Honda Civic Si K20 to K24a SWAP DIY (2006 2011 Si)
ฝัง
- เผยแพร่เมื่อ 26 ส.ค. 2024
- Honda Civic Si K20 to K24a SWAP DIY 2006 2011 Si ... Explaining and showing you what sensors and accessories are needed for a k20 to k24 swap in an 8th gen si or rsx type s. Enjoy.
My Instagram: / gerb_productions
#hondacivic #civicsi #k24a
Good Job Gerb! You did a great job on that swap!
dont know if you guys cares but if you're stoned like me during the covid times then you can watch all the latest movies on InstaFlixxer. I've been streaming with my brother for the last couple of months :)
Good video brother.. Very informative for a lot of people to not just hear, but see all the sensors and parts that are needed and have to switched over.
Hey Gerb, don't get rid of the K20. Keep it for a future build buddy.
He should do a head swap with the k20!!
Hey gerb thanks for all your video just finished my k24a swap and running like a champ. I haven't gotten the flashpro but it's running like it should. That's for ur videos.
Np man, thanks for all your support 🙏🏼
Hii José, you are running the k24 on a civic Si not tunne?is running good and strong? I gonna make this swap i have a 2007 Si coupe, i dont have the money for the flash pro only for the k24 engine.. 🙂
@@LeandroGomes-sw3jz yeah Its been running good. Am saving up money for flash pro but haven't tuned it yet. It's been 11 month
And it still running strong
I just bought a 2007 si and has a bad k20. After watching this video I'm definitely buying the k24 it's cheaper then what I can find a k20 for.
dude, literally bought mine a week ago and mine blew on the drive home 😂 good luck brother, i know we both need it 😂🙏
@Gabriel Villalobos bought what a k24 and swapped it. Or a civic with the k20 and it blew?
@@BjYeager420 bought an si and it blew 😂 probably gonna go back to k20
@@cheesehandles k24 is cheaper
same here, i'm 2200 miles in and my mechanic found metal shavings in my oil and before that i thought i had a timing chain/tensioner issue due to my p1009 code
I just did a k24A swap on my 8th Gen just waiting on Flashpro. But the only sensor you have to change is the Crank sensor and the Vtec sensor behind the engine. Everything else just plug in and you can use the K24A crank pulley and need k20z3 oil pan and CRV post mount..but Everything else is direct plug in. All I'm waiting is for my Flashpro which is coming tomorrow brand new Bluetooth.
So nothing need to be transfer just a few things
You are a godsend I bought a jdm k24a not knowing about the water pump housing so I was about to lose it trying to figure out the pulley situation. Your video is very informative, thank you so much
Glad I could help
Hmo K24a comes in tomorrow for me. Very helpful video answered a lot of my questions thank you Gerb 👍
HMO is the shit! I’ve heard nothing but great reviews about them. Glad I can help you out. Now go do your swap 🤣🙏🏼
Overheated my 06 si doing a k24 swap thanks for the vid really helpful
Glad I could help
My current project right now, thank you for the advice , def very helpful. I got k24A RBB motor recently after my k20z3 made it to 230k miles before head gasket blew.
This is really really good info. I just keep watching this over n over. Thank you dude.
My k24a coils worked in my z3 just an fyi for anyone wondering they are interchangeable
Luv this vid my favorite line is learn something through a lens ! Thanks for the info bro !!! Share the knowledge!!
More to come eventually
The most helpful video ever. Thank you so much bc im doing the exact same thing rn. Awesome help
Glad I can help you out 🙏🏼
This was a very helpful video. I'm looking at buying a 07 si with k24a swope done allready.
Thanks for this video, in the middle of doing my engine swap and im doing full k24 with the z3 oil pan. Sorry about midnight I hope your next project works out well
Thanks for the support! It is time to focus on the clean fg2
This was actually very helpful. I'm currently looking to give new life to my 8th gen Si.
Glad it helped you out. Not a lot of vids out there, so I figured why not make a series
Gerb thank you so much for making these videos You’ve helped so much couldn’t thank you enough 💪🏽💪🏽💪🏽💪🏽💪🏽
Thanks for this video. I'm planning on finding a 06 -11 Civic Si and doing this swap.
gotta admire the gerb, this guy has been goin at it day in day out. nice vid man. i used to have built k20z3 head/stock k24a2 block 8th gen sedan
evan_n I am currently doing this to my 8th gen coupe!
