Chinese ATV No Spark
ฝัง
- เผยแพร่เมื่อ 29 พ.ค. 2018
- Basic Chinese ATV Wiring to get spark! You must hook up a kill switch if you plan to ride!
I opened a Patreon page.
please consider helping out.
All earnings will go to this channel to make it better.
Like a New Camera!!!
/ mikesgarage
Man eveytime I get a project and I always watch ur viedo again to rewire the 110cc motor and u make it so easy to understand . Thanks for the knowledge and keep making viedo u doing a good job .
Thanks I appreciate that.
Thanks for the video!! Helps out a lot
Got my bike going due to this video; legend thanks heaps. Not to mention I got the bike from a scrap yard got new parts for it did this video wiring and now running
Great video mate, helped me get my little nephews quad going
Thanks. I am glad you got it up and running.
N
in
Thank you very much buddy I appreciate that you're about as easy as it comes whenever it comes to TH-cam videos you can't get more basic than that good job man
Thank you . Sorry for the late reply.
Great video, worked out to diagnosis the spark perfectly. Thanks
Thank you so Much for the Comment! I am Happy it worked out for you.
Easy explanation. Thanks, well done and to the point!
Best video on the subject….liked and subbed, THANK YOU!!!
Thank you so much I am definitely learning soooo much through your teachings 👍🏿👍🏿
You are so welcome! I appreciate the comment and im glad it worked out for you!
Thanks for the info... you rock with a simple wire !
Thanks Much!
Thanks man helped me out so liked and subscribed! Keep at it
Thanks for the sub! I am glad it worked out.
Thankyou for your video! Very informative
Thanks Man.
OMG! Thank you so much! I got mine done!
Awesome Glad it worked out for you.
Man I'm not a video person myself and I have seen plenty of them but let me tell you you are the only person that really breaks it down the way it's supposed to be done I hope to see more of your videos and on top of that I have a situation with a moped that I cannot get no fire to and when I do it dies I don't know if it's the wiring I just don't know I've tried it all my friend
Mike!!! I have scaled TH-cam for weeks now trying to get it to work. Your vid sorted me out and boom I got it running. 👍 thanks sir
Awesome! Sorry you did not find me sooner. Thanks for the reply!!
Thanks! The information was helpful!
Glad it was helpful! Thank you.
Was helpful man. Appreciate it
Thank you! You are welcome!
Thanks to u got mine wired up and running within 15 mins nice vid💪🤟
Awesome!!!! Glad its running.
Dade I buy a 110cc Chinese 4 wheeler. And it didn't run bad wiring and I watch ur video and I don't know shit about rewire 4 wheeler or bike . I did what u say on ur video and man it take me 15 minutes to strip everything down on a Wire and I rewire from scratch like you did and I put a kill switch and starter button on it and the damn thing fired up. Thanks u keep up the good job .
Very useful, thanks for sharing, all the best to you and your loved ones
This helps a lot, thank you!
You're welcome! Thanks for the comment.
Bought an old Yerf dog CUV rover…ran great until yesterday,,, no spark! Your video will help in troubleshooting. I am very familiar with the Japanese big 4 UTV’s and ATV’s wiring,,, these are bit different THANK YOU
Big fan from India, Manipur state I really like this video I search this type of teaching video so today I get Really thank tou you bro
Great explanation needed this
Glad it was helpful! Thanks for the comment!
Kool video, subscribed, thanks
Thanks I don't make many videos. As nitro rc dude so kindly pointed out I don't have a good camera.
@@mikesgarage9757Quality is ok, most importantly, your content is excellent!!
@@CayRome Thanks. I am going to make an effort to do more videos.
Worked for me!
Great video man. Helped me figure out my ignition switch was the culprit.
Awesome! Glad it worked out for you.
@@mikesgarage9757 I used this guide today and it was perfect for what I needed. Where you have installed your "on" switch in the box, this is where we would wire in a momentary switch to get the bike started correct? Once the bike has started and the button is released, the starter will disengage and the bike will stay running until the kill switch is pressed using the center connector on the CDI plug. I want to make sure I don't keep the starter engaged and burn it up. Thank you man for the help.
