Professional painters can appreciate how effective this actually was... I professionally painted for years and around several great painters and can appreciate the very inexpensive results here and the ease involved...thumbs up on this one for sure!
2k clear please. For those of us looking to have a longer lasting coat. I think warming the cans prior to laying a cost down will help with reducing the orange peel effect. The prep is obviously the biggest factor in getting a decent job with spray cans. It will. Always come down to time spent before and after with the rattle can job. But you can achieve a good paint job. The 2k clear will help it last, but again you're going to have to put the work in to make it smooth and presentable. Thank you for taking the time to put this video together.
@@theshark2804Hey man. I’m planning on using the turbo can on my old civic this week. Do you have a recommendation on the exact brand of clear coat to use
I use to do rattle can paint jobs on my 52 ford pickup. Back when we had truck auto paint in cans. No clear coat required fan spray like a paint gun and only 4.99 a can. Last for years. Aw the good old days
Thanks for taking the time to show us about this paint ! The local body shop wanted 9 thousand to paint my 4 door 86 Cutlass, wow! I'm 67 years old and remember how it was like everything else....My plans are flat black Turbo spray, matte finish should be more forgiving...excellent video, just like your my neighbor walk down the block and showing me in person. Subscribed ......!
Thank you for sharing. I want to learn to paint so bad. I'm a Disabled Vet. and I would really love to be able to supplement my (embarrassingly low income LOL) by painting I have been into cars since I was a teen and here I am now at 52 years old and still have a genuine interest in cars and racing Ive built drag cars and raced them My disability will not affect my ability to do the job I hope The only way to know for sure is to just try. I'm sure I would be much slower than most people but I don't see that as a bad thing. I mean to be able to step back and look at your project and know that I took this car from basically a piece of crap to something you can really be proud of. I mean the satisfaction you must feel from a job well done is a feeling I have not felt in a very long time. Again Thank you for sharing your gift with us
First off, thank you very much for your service!!!! I can under stand wanting to start a lil side hustle! I love to see people wanting to learn a new trade, Painting and body work is not that hard to learn as long as you know a few steps. As for you being slower than most, you'll be better off. Most people are all ways in a hurry and hurry is the down fall to great body work.Body work has helped me through some tough times, being laid off several times you can make some good side money. Actually you can make as much as you want to lol. I'm planning on starting a new video seris taking a pannel from dented to sanded and buffed with all the info you'll need to pull ut off! Make sure to subscribe so you'll get the notification. Also go over to my website and subscribe to my email list and ill shoot out the notification there.www.acdesignsgarage.com, if you have anymore questions you can email me there or comment here, thanks for the support God Bless!!!
Thank you for not rushing through. We need to hear about taping and the right type of materials. When I get to this point I want to try this type of paint job.
Super nice coming out of a paint can!!! I am going out to by can of this stuff for my next project. Thanks for showing me this product, and explaining it...
It would be cool if you did one side like this with a cut and buff then the other bedside one coat with 2k clear. Then do monthly reviews until you build the truck. Would make a great comparison.
I've used this on my hunting truck and a couple of friend's hunting vehicles also...my nickels worth of free advice..two coats,with the first coat being very light with only a 25% overlay..second coat a little heavier(walking the vehicle) with at least 50% overlay(no more than 16 inches away either coat..just slow your walk a little on the second).Leaves very little "orange peel" or runs. Those Turbo cans really dump it out! lol On my truck I did do a good sanding first and "pre painted" the gaps and hard to reach areas with a regular spray can because those areas tend to run with the Turbos,due to paint build up.I only wish RustoLeum made it in more colors! (I do have painting experience from my younger years)
That was funny, I always say fungus amongus 😂. Great video and I've watched a couple with this can and I just cannot believe how wide that spray pattern is and how fast it covers. They are definitely onto something especially for people on a budget and want to save a few bucks and get a job done quicker.
The first coat looked really good if it was covered to the point that you could not be able to see it I would have liked how shiny it was. I'm a fan of red though, I hope you have a great day and enjoy your weekend. God bless you and your family also.
Yeah I loved the first coat, then I steped back and saw light spots so I had to do another. That stuff does not like 2 coats lol thanks for watching, yall have a Blessed day 🙏
@@ACDesignsGarage in my experience the 2nd coat problems normally are due to the time between coats. Either painting the 2 coat too soon or waiting too long. If doing it the same day. My best pain job, I waited 7-10 day between each coat . Project took a month 3 coats and a gloss coat.
