H-King High Performance Paramotor UNBOXING and ASSEMBLY Spektrum setup from Hobbyking
ฝัง
- เผยแพร่เมื่อ 26 ส.ค. 2024
- Link for more info: bit.ly/2WbPWtz
Follow on Facebook: / johnvhrc
Video Camera used: amzn.to/2Y6lyOM
Receiver I used: amzn.to/2XolsS8
Battery I used: bit.ly/2EqYFNM
Spare Wing: tinyurl.com/y5...
I showed in the video how I set it up for my Spektrum JR9503, I also set this up for a DX6 and its very similar to what I show in the video, so I hope this helps!
DO a test it a little on the ground so you know what trim button does what to the arms. I have been simply adjusting the strings after landing to get it flying perfectly. The right brake line will need to be a little tighter to counter the engine torque. The key is to not have any of the arms go up when giving another input. I did a few mixes and adjust throws.
The HobbyKing™ Paramotor is extremely easy to fly due to its very gentle and stable flight characteristics yet once you are used to it, it will perform loops and rolls with ease. Due to the design the huge high performance 2400mm sail opens quickly for easy launching and it will retain its shape even in turbulence. The single skin durable sail is made from 100% ripstop fabric and comes pre-rigged with tough polyethylene lines and ready to attach to the durable aluminum gondola. It does require a computer radio with mixing and servo control curves, to see what is involved in the radio set up please watch the attached video and also the one for the setting up of the parafoil itself.
There is a high level of prefabrication so assembly time is minimal and it is Plug-N-Fly so all you require is your own transmitter, receiver, and battery. The Paramotor is fitted with a powerful 3530-1400KV brushless motor swinging a 10 x 4.7 propeller, it also has a 50 amp electronic speed controller with 5 amp BEC and 2 powerful 15kg high torque metal geared servos. A 3S lipo battery is recommended and it can vary in capacity to suit different flying conditions. The recommended flying weight is 1.6~2.0kg, in light wind conditions it is best to put a lighter battery in to keep near the 1.6kg weight. In windy conditions, it is better to put a heavier battery in to fly around the 2kg mark. The undercarriage is easily removed for hand launching and catching and also for slope soaring.
If you fancy trying something a little different then the HobbyKing™ Paramotor is for you. Great fun to fly without being too challenging and it looks great in the air. Pre-assembled and Plug N Fly also means you can be airborne very quickly after taking delivery.
Features:
• High performance powered parafoil
• Plug and Fly format ( you only require a Tx, Rx and battery)
• High level of prefabrication for quick assembly
• Gentle flight characteristics, however, it can perform loops and rolls
• Removable undercarriage for slope soaring etc
• Durable aluminum airframe
• Wide flying weight range (1.6~2kg)
Specs:
Type: Plug-N-Fly Paramotor
Parasail Span: 2400mm
Motor: 3530-1400KV brushless
Propeller: 10x4.7
ESC: 50amp
BEC: 5amp
Servos: 2 x 15kg high torque metal geared
Flying Weight: 1.6~2kg
Recommended Battery: 3S lipoly (not supplied)
Required:
1 x 3ch or more computer transmitter with mixing and servo control curves
1 x 3ch or more receiver
1 x 3S (11.1v) lipoly battery and charger
![[TH] 2024 PMSL SEA W2D5 | Fall | พลาดวันนี้ จะต้องเสียใจ](http://i.ytimg.com/vi/A5-Cuo12p6A/mqdefault.jpg)
I have a modified gold rosita that is now a collector. Got me one of these on Wednesday can't wait to fly this monster.. great video
Mine is all assembled, and I downloaded an .SPM from RCGroups that seems correct for my NX8. Hoping to maiden it today and will try to video that with a tripod cam and hat cam. I love the canopy. This is no toy, its the real thing in miniature. I have a 5000mah battery coming, but the biggest 3S I have right now is 3200 and am hoping its heavy enough. The balance looks okay.
