Ethan. I think that the "Toys" are really bringing out the Super Engineer in you. I think when you see the mini vehicles, it gets your mind working, and you see what is necessary to create the most awesome and powerful "Karts". You are advancing at an exponential rate. I am impressed as, I think, most of your subscribers are also. Both of you are "Monsters" on TH-cam! Do you ever sleep? ;-) Thank You guys for working so hard and pushing the limits to keep us entertained and safe. Keep the rubber side down.
Oh God it's amazing I adore the front suspension and work on the chassis. It's very rare to find someone who works at this level of quality. I really liked it
John Paulk from someone who doesn’t really know what they are talking about, weight basically increases as it rotates quicker. Like if you have a unbalanced wheel on a car, could be a minuscule difference but it vibrates your whole car.
@@johnpaulk994 rotating weight would be the total weight of all the driveshaft components (everything that rotates while the vehicle is moving). It's important because more rotating weight will have higher intertia, meaning the motor has to work harder to get it all moving and keep it moving. Plus, once it's moving, it is harder to slow down.
so many ppl are following your lead and building similar vehicles! they are all singing your praises and WE WILL ALL REMEMBER WHO WERE THE PIONEERS!! that Moto Mule is a character! lol it such a great time to be a you tube watcher!! DO IT FOR DALE!!
I've been a fan since Ethan was in The Woodsmen (or whichever show... it's been a while hasn't it?) I recently took a job with my friend's stepdad. Worked for 3 and a half weeks. Haven't got paid. Got to go with him to watch him pick up a jeep for $400 and still haven't been paid--then he runs out of gas (I told him to keep a gas can w/ him and he said it wouldn't happen again..) and made us walk like 10 miles to get gas for him. No thank you.. No sorry. That's the tip of the iceberg. This video upload today made my month a lot better. I'm so thankful for you guys seriously. You love what you do and you do what you love. Never gonna stop being a fan.
Boys! I see many getting their favorites on youtube, realized long ago that I like your art, you are really inspiring! keep the glow up! this content is the best! :D
Maybe hold off on painting the steering wheel until after the build. Like you said the little bit of red accents might work. Going overkill on frame is a good thing. When ever something breaks its not because it was too strong. The engine will put out some torque. And you might just push it to the edge.
You guys should pick your favorite Mario Kart (or other cart racer game cart) and try to build an exact replica! It would be so cool to see a GHPC version of Mario's actual cart, or the awesome 6 wheel Bowser kart! Just an idea for a future project if you gets ever run out of ideas.. lol
I would have expected you to round off the two verticals plates at the centre of the front of the car as that is where you hit the ground first when the front suspension is compressed.
Luv when you guys put a new video out there! A lot of these things i allready built and tried, but being old i really cant find the energy to build anymore. Then again, looking at you guys is just as fun. And i see new, and better, solutions on some of my old problems.. Keep grinding!
TH-cam put an add a second before the video ended, I watched it for you guys but I feel like that would stop alot of people from finishing the video. Amazing build, cant wait for more!! Still can't believe you guys dont have millions of subscribers, you'll get there soon though
I've said it once and I'll say it again... I friggin love that frame. The fitment is phenomenal for the body, and it looks even more sick with the body off. I could look at a poster of that for hours while I lay in bed and contemplate how lazy I am...
Trim the bottom of the front and add a skid plate as it hits the ground a bit when fully compressed. If you case the ground at speed its going to ruin your day. Food for thought.
Set the Bee Free !!! Steering wheel ... hmmm ... not sure. Yellow n black?!? Or stick with the red ?!? I think you'll need to leave it until you get the body on - Then decide. But you're right - it looks super cool naked. I want one!
Please Keep the wheel red! it would look so cool if you had some red detail throughout the build, as you said it already has it on the shocks. Putting some matching red on the dash would tie in really well, even having some red lines in the seat to mimic embroidery would look awesome too. To take it further you could have colour LED lights under the car. That red wheel is way too nice to paint over, plus the red detail would look awesome when all tied together.
Yet all of your builds are awesome really well done really well thought out but this one just seems exquisite I’d say yellow for the steering wheel And Skid plate would help to
I see a problem @9:46 when you guys are bouncing the front end. The front plates, as cool-looking as they are, need to be trimmed because they are digging into the ground before you hit the bottom of the suspension. They could cause a dangerous situation. I love what you guys do, keep it up!
For the next build, why not take the design from your favorite Mario Kart and make a build based on that!! Love the work guys!
William Stilton - i’m-uh Wario. i’m-uh gonna win
Was just about to suggest the same thing 😁
I can't wait to see this bad boy ripping around!
ME TOO
Ethan. I think that the "Toys" are really bringing out the Super Engineer in you. I think when you see the mini vehicles, it gets your mind working, and you see what is necessary to create the most awesome and powerful "Karts". You are advancing at an exponential rate. I am impressed as, I think, most of your subscribers are also. Both of you are "Monsters" on TH-cam! Do you ever sleep? ;-)
Thank You guys for working so hard and pushing the limits to keep us entertained and safe. Keep the rubber side down.