Im enjoying all your content including the dialog. I like you use music in your videos sparingly. Its like hanging out with an Uncle. Years later you realized you learned alot
In cases like that I found it letting the first coat dry, completely second coat move to spray can faster very fast and just fogging on to its damp I got some good results from that it's just a suggestion bro but you did good man
I remember when I was about 14 i spray painted my bike and it flaked like crazy I didn’t know about the sanding to make the color stick I just painted over the clear coat
Good evening sir Im from Texas u mentioned u were in Texas im in Grand Prairie just outside of Dallas wondering if u could recommend anybody that wont charge me an arm and leg but does honest work as yourself its a1995 chevy silverado single cab great condition!? Enjoyed the vid especially the love and attention to detail for ur craft..God Bless!!
Great tips as always, man. Love the channel. Turbo cans are great. If Rusto ever gets them to spray as finely as regular cans, then they'll really be a game changer. Also, I'm glad you gave the tips about spraying rattle cans and going heavier. My stuff would come out dusty and streaky when I did light coats. Gotta be like a graffiti artist and coat it fully, runs be damned. Be well.
Hahaha thank you, I 100% agree if they would use a smaller hole in the tip where it would be a finer mist, they would be perfect!!!! Thanks for watching!!!
It goes live at 7pm est today, If you use the turbo id hold it back about 15 inches away so you dont get as bad of orange peel as I did, just a lil helpful tip maybe save you some time sanding!!!! Were gonna do clear coat next week!!!
Pretty dang nice on the 1st coat. But, seeing it is only Enamel paint, what's the plan to seal it up ( clear coat ? ) to make it as hard & long lasting as Urethane paint ?
I thoroughly enjoyed your video. All kinds of tips and tricks learned. Would like to see you add a couple layers of clear coat now. I have a question though. If you were to clear coat over the paint at this point (with all of the orange peel), would you have to sand the paint first, or will the clear hide the orange peel? Thanks again for the video. You've made a subscriber out of me.
Thank you for watching!! I usually sand it flat with 600 wet after it dried real good and it will lay out pretty slick, a good high solids clear will fill pretty good but you still need to sand it so it will adhere. Yhis weeks video is gonna be wet sand and buffing the pannel, then next week im gonna scuff it then were gonna use the spraymax spray paint 2k clear and make it look like a show car "hopefully " lol. I want to make several lessons so I can help as many people as possible!!!!
Well I'm glad you tested it so therefore I will know to try to make one good passing without running the paint because if I try to make a second passing it's going to Orange Peel like crazy thank you for your video and your info do appreciate it 👍
I lay rattle can early in the morning sunrise 6am when its nice and cool, 4 coats at 5 mins between each coat and get mirror finish. I never clear because i change the paint every year for fun, rustoleum stays shiny for 1yr before it begins to fade away.
Hey, thanks man. I’ve been looking for channel that could show me the basics of stuff. I did the bodywork on my truck. Surprise me how Well it looks. I am getting ready to paint but I’m a little unsure on what would be the best primer to set up the paint,so the paint don’t peel off because I use the wrong primer.
If there is alot of bare steel, I'd use an epoxy primer, if it's just paint and body work you can't go wrong with a 2k primer filler. It builds up pretty thick and will help fill in small imperfections.
@@ACDesignsGarage thanks man. I have a light coat primer over at the moment. Keep it from rusting but I was planning on sanding that off so that helps me out. I appreciate that.
That's pretty cool he welded a Sawzall blade to that sheet metal years ago I took a Sawzall blade drilled 2 holes in it screwed it to aluminum drink / bottle holder intended for a bicycle. Then used a hose clamp with the plastic wing nut on it to tightin it on the can so it don't go flying as soon as you hit the button on the saw but be prepared for your arms to itch an tingle after using it cause it will shake your blood around in them veins of yours 😆
I'LL GI YOU A THUMBS UP I MADE MY LIVING AS A UTO PAINTER made a good living 53:16 it's not easy painting at home good job im retired now because of throat cancer be safe & keep up the good work
I've been waiting for them to come out with a spray can that does this now they need to come out with a kit of tips that can be changed for the spray you want. I think it does a pretty good job for a can
Rust-oleum has a 5 in 1 can that you can dial different spray patterns. Kevin Tetz from Paintucation used that to rattle can a bike tank in one of his videos.