Appreciate the kind words and I’m glad you see the hustle 🙏🏼.
the fact you have this guide is amazing
great video
Thanks man.. wait until it’s time to turbo
Appreciate the help! super familiar with B series and just got k series. I have a k20a2 thats just head to pan. Also have a element and was wondering how much stuff i could take from the k24 over to k20. This video helped. Thanks
May I ask where did you get your base map?
You can run the car with out the oil cooler just get the tsx water pump ,, for those on 2024 make swap 💯
You got to put that k20 head on the k24. Huge power gains
I am going to in the near future bro 🤙🏼
Build looks nice! I'm doing wiring on my K24 CRX.
Good stuff… I want an older Honda chassis
@@TheGerbsteve th-cam.com/video/jS4qwUfMPRw/w-d-xo.html
Kind of an older video of mine. She's a lot further along. I just need exhaust and some various hoses or problems that I'm sure will arise 😆
I swapped my k20z3 to a K24A and it ran on its own for 15 or so seconds and cut the engine cut out now it won't start. Fuel is coming out of the fuel line and the engine has healthy compression on all four cylinders. I need to do a spark test. I was wondering if you encountered any of these issues. P.S. you're videos were a huge help when I was debating if I was going to perform the swap.
This is fire 🔥, me and my 14 year old son are getting ready to do this swap
You guys are going to kill it 🤙🏼🙏🏼
Yesss I’m finally going k24a2 on my fg2😭🙌
Great video man! Trying to build my confidence to do the swap. Im ready to hit the buy it now option. Only thing stopping me is having my daily down for a couple days. My base rsx really needs a pick me up. Ive got fbo and ktuner. Have everything to do the swap except the swap itself. Real nail biter. Great videos tho!
Go for it, it's not too bad. I know the feeling, I need to buy a new daily. The k24 in the rsx will be worth it, trust me. good luck
Dude, in the beginning I thought you were reaching for a Faygo orange. That's my fav orange pop. ✌
Hey gerb gonna do a 2004 k24a swap to my 08 si Civic 2dr and this vid really helped
It is a very rewarding swap! Best of luck
Thanks brother ! Down here in ma been watching you for a min seen you around providence a couple times to loll but quick question you didn’t have to change your Ecu right ?
The vtec solenoid from k24 only has 1 plug cause the jdm motor doesn't use an oil pressure switch for vtec iirc. A usdm k24 would have both plugs I think.
Might hit you up when I get closer to to doing mine. Built k24 is definitely next.
Thanks for the video literally about to do this
Good video my k24a2 has most of the questions answered. But for the computer..... No idea.
What year crv post mount will I be needing?
04-08
Thanks for the video about to do this now
hey man do you have to swap the oil pump to fit the pan or does it work fine?
Nice job! i want swap my usual civic FD7 whith R18A2 to K24A3. Salute from Russia.
I love your videos bro. Thanks for the content.
My boi keep doing your thing very good video 💯🙏😎perfect info
Did you have to tune the car in order for the k24 motor to work
No as long as you are keeping it close to stock (no cams, big injectors, etc)
Hey Gerb I have a question. does the factory ecu of the fg2 work with the k24a or is the FlashPro a must for it to be drivable?
I bought NGk coil pack from TSX u think they will fit on 8th gen civic si plug wiring harness the part number changes 48699 and k20z3 NGk coil pack part number is 48922
do you have to buy flashpro for the tsx or can you use the one for the fg2 once k24 swap?
Also, ABSOLUTELY throw that z3 oil cooler on if you're doing that swap!
Hey Gerb I am helping my friend with a K2.4 swap on an Acura CSX 2010 same as the civic 2010 can we pull the engine & transmission from the top rather than taking the subframe from the bottom & removing it from under the car
Hey @Gerb, great video, if I'm JDM K24a swapping my 7th gen, coming from a d17, do I still need to swap all the sensors for it to fit with a USDM 02-04 rsx type s harness?? 🤔💯
What year in specific for the crv post mount
Thanks for the info bro really helped me out
My Acura CSX engine blew up I bought the tax K2.4A2 engine it is a little taller (19 mm / 0.748inches)than the k2.0 can I use the TSX intake& exhaust manifolds & would it fit
Hey Ferb my car is a daily driven all that is available now is the TSX K2.4A2 the guy it would fit I saw you swap all the sensors just wanted to know could I use the TSX intake and exhaust manifolds
So i have a 05 rsx with the k20z1 and I’m gonna have to order a new harness but eventually I wanna go k24 bottom so if I swap the sensors n all will it work with my ktuner ecu or would I need hondata?
