Brushless BLDC motor ESC controller circuit

แชร์
ฝัง
  • เผยแพร่เมื่อ 24 ธ.ค. 2024

ความคิดเห็น • 223

  • @daveb7999
    @daveb7999 10 หลายเดือนก่อน +3

    You are a great teacher, I especially enjoy watching your impecable soldering techniques.
    I will be referencing this video as I re-use/ repurpose 3-phase motors.
    Thank you for sharing your projects, many of them are very useful.

  • @dusblb
    @dusblb ปีที่แล้ว +2

    esc speed controller simple....powerfull... good job

    • @CreativeTechos
      @CreativeTechos  ปีที่แล้ว

      Thanks for watching my friend 🙂

    • @dusblb
      @dusblb ปีที่แล้ว

      are you welcome@@CreativeTechos

  • @mugiraharjo6270
    @mugiraharjo6270 ปีที่แล้ว

    amazing, master, complete, detail,

  • @baopham1419
    @baopham1419 ปีที่แล้ว

    My bldc is work now thank❤

  • @waqarking9615
    @waqarking9615 ปีที่แล้ว +2

    Very good

    • @CreativeTechos
      @CreativeTechos  ปีที่แล้ว

      Thanks for watching my friend 🙂

  • @andrewel5383
    @andrewel5383 2 ปีที่แล้ว +28

    Curious, how is this working? Like where the oscillation signal coming from to power the 3 PHase signal? Are the mosfets oscillating on their own, if so how are they oscillating at a different phase from each other? Thank you in advance

    • @NeoFrontierTechnologies
      @NeoFrontierTechnologies 2 ปีที่แล้ว +12

      I had a look at the other comments to see if anyone else actually built this circuit... looks like not. I would also like a circuit explanation before I would build it. I have experimented with this kind of 3 mosfet instead of 6 circuits before. But use a microcontroller to trigger the phases consecutively. Perhaps there is a way to trigger the mosfets via a diode during the emf collapse phase. At a glance at this circuit it might do something like that. But who knows if it is worth any further attention if the channel owner does not have the decency to explain the working of this circuit. I do not know his agenda, but I have seen people do anything for views regardless of how much of another person's time he is wasting with a bogus circuit...

    • @two_number_nines
      @two_number_nines 2 ปีที่แล้ว +2

      @@NeoFrontierTechnologies it works. this is a modification of a 3 stage flasher circuit, where timing isn't controlled by RC groups, but the voltage on the motor windings. You can also look at it as a modified ZVS driver, but instead of driving one LC circuit it drives 3 phases. The rotor mass and speed are the substitute for the RC/LC timing achieved in the originals.

    • @rocksmith3733
      @rocksmith3733 ปีที่แล้ว +4

      ,Don't border trying it it's fake

    • @dutchsailor6620
      @dutchsailor6620 ปีที่แล้ว +1

      @@rocksmith3733 It does work, but has trouble starting the engine. Furthermore,since it outputs a square wave instead of a modified sinus, it runs rather rough and delivers lesser torque. I used it to drive a modified car alternator but switched to a six mosfet design to power a small lathe where smoother running pays of in a better surface finish.

    • @Sosoelisashvili
      @Sosoelisashvili 11 หลายเดือนก่อน

      @@rocksmith3733it’s real I try on hoverboard motor

  • @mojtabazakeri2521
    @mojtabazakeri2521 ปีที่แล้ว +1

    Excellent.

    • @CreativeTechos
      @CreativeTechos  ปีที่แล้ว

      Thanks for watching my friend 🙂

  • @rezatavan5048
    @rezatavan5048 7 หลายเดือนก่อน

    Excellent ❤❤❤

  • @NoobMrAlex
    @NoobMrAlex 5 หลายเดือนก่อน +1

    Can you use it with tip122? I have many and have no use for them.