That would be a game changer if they would come with assorted spray nozzles. To see which nozzle the customer would prefer. The fan spray on a regular spray can is not big enough. If they would have a nozzle, in between the regular & the turbo that would be great!
I have chrome i want to get rid of, and some surface rust how do i proceed with this? Would love to hear your opinion and your paint job came out amazing 🤘🏽
Thank you!!! I would probably sand it down with 80 grit till there are no flaks and rust. Then get you some direct to metal epoxy primer, as soon as that tacs put 3 coats of high build primer and let that dry. Then block it with 180 till flat then 320 grit , then finish up with 400 wet then paint. She'll look like glass lol
Thank you, it's fun to use to hahahaha I have some going up on my website again this week www.acdesignsgarage.com, I'm slow because I'm the only one making them hahahaha
Amazing job.Have been working with cars since 1985,but have never seen such a good result with a spraybox.Unfortunately that paint can't probably not been ordered to Europe,due to our stupid laws..Thanks for the video👍
That may be a little coarse its like 350 grit, I would suggest 600 to 800 if your just shooting clear, if your shooting a solid color base then clear you can use the red scotch brite. If you have a pratice place to do it try it out, it may work, im just not 100% positive!!!
Yes I'd take it down to bare metal and go little past the area then epoxy prime or etch prime the bare metal, scuff that then shoot a highbuild sandals primer on that ,then scuff then paint
@@ACDesignsGarage PFS is one of my favorites! I watched most of his videos , there's a few others i watch, just wish I didn't have such bad arthritis in my hands! I can't do much mechanical work now, a few years back I did a lot of work on my OBS Suburban, the paint was shot! So I sanded it primed and painted and clear coated it with the small rattle cans ! Turned out really good ! But just wore my old hands out!
Holy sh$t! Please excuse the language but that first pass was simply amazing. Unbelievable actually. Thanks for sharing. Can’t believe a rattle can produced such good results and as always thanks for sharing your skills and expertise. -- clear --
I think they took out the fish oil is what I heard. I shot some 2k clear over the turbo can this week and buffed it and its SLICK!!! It goes live on the 24th at 8 pm est.
As i always say you paint professionally or pay someone professionally only because you like the talent and or the art but almost never to make a profit. In most cases spray paint is good enough to protect and look to the average person without spending money. Cars lose values over time unless it’s Jay Leno. are or an Italian car
@@ACDesignsGarage yeah, i just tried with the Canadian version, the tremclad, couple runs, but it turned out okay..humidity has been between 75 to 95 as well
Yes here Isa video where I did that, also I have one where I 2k cleared over the turbo and buffed it for super shiny finish! th-cam.com/video/fqGtOnILqwc/w-d-xo.htmlsi=73pjyiS8q4NhnJcA
With a 2k spraymax clear I think it will hold up pretty well as long as it has UV in it. Now just bare gloss black turbo can will hold up about 6 months till it starts to fade but it will buff out!!
so what if you waited a few days and then do the second coat? Would it still orange peel? How about doing 1/2 of the bed side cut and buff and half with the clear coat.
Thats a great idea, I think im gonna wet sand and buff this week and clear it next week. Ive been thinking that the reason it peeled so bad was the pressure must of dropped a little because it was running out of paint. Usually if you let it tac up and spray with normal cans the second coat looks a good as the first. What ive found that causes peel is low pressure and too much fluid!!
Spray can painting has come a long way to when they first came on the market All these spray with some Prefect should be able to get the factory finnishy
Professional painters can appreciate how effective this actually was... I professionally painted for years and around several great painters and can appreciate the very inexpensive results here and the ease involved...thumbs up on this one for sure!
Thank you for watching!!!
2k clear please. For those of us looking to have a longer lasting coat.
I think warming the cans prior to laying a cost down will help with reducing the orange peel effect. The prep is obviously the biggest factor in getting a decent job with spray cans.
It will. Always come down to time spent before and after with the rattle can job. But you can achieve a good paint job.
The 2k clear will help it last, but again you're going to have to put the work in to make it smooth and presentable.
Thank you for taking the time to put this video together.
Thank you, im shooting for this week on the 2k alot depends on the weather, thanks for the tips and for watching!!!!
Ive had bad results with 2k over rattle can.
