Ford Mondeo Mk5 Rear Wheel Bearing PLUS 10K SUB'S THANX
ฝัง
- เผยแพร่เมื่อ 8 มิ.ย. 2024
- Ford Mondeo Mk5 Rear Wheel Bearing PLUS 10K SUB'S THANX
removing the rear wheel bearing on a mk5 ford mondeo used lower arm and hub assembly purchased from the scrap yard - ยานยนต์และพาหนะ
10,000 of us tuned in to your humour, amazing skills and knowledge Alan 👍🏻 oh and a little bit of Miss M 🤪
cheers😜
This is a great channel, with humour, knowledge and Miss M, and you fully deserve the gratitude that we have for your videos👍
Congrats and keep up the great work👍👍
On my 2008 Ford Mondeo I have had to replace both rear bearings. So I was surprised to hear you say in your experience that you had never had to replace any. There was an interval of about two years when the second bearing had to be replaced. You are right about cost of spares as here in Ireland we have 23% VAT on almost everything which makes buying spares from Ford ver expensive. You are right also about the noise coming from worn bearings as I could not wait to get this problem repaired. Love your site as with 320,000kms on my car I look up your site for information every time.
Happy 10k subs, well done Alan and the team (Monica), Thank Christ they put bolts on the rear hub!!, instead of those cap head torx bolts on the mk4...., Keep posting Alan love the videos.....
thank you 😃
Doing rear hubs in a few weeks. Your videos are amazing xx
Good luck!!😊
I like watching your vids, and I haven't even got a Mondeo. Congrats!
lol thank you
I'll second that! I thoroughly enjoy your channel..!
Nice one Alan helped me out with so many of my fords and Volvos with your videos
Can't wait to get back into my next Mondeo been using them for 12yrs now! 👍👍👍👍
Thank you Alan and Monica you two always make great video,,, Good luck for the quick 100k
thank you😜
Don't own a Mondeo but have driven a few over the years. My fave being the MK3 Mondeo. I think they've aged beautifully, seem to be reasonably resistant to rust, and the 2.0 TDCI felt like a rocket ship, the amount of torque from low revs and the effortless cruising speeds. You can see why they were so popular. With the quality and content of your videos, I'm sure 20k subscribers, won't take long!
Allen
Monica loves doing these videos with u mate she smiles you make her laugh too we will after call u cool dude
Phil in stoke
Helped me loads much appreciated you deserve the credit
Great video and of course the very beautiful Miss M ....
thank you
Brilliant content!
I’ve had to have all of them replaced. Front 2 went at about 70k and rears both gone at 85k
Always fantastic watching Alan teasing Monica 🤣🤣 And congratulations on 10,000 subs 👍🏻
cheers
WHERE HAVE YOU BEEN MATE ????? KEEP EM COMING
life gets in the way
Congrats on your 10K subscribers. I am not a mechanic, but do work on cars occasionally. It's a good job you don't work on Toyota Prius hub bearings. The front ones are hard to remove, due to galvanic corrosion. I did a friends wheel bearing last week and used a sledge hammer with iron ingot as a drift. Laying the hub carrier on a metal support on the ground, it took only a few hefty blows with the sledge hammer to remove the bearing. I have a 10 ton press but could not bring it with me. Plus the previous time I tried to use the press on the other bearing, it didn't budge. Same with a garage 20 ton press!
I learnt the disc removal technique using a bolt, a long time ago. Never fails.
I watch a lot of mechanic videos, and your is entertaining as well as educational. Make of car does not matter as some parts are similar in design.
Keep the videos coming. 👍👍
cheers for that info
Congratulations on 10k subscribers 🍺 I tune for every video, here's to 20k subscribers!
thank you
After watching all these videos I would consider buying a Mk5 Mondeo. Congratulations on hitting 10k subs.
Worth your weight in gold guys , thankyou 🤜🏽🤛🏽
Jamie a Taxi Driver from Inverness with mk 5 mondeo 👏🏽
thank you 😜
Congratulations!
thank you
Long time no see. 😊👌
Well done Alan. Thanks and I wish You at least next 10000 subs.
thank you
Well done amigo!! Great videos!!
thank you
Im just here because Im crazy enough to have a Mondeo Mk 5 diesel :-)
lol
Me too.
