Pop N Lock Power Tailgate Lock Install (2020 Toyota Tundra)
ฝัง
- เผยแพร่เมื่อ 16 ต.ค. 2024
- step by step instructions on how to install pop n lock on my 2020 Tundra Platinum...almost identical to Toyota's OEM version, but less expensive...very easy install and definitely worth the small investment!
Pop N Lock (2007-2020 Tundra) (used in this video)- amzn.to/2I9b4uG
Updated PNL Version- amzn.to/3p63aTR
OEM (2019 and up)- amzn.to/38bgS1B
Washers- amzn.to/3oZLxVq
Channel Partners/Discount Codes
xtrusion-overl... Code- NitroZ18
LASFIT lddy.no/qnhl Code- JUDGE10
ESP Truck Accessories- www.esptruck.co...
Discount Code- NitroZ18Fishing
carlinkitcarpl... Code- Z18
carpuride.com/... Code- Z18
screenprotech.... Code- Z18
www.tufskinz.com/ Code- Nitro10
cupgrip.com/?r...
Ultimate9 Throttle Controller- bit.ly/NZ18-evcX Code- NITROZ18
www.setpowerus... Code- NitroZ18Fishing
Cobra RAD 700i Radar Detector- shrsl.com/4g29d
blackbeardfire... Code- IFISH2248
www.YOLOtek.co... Code- NitroZ18
billettiedowns... Code- NitroZ18
www.shinearmor... Code- Judge20
versatrax.com/ Code- NitroZ18Fishing
coverado.com/?... Code- JUDGE10
GREAT video! This is the way a diy video should be done. Very thorough, clear, and step by step instructions with video of the entire process. Thanks so much! I have a 2019 Tundra Platinum and I can’t believe this wasn’t already installed from the factory??! I had a 2018 SR5 and it was already installed when I bought it. Seems like a Platinum would come with it. Anyway, thanks again!
Thank you, I appreciate that!!… and I totally agree, the higher end trims should absolutely come with this stock instead of having to add it on!
Just finished mine on a Tundra 2021 Tundra limited. Pop & Lock fixed the wiring error in the instructions and now the instructions are correct. Having said that Pop & lock should be sending royalty checks! You're a good guy for making this video NitroZ18 Fishing.
Thank you, I appreciate that!!…love making these videos and helping people out, makes it all worth while…thanks for watching!
Great video just installed the OEM from your link. The OEM is the way to go in my opinion because it's close in price, plug and play at the passenger side wire connections, comes with new gromet already on the cable under the passanger front seat, comes with new cable clips at the transition from tail gate to bed. Mine came with very detailed instructions and that with your video made it an easy install.
Thanks Rod!!…and I actually agree here, if I did it again I would just go with the OEM option as well for the exact same reasons…thanks for watching!
I just did mine today , I suggest not using that grommet but to use the one under the styrofoam it’s a secondary one and use the smaller grommet under the car to feed your wire. This way there will be no water can get inside your car .
Yea you can definitely do that!...thankfully I haven’t had any problems with water getting in, but that’s definitely an option!... thanks for watching!
Nice job sir! Always great videos and very helpful.
Thanks for the feedback, and for watching!!
I had used PadLock for Toyota Tacoma 16-22 installed on 2014 Tundra Cremex the wiring is opposite . The factory line are white with silver dot and blue with silver dot, I had to connect green from the padlock tow white with silver dot, and blue to bule with silver dot, may be the supply factory had reversed wires already, according to your vidio , it will need to reverse the wires , I had this mistake, just want to share here. Good Luck and God bless!
It’s a great video but I bought the OEM from Toyota and blue goes with red and green goes with the white....when I wired it up like this gentleman said to in the video my lock and unlock were backwards from each other....maybe because it was OEM and not the pop and lock....also Toyota sent no instructions on how to install this at all....I’m grateful for this video. Thanks
Thanks Randy, much appreciated!!...and yes sir, you’re correct...the OEM wiring is correct out of the box, and from what I understand, the new Pop n Lock kits are fixed as well...I guess they finally caught on and fixed the issue when manufacturing...thanks for watching!!
Hello Sir,
Your channel has helped me so much with all my after market installs. You always do everything the right way. I just had a quick question. When you were up underneath the passenger side kick panel to tap both wires, do you know if the location of the reverse light wire is around or located in any of those harnesses? I’m installing an aftermarket camera that has a trigger wire that needs to be tapped into the oem factory reverse light wire. I have a 2017 limited. If you see this I would really appreciate your time and feedback. Thanks
Thank you, I appreciate that!!…unfortunately I’m not 100% sure on this one, and I don’t want to give ya any wrong info…I don’t have this truck anymore either, hopefully someone can chime in and help out…thanks again for supporting the channel, and I’m sorry I can’t help more with this one!
Nice job man! Just got one today for Christmas and I plan on installing it on my 2021 CrewMax
Thank you!…definitely a nice upgrade!
It was a blue and white with silver with the blue connector for my 2014, I guess they changed it with the newer years. I connected the green to the blue wire
Thanks for the well detailed instructions and pictures, great channel and again, thanks for the well explained instructions.
Thanks Rich, I appreciate the feedback and support!