@@theshark2804Hey man. I’m planning on using the turbo can on my old civic this week. Do you have a recommendation on the exact brand of clear coat to use
@@thomasworley1397 i dont. But might want to test a small area 1st
I use to do rattle can paint jobs on my 52 ford pickup. Back when we had truck auto paint in cans. No clear coat required fan spray like a paint gun and only 4.99 a can. Last for years. Aw the good old days
Thanks for taking the time to show us about this paint ! The local body shop wanted 9 thousand to paint my 4 door 86 Cutlass, wow! I'm 67 years old and remember how it was like everything else....My plans are flat black Turbo spray, matte finish should be more forgiving...excellent video, just like your my neighbor walk down the block and showing me in person. Subscribed ......!
Thank you very much for watching, so glad I could help. Good luck on your cutlass, I love that body style!!
I’m sure this process would be a little easier if I can understand what this gentleman is saying
Years ago, my dad, brother-in-law and I painted a ‘51 International long bed step side pickup with spray cans. It turned out great!
I think its cool to be able to paint with spray cans, I've painted with 1500.00 spray guns and it's not as fun lol
Thank you for sharing. I want to learn to paint so bad. I'm a Disabled Vet. and I would really love to be able to supplement my (embarrassingly low income LOL) by painting I have been into cars since I was a teen and here I am now at 52 years old and still have a genuine interest in cars and racing Ive built drag cars and raced them My disability will not affect my ability to do the job I hope The only way to know for sure is to just try. I'm sure I would be much slower than most people but I don't see that as a bad thing. I mean to be able to step back and look at your project and know that I took this car from basically a piece of crap to something you can really be proud of. I mean the satisfaction you must feel from a job well done is a feeling I have not felt in a very long time. Again Thank you for sharing your gift with us
First off, thank you very much for your service!!!! I can under stand wanting to start a lil side hustle! I love to see people wanting to learn a new trade, Painting and body work is not that hard to learn as long as you know a few steps. As for you being slower than most, you'll be better off. Most people are all ways in a hurry and hurry is the down fall to great body work.Body work has helped me through some tough times, being laid off several times you can make some good side money. Actually you can make as much as you want to lol. I'm planning on starting a new video seris taking a pannel from dented to sanded and buffed with all the info you'll need to pull ut off! Make sure to subscribe so you'll get the notification. Also go over to my website and subscribe to my email list and ill shoot out the notification there.www.acdesignsgarage.com, if you have anymore questions you can email me there or comment here, thanks for the support God Bless!!!
Thank you for not rushing through. We need to hear about taping and the right type of materials. When I get to this point I want to try this type of paint job.
Thank you, I enjoy sharing what took 20 years to learn and sharing with friends!!!!
Painted my car with rust olem turbo used the white was supprised the way it turned out showed it to a few friends they couldnt believe it
I bet it looked awesome!
I can remember seeing factory paint jobs from late 50's to early 60's that didn't look any better then what you've done here!!
Hahaha thank you, were gonna make it look better this week!!!
You must have dementia
It is kinda cool bro!! And I definitely want to buy 2 can shakers that's brilliant!! Nice invention!!
Super nice coming out of a paint can!!! I am going out to by can of this stuff for my next project. Thanks for showing me this product, and explaining it...
Thank you for watching!!!!!
It would be cool if you did one side like this with a cut and buff then the other bedside one coat with 2k clear. Then do monthly reviews until you build the truck. Would make a great comparison.
Thats a great idea, i may try that!!!!
I second this also!
Thanks for sharing your tips and tricks with us! This gives me a lot of ideas for some paint jobs I see in my future.
Thanks for watching, glad it helped
Love your teaching, so down to earth, no big fancy detail, sir your awesome
Thank you very much!!!
I've used this on my hunting truck and a couple of friend's hunting vehicles also...my nickels worth of free advice..two coats,with the first coat being very light with only a 25% overlay..second coat a little heavier(walking the vehicle) with at least 50% overlay(no more than 16 inches away either coat..just slow your walk a little on the second).Leaves very little "orange peel" or runs. Those Turbo cans really dump it out! lol On my truck I did do a good sanding first and "pre painted" the gaps and hard to reach areas with a regular spray can because those areas tend to run with the Turbos,due to paint build up.I only wish RustoLeum made it in more colors! (I do have painting experience from my younger years)
Thank you for the tip!!
They make a 1k turbo clear. It holds the gloss and lasts decent. Ive used the white on a delivery truck about 4 years ago.
Awesome I haven't seen that yet in my area!