Well done keep up the vlogs
Love you mate! keep up the good work!!
Hey people, good job, lot of fun and info. A hodne zdaru Monice, at se dari.
Congrats bud, keep it up!
thank you
Nice work
Could do a vid giving your unique opinion on the different Monadeo engines types/sizes? Really appreciate your vids!
I love love you videos.
cheers😜
What a conicidence! You know, I was just thinking about replacing the rear wheel bearings on my Volvo C30 just yesterday, since I'll be down there replacing the disks, pads, and the dust cover (which quite literally disintegrated when I was washing the alloys with my flexible toilet brush). The bearings need to come off to replace the dust covers. They're only £50 or so a pop, and the old ones might be tired after 115k or so miles.
Those flexible toilet brushes have got a lot to answer to.
lol
@Kris Nicholson The abs sensors are actually integrated into the bearing, so you get a new sensor with the bearing. But I'll leave them for now
Just keep the video's coming there helpful funny and your welcome on my screen anytime thanks
thank you
Another excellent vid.....
thank you😜
Well done ✅ 10k.
thank you
Er, I think you will find that ~250k miles is only one way to the moon... or back! ha! anyway, seriously, cheers for the videos they are super helpful and congrats on 10k.
lol thanks for the moon info and thanks for your comment
I replaced both my rear bearings on my 2009 Mondeo at 100k miles. Used cheap aftermarket eBay ones. Big mistake. Have had to replace both again after less than 10,000 miles
Good morning. 😊
good morning lol
Tell Monica some guy named fernando from Florida USA said HI!!! 😃
Does it matter what side you replace it with? Meaning can you use a used bearing that came off the left side and put it on the right side?
I have a mondeo ambiente 2l tdi 2009 titanium mondel type combi...front steering rack was reconditioned. I was told then mcfearson was gone and needs replacing. So I did that..Now he says the shock absorber need to be replaced in future..so I can drive.. but man..I watched your video on mcfearson..after steering rack was reconditioned now the mcfearson problem sounds exactly as it did before steering rack was done....was I done..thats my question.. Paul, Irish guy, living in Poland.. love your videos..wish I could give you my mondeo so inwould know it actually is fixed this time..
My 2017 rear offside wheel bearing needed replacement at 25000 kms (Australia).
Sounded like an Apache helicopter.
sounds like it was faulty from new to fail at that mileage but thanks for letting us know...you are at this moment the only person to have replaced a rear bearing
my 2015 with 64000mls rear passenger side is getting a new bearing this weekend
I have Galaxy 2013year WA6 similar platform and same type bearings. At 146K one rear bearing went. Maybe heavier car or the fact is taxi and does city miles or something ? I had one replaced at Ford for nearly £300. Now at 151K other side rear bearing went. Time to follow your tips and do it myself. Hope my Delphi scanner will wind calipers back tho :)
It’s Alan 👍👍👍🏴
hello😜
Alan Howatt I have to admit. I fell asleep through the first viewing. But I eatchef this morning 😁
Glen here I'm driving a mk5 mondeo 2015 as a taxi in Dublin I have a chirping or squeak on the rear passenger side from cold it takes 20 mins before it starts chirping I've replaced disk pad and shock its still the same noise..it attracts attention everyday..im going mad..
this video might help. th-cam.com/video/n80bEGEoAuQ/w-d-xo.html
Yea I'm replaced that arm as well general thinking on it is rear wheel bearing causing the chirping as the bushings are new I donno
Great work. Does the 2013 mondeo rear brakes caiper wind back as normal, or is like the mrk5 for maintenance mode. Thanks
hi mack, yes you will have to wind the rear calliper piston on a 2013 mondeo back in as normal
@@alan4x thanks so much
Hey alan congrats on the 10000!!😄😄 as for doing a video on mondeo's that havent been seen how about doing a video on changing the power steering fluid on a mk4 mondeo? mine has red in it instead of green it should have and can find a video anywhere shown it done on a mk4!!😒
that has been on my list when the right car comes along but if you have red you really need to replace it with the green hydraulic fluid
Thanks mate yeah i know hopefully a video will come up for it soon so i can do it 😄 or have u any suggestions how i should go about changing it?🤔
I drive an old Ford Mondeo St220 (build in 2002!) and it really looks much better than your MK5 all the way ! BTW I love your hard slang LOL! Best regards from good old germany :-) don't you have any rust solver or grease in GB ?? to make the screws going easyer ??