  • @elyaabe.inventions
    @elyaabe.inventions 2 ปีที่แล้ว +2

    Thank you brother for this valuable information. I wish you success in your career. Thank you

    • @CreativeTechos
      @CreativeTechos  2 ปีที่แล้ว

      Thanks for watching 🙂

    • @TranLuc-cm8ep
      @TranLuc-cm8ep 4 หลายเดือนก่อน

      Fet 3205 có làm được không anh ơi

  • @ekulda
    @ekulda ปีที่แล้ว +1

    nice tutorial :) Thank you.

  • @joseluisvaqueiroa.8801
    @joseluisvaqueiroa.8801 ปีที่แล้ว +3

    Gracias se lo ve un circuito muy sencillo ideal para experimentar

    • @CreativeTechos
      @CreativeTechos  ปีที่แล้ว +1

      Thanks for watching my friend 🙂

  • @akinnon2000
    @akinnon2000 7 หลายเดือนก่อน

    Thanks for video.

  • @Qubnix
    @Qubnix 2 ปีที่แล้ว +3

    Why phases of motor are connected to transistor heat dissipator?

    • @CreativeTechos
      @CreativeTechos  2 ปีที่แล้ว

      Phases of motor is connected to MOSFET drain as three Fets works as oscillator to complete the rotation. Since drain pin is internally connected with body of mosfet. But every drain of mosfet is isolated from heatsink with silicon pads and screw washer bushes.

  • @НикитаТеслюк-х5м
    @НикитаТеслюк-х5м ปีที่แล้ว +2

    I liked the video very much.
    Thanks a lot.
    I would like to see this three-phase control circuit, but without connect a neutral wire

  • @MonicaGarcia-cq3kp
    @MonicaGarcia-cq3kp 2 ปีที่แล้ว +6

    Excellent circuit, when will we be able to see the design that allows us to connect to three-wire motors?

    • @CreativeTechos
      @CreativeTechos  2 ปีที่แล้ว +2

      I'm already working on that, soon going to upload, Thanks for watching 🙂

    • @MonicaGarcia-cq3kp
      @MonicaGarcia-cq3kp 2 ปีที่แล้ว +2

      @@CreativeTechos I look forward to it and congratulations for your work, it is excellent

    • @CreativeTechos
      @CreativeTechos  2 ปีที่แล้ว

      Thanks for watching 🙂

    • @autogaming751
      @autogaming751 2 ปีที่แล้ว +1

      @@CreativeTechos hlw bro,,,,,, we r w8 for nXt pr8!! Please 🥺🥺, mk a vdo

    • @CreativeTechos
      @CreativeTechos  2 ปีที่แล้ว

      Working on that, I'll upload soon, please wait patiently.

  • @mostwantedmes
    @mostwantedmes ปีที่แล้ว +1

    I did it with irlb8314 moffet but not work , can you help me ?

  • @autogaming751
    @autogaming751 2 ปีที่แล้ว +3

    Who to RiP DELA?
    I have Many drone motore.. Plz make a video

    • @CreativeTechos
      @CreativeTechos  2 ปีที่แล้ว

      I'm working on DELTA version, I'll soon upload that video.

  • @jozefnovak7750
    @jozefnovak7750 ปีที่แล้ว

    Super! Thank you very much!

  • @marcocruz263
    @marcocruz263 ปีที่แล้ว

    Roda direto sem impulsionar com a mão?

  • @roberdbarthelus1410
    @roberdbarthelus1410 3 หลายเดือนก่อน

    Super

  • @imbaba7270
    @imbaba7270 2 ปีที่แล้ว +2

    can i run 220vdc (bldc) motor from this circuit?

    • @CreativeTechos
      @CreativeTechos  2 ปีที่แล้ว

      Nope, only for dc BLDC motor

    • @imbaba7270
      @imbaba7270 2 ปีที่แล้ว +1

      @@CreativeTechos yes but 220vdc bldc small motor avilable in market, how to run that motor?

    • @CreativeTechos
      @CreativeTechos  2 ปีที่แล้ว

      How many wires it has?