I think this is a pretty good paint job, especially since it was done in an outdoor backyard.
Thank you!!!!!
Thanks for the great video. You are a very good teacher, we appreciate it, God bless 🙌
Thank you very much, hope you have a Blessed day!!!!
I love the step-by-step the way you did everything I will be attempting to paint my truck just the way you did
Awesome thank you, good luck!!
That was funny, I always say fungus amongus 😂. Great video and I've watched a couple with this can and I just cannot believe how wide that spray pattern is and how fast it covers. They are definitely onto something especially for people on a budget and want to save a few bucks and get a job done quicker.
Hahaha there pretty awesome, thank you for watching!!!
The first coat looked really good if it was covered to the point that you could not be able to see it I would have liked how shiny it was. I'm a fan of red though, I hope you have a great day and enjoy your weekend. God bless you and your family also.
Yeah I loved the first coat, then I steped back and saw light spots so I had to do another. That stuff does not like 2 coats lol thanks for watching, yall have a Blessed day 🙏
@@ACDesignsGarage Have a great Sunday
@@ACDesignsGarage in my experience the 2nd coat problems normally are due to the time between coats. Either painting the 2 coat too soon or waiting too long. If doing it the same day. My best pain job, I waited 7-10 day between each coat . Project took a month 3 coats and a gloss coat.
Im enjoying all your content including the dialog. I like you use music in your videos sparingly. Its like hanging out with an Uncle. Years later you realized you learned alot
I really appreciate that!!!!!
Lol ! Your spray can Shaker is so awesome! 😃
Hahahaha thank you!!!!
Bro you're awesome the clear directions and a little humor in there as well 😁. I'm going to try this
Hahaha thank you, it's pretty amazing how it turns out!!!!
BROTHERRR THAT SHAKE 4 THOUSAND IS STUPID GOOD I LOVE IT
Awesome Thank you!!!!!
You would've gotten way less orange peel if you had placed the paint can in a bucket of hot water for about 10 minutes.
I need to try that thanks!!!
Don't go blaming me for your tinkering.....glad ya decided to film and post it tho ....😊
Talk about highly intellectual n simultaneously pro's keep on going . . .
Thank you!!!
In cases like that I found it letting the first coat dry, completely second coat move to spray can faster very fast and just fogging on to its damp I got some good results from that it's just a suggestion bro but you did good man
Thanks man, ill try that!!!
Would like to see videos of you cutting and buffing spray paint
Here it is I hope it helps !!! th-cam.com/video/fqGtOnILqwc/w-d-xo.htmlsi=gWPY8DxdTaIXlOMX
Wow.. I'm fixing a truck that was gifted to me and saw those cans in the store. That thing is crazy.
There pretty fun to use!!!
Hell yeah, lets see the color sand and buff !!
I remember when I was about 14 i spray painted my bike and it flaked like crazy I didn’t know about the sanding to make the color stick I just painted over the clear coat
I use to do the same thing. They have some awesome flake in the can now!!!
Yes would like to see the color buff and sand portion as well.
Thanks, I've made some on here if you want to check them out, Check out my how to paint your car at home playlist!!
Good evening sir Im from Texas u mentioned u were in Texas im in Grand Prairie just outside of Dallas wondering if u could recommend anybody that wont charge me an arm and leg but does honest work as yourself its a1995 chevy silverado single cab great condition!? Enjoyed the vid especially the love and attention to detail for ur craft..God Bless!!
Thank you, I live in NC but I was in Austin back in April for the lone star round up
Great tips as always, man. Love the channel. Turbo cans are great. If Rusto ever gets them to spray as finely as regular cans, then they'll really be a game changer. Also, I'm glad you gave the tips about spraying rattle cans and going heavier. My stuff would come out dusty and streaky when I did light coats. Gotta be like a graffiti artist and coat it fully, runs be damned. Be well.
Hahaha thank you, I 100% agree if they would use a smaller hole in the tip where it would be a finer mist, they would be perfect!!!! Thanks for watching!!!
THANKS FOR THE TIPS AND VIDEO!!!!,, FIRST TIME WATCHING.. PEACE!!
Thank you for watching!!!
Waiting for the cut and buff video. I'm ready with the turbo cans and all the supplies to do a foxbody hood and doors.
It goes live at 7pm est today, If you use the turbo id hold it back about 15 inches away so you dont get as bad of orange peel as I did, just a lil helpful tip maybe save you some time sanding!!!! Were gonna do clear coat next week!!!