I would just paint the steering wheel black for a cleaner look.
I vote on redoing the wheel yellow!
I think it's a good call
agreed, yellow
You guys have definitely upped your game not satisfied with mediocre builds keep it up guys its inspiring
Oh God it's amazing I adore the front suspension and work on the chassis. It's very rare to find someone who works at this level of quality. I really liked it
5 LBS you saved in rotating weight. Thats huge for something this size.
Big time
What do you mean rotating weight?
John Paulk from someone who doesn’t really know what they are talking about, weight basically increases as it rotates quicker. Like if you have a unbalanced wheel on a car, could be a minuscule difference but it vibrates your whole car.
@@johnpaulk994 Tape a pop bottle to your driveshaft and find out
@@johnpaulk994 rotating weight would be the total weight of all the driveshaft components (everything that rotates while the vehicle is moving). It's important because more rotating weight will have higher intertia, meaning the motor has to work harder to get it all moving and keep it moving. Plus, once it's moving, it is harder to slow down.
so many ppl are following your lead and building similar vehicles! they are all singing your praises and WE WILL ALL REMEMBER WHO WERE THE PIONEERS!! that Moto Mule is a character! lol it such a great time to be a you tube watcher!! DO IT FOR DALE!!
I've been a fan since Ethan was in The Woodsmen (or whichever show... it's been a while hasn't it?) I recently took a job with my friend's stepdad. Worked for 3 and a half weeks. Haven't got paid. Got to go with him to watch him pick up a jeep for $400 and still haven't been paid--then he runs out of gas (I told him to keep a gas can w/ him and he said it wouldn't happen again..) and made us walk like 10 miles to get gas for him. No thank you.. No sorry. That's the tip of the iceberg. This video upload today made my month a lot better. I'm so thankful for you guys seriously. You love what you do and you do what you love. Never gonna stop being a fan.
DANG I'VE BEEN WATCHING THIS CHANNEL FOR ABOUT A YEAR AND THIS CHANNEL IS SO UNDERRATED. LIKE THIS OF YOU WANT GRINDHARD TO BE POPULAR.
One of the best looking, tightest builds GHP has done to date- and has set off a bunch of other YT content makers to play with- AWESOME, dudes!
Boys! I see many getting their favorites on youtube, realized long ago that I like your art, you are really inspiring! keep the glow up! this content is the best! :D
I like your impaling shaft, I mean steering wheel
Paint the Steering wheel yellow
Powder coat perhaps
Best builders on TH-cam by far!
Hi I'm from East borneo sir, and I always watch your videos 👐👐
This is gonna be a GOOD ONE!!!
Cant wait to see it run!
Yellow for sure, coming along real nice.
Maybe hold off on painting the steering wheel until after the build. Like you said the little bit of red accents might work.
Going overkill on frame is a good thing. When ever something breaks its not because it was too strong. The engine will put out some torque. And you might just push it to the edge.
You guys should pick your favorite Mario Kart (or other cart racer game cart) and try to build an exact replica! It would be so cool to see a GHPC version of Mario's actual cart, or the awesome 6 wheel Bowser kart!
Just an idea for a future project if you gets ever run out of ideas.. lol
This channel is great, I love watching Doogie Howser build stuff.
I can't wait till its done! You guys are my new favourite channel on youtube, editing is always on point
Keep the wheel red! Awesome build guys!!!
I would have expected you to round off the two verticals plates at the centre of the front of the car as that is where you hit the ground first when the front suspension is compressed.
Im sure they will. This is still a very rough draft for now
Then weld a skid plate ....
I can see a front skid plate being required :)
Thumbs up for Bjorn
This thing honestly a piece of art kind of a shame to cover it with the Camaro body🤦🏽♂️
it actually looks cooler just with the tube frame
Looks better than the mustang lol
@@Josh-lz3xo noone said something about a mustang but yeah
@@alarastaff they have a mustang too
What if they did a clear Camaro body copy? 😈
Luv when you guys put a new video out there! A lot of these things i allready built and tried, but being old i really cant find the energy to build anymore. Then again, looking at you guys is just as fun. And i see new, and better, solutions on some of my old problems.. Keep grinding!
Always appreciate more footage of those awesome dogs!!! 🤗
Thx to the people who sold his daughter's lil mustang your channel going so crazy man lot of r&d,learning and other thing 👌👌
Thanks!
Man, Ethan is a metal Wizard. Is there nothing he can't Fab? I wish I had the1/2 the talent he has forgotten along the way. Thanks From Vermont.
Yalls builds get better n better! Im gettin excited to see it go on its own power. Keep up the great work guys!
Can’t wait to see it running
I’d love to see yellow accents on the steering wheel, with a 1/2” yellow orienting stripe at the 12 o’clock position. Keep doing what you do, dudes!
you guys should expand and renovate your garage(if you can)I think that would be pretty dope
That looks AWESOME!!!