Just add some other batteries for extra weight if you want to, it flies a long time.
Just got one and had question.
You mention motor torque will turn the aircraft, can that be tuned out with washers at the motor?
Thanks, can't wait to try it. I know it will have a learning curve.
Thanks for the videos.
Found the radio set up video. Need to get the battery to get the programming figured out. I guess trimming the wing before first flight is just get the wing to stay centered over the motor while kiting by adjusting the brake lines?
I actually have taken mine on my motorcycle!
Great setup video for the paramotor and radio. I got my paramotor from Hong Kong on Thursday. Had already been working on radio setup and bound my Spektrum DX8 to it. All the functions working properly including being able to trim it. The problem I had was the motor didn't initiate. Contacted HobbyKing through website chat and a new ESC and Motor were shipped to me yesterday. Great support for their products. Also noticed they are sold out of the paramotors. Guess I'd say, that if ya watch enough videos that are out there guys, you should be able to figure it out. I'd be happy to help anyone with theirs.
Can you share the file for your DX8?
Tried to put it on here. No luck. Post email and I will send it to you.
My email is on my TH-cam channel under about section. Will send you the SPM file from my DX8.
I had the same problem with the motor and speed control. I did some testing and determined that the problem was with the speed controller. For this ESC you HAVE to have the throttle trim tabs all of the way down (off) before it will initiate. Once I figured this out, everything worked fine.
@@johnkunkel988 I used this and it worked great!
hackermotorusa.com/shop/rc-paragliders/parts/para-rc-mix/
I m new on rc paraglider my glider is neon yello from pulver Technik and are another parts black glossy motor is a Roxy for planes for 2kg, have are a mixer for this servos and light bar for lightning for the parafoil and blue stripe for the propring 6 kanal from sky master gigaprop
boas dicas john ,to a começar agora a voar .
I would like to ask if anyone has a remote control simulator that can be used by the remote control model player.
Hi dear , can we set radio , as we used to fly delta wing plane ??
In flying, I understand that the throttle controls engine speed which controls altitude.
The rudder controls turns and the aileron, elevator is just for flairing/landing?
Basically
John, I read you could post a link to your SPM file, would you share that with me for my iX20 radio?
I have an older. DX6i and I do not have the graph that your Xmtr shows, hence I do not have braking. The servos work left or right but not together. What setting needs to be there for braking? Also, some videos show the throttle stick in the middle and going up to control the motor. My stick is at the bottom. Is there a setting for this as well.
20:45
Thanks John !!
Repeating but .. - you, Robert and RC Air Adventures are guilty when my wife start to ask questions - I took the bullet and ordered one ..
Watched all videos from all of you - to other videos will simply click thumbs up and one more thanks ..
Thanks buddy!
Is the diameter of the propeller really 10" (i.e. 254mm)? Would you be able to tell me the length (front to back) and width (how wide the properller guard) of this trike please? I would like to get one, but need to know if I can fit in to the container I have to store it. Thank you.
I watched several videos on attaching the wing to gondola and they differ. The HK manual does not go into attaching the wing and refers to the video. The HK video shows marking a spot on the brake lines 25.5 inches from the top attachment point. At that mark, it is now attached to the control horns. On other videos, like tis one, it shows the mark on the brake lines is to be even with the "D" rings. Which is the correct way? Thanks
Im flying mine this way, setup from how HK wanted me to. Thats all I can tell you, is it works.
@@JohnVHRC I changed it to the way you have it also. Would you happen to have a setup file for a Spektrum NX10? Thanks!
@@Denny_H I dont, sorry
Hi I have an IX12 spektrum and I can not seem to tune it on my paramotor. Can you help me?
Olá John, lindo vôo parabéns eu também vôo com paraglider RC.
Thanks!
Hello
The idea looks goo?
What is the flight time?
Does it get tangled?
Is it easy to launch?
Is it really worth buying?