@@patrickfields2362 Yes that should work fine. Glad it helped out.
@@mikesgarage9757 Do you have a fix to be able to keep the battery charged with a shortened harness like this?
Thanks for this video 🙏
There’s 1K dude!!!! Congrats!!!!!
Thanks man that is awesome!
Mike's Garage where do I hook 1 wire for kill switch cdi I weren’t clear enough
@@Cody-ye3ye The Center Wire that's not hooked up on the CDI Bottom Middle.
Awesome video, found my problem, thnx
Glad it helped! Thanks for the comment
Will there ever be a TH-camr that gets straight to the point without unnecessary comments that just take up time and interest!
Thanks man your a beast 💪
No problem 👍Thanks For the Comment!
Beatiful atv engine is running thanks for your help
Glad it Helped. Sorry for the Late response.
@@mikesgarage9757 thank you
You sir are the absolute best I was about to bring it to the junk yard for couple bucks and but a new motor but this video helped a ton i can’t thank you enough for getting straight to the point and just telling us what you did very smart and saved a lot of time👍
Lmao Thanks Ma! I do apriciate it.
I have been going nuts with a customers 4 wheeler like that that someone else had destroyed the wiring on you saved me alot of headache figuring out what went were!
Thanks! I am glad it helped.
Great video
Thanks!
Thank you! I Really appreciate the Comment.
Thanks Mr Mike keep up with these videos & wite harnes thanks ,Say hello Joe.
You got it
Thanks I under stood you straight to tha point.thanks
You are welcome! Thanks for the Comment!
Thanks man it did work and just so u knoe no one got hurt
Awesome Man. Thanks for the Comment.
Hell yea thx, couldn’t find out why i didnt have spark.
Glad it worked out for you Thanks! Thanks for the comment!
Your awesome bud ty so much. Now if only I could get my floats right lol
No sweat. yeah the carb can be tedious on these china bikes.
Put it level with the botom of your carb
Very very helpful thank you so very much
You are welcome. Thanks for commenting.
You’re welcome
You are the shit ive been messing with this atv for months trying to figure out why i haven't been getting a spark and everyone else shows how to hook it up wrong and i thought why not try what this guy is talking about and boom i got spark finally wish i would have found your video sooner thank you so much im definitely subscribing and anyone who is in the same spot i was do what hes talking about theres no need to keep looking at other videos that get you no where 🎉
Awesome! I'm glad it helped out. I tried to get to the point. I see alot of videos on here that tell you how to do things but it's confusing when they explain it.
the only part im stuck on is how he wired the switch that is between the poles. he said there is no magic there but i honestly know nothing bout quads or electrical wiring. can anyone help me out
Man why didn't I find your video first...grrrr. This ATV of mine ran when I parked it. Cleaned it up and then no spark. I already bought a new coil and it still didn't work. I had to remove the plastics again to get to the other connections under the fuel tank. Finally I have spark again...Thanks to your video
Thats Awesome! Thanks for the reply
Helped me alot
Thanks! Sorry for the late reply.
Thank you sir!
Thanks Mike .....you made it simple
Thank you I tried.
This is an AC cdi circuit.
With a DC cdi circuit you need a 12v input (not the red and black wire).
If you hook up a DC cdi this way, you will fry the cdi box.
True, but this is for a Chinese ATV not a GY6. I have yet to see one different. not that they are not out there.
You nailed it.
Make more videos please
Should have another one up next week. Thanks for the comment.
Good man thanks 😊cheers
Glad it Helped!! Thanks for the Response! Sorry its a late one.
There's no ground coming out of my engine. I opened up the casing and did however discover the blue wire coming from the pickup was burnt out. I have replaced this but still no spark. Any ideas?
Great Mr Mike,continúe thanks sharing Say hello Joe.
