RV Toilet Ball Valve Seal Replacement
ฝัง
- เผยแพร่เมื่อ 10 ก.ย. 2024
- Today I am showing you the steps to work through if you find that your RV toilet isn't holding water in the bowl or the water is leaking out of the bowl. This particular flush ball seal fits the Dometic 300, 310 and 320.
The Dometic flush ball seal part number is 385311658 and is available on Amazon here: www.amazon.com...
One of the best straight forward how to videos. Thank you!
WOW!! Thanks for that comment!
The valve seal on our Dometic toilet went bad and needed to be fixed. THIS VIDEO gave me perfect instructions on how to fix it. We are newbies and, although I can figure out most things, RV toilet repair is not one of them. I got the part from a local store, watched the video 5 or 6 times to make sure I didn't miss anything, and got the job done on the first try. My wife is sooooooooooo happy with me. No more horrible odors and she can use her own toilet instead of the public one. Today, I'm her hero. THANK YOU SO MUCH.
Steve Tait stick with it and you will be a pro at this stuff. My calendar keeps me on auto pilot as far as maintenance goes so most problems are taken care of before they become an issue.
WOW! This saved the day! My husband was convinced I broke the toilet $$$...I secretly ordered the seal and voila---water is holding. Lifesaver!
Monica Martin FYI you likely don’t have to replace the seal just clean it and the valve plate that seals against it. I had to do that to mine yesterday. Just scrubbing it with a toilet brush isn’t enough. You have to remove the seal to get to the dirty spots.
@@JustPlainCommonSense I replaced it - the old one was sort of dry rotted and not soft and pliable so I think a new one was just the ticket! Thanks!!
Your idea of leaving the slide ball closed while installing was great! I've watched 2 or 3 others videos on this subject and nobody else mentioned living the slide closed! Thank you so much! Subscribed ....
Awesome, thank you!
Very thankful that you took the time to post this video. Our camper toilet wasn’t holding water and instead of having to replace the seal, it just needed a good cleaning and some lubricant. Thanks!
MackAttack !! I’m glad it was so simple to repair. Thanks for watching!
Excellent, simple, concise “how to” video! My first two pre-video tries were unsuccessful. After checking out a couple of other long-winded dudes who droned on about everything except how to replace the seal and then I found this video which got right down to business. Next try went perfectly. Thank you!!
Thanks for that glowing comment! Glad it helped you out.
Nicely done Brudda. Great description and demonstration. Thank you for taking the time and sharing this with us.
Thank you for the comment!
Waiting on my seal to arrive.... can’t wait to install it ! Thanks great video
I'll be doing a review video very soon comparing the Dometic seal against the Rhino Storm seal at half the price. I have to replace my seal about every 24 months of full-time RV living. Thanks for the view and comment!
Great video. Saw others that took the whole toilet out. Saved me a bunch of time.
Holy Smokes that Would be a waste of time!!
works and looks wonderful
Thank you.
Best video on lube and replace gasket
Cleaning took longest time
Remove, clean,lubricate and replace 5 minutes - thanks
I get hard water scale buildup on the underside of the seal that has to be removed periodically. Thanks for the comment!
Thanks for the video, i never thought I'd find a how to on replacing the ball valve seal. Very helpful video saved me time trying to figure it out, i was about to start tearing into the toilet lol
Thomas Gibson don’t forget the gloves 🤣
Good luck on the repair!
Thanks my friend , great video !
Thank you too!
Great instructions. Very, very easy fix. Thanks!
You're very Welcome. Glad it helped!
Great tip and instruction, always use your gloved hand 😁
Rusty Glovebox Not finger lickin good!
Good job thx
Good install! Perfect instructions.
Thank you for the comment!
Just found your channel, great info on everything I have watched so far.
Thanks Craig. Glad to help out.
I appreciate your video, got my new gasket and magic lube ready to go. Super flushed black tank, water off etc. You say “it’s real easy, just reach in and grab the seal” ......... we’ll, no matter how I position my hand and/or fingers, I can’t seen to get a sufficient grasp on the edges of the seal to get enough grip to remove it. Please advise your thoughts and suggestions. Much thanks!
Don't use the magic lube on any part that the ball has to slide on. It is too sticky. Better yet, you don't have to use it at all, just clean all the surfaces really well.
Yes. Thank you, this worked!
Glad it helped! I just had to replace mine as well. Apparently I am going to consume one seal every two years..
Thank you great job.
It appears to be something that will need to be replaced every 24 months with my water quality. Thanks!
@@JustPlainCommonSense Us as well, now that I know how to do it the right way. thank you
I found that clea one the bottom of the seal will work wonders for keeping water in the toilet.
No doubt! I brush down under the seal frequently but somehow that hard calcium deposits on the rubber and slide plate. Seems I have to replace mine every 24 months regardless when living in the RV full-time.
Thanks for the video. Quick question if you can help...when I press the foot pedal all of the way down the toilet works great. When I push it partially down to put water in the bowl, I get leakage out of the foot pedal? I can’t figure out why. Would you have any ideas? Thanks again.
Ron Ervin I’ve never had that problem but I’d start by turning the water off and taking the valve off to see what is wrong. It may have a seal that is out of place or a crack in the body somewhere. Really hard to tell
What the heck dude?!!
That...was....WAY...too simple.
If I have to change ours and it goes that smoothly I may sh*t myself as that would be the very first repair that went just as I would have wanted it too.
HAHAHAHA..............;)
It gets replaced about every two years. That is about as long as the rubber will last before it begins to leak. Good luck on your repair.
Can you buy the little clips that the springs of the light click on to?
I apologize, but I'm not sure what you are asking me. Is there something in the video you are asking about?
Why is it never that gross when your working on your own toilet? I could never be a plumber and work on other people’s “candy bar” receptacles.
BCtruck, rebuild, repair,repurpose I totally agree!!
What if the ball valve is sticking, on a model 310?
Traveling Terry turn off the water supply and remove the ball valve seal on the toilet. see if a lip has rolled on it. With the seal removed, see if the valve still sticks. If it does not stick then I’d say the seal was the problem. Maybe you need to replace it. If it still sticks I suppose the valve is defective.
@@JustPlainCommonSense yea, I've done all that and lubed with plumbers grease as well, and we'll see how long it holds up. I don't think I can replace the ball valve, so may have to replace the whole toilet....Thanks...
Did I miss what you used to lubricate the seal?
Peg & Ron LaMascus you sure did. I showed it at 1:55
Just Plain Common Sense
Thank you!
15 ppl gave a thumbs down.
Why
It’s all some people live for! They have No Life!🤣
It's not an option video. It's instructional.
Very odd.
Don’t drop that brush inside the tank lol!
That might make for a LONG day