Good call on the line fittings. Should run cool all day with that 454 rad in it. I got an all aluminum race radiator in my Jeep, in the winter time I'm lucky to get cool air out the heater, LOL. Plus I had to make the trans cooler because my radiator was for a Bronco with a manual trans. Works OK I guess, well, never had a problem with trans, the lines are a different story, you know, "Retighten your hose clamps" lol.
Nice build and work area. I'm working out of a 2 car garage with no ac. most of the time I have to back my truck out at least a few feet to get a good area to work in.
Yeah I hear ya. If u look back at some of my first TH-cam videos have will see I used to work out of a small building like a 10x12 or so. Looking back now I ask myself how I ever managed lol
Yo bro I’m having a problem trying to figure out what wire is what coming out of the bull head 1987 k5 blazer any help you can give I can send pics of what I got…love the vids
nice video man,im going to get a 64 c10 and put a Ls but i dont know what trans im going to put in it,im also going to put air suspension because i will have a motorcycle in the bed and haul a travel trailer
Got a question I have an 84 c10 stepside im doing a swap in my donor vehicle is a 03 Yukon xl if I were to use the Tejas steel mounts does The driveshaft length change and if it does what’s the new length
I'm in the same shoes with same donor. You will have to physically measure your drive shaft with motor and trans sitting in place. My adapters are from Tejas as well and they are a different design than his. Like a gen 2 or something. I bought mine about the time you posted this and am curious if yours are the adapters like his or are the bolt on replacement clamshell like mine?
I have a 2984 c10 pickup and have a light weight green wire and don't know where it goes? It's not a hefty wire, it's a lighter wire . It is hanging off of the engine compartment. I would like to know where it goes? Jerry
Are the transmission cooler lines the same for a 700r4 as a th350 on a 2wd c10? What part number can be used to find transmission cooler lines for the th700r4 lines for a 2wd c10. i tried to look it up on LMC no success.
Nice job on your chevy man Man i have a cuestion for you I am doing a swap And am gonna a use 4L60 transs But I am gonna use a unmodifiques harness My cuestion is "i have too do something on my harness for the transs WORKS or just plug it in ??
I only gave $5 for these and they are the correct ones for the lines and fit the trans also. The 4L60e trans is just an updated version of the 700r4 so the fittings swapped nicely.
Lonnie's the best !! on giving you info on your C10 ls build. Me watching his videos helped me so much on my build .
Honestly your videos have supplied me today with more info than I could find in 3 days of looking. Step by step man I love these. Keep it up👍
Good call on the line fittings. Should run cool all day with that 454 rad in it. I got an all aluminum race radiator in my Jeep, in the winter time I'm lucky to get cool air out the heater, LOL. Plus I had to make the trans cooler because my radiator was for a Bronco with a manual trans. Works OK I guess, well, never had a problem with trans, the lines are a different story, you know, "Retighten your hose clamps" lol.
another excellent video with great amount of helpful detail, waiting on Part 9 please
Cool bro thanks for spreading you know how I'll be waiting on the gauge video. God bless
Nice build and work area. I'm working out of a 2 car garage with no ac. most of the time I have to back my truck out at least a few feet to get a good area to work in.
Yeah I hear ya. If u look back at some of my first TH-cam videos have will see I used to work out of a small building like a 10x12 or so. Looking back now I ask myself how I ever managed lol
Great info staring my ls swap in my 81 soon any part number on the radiator or what year I should look for I’m also doing the 5.3 4l60e
I've got a full parts list on my Facebook page All Around Kustoms
Yo bro I’m having a problem trying to figure out what wire is what coming out of the bull head 1987 k5 blazer any help you can give I can send pics of what I got…love the vids
Ive got a video covering that
nice video man,im going to get a 64 c10 and put a Ls but i dont know what trans im going to put in it,im also going to put air suspension because i will have a motorcycle in the bed and haul a travel trailer
Got a question I have an 84 c10 stepside im doing a swap in my donor vehicle is a 03 Yukon xl if I were to use the Tejas steel mounts does The driveshaft length change and if it does what’s the new length
I'm in the same shoes with same donor. You will have to physically measure your drive shaft with motor and trans sitting in place. My adapters are from Tejas as well and they are a different design than his. Like a gen 2 or something. I bought mine about the time you posted this and am curious if yours are the adapters like his or are the bolt on replacement clamshell like mine?
I have a 2984 c10 pickup and have a light weight green wire and don't know where it goes? It's not a hefty wire, it's a lighter wire . It is hanging off of the engine compartment. I would like to know where it goes? Jerry
Are the transmission cooler lines the same for a 700r4 as a th350 on a 2wd c10? What part number can be used to find transmission cooler lines for the th700r4 lines for a 2wd c10. i tried to look it up on LMC no success.
I'm not sure. I just used what I had and it worked out for me.
ill just look for some 1984 c10 2wd th700 lines then. i managed to break one of my th350 lines anyway during the trans removal. thanks.
Yes I use them on my
thanks, my general feeling was that they would be the same but i couldn't find any confirmation.
Nice job on your chevy man
Man i have a cuestion for you
I am doing a swap
And am gonna a use 4L60 transs
But
I am gonna use a unmodifiques harness
My cuestion is "i have too do something on my harness for the transs WORKS or just plug it in ??
Benjamin Gomez serna I have the same setup here. It's a 5.3 with a 4L60e trans. When you redo the harness the trans plug with stay in the harness
PuppetKicker The Manic Mechanic yeah i have a complet harness they have the plugs. I thake out averething of the same truck
Hey friend , did you make any changes to the rear end?
Nice shop brother great potential
There's was a check valve on my 93 radiator burned up my transmission
Do u have video. The exhaust set up
Did the 700r4 driveshaft work??
I had a drive shaft cut down and balanced for this swap and the 4x4 swap I'm currently building. 4" aluminum drive shaft
I just checked out your Facebook and sent you a friend request, your holding out on us, your doing a burnout in the Facebook profile picture, lol
Yeah lol
What did you do for your driveshaft
Used one from a 90s suburban. Had it cut down to size and balanced
How did u mount up the shifter columm?
edgar becerra stock. I just moved the bracket that is on the frame forward one hole and slid the jam nut that is on the shifter linkage
Do you know if this will work for a 4l80e?
MerkRider I'm not sure to be honest. I know the 4L60e trans is the same as a 700r4
hey bro what driveshaft did you use with the tejas mounts?
kike ramon I have been told a 98 model or so 2 wheel drive explore shaft would fit.
how much was it by any chance? thx for the quick reply ive been following your build
do you know what deiveshaft did you use? i have a chance to get a auto gto driveshaft trying to see if it will work for me...
thx bro loving your vids keepn coming
what adapter plates do you use
Moises Delatorre Tejas Steel Works. Look them up on Facebook
what year is the 4L60e are you using
Sal Benz 2002
Lonnie what headers did you use?
I used hooker cast-iron manifolds on this build. On my K10 that I'm currently building I'm using speed engineering 1 7/8 long tube headers.
@@LonniesGarage I thought I saw the hookers! I have a set going on my ls I'm putting in my 87 Suburban
your videos are a big help.
Awesome video...Keep up the good work..
speedway motors has adapter fittings for you trans
I only gave $5 for these and they are the correct ones for the lines and fit the trans also. The 4L60e trans is just an updated version of the 700r4 so the fittings swapped nicely.
do have an extra harness
Not at the moment
nice shop.
do have an extra harness