Any regrets? - RTX 3060 Ti Asus TUF OC 6 months later!
ฝัง
- เผยแพร่เมื่อ 4 ก.ค. 2024
- This time we'll take a look how the Asus RTX 3060 Ti TUF OC holds up after 6 months of usage.
Looking for a GPU support bracket? Here's some (affiliate):
amzn.to/3RunRGH
Liked the GPU and want to purchase it (affiliate)?
amzn.to/3cXO8xZ - วิทยาศาสตร์และเทคโนโลยี
![ช่วยพาฉันผ่านเวลา - วสันต์17 [Official MV]](http://i.ytimg.com/vi/HFnntWoqc54/mqdefault.jpg)
10/10 video. Thank you!
Love mine. Clocked it about the same as Jay did and temps are not an issue.
Yes this card has great thermals, love mine as well.
Thank you, my freind :)
TNX MAN just bought now cuz of your video i was really confused
Good choice :)
I've had this card since march and never once have it gone above 55 degrees celcius. That said, I usually play on 1080p and cap my FPS at 100.
Nice!
Wait why do you cap your fps, what benefit does it do
@@vivs005 Depends on the game. Say you play an older game and it runs 300fps and your monitor is 120hz, then you're running your GPU hot for no benefit at all other than maybe 2-3 miliseconds of response time. (Which unless you're a pro player, you wont notice anyway)
If you're running your GPU/CPU maxed out all the time, it generates heat plus use alot of power which in turn effects the lifetime of your GPU/CPU.
@@Massivecarcrashthank you i didnt know that
Thanks for sharing your excitement! It's always great to hear from someone who's about to experience a significant performance boost. Enjoy your new GPU, and I hope it serves you well. Feel free to share your thoughts after using it for a while; it's valuable for the community. Happy gaming! 😄🎮
Nice review, I'm looking to build a small m-itx system for my family to use..thanks
Thanks for the vid! Not many reviews on this one especially with such approach :) Getting mine tomorrow, can't wait! After 1050 2gb it's just an insane performance boost for me hehe. Btw, for anyone wondering about the temps - afair it's about 60 degrees (or less) on gpu in bigger cases, Leizerg has compact case so it's 65 :)
Hey! Thanks for the kind words :) im sure you’ll be satisfied it’s a great value card.
Thank you for the video! I wanted to get MSI vesrion, but it is out of stock, and cost more around here. About asus i was paranoid about coil sound and hynix memory problems.
No problems so far :)
Got mine in a Omen pre-built, so it is technically an HP 3060 ti. I have it for 13 months now and it is my first ever card, very happy I can play every single game there is in top quality.
Great value card! I wonder what 4060 Ti is going to be like, lets hope better in every way.
@@leizergprobably similar performance to the 3080
@@leizergit sucks man I’m so sad
Its not that much better than the 3060 ti, yet theres quite an increase in price:(
Just got mine yesterday from micro center it’s a really good card
It is! So glad the prices are coming down.
Card is arriving in a few days! upgrade from a gtx 760 to a rtx 3060ti is a very far jump ig, i cant wait to complete my pc biuld after 4 months
i run this card with my evga b5 550w bronze 80+ 😁 Also I use a gpu bracket for this.
Great review, did you ever figure out the Photoshop blank screen issue?
Nope, unfortunately I didn’t. I don’t encounter them on 4090 anymore though.
{ Gigabyte 3060 Ti Gaming Oc rev.2.0 vs Asus Tuf 3060 Ti V2 Oc } Which one do you think is better overall?
If I wanted to buy one for myself I’d get the TUF.
Hello! What memory chip is on your video card? I also think to buy the same model, but I heard a lot of news about the Hynix chip they quickly burn out so I’m not in a big hurry with the purchase.
Any idea how to check it?
@@leizerg GPU-Z
program and it will show type of memory
@@zonelore I’ll do it today and I’ll let you know. 👍
@@leizerg Thx!