Pretty dang nice on the 1st coat. But, seeing it is only Enamel paint, what's the plan to seal it up ( clear coat ? ) to make it as hard & long lasting as Urethane paint ?
Yes I have a video on applying 2k clear and wet sand and buffed like a show car!!!
@@ACDesignsGarage very cool !
Awesomeness, thanks for the tips and video! GOD Bless ! 😇👍🏼
Thank you very much, have a Blessed day!!!!!!
Great video! Looking forward to cut buff and clear coat.
Thank you, the cut and buff will be this weekends video, just shot it!!!
I thoroughly enjoyed your video. All kinds of tips and tricks learned. Would like to see you add a couple layers of clear coat now. I have a question though. If you were to clear coat over the paint at this point (with all of the orange peel), would you have to sand the paint first, or will the clear hide the orange peel? Thanks again for the video. You've made a subscriber out of me.
Thank you for watching!! I usually sand it flat with 600 wet after it dried real good and it will lay out pretty slick, a good high solids clear will fill pretty good but you still need to sand it so it will adhere. Yhis weeks video is gonna be wet sand and buffing the pannel, then next week im gonna scuff it then were gonna use the spraymax spray paint 2k clear and make it look like a show car "hopefully " lol. I want to make several lessons so I can help as many people as possible!!!!
Straight to the point. Thank you!!
Thank you for watching!!!
Well I'm glad you tested it so therefore I will know to try to make one good passing without running the paint because if I try to make a second passing it's going to Orange Peel like crazy thank you for your video and your info do appreciate it 👍
Thank you, I think if I'd of held the can back a lil futher it probably would of been a lil smother!!!
Thanks for the video. That came out looking great! Very cool Sir. I'm going to give it a shot on my Subaru.
Awesome thank you for watching!!
I lay rattle can early in the morning sunrise 6am when its nice and cool, 4 coats at 5 mins between each coat and get mirror finish. I never clear because i change the paint every year for fun, rustoleum stays shiny for 1yr before it begins to fade away.
I will say the early morning is the tip for bugs and being cooler!!!
Hey, thanks man. I’ve been looking for channel that could show me the basics of stuff. I did the bodywork on my truck. Surprise me how Well it looks. I am getting ready to paint but I’m a little unsure on what would be the best primer to set up the paint,so the paint don’t peel off because I use the wrong primer.
If there is alot of bare steel, I'd use an epoxy primer, if it's just paint and body work you can't go wrong with a 2k primer filler. It builds up pretty thick and will help fill in small imperfections.
@@ACDesignsGarage thanks man. I have a light coat primer over at the moment. Keep it from rusting but I was planning on sanding that off so that helps me out. I appreciate that.
That was cool dude I remember back in the day paint jobs didn’t look that good
Thank you!!!!
After sanding, would it be better to add a layer of primer, then paint. Or just paint right after sanding. Thanks
It would be, If it was base clear job I would shoot a coat of sealer before the base to seal it up!!!
That's pretty cool he welded a Sawzall blade to that sheet metal years ago I took a Sawzall blade drilled 2 holes in it screwed it to aluminum drink / bottle holder intended for a bicycle. Then used a hose clamp with the plastic wing nut on it to tightin it on the can so it don't go flying as soon as you hit the button on the saw but be prepared for your arms to itch an tingle after using it cause it will shake your blood around in them veins of yours 😆
Man thats awesome idea, i made a video on building one from scratch a few weeks ago, that bottle idea is brilliant!!!
Are you able to let it dry. Wet sand it smooth. Then apply a few coats of 2k clear? If so it could look super nice and last a long time.
Yes you can just make sure its completely hardened. I only had time to do it in one day!!!
I'LL GI YOU A THUMBS UP I MADE MY LIVING AS A UTO PAINTER made a good living 53:16 it's not easy painting at home good job im retired now because of throat cancer be safe & keep up the good work
Thank you, it means alot comming from a fellow painter!!! I'll be praying for you, hope you have a Blessed day!!!!!
Use that as your base coat, send it down a little and clear coat it and then repeat, and the warmer the weather the flatter the paint will dry
Thanks for the tip. Check out my video where I 2k clear it and cut and buff. I was amazed how it turned out!!!!
I've been waiting for them to come out with a spray can that does this now they need to come out with a kit of tips that can be changed for the spray you want. I think it does a pretty good job for a can
That would be awesome if they had different tips!!!!