Well done, now you can ask TH-cam for a Silver play button !
How about a recall video covering the items that the mk5 has been recalled for, the latest one is a battery sensor corrosion issue ? Do all the cars go back to ford of do they issue you with a van load of the parts when there is a recall ?
i will look into it but i have received zero recalls
@@alan4x I have had 3 recalls on my 16 plate diesel, a clip on the fuel line, software for more bells and whistles when the engine overheats due to low coolant, and the battery sensor one.
Potential leakage of battery acid around the battery negative terminal could cause the battery monitoring sensor to fail. Over time growth of copper sulphate may accumulate. This, in turn, could provide a conductive layer underneath the Battery Monitoring Sensor, creating a low resistance to ground. The increased current flow, due to low resistance, could cause the surrounding material to heat up to a point where it ignites, resulting in a fire.
The Ford Mondeo models affected by this recall were manufactured between 13 February 2014 and 11 February 2019.
Ford recall code: 18P11
@@alan4x www.check-vehicle-recalls.service.gov.uk/recall-type/vehicle/make/FORD/model/MONDEO/year/2015/recalls
Hi Alan, I bought a 2016 mondeo after watching all your videos and am delighted with it. Do the rear shock mounts ever wear and rattle? my car has a rattle like loose trim in the rear passenger side (around the c pillar) over anything other than a smooth road but the shock doesn't look like it's leaking and I can't find the source, it's driving me nuts. Thanks for the vids Alan!
never had a rear shock mount fail..depends if your rattle is an interior trim or under the vehicle
@@alan4x strangely enough the nut on the top of the shock was so loose I could turn it with my fingers - tightened it up and rattle inside cabin gone completely. Thanks for reply.
I have had this twice on rear passenger side on a 2015 model
Ford all the way 😄😄😄😄👍
LOL Those ABS wire's at all 4 corners go wrong dayly, they actually can do fails codes on thes cars from stering angel to transmission...
They break at the turning/holding point of suppession at front or the rear wall mount at the back! (and at the broken state the car thinks that wheel go's 255Miles or Km/h at that moment...)
one of those rear bearing ABS sensors has bean bad allso so if you find bad wireing then don't stop there! Make sure, the ABS sensor in bearing is working too ;) Nickname "We need one day more ;)"EDIT: Damn, i ripple of that surface rust. ..makes life easy if just can brush it away. p.s. there is short air gun's that has the "nuts" to do that job in the car ;)
EDIT2: 10:50 Eather the bearings here comes with sensor or the bearing side of the sensors has failed on ours at least ones but yes more the wires gos and cut off..
EDIT3: Bearing was good!!!!!!!!!! ABS sensor not so much...
EDIT4: Yes ABS module hade the problem rigth but they only showed the way! The problem Could be the "ABS control module" or wiring to the sensor/ sensor ring/unit.
Yeah! You need really test all those parts before calling it..
Does the Mondeo mk4 have the same bearing as a Mondeo mk5?
similar but different bearings
Godemone profeseure
Using that screwhole for getting the disc off, has cost me a disc once. The shit just cracked.. beware
Are mk4 much different to mk5?
yes they are very different
Hi Alan, funny but informative vids as usual, but why do you seem to specialise in Mondeos? What is it about those cars? Why not another model perhaps?
John Richardson it’s his job to maintain a fleet of 80 odd Mondeos. He does have vids on other makes that come in for random MOTs or repairs.