Looks like pop and lock has a new actuator design that's easier to install and seems to work better, also not as loud. It is also plug and play and fused, and they even include two square clips that replaces the clips that hold the backup camera harness. Their clip has an extra hole to run their harness. Install was extremely easy. It is Pop & Lock PL8547TAC
Yea the new kit looks good!…if mine ever fails I’ll be upgrading to that kit for sure, thanks for watching!
This definitely should be included in all the trucks, let alone all the higher trim packages. My 2020 Trd pro needs this.
Do a video on the led taillights you installed. Any issues with them? Plug and play? Etc.
Totally agree, sad that Toyota doesn’t include this right outta the gates, such an inexpensive feature but well worth having!...and yea no prob, I can do a quick review video on the tails, thanks for watching Joe!
they didn't even include driver side grab handle and the actual trans cooler. Toyota really cheaped out on these features while charged higher price.
Always the best how to videos!! Thanks
Thank you!!…I appreciate that!!
Can this be added by the dealer? I ask being a newbie to trucks and having found a TRD Sport (not easy these days down south) I like but it has no tailgate lock. Thx.
Yepper!... Toyota actually offers an OEM version that is basically the same thing… Ask them about it and they should easily be able to do it for ya!
For those of you that have a 2017 tundra (I have a 2017 sr5 crewmax) it will be the blue wire with silver dot for the blue wire from the pop lock to connect to.
Thanks for posting Shawn, much appreciated!
Great instructional video. Thank you.
Thanks man, I appreciate that!
Great video. It worked perfectly for my 2018 tundra. Thanks for the video. Great channel 👍🏼🇺🇸
Thanks Frank, much appreciated!!...glad it worked for ya, thanks for watching!!
Just fyi. Pop And Lock has a new model out now. PL8547HD for the same year models. It has a new locking mechanism and is a more complete kit. Comes with new bushings for thru tailgate installation and has molex connectors throughout. Much better kit than the video used kit for the same price. Also if you get the new kit the wiring instructions are correct. Do not swap wiring like the video for the old kit. Doesn't have a loud thud either when locked. (Edit: the loud thud is still there but no biggie) Very happy with mine!
And I meant to say Thanks for the video. Still helped me greatly for routing the wires and panel removal!
Hey Cody!...yes sir, I actually have the link to the kit I used, and the updated kit in the details section, thanks for the feedback!
no problem, glad it helped!!
Awesome video brother! By any chance was it a little tougher using your key on your tailgate? Wondering if I overtightened anything?
Thanks man, I appreciate it!...and no sir, I don’t have any trouble with the key...I would make sure everything is lined up properly and working freely (no friction anywhere)...let me know how ya make out!
How do you take your tailgate off?
My 2021 Toyota Tundra TRD PRO did not come with a pop and lock... So the one you advertised isn't OEM?
No sir, it’s the pop n lock version, but it’s almost identical to OEM, and a little less expensive!
I have the links to both models in the info section of the video if it would help!
@@NitroZ18Fishing Thank you for the share!
no prob, happy to help!!
Great video, well explained!! Keep it up!!! I just ordered for my 2018 1794! Thank you!!
Thank you, much appreciated!!...love the feedback and support, thanks for watching and let me know if I can help ya with anything!!
NitroZ18 Fishing thank you! 🤝
NitroZ18 Fishing all done man! Thank you! Everything went smoothly ! But mine came with plugs and everything and the actuator looked different! The only thing I had to go back and get a lil more slack on the cable! 😂 besides that everything went good!! THANK YOU!!!
that's awesome, glad to hear it!!...thanks again for watching and supporting the channel!!
Nice, I think I will order this for my truck soon
Definitely worth it, thanks for watching!
great video
What pop n lock model # was that
Tks
Hey Jaime!...it’s the Pop & Lock PL8535, thanks for watching!
Great video of install and details.👍
Thanks Troy, I appreciate that!...thanks for watching!
Does it work for Tundra 2015 as well?
Yes sir, it’ll work!...I have direct links to the kits in the info section of the video, hope that helps!
This won’t actually open the tailgate?
No sir, that’s a different mod to auto open the tailgate using key fob...that’s on my list of things to do, I’ll have the video up when I get it done... thanks for watching!
This only locks/unlocks tailgate
Dude, toyota makes that part as a factory accessory. I got it included when i bought my 2020 tundra. You would have gotten toyotas warranty on that part.
Yes sir, Toyota makes an OEM version...but my salesperson didn’t make me aware at the time of purchase, it’s not automatically included in any package...my 2020 Platinum has every option offered and it wasn’t included, you have to ask to have it added on...no biggie to me, the pop n lock is cheaper and super easy to install anyway
I actually didn’t know that Toyota offered it as an OEM piece until after I bought truck, and then I saw the PNL so I went that route cause it’s basically identical, but PNL is less expensive
Thank u buddy!
No prob, thanks for watching!!
I thought 2020 comes standard with pop n lock.
Unfortunately no, you can ask Toyota to add it on for you but it’s not “standard” on any trim or package
My 2019 came with that
Yea the dealer can add it on if they want or if customer requests it, but it doesn’t come “standard” with any Tundra trim...wish it did come standard on my 2020 Platinum for the price of the truck...haha
11:36 dude buy yourself a flashlight, use your phone as a phone !
I’m a bit early!
Thanks for all your support on the channel man, I greatly appreciate it!!
NitroZ18 Fishing your doing A great work on all your videos!! I appreciate that!!
Tt