Rust-oleum has a 5 in 1 can that you can dial different spray patterns. Kevin Tetz from Paintucation used that to rattle can a bike tank in one of his videos.
That would be a game changer if they would come with assorted spray nozzles. To see which nozzle the customer would prefer. The fan spray on a regular spray can is not big enough. If they would have a nozzle, in between the regular & the turbo that would be great!
The 5 in 1 spray can works great. But still should have a little bit bigger fan on it. But the fan on the 5 & 1 can is descent!
Could you ruff up clear coat with the red scotch bright and then just re-clear it or would all the clear have to come off first?
I have chrome i want to get rid of, and some surface rust how do i proceed with this? Would love to hear your opinion and your paint job came out amazing 🤘🏽
Thank you!!! I would probably sand it down with 80 grit till there are no flaks and rust. Then get you some direct to metal epoxy primer, as soon as that tacs put 3 coats of high build primer and let that dry. Then block it with 180 till flat then 320 grit , then finish up with 400 wet then paint. She'll look like glass lol
so are you spraying over the clear coat?
Most painters use what's called sealer to lock down anything that is going to cause solvent pops adhesion problems etc
Thanks for the tips! Also, thanks for watching!
Great Video, Thanks for the great tips.
Thank you for watching!!!!
bro, that shaker contraption is bad ass!
Thank you, it's fun to use to hahahaha I have some going up on my website again this week www.acdesignsgarage.com, I'm slow because I'm the only one making them hahahaha
that was a lot of work to show us how to do that, thank you for that
Thanks for watching, I shot the cut and buff video this week it turned out awesome, like glass, it will go up Friday or Saturday this week!!
How long those it take to dry the paint. 🎨
All the way through probably a couple days. One easy way to check is to stick your finger nail in in a hidden spot. When it's dry it should be hard.
Amazing job.Have been working with cars since 1985,but have never seen such a good result with a spraybox.Unfortunately that paint can't probably not been ordered to Europe,due to our stupid laws..Thanks for the video👍
Man that stinks, can you get the regular smaller cans? I'm gonna do a video with them soon and we're gonna strive to make it show car quality!!!
You never seen it cause knowbody would be that stupid to put it on anytbing
What???
Great work, can I use the Red Scotch Brite to prep surface for clear coat only?
That may be a little coarse its like 350 grit, I would suggest 600 to 800 if your just shooting clear, if your shooting a solid color base then clear you can use the red scotch brite. If you have a pratice place to do it try it out, it may work, im just not 100% positive!!!
@@ACDesignsGarage Many painters on YT saying to use 320-400 grit for best paint adhesion, the higher the grit the higher the chance of delamination..
Rustolum clear in turbo please, I’m failing with mine
Have you done the buff job yet? Waiting on that video
I like your paint shaker. Version 2.0 could use a thumb screw style hose clamp.
Thanks I was thinkin the same thing!!! Im gonna make a small run of them for my website if anyone wants one, hope to have them up by may 6th.
I wonder how well and how long that will hold up to the sun and elements?
We are aerosol spray paint manufacturer from china.are you looking for aerosol spray spray paint?
A month Later it still looks as good as day day 1
I had the same thing issues! These. Turbo cans. Take some getting use to.
That's for sure, but there fun lol
love this pretty cool paint
Thank you!!!!!
I will !! 1969 gmc truck I will let you know how it turns out thanks man !
Awesome!!!!
If you store your paper in the clean room you won't have as much cleaning 🧹 to do but the cleaning part is the part that makes it or breaks it.
I agree!!!
Warm you can up with warm water before spraying
What if you have some surface rust? Would you have to take that down to bare metal or how would you handle that?
Yes I'd take it down to bare metal and go little past the area then epoxy prime or etch prime the bare metal, scuff that then shoot a highbuild sandals primer on that ,then scuff then paint
I like that. I know now what I'm going to do to my old 83 F100, as far as painting it.
Black it is....will be. 😂
Awesome I love those years of those trucks!!!
curious, how much did it cost in all?
Paint was around $30.00
Of i ever paint another car or truck im getting that sawzaw attachment to sgake the spray cans! 👍 First saw one on Puddins Fab Shop !
I'm building a fresh batch this week. I love watching @puddinsfabshop!!