Should work with your k tuner
thanks bro pulling motor like my 3rd time thinking about k24 soon not sure yet tho
Go k24
What’s up man. So I just got a k24a2. Doing a 20/24 but I’m getting conflicting information on something. With the z3 pan on the 24 block what oil pump and pick up are you running? Did you have to use the z3 oil pick up? Thanks man!
the best stock oil pump for your application is the fd2 type R oil pump. it has the extended pickup just like the stock z3 oil pump but is closer in design to the k20a2 rsx type s pump. do not use the type s pump because the pickup is not tall enough for the deeper z3 oil pan. its not worth the risk. use the RRC fd2 civic type r pump. its cheap and bolts right up.
In the middle of doing my swap, and I noticed that the k24a block has studs for the oil pan. How did you remove this?? I didn’t see it in the video and I’m stuck now as to how to remove it safely
I recently bought a fa5 with a k24A and I want to change the spark plugs but idk what car to buy them for, can you help me out? Thanks!
Hey question is this swap worth it .. is this noticeable power ? I’m running stock k20z3 with bolts ons and honestly I’m happy with it I just want to know if a swap like this is really worth it power wise
My thoughts exactly.. great video 11:03
🙏🏼
Wouldn't I need a new ecu and wiring harness or a retuned?
Hey I was just wondering with the side motor mount you need a 2002 to 2006 CRV post mount but what else do you need do you need the whole motor mount assembly from the CRV or just the post mount
I’m having trouble putting in my k20z3 trans into my k24A do know any trick to it ?
Hello! How many liters of oil did you use with z3 oil pan?
Hey Gerb I swap the K2.0Z2 from my Acura csx with K2.4A2 TSX I am keeping the OEM air box what hose to use from the air box to the K2.4 intake manifold can you send me a picture or the part number
Hi buddy I’m I have a Honda Civic 2007 1.8L I’m planning to swap k24 can I used the harness and old stock manual transmission?thanks
Did you need to flash tune your ECU on k24 after you installed everything ? I heard it’s necessary to do a tune to make the k24A swap run as it should.
Yes it is
I read the that you can pin it to about 45 degree I am in Canada do you know if that can be done and is it safe to do so
What bolts did u use for the crv post mount? And are you using the torque mount that was used in the k20?
Hello, what oil bayonet did you use? Does the oil level stay the same?
Called a dipstick, keep the k24 oil dipstick
Do i have to change the mounts or mount locations at all?
How do you deal with the immobizer
I recently bought a civic that had the k24a2 swap. It has the skunk 2 headers on it but slap the firewall hard. what did you do for the clearance issues?
he put spacers on the rear lower mount t😁
basically let’s the engine move forward up with the spacers and let’s the header clear better
Brother..did you use the same bolts from the z3 to mount the CRV post mount or are they different? Bolts?
what did u use to remove the k24a oilt filter thread bolt?
Helloo gerb bro, I want to ask u that what is the difference between k24a rbb2 engine, and k24 rbb 3 engine. Like u have rbb 1, whats the basic difference between rbb1, rbb2 and rbb 3.
I am looking to do the same on a 07 civic si. Its hard to find another z3 since my brother spun the rods so im looking for the k24a. Could i use the same ECU and transmission from the k20?
Pier B nice man. It definitely is hard to find a clean z3 engine. If you do find a nicer k20z3, you’ll be paying top dollar for it too! Yup, you can run k24 off of k20 ecu and tranny
Gerb I appreciate that man! One mor thing, the k24 redline stops at 7 and k24 at 8. How do you go about that? 7 would be my new top?
Gerb How does that work about the 7 top rpm on the new k24. Thanks man
What year of crv did u get that post mount bracket off of
You give me inspiration
Thanks for the video bro! quick question did you have to replace your k20 ECU to k24 ECU?
