Broken Cabrio Washer - Manual Test Mode for Drain Pump, Lid Lock, etc
ฝัง
- เผยแพร่เมื่อ 23 ก.ค. 2024
- I will show you how to enter Manual Test Mode on your Whirlpool Cabrio Washing Machine in order to test the Lid Lock, Drain Pump, Spin Cycle, Fill Cycle, or any other problem you may be having with your machine. If you have an idea of what's not working, you can use Manual Test Mode to verify the functionality of all the major components. Then, once the problem area is identified, use the troubleshooting guide to go about repairing the faulty component. I hope this helps. Please subscribe to my channel and leave your comments and questions. Thank you from FixThisHouse!!!
- แนวปฏิบัติและการใช้ชีวิต
Many thanks for the info! I was able to locate the manual right away…didn’t realize there was one in there. My issue was broken wire right at drain pump connection, was glad to find it, easy fix! Thanks for sharing, saved me $500 on new washer!
Mine was a drain pump. Ran the tests as you showed. Pulled the pump and wired it up direct. It was clearly broken. Thank you for the help
This video saved me. I cant find my manuel anywhere and I needed the diagnostic codes.
Turns out my agitator just had something clogging it. Looked like some dirt or maybe rust particles. Manuel mode tested everything got some water in it and ran the agitator a few cycles then drained it. Seems to have broken up whatever was jamming it. Thank god.
i also have the rust issue, but the washer runs great in diagnostic mode just not real life we need to wash clothes mode lol
Thanks for the help, ill be trying this out as mine won't drain as well. I couldn't believe how well they had that guide hidden. I could barely get it out
Thank you! My system showed my Lid Lock and drain not working. I replaced the Lid Lock retested and it was all set. Now onto the Drain Pump Motor then I'll recheck system...
My manual was exactly where u said... Wow
Thank you! Life saver!!!
Awesome video, thank you! I thought I was done with secret Nintendo video game codes 😂. I'll be using this manual tonight!
annnnnnnnnd of course, i run auto test and individual tests and everything appears to work in diagnostic mode. Pumps fill ,it cycles and drains , but once i try to use a wash cycle it plays dumb LOL Trying to figure that one out now, it seems to skip the water filling and goes to agitate mode. i was hoping for an easy diagnostic test to show a pump failure but naaaaah thats too easy. now i have to figure out how much time i waste researching this gremlin before i decide on blowing it up.
If it skips the water filling, then the machine thinks it’s already full. (Trying to help you think through options.)
Thank you sir
Thank you so much mine was just clicking like a damn clock
What was it? Mine doing same thing and won't fill with water.
Thank you so very much for sharing this. Gonno go test why mine wont drain.
I have a lot of washing machines of this type, but what is the use of this test?
When I did the drain pump test it didn’t make a noise so that means something’s wrong wit my pump?
Your logic sounds correct.
You can access it thru the lid
How about a reset?
Mine won't turn on. It just flashes lid lock
The lid latch is a common wear item. Your latch could be broken. We once extended the life of our machine by duct taping the latch, lol.
Bendiciones, Juan 3:16 (NVI). Jesus te ama.
Gracias
@@fixthishouse3303 de nada 🙂. Dios te bendiga a ti y a tu familia.
Blessings, John 3:16 (NIV). Jesus loves you.
Thank you!
@@fixthishouse3303 you welcome 🙂. God bless you and your family.