@@ACDesignsGarage PFS is one of my favorites! I watched most of his videos , there's a few others i watch, just wish I didn't have such bad arthritis in my hands! I can't do much mechanical work now, a few years back I did a lot of work on my OBS Suburban, the paint was shot! So I sanded it primed and painted and clear coated it with the small rattle cans ! Turned out really good ! But just wore my old hands out!
Duct tape can to a long blade if you are hard up.
Like you a lot. Love your hustle.
Thank you very much!!!!
35 minutes. No paint. Spray it damn it!!!
Hahaha just fast foward
Did you use gloss black ?
Yes
What would it look like with a 2k clear like spraymax? Like to see that.
I thought about trying that this week instead of color sanding?
Holy sh$t! Please excuse the language but that first pass was simply amazing. Unbelievable actually. Thanks for sharing. Can’t believe a rattle can produced such good results and as always thanks for sharing your skills and expertise. -- clear --
Hahahaha yeah when I put the 2nd coat I was like Crap!!!!! But it needed it to sand down. I sprayed that first coat and it was awesome 👌
Very impressive spray coverage for a can, dumps the paint on it
She dumps it for sure lol!!!!
I have always heard that Rust o Leum contains a "ALlKYD" or fish oil which is not compatible with other paints causing other paints to lift.
I think they took out the fish oil is what I heard. I shot some 2k clear over the turbo can this week and buffed it and its SLICK!!! It goes live on the 24th at 8 pm est.
When doing body work you always want the sand on a 45 not straight across to keep the sand marks out of your paint job
As i always say you paint professionally or pay someone professionally only because you like the talent and or the art but almost never to make a profit. In most cases spray paint is good enough to protect and look to the average person without spending money. Cars lose values over time unless it’s Jay Leno. are or an Italian car
So helpful... Great video...
Thank you!!!!
Kool video can't wait for the cut & buff are those slotted mags in the bed ???
Yes they are good eye!!!
@@ACDesignsGarage thanks don't get rid of them sir
Jesus, that can lays some paint. I was not expecting it to go down so freaking quick.
It puts it down like a water hose lol, almost comical lol
Wow I'm going to start paint my car today 😳
Awesome, good luck!!!!
Have you tired this since from a further distance? Id imagine youd get less peel holding it back another 6 inch
Yeah, I tried everything I know to do but I think it just dumps a ton of paint lol
@@ACDesignsGarage yeah, i just tried with the Canadian version, the tremclad, couple runs, but it turned out okay..humidity has been between 75 to 95 as well
Paint jobs is expensive I was just trying to get the roof trunk and hood touch up painted at Maaco and the estimate was $1500-$1800
Yes they are. Materials are out the roof!!!
Would be good to see the result of it being flattened out and buffed up. Cheers Chris Bailey
Yes here Isa video where I did that, also I have one where I 2k cleared over the turbo and buffed it for super shiny finish!
th-cam.com/video/fqGtOnILqwc/w-d-xo.htmlsi=73pjyiS8q4NhnJcA
@@ACDesignsGarage Good result with both methods. Regards Chris Bailey
Love your video brother thanks im new to painting.
Thank you for watching, I hope I can Help!!!
I've learned a bunch , thx man
Thank you very much!!!
Would you say that a paint job will last longer the farther north you live? I know paint fails quick in Arizona and New Mexico.
With a 2k spraymax clear I think it will hold up pretty well as long as it has UV in it. Now just bare gloss black turbo can will hold up about 6 months till it starts to fade but it will buff out!!
Try warming up the paint cans in hot water flows better
I got to try that!!!!
so what if you waited a few days and then do the second coat? Would it still orange peel? How about doing 1/2 of the bed side cut and buff and half with the clear coat.
Thats a great idea, I think im gonna wet sand and buff this week and clear it next week. Ive been thinking that the reason it peeled so bad was the pressure must of dropped a little because it was running out of paint. Usually if you let it tac up and spray with normal cans the second coat looks a good as the first. What ive found that causes peel is low pressure and too much fluid!!
I think with a big spray can like that that shoots out a lot you might want to go 8 inches away from it just to give it that perfect paint job
Its definitely a learning curve lol
Spray can painting has come a long way to when they first came on the market All these spray with some Prefect should be able to get the factory finnishy
I buffed that 2k clear today and it was beautiful, that video will be up on Saturday!!
nice job explaining this im bouta do this
Thank you very much!!!
Iam 66 I have a 72 Chevy pick up truck that been in my family since 1973
Man thats pretty cool!!!