Prusa Walkthrough w/Anycubic Vyper
ฝัง
- เผยแพร่เมื่อ 29 พ.ค. 2024
- Quick walkthrough Of Prusa Slicer with my Anycubic Vyper. Just a guide on how to load a profile and a look at the interface itself and where to find the various print settings available.
Download Prusa Slicer, the Drivers and apps package here :
help.prusa3d.com/en/downloads...
Support test piece used in the video:
www.thingiverse.com/thing:282...
Link to My Prusa Profile For the Anycubic Vyper:
drive.google.com/file/d/1y4dr...
Links to My Stock and custom firmware for the Vyper:
drive.google.com/drive/folder...
Linktree with My Various links:
linktr.ee/Zombiej79
Thanks for watching everybody any questions or studio inquiries:
studiozombie3d@gmail.com
========================
Music | Fireworks by Declan DP
License: license.declandp.info
Free Download / Stream: bit.ly/3l4ALgi
Promoted by Audio Library: • Fireworks - Declan DP ... - วิทยาศาสตร์และเทคโนโลยี
Yet another valuable instructional video. You’re a true asset to the Vyper community Will 👌🏻
Thank you, saved my architecture project now. and this fixed the print!!! Good Tutorial
Thank you Very much your the only one that has taken the time to show us Newbies the step by step of this slicer. One question why did you not put the print 180 degrees on its large flat bottom?
I just place the part that way to show how the auto supports work basically. Normally you want to orientate the part the best to reduce suports
I plan on purchasing this very same Printer as my first printer
i did and its sat there while i wait for a new micro sd card or sd adapter to turn up so i can update the displays firmware... has to be an 8gb micro sd or smaller if i remember correctly..
p.s. if youre looking into an sd adapter i ordered a mcro sd to sd ribbon cable adapter
Thanks for this!!!
Hello, why does the print start immediately when the bed heats up and the nozzle stays cold? thank you very much
It's great and I really appreciate it, but I have a problem, it doesn't allow me to change the format of the filament, I don't work in PLA, but in PETG, thanks.
Any chance for a Prusa walkthrough for the Anycubic Kobra Max?
Hi when i first open prusa on the right side under printer i see Original prusa I3mks not anycubic I3 mega something , video is blurry. can you help explain this , thank you
Hi,
thank you for the guide. When I start the print the printer starts printing the line in the front, the skirt and the walls then the printer retract and stop feeding filament. The printer is still printing but without filament. Same print sliced in cura worked well. Do you have any solution?
Regards
Mitch
I got a Vyper a short while ago and am very pleased with it. As a beginner, do you have a recommendation for a slicer... Prusa or Cura?
Personally I use cura most of the time but prusa does give really nice results for some people. I just find cura easier to manage with its ui layout
Hello, Thanks for putting this video together - I'm really liking Prusaslicer over Cura... Could you please clarify the differences between your profile .ini link in the description and the settings highlighted at the start of this video? Thank you!
The profile in the link has the same settings as the video inahvent had a chance to use prusa much lately and haven't had a chance to update the profile. Will try to get a updated profile up
@@studiozombie3d ok, the speeds listed at the beginning of the video walk through are different / much slower / perimeters 70mm/s vs 45 mentioned at the start of the video. Which would be better to use? Still a newbie. Tia!
@@gerrbearmac I use 70mms and 40mms outer walls right now and it's good. You can tweak the outer wall speeds 35 is really good too if your printer is really nice and tuned you can do 45 to 50 on outer walls
Hello SZ3D, first time viewer but loved this how to. I'v been trying to use the Profile from the down load but i'm getting an error message " relative extruder addressing requires resetting. Add "G92 E0" to layer_Gcode." I have no clue how to wright or read code so this all looks a mess to me. could you give me some advice?
Printer settings, go into custom G-code, add G92 E0 in the "Before Layer Change G-Code"
Thanks a lot !
Hey Zombie, mate i followed your video and tried out your Prusa profile with the support testt piece, one I selected the test piece with your profile I received the following error" Relative extruder addressing requires resetting the extruder position at each layer to prevent loss of floating point accuracy, Add G92 E0 to layer_gcode
In the printer settings I think it is you can add the g92 e0 to the box there and it will fix the error
@@studiozombie3d Hey Thanks mate, i found a way around it, I followed the whole video and created a I3 Mega profile like the young girl suggested and then imported your profile, So I have the Zombie Printer Settings, PLA Filament and the printer Anycubic i3 Mega created earlier, if this makes sense
PRUSASLICER PERFIL PETG OR ABS? BRO :D
I have a Anycubic Vyper but when I print something tall the nozzle would hit the model and knocking down of the bed
You can try using z hop to avoid parts and that will help I also find a brim can help hold the print
Hi there, I followed your settings. I'm getting Invalid Data, cannot slice. Add "G92 E0" to layer gcode, do you know what it means? Thanks
It might be the start cgode. Check it and if there's any auto conifg data before the start gcode for something like octolapse it will give a error. Check that first and see
@@studiozombie3d im getting the same issue, not sure what to check
@@motolovin1969 its the start gcode in prusa. If I remember correctly the auto config for octolapse was messing my prusa up. Its been awhile.somce I've used prusa slicer though
Same issue with Prusa 2.4.1 This is my start code copied from Zombie Vyper ini
G92 E0 is there. Wrong order? Help please
G21 ;metric values
G90 ;absolute positioning
M82 ;set extruder to absolute mode
M107 ;start with the fan off
G28 X0 Y0 ;move X/Y to min endstops
G28 Z0 ;move Z to min endstops
G0 Z0.2 F1800 ; move nozzle to print position
G92 E0 ; specify current extruder position as zero
G1 Y10 X180 E50 F1200 ; extrude a line in front of the printer
G92 E0 ; specify current extruder position as zero
G0 Z20 F6000 ; move head up
G1 E-7 F2400 ; retract
G04 S2 ; wait 2s
G0 X0 F6000 ; wipe from oozed filament
G1 E-1 F2400 ; undo some of the retraction to avoid oozing
G1 F6000 ; set travel speed to move to start printing point
M117 Printing...
G5
Go to 'Printer Settings', 'Custom G-Code' and use this for the 'Before Layer Change G-Code':
;BEFORE_LAYER_CHANGE
G92 E0.0
;[layer_z]
Can you Share your Vyper Profile? All of mine are in Cura.. Thanks
drive.google.com/file/d/1y4droufFXnvs--BkF8VPDe3nEGdWZ33-/view?usp=drivesdk
the profile that u share to download give error on prusa.. can u check it please?
Printer settings, go into custom G-code, add G92 E0 in the "Before Layer Change G-Code"
Whenever I load your config into the prusa slicer the slicer crashes :/
I haven't seen that issue before I'll see if I can duplicate and let you knowb
Looks like they've removed the speed control in ver. 2.5.2
good profil, a little bit too fast and the primeline isn´t good. at start falls from bed.
You can try increasing inital layer flow to help it stick
no g code bs invalid data blah blah the fix below doesn't work either just use cura
In "Printer configuration - General - Firmware - G-code type change to RepRap/Sprinter
Hi, I tried importing your .ini configs but when I drop in the support test piece I get a warning of "Relative extruder"... "Add "G92 E0" to layer g_code" I checked the G code and it's already there? Not sure what's going wrong? Thanks for all the resources.
Theres a in prusa under printer settings. Gcode between layers I think it is. It needs to be in that box as well if it isn't
@@studiozombie3d Thank you and more specifically for those looking its the before layer change in the GCode setting