I love mine, Flight times you can see in the flight videos I have. Its a very fair weather machine, and takes some practice to learn how to launch right, but its very fun.
I was going to buy this as a birthday pressie to myself from my girls! Having watched this ? .... you’ve put me right off. I’m not a novice to flight and models, in my teens I flew a few Parafoil and quadrofoil kites so I have a good understanding of the physics and control of kites and aircraft too. But I had assumed that the kite would be RTF? Thankyou very much for this video as you’ve saved me from buying what I thought was an interesting model... turns out? It’s a knot fest!!! Bugger that!!
Missed a good model once mastered as for knots never had one
Which Receiver are you using?
Thanks
Receiver I used: amzn.to/2XolsS8
Thank you for posting this set up video...I have a complete understanding as to what I want to achieve, with regards to set up. Problem is...I have a Spektrum DX8 and cannot figure out the mixing. Possibly the radio can't do it! Please help if you have any suggestions or can link me to someone who has figured out the proper Mixes for a DX8. Thanks in advance for any help you can provide. Much appreciated. Scott C.
Im sure it can if I can do it on a DX6, did you look at my radio program video?
I will send you the SPM file from my DX 8. Email is on my TH-cam channel
John, I am trying to get my HK Paramotor programmed on my Spektrum DX9 transmitter.
I tried a lot of the mixes and settings I saw on TH-cam, but I could not get any of them to work correctly.
I just purchased a Hacker mixer and I thought this would solve my problems, but it did not.
Is there any place I can find out how to program this radio to work with or without the Hacker mixer?
Any help wil be much appreciated.
Check the rcgroups thread on this ppg
Can you post DX6 mix setup radio ?
Its pretty much the same, doing the mixes, and adjusting the travels so you dont get any opposite UP movements.
Quanto custa um desses ? Envia para o Brasil?
Link in description
Where can I buy this kit from all I need is the seat and control not the paraglider.???
Link in the description. It will tell you what you need
What are the wind speeds you have flown in? Appeared gusty in the short flight.
The lower has been more fun. I dont measure the wind, but Ill guess saying 5mph or less.
Cool video I have h king belatrike nice airglider mfg from Germany 🇩🇪
Sir this moter is of how many KV .plese reply me sir🙏
Not sure, check their website bit.ly/2WbPWtz
@@JohnVHRC ok sir and thanks for reply
1400kv
Gostaria de comprar um como faço ?
Links in the description.
Im picking one of these up so is there any way you can do an in depth tutorial on how to do the radio setup?
I honestly showed enough to do it, set your travels, do the mixes, dont put the arms on until after doing all the mixes though, first make sure everything goes the right direction. Its not too difficult to get to work.
@@JohnVHRC Some of us do need a step by step tutorial, I don't understand how you got to where you are.
Yes , you missed the most importan part the radio set up, please do a tutorial.of the mix.
I have a question. Is a 3 cell 5200 good? Or is it to heavy?
That would work
does the wing come with the trike or does it have to be ordered separately?
Its what you see in the video.
is come together correct?
53/5000
what length have you taken and from where to where?
Take lines? I show how to set them up in this video.
@@JohnVHRC How many inches are that?
@12:20 the video says 25.5
@@JohnVHRC Thanks!
Was it hard to keep the wing untagled
And also couldn’t you just do an elevon setup?
If you dont take it off the cart, you cant really tangle it. I find it pretty easy to keep the lines straight.
Elevons, I dont know, this is how I got it to work out.
Saw this today. Went to H King. Sold out. Well crap.
Bummer, itll be back!
Expecting supplies in November
@@Iflyanythin wow, that's a long wait and it'll be winter here.
Eric best time get that camera footage
Should have just used AUX1 and made it ALE 2 and your set
Maybe, but what I did flies it great too.
BELA MAQUINA
Too bad these are not in stock and only from china. Looks fun
It is alot of fun
needs a pilot - it looks as if he baled out !!