Thank you, I will
very simple telling 3 times. thanks
Great video! It really helped me restore one that had been left out in a field for years.
Awesome! Glad it worked out for you.
Thanks,its work
Awesome! Glad it Helped.
THANK YOU!
To the point, clear and no wobbly camera images. YOU ARE A ROCKSTAR!
Thanks Much Appreciated.
Don't forget the ignition switch to as it was a new one had that problem.
Thanks for the video, and you can always kill any motor if you pull the plug wire off quickly
Yes you can. Thank you.
Good way to get zapped. Better hold it back away from the plug. I've seen the spark jump 8-10 }inch
@@ballzmahonee5645 I had a yamaha banshee that had no kill switch. I had the throttle get stuck wide open and I didn't wanna blow the clutch if I pulled it so that's when I learned the trick
Hi can u show how to wire a rectifier
Hey Mike
Thank you for your videos they are very informative. I found a 110cc atv.
I ordered, left and right brake handles.
My question is, where do the wires go for each.
Are they brake light wires?
Thank you
Thanks for the Comment. I think one Side is for the Light and the other is for Safety Start. Where the lever has to be pulled in to start the bike.
Hey Bud! Thanks a ton! Mine came to me just plain roached from a scrap cleanout. Looked complete though so I had to try. My CDI is a little different than the one in your vid but between You and a schematic, kind of splitting the difference, I got it sparking and running. Does that kill switch ground the ignition like an old magneto lawnmower engine, or does it kill the power to the coil?
Like a Magneto. I am glad the Video was useful to you. Thanks for the reply.
@@mikesgarage9757 Understood. Thanks!
Good job thx
You are welcome! Thanks for the Comment.
Yes what does that other Square black box that mounts under the seat do
I was wondering if you can make a video of the wiring from solenoid to ignition
did you find a vidd
Thanks alot
Thank you for the Comment!
Can you do a more explanation video of how to check what causes no spark
Good video . But what are the normal voltage outputs from the stator to the ignion box and from the box to the coil ?
So the system can be tested for what component failed .
I have not done those tests, so I would not know. Sorry I cant be more help.
Thank you so so much
No problem
I took the wiring harness and engine off a 200cc enduro motorcycle how can I go about bypassing the key ignition wires basically I'm tryin to figure out how to make a wiring harness out of the old harness that came off the bike it ran before I took it off but I cant get starter to crank and cant use kick start. Reason why I cant use kick start is because i swapped it on my 1985 Honda atc 185s and kick start cant travel far enough.
I am not familiar with that system. I assume you would connect the wire that pass power.
Thank alot sir!! Question? For kill switch I have a blue wire coming out of plug for cdi...is that the kill wire??
if its in the middlle probably
Hey man great breakdown but how is going to help me figure out why I have no spark? Can you help me troubleshoot? New harness and did some welding on my frame but disconnected everything and removed stator. Any ideas?
CDI? did you disconnect grounds when welding?
How many wires are for ground?
Nice 👍
Thanks!
Good video but how do you test each mechanism in the system? I have a Panda Trail Rider 70 with no spark.
Sorry the bike is in storage.
Hi can you run the engine with the charging wires disconnected thanks Mike from england
The one I was working on would start up and lose spark shortly after, I unplugged the remote start and now it stays running.
Also how do you connect a start button please help
,, thank you for the video it really helped me out a lot keep up the good work
Thank you for the Comment! I am happy that it helped you out!
Hey Mike thanks for the video but I got two wires
Can you put together a video on how to wire up front and rear lights?
I do Plan on doing more videos of this bike, but it will be in the winter time.
I have 84 honda trx 200 with no spark can't figure if it's the stater,coil or cdi any ideals ?BTW good video
Thank you
Learned alot. Very good. But still can't figure out why I'm not getting fire on my switch.
I hope you got it. Thanks for the comment. Fire on the Switch?
ty
Very hard to figure out. Ur smart
Glad it helped.