    • @imbaba7270
      @imbaba7270 2 ปีที่แล้ว

      @@CreativeTechos 3

    • @imbaba7270
      @imbaba7270 2 ปีที่แล้ว


      DC 220V High Speed Brushless Motor 3 Phase with Dual Ball Bearing

  • @الزُبيديأبوعادل
    @الزُبيديأبوعادل 2 ปีที่แล้ว +2

    That was an awesome idea brother, thanks for sharing.

    • @CreativeTechos
      @CreativeTechos  2 ปีที่แล้ว

      My pleasure 😀, Thanks for watching

    • @chusdiaz9160
      @chusdiaz9160 2 ปีที่แล้ว

      @@CreativeTechos 🤡 Cuentista vividor ¡Muestra esquema y no confundas y aburras a la gente!🤡

  • @lohikarhu734
    @lohikarhu734 2 ปีที่แล้ว +2

    I would prefer a small bend on the end of the resistors, where you solder to the MOSFET legs...

  • @MartinAntonioCastroPerez
    @MartinAntonioCastroPerez ปีที่แล้ว +1

    hola , que tipo de alimentación utiliza el circuito de control

  • @rcexplorerkh734
    @rcexplorerkh734 2 ปีที่แล้ว +1

    Really great brother!!

  • @advurfana5270
    @advurfana5270 2 ปีที่แล้ว +1

    Excellent

  • @mkr32
    @mkr32 2 ปีที่แล้ว +1

    Waiting for other video as you told

    • @CreativeTechos
      @CreativeTechos  2 ปีที่แล้ว

      Thanks for your support, I'll soon upload

  • @cincoXplorer
    @cincoXplorer 2 ปีที่แล้ว +1

    This just like flip flop....amazing idea

    • @CreativeTechos
      @CreativeTechos  2 ปีที่แล้ว +1

      Thanks for watching my friend 🙂

  • @babukartik6124
    @babukartik6124 2 ปีที่แล้ว +1

    Please give the link for your video for converting Delta winding to WYE winding.

    • @CreativeTechos
      @CreativeTechos  2 ปีที่แล้ว

      No need to change winding, I'm uploading soon esc circuit for Wye bldc motor.

  • @RixtronixLAB
    @RixtronixLAB 2 ปีที่แล้ว +1

    Nice video, thanks :)

    • @CreativeTechos
      @CreativeTechos  2 ปีที่แล้ว

      My pleasure, Thanks for watching 🙂

  • @takko-xd6tk
    @takko-xd6tk ปีที่แล้ว +1

    WUV is connected to heat sink, why is the motor running?

    • @CreativeTechos
      @CreativeTechos  ปีที่แล้ว

      It is isolated from heatsink using silicon TO-220 Pads and plastic washers.

  • @madhukardube9586
    @madhukardube9586 ปีที่แล้ว +4

    What are the specs of motor, supply voltage and RPM?

  • @jaguaracialvescardosocardo3920
    @jaguaracialvescardosocardo3920 2 ปีที่แล้ว +6

    Excelente informação muito obrigado parabéns 👏👏👏👏

  • @cobausk
    @cobausk 2 ปีที่แล้ว +1

    excelente ,minhas congratulaçoes 👍🙏

  • @abdullahbatis6780
    @abdullahbatis6780 ปีที่แล้ว

    if it a sensor bldc, can i do the same with sensorless motor?

  • @AnsariFarhanAli7
    @AnsariFarhanAli7 ปีที่แล้ว

    dear can we run ac dc celling fan on this circuit

  • @romsaymwiti9387
    @romsaymwiti9387 ปีที่แล้ว +1

    what's the maximum voltage those mosfet can withstand.

  • @jameslange7937
    @jameslange7937 6 หลายเดือนก่อน

    how to connect if the windings connected inside are in ''delta'', without a common point?

