How to enter Diagnostic Test Mode on Whirlpool Cabrio Washing Machine DIY
ฝัง
- เผยแพร่เมื่อ 3 ต.ค. 2024
- If your Cabrio Washing Machine isn't working and you want to test it, you may want to enter test mode. You will still need the manual for interpreting the light sequences. Usually, the manual is inside a plastic bag affixed to the inside of the metal washing machine cabinet.
- แนวปฏิบัติและการใช้ชีวิต
Get a whirlpool motor start capacitor here: amzn.to/2NG3eFK
How to install a whirlpool motor start capacitor: th-cam.com/video/HMtb0cryOFI/w-d-xo.html
Get a whirlpool shift actuator here: amzn.to/2RPP2NC
How to install a whirlpool shift actuator: th-cam.com/video/PjEaBrMepbg/w-d-xo.html
How to remove coins stuck in your whirlpool cabrio washing machine: th-cam.com/video/GQhsopa8ZjU/w-d-xo.html
This damn washer is a headache 😫thanks for the video!
Thank you so much,you truly are a life saver. Was frustrated till I you tubed it. My wife will be happy
Thank you. Went through manual tests perfectly. Washes but doesn't advance to spin/rinse on its own. Stops and unlocks after wash.
Check under the washer. the fixing nut for the cluch get lose, broke the cover. Just fix the nut and start working again.
It worked for me to...i reset it some how by doing this, now its working... took me a couple tries
Thanks.
My Cabrio would turn on, but wouldn't begin when the start button was pressed. It just kept making the "locked" sound. So I ran this test and it worked.
Did it reset itself? Mine will start sens spin half and then do nothing.
@@tedmiller1745 It works now. What it turned out to be was the lock at the top right of the lid. It's very weak.
I shift the lid while it's down left & right until it catches and then works. There's probably a sensor there. I'm ordering the new trigger to install.
That's what worked for me.
Might be worth a try on your end. When it's down, try to move the lid left & right and up & down a little and see if it catches the sensor ("if" that's that problem).
Very helpful. Reset successful. Will have clean work clothes tomorrow. ❤
very good, it worked great for me Thanks for the video. I was thinking of having it repaired but thanks to this video I saved an extra
Thank you so much I actually found a video that works
After doing this, still not working. I unplugged the washer and plugged it back in. Now it’s working fine.
How long did u unplug it mine doesn’t work at all
Lid lock stopped working. Diags worked didn't know what to do.
RESET the washer by unplugging let sit 5 10 minutes with screw driver across the prongs on the cord. Seems to fix this problem.
THANK YOU, for your post!
Good tip! Thank you.
How do you recalibrate it so it stops acting out on the spin cycle?
Thank you and God bless you.
to get the stored error code for your machine -go in done then press start -go around to read the error code
These are my specialty to fix
Mine wont switch from starting up to wash and fill with water. It seems to be a sensor, can you help?
Thank you!!! Worked like a charm!
Real helpful ur the best
Turn to left a full turn more like turn to the left once and the error codes are in the complete mode
worked well. thank you!
Thanks so much for uploading! So helpful!!
Mine looks similar. Tried it twice. Wouldn’t work. It used to work after turning it off and back on. But, no more.
Same here.
@@forrestgossett Since I left this message, I watched a video where inside the washer, in a bag that’s glued to the inside front upper left of the unit, is a manual for it. You must first loosen up the top of the unit to get a hand in there and remove the manual. It tells how to run a full diagnosis on the machine. When I did that the 1st 2 times, it fixed the washer for a week at a time. The 3rd time was a few months ago, and been working correctly ever since.
I had to do this several times. mine (just got it yesterday) seems to be stuck in done mode. Won't fill with water, just whirrs and clicks. I put water in the tub and it drained, not washed. How do I get it out of done mode?
Did you figured it out,im having the same problem
Try checking your water line to make sure it's not plugged with sediment
why does it drain after washing?....iI would prefer it wash one or two more times
I tried to do this exactly a few times, I even done it within the 3 seconds advised in other videos and it didn’t give me the blinking lights any tips?
I tried this one but did not get any codes. Will try again
Thanks
My mom has this washer and it washes but stops and shuts down during mid cycle (the wash cycle)
how about draining? does the washer drain pump operate? If not, it certainly won't be able to continue to run the full wash cycle?
its like a safe.