Hey I have a eton 150cc and I cant get spark on it. I have a question, does the neutral safety switch and all play a role in getting spark? As mine has a PTC and a neutral safety switch but cant figure out how to wire up either
Sorry for the late reply, but I don't have the answer to your question.
@@mikesgarage9757 its all good lol i dont need either i already got it sparking like mad just cant get it to run
@@shiloh-onecallidoitall8886 how did you get it to spark
What if my stater doesn't have a black and red wire?
I'm gonna go try it see if that works now if I do that and still no spark how will I know if it's the cdi coil or stator and what about the rectifier isn't it supposed to be in there somewhere please you have other videos on these
You would need to ohm out the stator. I'm sorry I don't have the values of what they should be. The Voltage regulator is for charging. You don't need it to run. I don't have any more Videos but I am planning on making some. Life has been crazy. Thanks for the comment
great video my stator has all the other wires but instead of black and red it has red no black stripe is that the same wire ? any help is very helpful ,thank you very much
Its hard to say. My "Guess" is it's the same
Thank you, buddy. Thank you, buddy, I have a question.
Do you tell me what these wires do?
Which ones?
I have a 125cc hellcat raptor motorcycle and I road it in the rain and I can’t get sprk what if I just buy a new stator
All the videos I see. Everyone has 1 plug on the cdi box mine was 2. & my wire colors are different. Please help
Good vid but....which bottom position to attach ground off switch? It looked like you were pointing to bottom right, stator black/red wire
Bottom center there is no wire in mine. just run it to a switch then ground.
@@mikesgarage9757k
How did you hook up the switch between the two bolts on the starter relay? Can't tell in the video
one to each Terminal
I have two boxes which one do I know is the CDI box the one under the gas tank or behind the gas tank
The plastic box is the CDI the metal one with heat sync is the voltage regulator for your lights
My stator have 2 x yellow, blue and white and the green wire. How do i connect them my cdi have 4 pins. There is no black and red wire
Very good video. Saved me a lot of time. Can’t thank you enough
I have power to my new stater and it's pulsing but power coming from my cdi to the coil.
Awesome, its been in garage for 3 years the girls i got it for are into boys now so i guess its mine. That got the spark going, buuuut its makeing a popping sound just when its trying to fire. Any idea what that might be?
Sounds like a stuck valve, or maybe it jumped time a bit? hard to say. shut the gas off and put a little fuel in the spark plug hole and try it. if it fires off you may just have a fuel/carb issue. sorry for the late reply.
Mike I know this video is old but I need your help I’ve asked atleast 20 people and no one know how to help but I can’t find my exact part mine has 3 wires plus the one for the sensor but when I look up the part I can’t find any except a 3 wire plus 2 wires I could really use your help I tried wiring your system up wire from wire but my magneto doesn’t have the same wires I wired each of the 3 up after figuring out which one ran the sensor but out of the 3 wires I tested all 3 with no clue which one to start with and still no luck
Thanks for reading this and thank you for helping you definitely have my sub
Maybe its an AC system? Is it like this?
www.ebay.com/itm/394752655168?hash=item5be9177f40:g:4sgAAOSwXIFkEOA0&amdata=enc%3AAQAIAAAA4Ff0Qv3UNGUqQmOf24esgkdXhlq196te9gW4seDSwJ8TimIZUShF0gEoL9cdVeDmPnxLq8MIhNOzNRCI3f0tMow8WhDSUIqHlXdefzhHz%2FwaMbtvOffFW3kgstzPAQUU5gE%2B6hC9pymGD3gE4VXI0rgLPUbjaIcNDyO46NcO1n%2FDOwdDtEQMWekcH9of1AwSVO09CzibLmHn2aNLg9rYlhedcKvV5V%2Bs6aCxIgEVttEwdk6j%2FQ2IgcQiXEh7J4rUjP09uOHy0Zvu8ZX8bWe5dFXT1vTOcGt6dUkiFnPi9o2B%7Ctkp%3ABFBMpsbonfdi