  • @SuryaEdie
    @SuryaEdie 2 ปีที่แล้ว +1

    the output of controller ac or dc , thank you🙏🙏

    • @CreativeTechos
      @CreativeTechos  2 ปีที่แล้ว

      It is DC

    • @SuryaEdie
      @SuryaEdie 2 ปีที่แล้ว +1

      @@CreativeTechos thank you

    • @CreativeTechos
      @CreativeTechos  2 ปีที่แล้ว

      My pleasure, Thanks for watching 🙂

  • @Edmorbus
    @Edmorbus 2 ปีที่แล้ว +1

    Thanks for sharing

  • @Dimon992
    @Dimon992 ปีที่แล้ว

    Здравствуйте. Такой вопрос. А можно из таких транзисторов сделать такое как у вас на видео IRFS 630B, диоды UF 4004 или IN 4004A Y423, и резистор МЛТ 1 КО ИВ 9.

  • @harunk22
    @harunk22 2 ปีที่แล้ว

    Çok güzel bravo 👏👏👏

  • @aparecidomarcilio1181
    @aparecidomarcilio1181 8 หลายเดือนก่อน

    Como fazer isso compressor de ar CONDICIONADO BLDC ?

  • @singingzone3056
    @singingzone3056 2 ปีที่แล้ว +1

    Hey..are u there??
    What about that spot welder as I had told u to make b4 one month??
    Reply...must

  • @MrBoi96969
    @MrBoi96969 2 ปีที่แล้ว +2

    bro plzzz make video on how to run that bldc drone motor without re winding plz

    • @CreativeTechos
      @CreativeTechos  2 ปีที่แล้ว +1

      Yes, I'm working on it, I'll try to upload ASAP

  • @techmind8867
    @techmind8867 ปีที่แล้ว +1

    Can anyone tell how to do WYE winding when converting brush motor into brushless?

    • @martinb.770
      @martinb.770 ปีที่แล้ว

      Converting doesn't make sense, as brushless ones have another magnet patterns (typical 14 in the rotating part)
      There are tons of BLDCs in trashed computer drives and fans to start experiments.

  • @MalithmadushanSenevirath-jh2mv
    @MalithmadushanSenevirath-jh2mv ปีที่แล้ว

    Can or can't alternator use ???

  • @arristo
    @arristo 2 ปีที่แล้ว +1

    Good Job...what about the max Amp??

  • @zakirhussainsamoon5130
    @zakirhussainsamoon5130 2 ปีที่แล้ว +1

    how much volt this cyrcut work???

  • @nsbharathi4402
    @nsbharathi4402 2 ปีที่แล้ว +2

    Sir I want three bldc motor controller of delta connection 🙏🙏🙏🙏

    • @CreativeTechos
      @CreativeTechos  2 ปีที่แล้ว +1

      I'll soon upload video for delta version, Thanks for watching my friend 🙂

  • @arduinomaquinas
    @arduinomaquinas ปีที่แล้ว

    Good job🇧🇷🇧🇷🇧🇷

  • @romeoj387
    @romeoj387 2 ปีที่แล้ว +11

    My BLDC only has 3 pin connection

    • @CreativeTechos
      @CreativeTechos  2 ปีที่แล้ว +3

      I'll soon upload video for 3 Wires also.

    • @pragatmudra8372
      @pragatmudra8372 2 ปีที่แล้ว +1

      Your bldc is Delta configured

    • @chusdiaz9160
      @chusdiaz9160 2 ปีที่แล้ว

      @@CreativeTechos 🤡 Charlatán copiando diseños de otros ¡Muestre el esquema vividor de cuentos! Deje de liar y complicar a la gente con 5 minutos aburridos🤡💩

    • @albysHub2006
      @albysHub2006 2 ปีที่แล้ว +1

      @@CreativeTechos Can u make that pls? I need that

    • @CreativeTechos
      @CreativeTechos  2 ปีที่แล้ว

      Upload ASAP I'm already working on that, ist version will be without microcontroller

  • @AndrejGavriluk
    @AndrejGavriluk ปีที่แล้ว

    Для электровелосипеда такая схема подойдёт ?

