panel screw
![[HOW TO] Upgrade Dash Cluster & Steering Wheel in a 2019-2022 Silverado LTD Custom](http://i.ytimg.com/vi/HhemTg6J7Ug/mqdefault.jpg)
Helpfull video,thanks.
Great video! Do you know the fuse location of this module?
Bought a truck and unfortunately was scammed by previous owner. It needs side curtain bags and the seatbelts unlocked. Guessing I need to do everything prior to sending in the module? Is there a way to confirm whether or not he replaced the seat airbags? It’s a 2020 Silverado 2500 like you’re working on.
Thanks dude. Exactly what I needed.
Very nice video.
Thank you !!! Good men !!!
Hope it helped ya out. Wasn’t super detailed through the process but I couldn’t find a video at all so it is something!
Wondered if your passenger side air bag didn't blow, would you have to send in the passenger side seat belt for repair ?
Wouldn’t have to no. Make sure there’s no codes for that side first. Visually inspect it make sure the pre tensioner isn’t collapsed
👍👍👍👍👍
Quick question. Recently had some guys remove my headliner on my 21 trailboss for a sound upgrade. My headliner was left at the shop but as I’m driving 15 minutes away my air bad service light went off. Air bags look fine and don’t seem to be messed with. Do I need to send the airbag module for a reset? And seat belts? Seat belt weren’t messed with
No. If airbags were not deployed you don’t need to send module off or belts off. Likely you have an open circuit somewhere. Take it to a shop that has a scanner able to read airbag system and it will say where the fault is. Or else take to dealer if you’re under warranty
I have a question i already put a new air bag on my 2021 gmc sierra if i conect the battery will the air bag deploy again i havent fix the module
No it won’t but I’d just keep the module unplugged anyway
Quick question, did you have to replace all of the impact sensors?
Nope didn’t replace any
@@reesebakken80 Did this process completely remove the SRS warning light? I’ve replaced the clock spring, seat belts, pre tensioners and haven’t changed impact sensors nor fuses. I wonder if resetting my module will remove my srs warning light? Thanks for the feedback!
@@DifferentMystery you don’t even need to replace clock spring. This driver wheel bag went out as well. All you need to do is take out your seat belts in full. Keep pre tensioners on. Take airbag control module out, located under center counsel as shown. Take seat belts and control module and send them in to a company like MyAirbags and they will reset them and send them back to you and you will have no airbag light on. No need to buy any new seat belt parts during the process. I do quite a few rebuilders along side my insurance body work.
@@reesebakken80 thanks for the info! I appreciate it
Do you have a part number for this?
For what exactly?
The air bag control module
@@brentbriskey348 you can get them reset. Go on eBay and type in safety restore and you buy the service and ship your module and seat belts to them
Mine has a short to ground. Dealer already diagnosed it. But they want $1,600 to replace it
@@brentbriskey348 after collision and airbags went off or seat belts locked up? It’s repairable. It will say short to ground