@@leizerg
Can you please tell us what kind of power supply you have and how much power the video card consumes?
have the same gpu and have no problems. 10 month
Hi Leizerg, thank you for the review. If you have GPU-Z application, it shows GPU temperature and Hot spot temperature. Hot spot temperature is always higher. Can you please tell me what is your difference (delta) between hot spot temp and GPU temp (idle/full load)?. Thx.
Hey Santo! I did what you asked - the hot spot temp under stress is 80 degrees, while the highest GPU temp reported is 66.5 degrees. Lowest is 38 vs 29. Hope this helps!
@@leizerg Thank you very much Leizerg, it helped me a lot. I have exactly the same GPU and have similar difference (delta) between Hot spot and GPU temperature (about 13 degrees in load and about 11 degrees in idle. Bye and have a good time with your GPU.
I've had this card for about 6 months as well. About a month ago or so, I've noticed the screen blinking issue too. It happens at least once a day now. I can't pin it down to any particular application. I figured that it was a driver issue, maybe introduced by a recent update. Otherwise, I just love this card.
was there a driver fix or is it a problem that can happen on this specific Asus 3060?
@@MMK86 I don't have the issue anymore. I think I finally figured out that the problem was caused by a particular application I was using, so not even a driver issue. I don't think it had anything to do with this card, itself.
@@alanfarkas What was the application?
Got the same card around 4 months ago. No regrets as of yet although I will add , if you’re getting this card definitely get a bracket to avoid the sag.
Given that’s my only real issue with the card right now I would say it’s great. Maybe don’t overpay as much as I did and you’ll get even more value!😂
Hopefully the prices right now are better :)
I pay 549$ for it was it was it worth it?
@@AniReactz Yes I think it's a great price, it was used or new?
@@leizerg well..new
@@AniReactz nice, even better then! Congrats
What exactly made you switch to this card? Was the 3080 just on loan to you? These TUF cards have a really good reputation.
For my personal needs 3080 was too much. And since I’m financing everything you see in this channel from my personal pocket I had to make some compromises :) no regrets though for 1080p and 1440p it’s enough for my needs.
I think asus the only brand that has space-grade lubricant using turf version to reduce noise level and bearing. Also has fan IP5X a dust resistance to prevent dust comply too much. How was it? Do you need to clean? Alot for dust built up or no? Becsuse IP5X in works?
I think the rating is for dust getting into the fan chassis. The radiator needed a little cleaning but it wasn’t bad after a year. All depends on the PC case and how dusty your room gets.
But the fans are rather quiet indeed
@@leizerg True, but for ASUS dust built-up probably will take about 12 months to 1 year 3 months estimation. Usually GPU within 6-7 months dust built-up if you active using GPU up till 60%-80% temperature. It's all because of IP5X dust resistance not dust-proof, I've seen the science behind it putting on dust chamber using dust air to sprout out from the chamber and it was excellent
Hi Leizerg.
I just bought this model about a week ago (I have the GDDR6X version with 2x8 power supply pin) and I'm on the 3rd video card because the other two cards were returned due to a different noise from the fans when they started (fan ratting) and the second because of the strong coil whine it produced. The board I have now arrived yesterday and it no longer has fan ratting and no strong coil whine noise, it has little and is audible if you listen to it after 150-160W upwards. Mine draws 220-240W in full load.
How is your video card doing if you still have it?
Price: ~374 euro.
Hello andreiba, I upgraded to 4090 about 5-6 months ago so I don’t have the card anymore. But until the last day it has been running great with no issues at all.
does ur version have sagging problem too btw?
@@nolife3760 mine does, just a little bit though
im planning to get this card but the used one for only 350$ you think its worth it? the store is legit i dont know if used card(minning prolly) is worth buying
Hmm if it wasn’t pushed to the limits in bad conditions like heat and so on it will probably serve you well. I’d take a look if possible I’d there are no leaks from pads etc. if there is anything that looks suspicious then I’d skip it. I think when we get 4060 and 4070 the prices will drop significantly.