  • @valtersouzaribeiro761
    @valtersouzaribeiro761 2 ปีที่แล้ว +3

    Bom dia parabens muito bom

  • @yitik11
    @yitik11 2 ปีที่แล้ว +1

    Selamlar 24 wolt dc fırçasız için devre yaparmısınız

    • @CreativeTechos
      @CreativeTechos  2 ปีที่แล้ว

      I'll try to upload ASAP, Thanks for watching 🙂

  • @progyaranjanshadhukhan5734
    @progyaranjanshadhukhan5734 2 ปีที่แล้ว +2

    Can I use this circuit to operate bldc ceiling fan?

  • @danhayes5225
    @danhayes5225 ปีที่แล้ว +1

    what do u mean by Esc ? i thought that meant escape. What on earth does that have to do with anything?

    • @arjunskumar722
      @arjunskumar722 11 หลายเดือนก่อน

      Electronic Speed Controller (ESC)

  • @marcocruz263
    @marcocruz263 ปีที่แล้ว

    Tem como fazer com sensor hall para impulso automático???

  • @boasnovasonline8764
    @boasnovasonline8764 2 ปีที่แล้ว +1

    friend, a simple question, this yellow wire? is it positive from the battery or from the power source? and the blue wires?

    • @CreativeTechos
      @CreativeTechos  2 ปีที่แล้ว

      Yellow wire is positive going to dc +ve and all 3 blue wires is gnd and going to Mosfet as mosfets supplies -ve to motor one by one to complete turns. Like when ist Mosfet supplies -ve to motor 2nd & 3rd Mosfet is off, and when 2nd, ist & 3rd is off, and when 3rd, ist and 2nd is off. And this process happens continuously in fast mosfet switching speed

    • @boasnovasonline8764
      @boasnovasonline8764 2 ปีที่แล้ว

      @@CreativeTechos perhaps inside the motor, for example, the last 3 terminals of the 'Y' connection would be the correct neutral? and the other wires the phases??that go to the comtrtolador? i always thought these wires were positive and n negative

    • @davey2k12
      @davey2k12 2 ปีที่แล้ว

      @@boasnovasonline8764 your kinda right but it's an AC signal 3 phase shifted by some degree but it's not sine wave probably pulsed DC or like a sawtooth wave but this in the video wouldn't work bigger motors with a significant load on the motor .....hope that helps

  • @KoLuX57
    @KoLuX57 ปีที่แล้ว

    And if there is a hard drive with three wires, how to connect it?

  • @robsonnunes2033
    @robsonnunes2033 2 ปีที่แล้ว +1

    🇧🇷Here in Brazil. Very good your project. How many amps does it support, can it run a washer and dryer motor for testing?

    • @CreativeTechos
      @CreativeTechos  2 ปีที่แล้ว +3

      Thanks for watching, it will support upto 30A BLDC motors

    • @santimixsybr3831
      @santimixsybr3831 ปีที่แล้ว

      Can use that in 6leds BDLC motor?

  • @lelegokiltjchannel6561
    @lelegokiltjchannel6561 ปีที่แล้ว

    Good...

  • @dozzzer78
    @dozzzer78 ปีที่แล้ว

    hi...congratulations for the information provided... the information presented is very useful... my request for you... I have an electric scooter where the controller has broken... could you make a video on how to use this electric montage to replace the controller... and to be able to bring back to life my scooter...thx 🙂

  • @joaoqpapelaocoisavelhapidi6175
    @joaoqpapelaocoisavelhapidi6175 ปีที่แล้ว +4

    Joia legal gostei pra caramba bem simples

  • @GastonMojica-wk4wv
    @GastonMojica-wk4wv ปีที่แล้ว

    I need to adap to general compresor aire.... To work with solar panel😊

  • @luiscasadiegos9676
    @luiscasadiegos9676 2 ปีที่แล้ว +1

    BUEN DIA.....DIAGRAMA MOTOR BRUSHLES DLDC TRIFASICO DE 12 A 30 V ......MIL GRACIAS

    • @CreativeTechos
      @CreativeTechos  2 ปีที่แล้ว

      I'll soon upload 3phase delta version bldc circuit.