It was fill up with water it starts an stops after it fills like a small boiler water
I have the exact same washer and mine won't go in diagnostic mode 😭😭😭😭😭
There seems to be a rhythm to how you turn the knob to enter diagnostic mode. Keep trying! (Nancy)
You dont have to turn it all the way around.....turn it off....make sure the knob is on normal....with the machine off....one click to left, 3 clicks to the right, back left once then back right once....with these washers when they wont spin or agitate or even put water in to.start a cycle most of the time it is your starting compasator and it really isnt expensive to fix people throw these machines away alot bc of the springs and the starting compasator. Me and my husband own our pwn washer and dryer business and we see it all the time we have saved sp many people hundreds of dollars
@@lisamerritt4726 Lisa, do you know what the problem is when water leaks out of the round white plastic area that is on the bottom?
I have a WTW5500BWO Cabrio and don’t have a manual or service/repair guide like should have been attached inside the body. I can’t find a repair/service guide online and Whirpool can’t provide one or allow me to purchase one showing codes, etc. Do you know where I can acquire one do I can troubleshoot? The tub ring started to shred and I am trying to troubleshoot before taking apart or calling a technician. Thanks!!!
It’s difficult to read via the video of the guide here, and I am kinda a ‘have it in my hands’ versus digital copy kinda guy🙂
omg omg omg thank u so so much. It worked
Think mines stuck in sensing mode. Can’t get it to start. Senses for a while then lid lock pops off and nothing happens. Think it’s the actuator
Mine is doing the same! Was it the actuator?
Mines not working
I have that Same Washer, but my problem is that the Lid Lock Clicks and it won't start. Any Idea's?
The lid lock makes a loud click when it engages. So that would be normal. But nothing happens after that? Find the service manual, enter diagnostic test mode, then use either automatic or manual test mode to verify functionality of the other actions....hot fill, cold fill, agitate, spin, drain, etc. That might help you. Also, check out my other videos on the Whirlpool Cabrio. Good luck.
@@Buckwsr I replaced the Lid Lock Assembly, but no luck. Put it in Diagnostic Mode and no agitate nor spin.
Does the tub fill with water? If the issue is no agitate and no spin, the culprit may be 1) drive belt, 2) motor, or 3) shifter/actuator. I have videos on replacing the shifter/actuator, and also the motor capacitor. They might be of help to you. Good luck. You will solve this eventually, I'm sure.
I had this issue. The belt underneath had fallen off. Was an easy fix for that.
I have the same washer as well, but my lid lock light is flashing and is also makes clicking noise repeatedly and no water starts to fill as it normally would any ideas about this problem or fix ? Another thought or necessary information , for quite some time I have had to slam the lid to get it to shut and engage properly to begin the cycle and also more recent problems after the cycle is finished we would have to apply Force before becoming unlocked by itself ! Any tips on any of these matters would be greatly appreciated thank you so much !
There is no manual inside my washer. Is it available for download anywhere online?
Try Whirlpool’s website here: www.whirlpool.com/services/manuals.html I don’t have a model number on hand to test it right now, but maybe you could enter yours and see if it works? (Let us know, if possible.)
Mine doesn't agitate in first wash cycle. Do you think my capacitor is the issue. Just asking before i so the manual testing myself
If the motor spins at all, then it's not the capacitor. The shift actuator that shifts between agitate and spin could be the culprit. Just a guess.
Yes it spins for the spin cycle and all but ill check it this week ty
@@allgokusun what did you figure out? Mine is not agitating except when only water is present (through diagnostic modes which didn't yield me any errors).
@@carish1452 of it is agitating with water it is fine.. if it doesn't agitate when water is present do a reset thru the manual.. if that didnt work check the actuator that shifts between wash and spin
Do you have a link to read the codes. This video helped me a lot that’s my exact washer but I have no clue how to read them.
This is Nancy (Mrs Buck)... I have the manual and took a quick video of the chart pages. I don't know if it'll help, but it's the best we can do on short notice. I'll try to upload it in the next 1/2 hr.
th-cam.com/video/rXKKWpjbnpQ/w-d-xo.html
I have this washer and when I wash my clothes everything comes out fine but when someone else washed there are oil looking spots on their clothes. We use different detergents and neither are HE detergent. Any help would be appreciated.
Tassie Butts I had the same problem with my old washing machine and from what I researched on it you need to replace the belt.
I can't hear u
Very helpful video but in all reality in today’s time and age this is stupid! Why not have it to where you can just download an app for your phone, plug it in by way of a USB port and diagnose it that way!? I swear, some engineers are so smart they’re stupid!
you've just given me an idea on how to make some serious money!
That didn’t work
Hey I think your video is broken it stops only seconds in
Runs completely and just fine for me.... Not sure why it wouldn't work for you....?
Bitcchh you wasted three minutes
Be sure to like and subscribe!