Good day, I am doing some research for my very first gaming PC and I am considering this card in my setup. Do you think this is good? I am not a window user so I would love you hear your recommendations or advice on this set up specs.
- Ryzen 7 5700x
- RTX 3060 TI Asus TUF OC edition 8gb OR RTX 3060 TI NB V2 LHR-V 8gb
- WD Blue M.2 1TB SN750 NVME
- Gskill Trident Z neo 16GB DDR4 4000MHZ
- Asus TUF Gaming B550M Plus WIFI II
Thank you in advance
Looks good!
Depending how much you can stretch your budget I’d also consider 5800x3d as a cpu or 4060Ti as a gpu.
Thank you for the response, I'll do some research with it. Adding these is expensive for me. I can only afford $1100 to $1200.
Hello, I have this GPU, but in Uncharted or Red Dead, if I raise the quality a lot, the temperature drops to almost 85 degrees, will it be normal?
No it seems you need more cooling in your case. Or change fan curve. Mine never gets above 70.
would you recommend this card for 1440p ultrawide? Thank you for your content helps me decide.
What do you plan on playing?
I still play at 1620p in 2024 with the rtx 3060 ti..it's very good
I wanna thank you for this video :D
But I have a question what do you think about this setup:
i5-9600k
16gb 2x8 GB HyperX Fury 2400mhz (about to upgrade with 2x8, so it will be 32GB)
Asus Rog Strix B360-F Gaming
Thermaltake PSU 650W Silver
Thermaltake Versa J22 TG
The main thing that I'm interested in that is the ventilation will be good for the card and I guess I won't have any performance issues while gaming.
Thank you for your answer.
You should be fine I see the case has 2 fans preinstalled at the front so should be enough in terms of gpu temps. Plus this card has great thermal design much more powerful than what the card needs. In terms of performance there might be a very minor bottleneck from the cpu if you play 1080p.
@@leizerg I'm planing to play in QHD. I hope the preformernce will be good.
@@mortis2193 it should be great 👍what games?
@@leizerg Dying light, spiderman remastered warzone etc.
@@mortis2193 Spiderman and Warzone 2 are pretty CPU intensive so you might hit a wall with the CPU. That's something id upgrade in the future.
How does it perform in 4k video editing?
Its ok for light editing but if you add a lot of effects and transitions it gets choppy.
Покупал свою asus tuf rtx 3060ti gdddr6 oc пришла с Ali Китая имея памятью Hynix в 09.2022 на 99% уверен в том что она была новой и поставил ее в сборку с 5600х и корпусе fractal design meshify 2 lite) работает по сей день в играх и в Elden ring на ультрах средняя температура 36-45 градусов по GPU) в других играх по типу Resident evil 4 remake, Dead Space Remake, A Plague Tale 2 и The Last of Us Remake при 90-100% загрузки GPU не видел выше 60-61 градуса) карта очень тихая и средние обороты вентиляторов (если они вообще включались) были 1000-1200 оборотов) решил поделиться спустя почти 1.5 года и в целом очень ей доволен) P.S: Блок питания Super Flower Leadex 3 gold ARGB 750W вообще его не слышал даже)
Hello. Hynix memory chips, or Samsung?
Hynix
Brother can you tell the memory temp vs gpu temp inder load
I’m sorry I’ve replaced the card with something different. Under load GPU temps were around 67-68 degrees. Don’t remember the memory temps though
1.ASUS TUF 3060 TI
2.ASUS TUF 3060TI OC
3. ASUS TUF 3060 TI V2
4. ASUS TUF 3060TI V2 OC
I am Confused So Much 🥺 I Have found these four versions on Asus official website.
What is difference between them??
Which is the best?
4
V2 cards are LHR. You know OC mean
I bought this card. But it's not detecting in my system. Not in my device manager nor with Nvidia graphics driver. Please help.
New or used? What’s your specs? Need more info.
Had the same issue with mine before. Tried inserting it to the 2nd PCIE slot and it was detected by my pc then plug it back to slot 1. Works fine after that. It may not work for you but it's worth a try. Make sure it's mounted properly
will it work fine on 550w psu i hope you answer
Whats your CPU?