  • @abdullahbatis6780
    @abdullahbatis6780 ปีที่แล้ว

    is it a sensor or sensorless bldc motor?

  • @독연-x7f
    @독연-x7f ปีที่แล้ว +1

    4:10 도면

  • @boasnovasonline8764
    @boasnovasonline8764 2 ปีที่แล้ว

    Direct from Marituba, Pará Brazil thanks for the video, I would like to know if this controller is the battery or if it is connected directly to the electric grid? I would like you to make a 48 v14 Ah battery model is it possible? From also

  • @singingzone3056
    @singingzone3056 2 ปีที่แล้ว +2

    Can u make a mini drone at low cost using bldc motor or coreless motor??
    As online is costly..

  • @Dancopymus
    @Dancopymus ปีที่แล้ว

    Very good. The problem with this type of circuit is that every time you want to start the motor, you have to be pushing the motor and this devalues the project a lot. Would you have a more efficient way? Thank you

  • @babukartik6124
    @babukartik6124 2 ปีที่แล้ว +1

    BLDC motor me 3 wire hotaa haai. Ye 4th Yellow, kaahaanse aayaa? Jab ham BLDC motor banaayenge, 3 wire hi hogaa. To ye fourth point kaahaan se milegaa? Thodaa samjhaayenge?

    • @CreativeTechos
      @CreativeTechos  2 ปีที่แล้ว

      Thanks for your interest in the video, Actually in this video i used bldc motor from hard drive, with 4 wires.
      BLDC motor has usually 2 configurations
      DELTA with 3 phase wires, WYE with 3 phases but with common wire that is actually the point where all winding ends are connected together.

    • @babukartik6124
      @babukartik6124 2 ปีที่แล้ว

      @@CreativeTechos Thank you for your quick response. You are very kind. As I told you before, I have no knowledge on electronics. At the age of 70, if I try to learn also, I can't remember. So, I am trying to take the help of videos, made by people like you. Do you have any video on how to make BLDC motor at home?

  • @nicolasargen
    @nicolasargen 2 ปีที่แล้ว +1

    My motor only pruduce a "piiiiiiiiiiii" and doesnt work. any help?

    • @CreativeTechos
      @CreativeTechos  2 ปีที่แล้ว

      Which type of motor do you have?

    • @nicolasargen
      @nicolasargen 2 ปีที่แล้ว +1

      @@CreativeTechos 4 cables. I have a lot of a hardisk motors but same problem in all of them.

    • @CreativeTechos
      @CreativeTechos  2 ปีที่แล้ว

      I'll soon upload new circuit with best control without microcontroller

  • @thomaschristensen4281
    @thomaschristensen4281 ปีที่แล้ว +1

    All the blue are connected to heatsink :O

    • @CreativeTechos
      @CreativeTechos  ปีที่แล้ว +1

      It is not connected to heatsink, it is connected to drains of mosfets, Each mosfet is isolated from heatsink by using TO-220 silicone pads and plastic bushings.

  • @СергейБельский-г4ь
    @СергейБельский-г4ь ปีที่แล้ว

    Схема 4:10 🤗

  • @singingzone3056
    @singingzone3056 2 ปีที่แล้ว

    What about that spot welder as I had told u to make earlier...??

  • @rakadaslabelectronicsproje2300
    @rakadaslabelectronicsproje2300 2 ปีที่แล้ว +1

    At lease show the output what exactly you want to show .is bldc motor run in your video

    • @CreativeTechos
      @CreativeTechos  2 ปีที่แล้ว

      Yes, bldc can be driven using this circuit.