Wait till the build is nearly complete to mess with the steering wheel's color.
Leave the red on the steering wheel and match some more red accents like in the wheels or valve cover or something
red stickers, red helmet , red keychain. done.
Your putting out the beat work on yt hands down, consistently
TH-cam put an add a second before the video ended, I watched it for you guys but I feel like that would stop alot of people from finishing the video. Amazing build, cant wait for more!! Still can't believe you guys dont have millions of subscribers, you'll get there soon though
I've said it once and I'll say it again... I friggin love that frame. The fitment is phenomenal for the body, and it looks even more sick with the body off. I could look at a poster of that for hours while I lay in bed and contemplate how lazy I am...
This thing is awesome, can't wait !!
Great video and fabrication, thanks guys!
the chassis it self looks so good....cant wait for the full body
I can't wait to see it go.
That thing is a work of Art
Awesome build! Can't wait for the nxt episode
Man that frame is sick! incredible work guys !
Great video Guys😊😊. That thing is gonna smoke the track 😝😝
I can't wait to see that crazy Camaro cart finished!
Its a beautiful frame job. I agree that is almost more beatifull without the body!
short and sweet vid, I miss the long full on builds.. gotta do a longer vid on this guy
red looks great wow what an awesome machine
That's gonna be fun!
Your other builds are amazing, but this is turning out to be next-level. Can't wait to see how it turns out.
I love all these sweet tables and carts you guys have decided to build lately for all the tools so they no longer have to be operated on the floor
brilliant content, awesome engineering, easy going music, EPIC drone shots and all round polished production.....love your work guys,
looks so good without body !!
Really like that you don't hide it when you get things wrong, been interesting watching your skill set develop and improve, well done.
I like it. I like it a lot. You are the fabricators fabricator.
Back at it again with a mad dope review 🤘
WOW, You guys are getting seriously good at this ! Totally dig your content all the time.
Keep them red looks great guys
Bad ass guys. Might wanna cut those front corners off of your engine mounts though, and then weld over with a plate, like a skid plate.
Excellent!👍
The content just keeps getting better and better. Great work
the beats in these videos are fire keep it up.
Would be cool for the next build to make an awd kart using atv parts. These build projects are so fun to watch. Keep up the good work
Btw man. Your craftmenship is.....fun to watch!!!
Why that axle in the center??
It's a jackshaft axle, centered with the swingarm pivot point so the distance between axles never change thus keeping a consistent chain tension.
@@IvanU90 aaah okay thanks man!
Finally Been waiting for this!! From Australia!
Can't wait to see this thing rip
I‘ m so excited when you drive this thing offroad👍🏻 Great work- as usual!!!
I don’t think there’s enough clearance in the front end
I saw the same, the plates for sure will be cut or grinded during the fine tuning ;)
i never comment on things but mario kart you sir's are the best!!
Trim the bottom of the front and add a skid plate as it hits the ground a bit when fully compressed. If you case the ground at speed its going to ruin your day. Food for thought.
Can’t wait
Set the Bee Free !!! Steering wheel ... hmmm ... not sure. Yellow n black?!? Or stick with the red ?!? I think you'll need to leave it until you get the body on - Then decide. But you're right - it looks super cool naked. I want one!
cooL .. so cooL the chasis
That thing is turning out so nice. Looks like you'll be building a front skid plate of some kind. Awesome job guys👍
Great proportions cartoon like
@ 9:06 my 4yo nephew dose exactly the same thing 😂 nice build guys love it 👍
Yellow on the steering wheel for sure.
I want that wheel on my boat!
Dark chrome wheels and white frame
would look nice
Awesome build guys keep up the great work!
Please Keep the wheel red! it would look so cool if you had some red detail throughout the build, as you said it already has it on the shocks. Putting some matching red on the dash would tie in really well, even having some red lines in the seat to mimic embroidery would look awesome too. To take it further you could have colour LED lights under the car. That red wheel is way too nice to paint over, plus the red detail would look awesome when all tied together.
That trellis frame though 🤤
Yet all of your builds are awesome really well done really well thought out but this one just seems exquisite I’d say yellow for the steering wheel And Skid plate would help to
I'm excited to see this one go.
I see a problem @9:46 when you guys are bouncing the front end. The front plates, as cool-looking as they are, need to be trimmed because they are digging into the ground before you hit the bottom of the suspension. They could cause a dangerous situation. I love what you guys do, keep it up!
It’s pretty hard to criticize anything you guys do but I always thought alittle candy red looks good with yellow on badass machines anyway 😁👍🏻
You guys should try adding gussets it would look great!!
Your fabrication skills are really impressive!
Yellow for sure.
love coming home from a weekend out of town to a new grind hard video
Where do I plug in my Rumble Pak???
It IS a rumble pack.
@@thegenerousdegenerate9395 Its from N64 it is called a Rumble Pak. Check it out
@@Stihlheadd oh ffs.
great project, great videos!
That's a nice looking table.
TURBO THIS ONE!!!!