I have the same exact problem. I’m currently not running a gpu on my system just relaying on processor’s integrated graphics since I’m using the pc mainly for class. When I’m using google docs and have two browsers open my screen turn black for about two seconds then it comes back but before it happens about 5 seconds before, it freezes then it goes black then come back and it does it probably two or three times every 5 minutes depending on what I’m doing if I’m just watching videos it’s all good or I’m just doing a single task at once. If anyone knows anything please help One more thing when it happens after I turn the pc on my Corsair fans RGB and AIO screen freezes and won’t work until I reset icue or reset the pc
what psu do you have? and how many watts?
@@cutecat8744 Corsair RM1000x
Hello, I will be buying RTX 3060 ti but I'm wondering if I should go for the asus tuf oc or for the gigabyte's gaming oc. I think that asus's rtx 3060 ti is colder and less noisy and it doesn't really matter in terms of fps in both of these cards, so that means asus's one would be better for me. But maybe I don't know something, if you could say if my reasoning is making any sense heh. I don't care about price because it's almost the same but would like to have good fps but if asus's card option is definitely cooler, which means less sound i think, I would prefer it. I am not into pc's stuff and will be upgrading from laptop with mx150 to rtx 3060 ti pc (so small upgrade i guess haha) and I think asus's rtx is good, but maybe gigabyte's is a lot better and I just don't know it and could eat that louder card for visible fps boost because I care more about it than about sound, thx for help if you managed to read all of this 😄
I had both for tests and I liked the build quality on TUF more. Performance will be roughly the same.
@@leizerg thanks, that reassures me that asus is not a bad choice 🙂
Which memory does it have ? Samsung?
Hynix
Where is the card quiet please ? I've already tried 2 pieces and both cards are the fans very loud although I have a very good exhaust air in the case.
What’s your case?
@@leizerg Corsair 4000D Airflow Tempered Glass Mid-Tower
@@affenchemiker and the front fan is set to intake? Is the gpu mounted vertically or horizontally?
@@leizerg The card is horizontally and the fans pull the air in.
@@affenchemiker ok this is weird then. What I would do is make sure I have at least two fans at the front of the case pulling the air in with decent speed e.g 50-60% depending how loud they are. I would play with the fan curves to optimise the cooling - set to e.g. 50% at all times so that the card doesn’t get hot too fast and increase the fan speed as it gets hotter. If that doesn’t help you can try undervolting it. Last resort would be thermal pads replacement.
I have 3060 12gb oc asus tuf and i5 11500 and im running 131fps in furmark 1080fhd is that normal?
I don’t have results from furnark and no longer have the gpu. Maybe you could run unigine heaven?
@@leizerg I tried running it with unigine heaven, DX11 Quality:Ultra /Anti Alias: Off/ full screen 1920x1080 im getting around 190+ fps
@@arvingabriel6950 thats about right, I had 148 on average but I think I had AA on.
My card ramps up to 1800 rpm on the fans under load. 58C. Very loud. Anyone have any help with this?
Try to change the fan curve manually in Asus software or any other. 58 gives you plenty of room to work with.
@@leizerg Thanks for the reply! I just wanted to see if this was normal behavior. I know i can change it in afterburner but i like to keep the bloat to a miminum on the PC :). Just wondering if others have this aggressive of a fan curve
@@Conner06 not on mine :)
@@leizerg If you ever get a chance could you tell me what your fan RPMS are under load? No pressure tho :) Thanks for helping me out and taking the time to reply!
@@Conner06 I’d gladly do it but I sold my 3060Ti. Maybe someone else comes by and will be able to help :)
Hi Can I turn off the RGB on the GPU?