I kept k20 ecu
@@TheGerbsteve thanks for your reply bro
Would this work for a base rsx k20a3 swap to k24?
I’m pretty sure you can run k20a3 ecu, trans, and some stuff. You have to look more into it though man, don’t want to get your hopes up
Can I k24 swap my 1.8l 2010 civic
Google search didn't help. If we have a 8th gen Si, will the stock ECU work? What type of tune is needed? If stock ECU is needed, thinking of using two ECUs so I can pass CA smog. One with a tune, and the original one for passing smog.
Stock ecu works and a tune for k24
@@TheGerbstevecan you elaborate on this gerb? Will the z3 base map run the car and pass smog? Or did you have to flash the 24base?
Gerb, how much hp you think your making right now? Love your videos bro, keep on filming
Hard to say, maybe 210 hp or so. More videos to come for you my friend
will my k20z3 ac compressor fit the k24???
Yes
From what year i need the crv post mount
i think the 3rd gens
Which k24 did you use boss. The k24a2? Anything you thought of after this video? I want to do this bad !!!! Thanks for the content. Did you do the oil pump upgrade I believe that gives you more power.
K24a. I like the torque. And I didn’t use the pump, but regret it seeing as I only take it to 7800 rpm
@@TheGerbsteve I just watched your other videos. I saw k24a. I'm doing a marathon of your vidz right now lol. Prepare for the storm. 7800 is still great. I bet the torque feels bomb💣
188tq and 7800rpm feels great for a first k24 swap to me ! 💪🏼
Hey bro so I have a bit of a problem maybe you can help. I did a k24a JDM swap on my fg2. I did the type s oil pump upgrade. But like you mentioned the type-s pan doesn’t have where to Bolt the rear mount. What do I do? Can I use the z3 pan orrr? Thanks for the reply in advance.
@@krazykk4 awesome thanks man!
@@krazykk4 another question bro. Finally addressing the issue tomorrow. What header are you running?
@@krazykk4 thanks for the reply again. Awesome I’ll have to pick up a set. No cutting necessary right? Headers have clearance between them and the rear mount bracket?
Hi I will be doing a kfrank like urs too if im not wrong I can reuse my k20z3 mounts on the k24a2 engine?
You sure can 🤙🏼
I need to order a clutch kit today and need to know for which car do I buy the clutch kit for
if you have the K20z3 or K2, 4A/A2 you can use the oem civic si clutch
Thanks for a very helpful videos... I have a question, Did you use RBC VTC 50" ?
I sure did. It’s one of my favorite mods
@@TheGerbsteve whats the benefit of using the rbc vtc 50° compared to the stock one in k24a2?
Hey quick question i just did the same swap on my fg2 & the car doesnt drive in any gear. The car only drives in neutral… super weird & gears are super hard
You may need to install new clutch
Thank you man !
Hey Gerb can I use the 50 degree intake camshaft in a K2.4A2 with out any valve to piston damages
You’ll be able to run 50 vtc, but I’d have your tuner set it lower just to be safe.
Thank you for the help
Hey gerb can i use my skunk2 alpha header to k24a engine swap?
Yes you can. Just need to find out how many washers you need to use
Gerb how many washers did you use?
Is it ok to use 93 instead of 91 fuel in the 8th gen si
Yes its ok
Hey Gwen if I use tge OEM aluminum oil pan how much oil I have to put in the engine
Hey Gerb K2.4A2 swap in an Acura CSX OEM same as the Honda si aluminum oil pan how much oil to put with out over filing
Hey. I just found out on my 06 si k24a2 swap from 06 tsx . Im running the stock ecu on the k24. Can it ruin my engine? The car is still fast.
nope use your stock ecu if your in an 8th gen
@@semaJPlayz
Oh ok. Thank you. So, just use flashpro?
@@rapture7551 I wana swap my 07 si with k24. How is it running in stock ecu
Brother I’m doing the same swap in my 09 si where’d you get the top mount
Someone actually sent it to me man. CRV post mount
Hi Gerb good job on your swap!! I want to do the same just wondering what’s the price range just to get it running .any help would be appreciated thanks!!
I spend like $2,000. I still need to make a video on how much it cost me
@@TheGerbsteve Does that number already included with overhauling the k24a internal?