Is the rear wheel bearing as reliable on a mk4?
the mk4 rear bearings are pretty reliable but i have changed a few on high mileage cars
Now what's the chances of 2 dud rear wheel bearings? The nearside rear wheel bearing on my trusty MK4 petrol Mondeo had been changed twice due to defective bearings. And they weren't cheap either. The last one packed in after only a week and rumbled worse than my stomach first thing in the morning 😆😆
Well it’s almost morning 00:00 England time
well it is now
valve monky yep lol
Well now its 00:15 😃
Welcome to the talking clock it is 00:17
@@marklittler784 this could go on for some time
You never mentioned the price of the donor spares
There is an aftermarket source for wheel bearings ranging from 35 quid to stealer dealer price
Well done on 10k subs think I joined really early on
Don't own a Ford so it must be your humour.....?
Or Miss M .?
prices can vary greatly on aftermarket parts but that used hub and arm assembly cost £80
Yeah the suspension certainly feels like they've put their back into it so to speak 😂😁😀😂
lol
Mark C Littler xh
Mark C Littler ohv
@@dkceres03 OHV ? Do you mean off highway vehicle or overhead valves, the suspension seems more like you would expect on a Peugeot.
Thanks Alan for all the videos! Btw, is anybody here who can share with me electrical schematics of mk5? Thanx!
I need them too. Someone on eBay is selling them for £20
Monica has a tidy set mind don’t she😂
In the UK we call it the pavement not the side-walk, we are not colonials.
👰
All because the man got a plastic hammer made in Hong Kong for his 4th birthday 😂😁😀😂
lol cheers
So rack and mcfearson done ..nowni need absorber..I am sad. It costing me a fortune..
What i mean is the problem sounds exact same as was originally..all along I believed it was just mcfearson gone.. but I took fords word for it ford garage offered a new one I told them,,. no thanks, to expensive..but I'm thinking it was just mcfearson all along..I hate mechanics..except you I wish I had you..
Ahh Monica 😍
I didnt find it boring lol
Oh and it still has a weird noise from shocks. I give up..
lol... sounds like you need someone who actually knows what they are looking for...without hearing your noise i can't tell but generally the shocks can cause a knocking over slightly rough roads and the bearing/mount on top of the front shocks can seize up and cause a noise..almost like spring jumping noise when turning the steering
@@alan4x I am so happy to see this message..I didnt expect that ..As you are clearly a busy man... Please keep doing what you do..You are naturally funny and a joy to listen too. Your way of simplifying how to undo and put back parts on a car, it is just genuis. I camt stress enough, if have the time continue Alan. And Monica is always a nice addition to your videos. My explanations can be erratic.. All over the place.. it was the exact same feeling and noise as the original issue..I trust most mechanics, but not all. They are not all s good as you..No doubt.. car feels better today...1 day after mcfearson replaced..3 diff mechanics now...this doesn't help with the problem...I tell you before the hit on left side front wing while parked, ahhhh,, and probably she hit the tyre from rear side too, car was fine before that. I love the mondeo all the same.. listen just the fact you responded is awesome. Keep up the good work..ok,, cheers buddy. Paul
Sidewalk? aka pavement
lol...it just came out that way
One easey way to get 100.000 subscribers we need miss m to get dirty in the garage fellers luv that kind of stuff ,not me Alan I luv mondeos honest Guv 😈👀👍👌
she will have to replace her own oil and filter next time and i will film it😜
Three cheers for Alan and vodka breath (Monika) on the 10k+ subscribers.
lol cheers.. she's not russian ... czech
Soon be Halloween not giving anybody any ideas 😂😁😀😂😈
i have a costume😜
So noisy you could here the car on the side walk in the USA, must have been far worse on the path in the UK ….
lol
mondeo mk5 its biodegradable car"selfdestruction"
i have mondeos petrol from mk1 to mk4
and thanks to you prevent myself to buy mk5 🥶
but i see ford no longer make mondeo mk6 or higher number,beacause prototype self degrade on desk 😂🤣
Don't bloody tell ford something is lasting. R u mad. They will be made of plastic next lol
lol
So true :)