    • @CreativeTechos
      @CreativeTechos  2 ปีที่แล้ว

      I'm showing bldc motor is running using this circuit

  • @henryden6735
    @henryden6735 2 ปีที่แล้ว

    DC12-24V TO AC12-24V bạn có video hướng dẫn không..

  • @miahbangla
    @miahbangla 2 ปีที่แล้ว +1

    wait for another video!!!!

  • @isabellenivrose7133
    @isabellenivrose7133 2 ปีที่แล้ว

    Well work my friend , i have a question ? What is the frequency of this circuit please?

  • @mariosoares3035
    @mariosoares3035 ปีที่แล้ว

    Boa tarde Há tempos vi este seu video e comprei na JLCPB 5 placas e tenho dificuldade em saber onde se liga o positivo e o negativo. Tentei junto da empresa, mas não me souberam dizer nada, assim vinha pedir a sua ajuda se for possível. Desde já muito obrigado

  • @ngendokgaming3932
    @ngendokgaming3932 2 ปีที่แล้ว

    can be used for voltage 24v?

  • @akinnon2000
    @akinnon2000 7 หลายเดือนก่อน

    WHy say BLDC, since it's not DC ? If we have 3 phase motor it gotta be AC no ?

  • @khakirukaya4574
    @khakirukaya4574 2 ปีที่แล้ว +2

    👍👍👍👍

  • @EngrDan-wb5pe
    @EngrDan-wb5pe 2 ปีที่แล้ว +1

    Nice video, where the circuit diagram be downloaded??

    • @CreativeTechos
      @CreativeTechos  2 ปีที่แล้ว

      Circuit diagram download link in video description.

  • @pierpa_76pierpaolo
    @pierpa_76pierpaolo ปีที่แล้ว +2

    Amper max ?

  • @jallabalaraju6844
    @jallabalaraju6844 2 ปีที่แล้ว +1

    Please make pcb bord design pdf file... 480A ESC brushed motor 775 sir......

  • @azertaieb442
    @azertaieb442 ปีที่แล้ว

    Mabey if you can remplacing the resistor with a hall senssor ..and remplacing the variable resistor with other one that have open and close interne control ...here you will have a real speed controller ..it's will be confortable case for this project

  • @mahinuddinkhan1110
    @mahinuddinkhan1110 2 ปีที่แล้ว +1

    Nic

  • @Ezegechrist-oy9ux
    @Ezegechrist-oy9ux 5 หลายเดือนก่อน

    Please name the part
    Of making it

  • @architectureanddesignnu9231
    @architectureanddesignnu9231 ปีที่แล้ว

    But brushless motor for bike, schematic from brushless motor not run on most circuit.

  • @kaodesg3270
    @kaodesg3270 10 หลายเดือนก่อน

    But it dosent work with brushless motors with only 3 wires.

  • @Vladimir_Pyatkin
    @Vladimir_Pyatkin ปีที่แล้ว

    Does anyone explain why this circuit has no one capacitor?

  • @williampenaranda9572
    @williampenaranda9572 ปีที่แล้ว

    Gracias pero en inglés 😢se pierde la información

  • @thetrue1636
    @thetrue1636 ปีที่แล้ว

    where is another video ?

  • @tilen3266
    @tilen3266 ปีที่แล้ว

    bro fr felt the need to click bait it wow

  • @СерверОсманов-о6и
    @СерверОсманов-о6и 2 ปีที่แล้ว

    Кто знает, на квадрокоптер пойдет?

    • @John.Doe.2025
      @John.Doe.2025 ปีที่แล้ว

      Конечно! Можно даже два мотора паралелить к одному регулю.

  • @nguyentaniep5524
    @nguyentaniep5524 ปีที่แล้ว +1

    ok

    • @CreativeTechos
      @CreativeTechos  ปีที่แล้ว

      Thanks for watching my friend 🙂

  • @bigzakidsbangkae2827
    @bigzakidsbangkae2827 ปีที่แล้ว

    ไม่ได้เรื่องเสียเวลาดู