Yes, in the software
@@leizerg Thank you for the fast response I'll go get this😁
Yo guys im just wondering if rtx 3060Ti tuf gaming would fit into Ms armor v700 case pls answer
Yes it will max gpu length is >400mm
@@leizerg yeah but im wondering about width gpu is 142mm
@@kenanhd5697 max CPU cooler height is 160mm so you should be fine
@@leizerg Ok thanks appriciate it 🤙
I have this and every game I play keeps crashing lmao…
Shouldn’t be happening. Maybe it’s not related to gpu?
what psu power should I have for this card?
600W will be more than enough, you could go as low as 500W depending on your cpu
@@leizerg I have ryzen 5 5600x, and gigabyte b550 gamming x v2 mb. The thing is my rtx 3060ti which I bought a couple days ago is underperforming, it is so bad. I got very unstable fps in furmark, the card is overheating (getting to 90c quick) when it's heat then the fps is even lower. It feels like this card works for 50% its possibility. What's could be wrong with that? My psu is corsair tx 650w
@@AEAN_7 what is your case? Did you buy new or used?
@@leizerg used, but there are seals, and the seller says that the card worked very well for him
@@leizerg and it looks like brand new card
So here is the booper, after 5 minutes I hate this thing, fans feel cheap, sound cheap and are noisy even with the oberhyped dual ball bearing crap. Runs freaking hot even at low settings this thing is ramping up and down continuously. My freaking GTX 970 and 1660 cards that are over 10 years old kick this crappy cards butt for 1/4 of the price.
That’s a very bad experience. I had quite the opposite. Maybe faulty unit? Maybe try adjusting the fan curve?
Bought this card 1+ month ago, second hand with 1+ year warranty left on it.
So far no issues at all, still has good temps and it can run everything I play on my 2560x1080 Ultrawide monitor.
Even the brand new Plague Tale Requiem plays on Ultra with DLSS Quality between 50-75 fps 'I have my max fps locked to my monitor's refresh rate' and that game looks amazing so I can't complain.
In my In Win 101c case the GPU sag was minimal but I almost completely fixed it for free using Jaz's method showed here:
th-cam.com/video/liChy76nQJ4/w-d-xo.html
Thanks for sharing!
are you TUF?
TUF as a rock
lol
@@MMK86 you are not tuf enough go to the gym
Leizerg what do you think for the best setup for a Software Engineer with a budget of around 1800 Euro.
My plan is:
CPU Intel Core i7-12700 2.1 GHz 12-Core Processor
CPU Cooler Noctua NH-U12A chromax.black 60.09 CFM CPU Cooler
Motherboard Asus ROG STRIX B660-I GAMING WIFI Mini ITX LGA1700 Motherboard
Memory Kingston FURY Beast 32 GB (2 x 16 GB) DDR5-5200 CL40 Memory
Storage Seagate FireCuda 530 1 TB M.2-2280 NVME Solid State Drive
Case Cooler Master MasterBox NR200 Mini ITX Desktop Case
Power Supply Corsair SF750 750 W 80+ Platinum Certified Fully Modular SFX Power Supply
Case Fan ARCTIC P12 56.3 CFM 120 mm Fan
GUI: Geforce RTX 3060 12GB
Hey!
Everything looks good one remark though - as far as I remember the cooler will be too high for this case. You need something that’s max 155mm, the nocturnal according to specs is 158.
Edit: okay so it seems that it should be fine, according to a post on Reddit. Never tried it though so can’t confirm 100%
@@leizerg what is your SFF setup. Maybe i can learn from you. I dont get why you have so less review. Your content is worth more then 30-40k views per video. keep up the good work.
By the way dont you want to wait 3 more days for new Ryzen cpus to see how they perform?
@@leizerg I can wait even 2 months but i am afraid will be very expensive as they are new relese... I am new to this and for sure i need some time until to decide the final components. Its my first SFF and want to make sure....
@@ermalbaj good approach 👍 maybe the prices will drop even more when it comes to the old hardware. That’s why I think it’s worth waiting.
I’m personally using Ryzen 5600x with 3060Ti on a Asus board. I’m cooling it with be quiet pure rock 2. I used NR200P but currently switched to Torrent Nano. But I still think the NR200 is better overall. The nano is easier to build in.