ฝัง
- เผยแพร่เมื่อ 11 ธ.ค. 2023
- Today we are accomplishing 2 things
1) house keeping. Clean up the grinder befefore we hwad to the 2nd thing
2) checking burr alignment using a wet marker test.
My cafe Instagram page:
/ askcoffeeroastery
My personal Instagram page:
/ cythecoffeeexplorer
Join my discord to chat more! Coffee or not, it doesn't matter.
/ discord - บันเทิง
I accidentally wiped off the black mark when I first took the burr carrier out...oops.
Don't worry, you just need to do wet marker test on the 3 positions and see which one gives you the best alignment and mark it again.
I received my Gen 2 a week ago - after 4 times postponement because of burr aligning works. Therefore i would say that my burrs should be aligned well now 🙂
That's great news! Enjoy the grinder
That’s pretty brave to dismantle with the risk of scratching this watch 😂
Hahaha...where yare you looking😅
It's not a real Patek so don't think he's too worried.
Do I need to do this every time I clean the grinder? Comparing this Video to the previous one(finding the zero point) what is the different?
Hi CY hope you’re doing well. 👍
Hi Lynda! Yes all is well!
@@CaffeMartellaSingapore good to hear
Hey CY i love your videos and a have a problem with my almost 1 year old DF64 (v4 i guess)
Last time i cleaned it like i always do (once a month) than throw all back together, grind at scale size 15 beans and pulled a espresso, so far so good. The next morning i also grind some beans pull my espresso and instead of 18g coffee-> 36-38gr in 25sec. I get like 30gr coffee in like 10seconds.
Then i opened it, clean it put it back together, grind at size 15 my coffee and all good, then i put another shot again and the same sh*t happend again, after the first grind it get more course.
Do you know what can cause this? Is it maybe the burrs are not good anymore? What i saw when opened it after cleaning and the first grind that some chunks was left on the outside oft the burr lile 2-3mm, so i was thinking that maybe the burrs not aligned and on some spots leaving those chunks? Appreciate your answer and a happy new year!!!
Hi my friend. In my experience with the DF64 gen 1, i have not really encounter grinder where the grind adjustment will run after grinding beans. When you clean your grinder, do you always check your zero point and set your burr touch point? This problem od grind setting becoming coarser only happened recently when you clean your grinder?
@@CaffeMartellaSingapore yes always checking my 0 point and this came right after a cleaning. I will get tomorrow new standart burrs i found them for 30 bucks 😅 i will update how it will be after installing them and this time i will also allign them properly. Thx for your vids and keep going!
Thank you for this Video. I ordered the Gen 2. it will be my first time using a DF or a good grinder respectively.
My question is: do I have to season it? I have read, that some people just buy 1-2 kg of cheap coffe beans and grind it until it is „seasoned“ and the burrs are prepared to grind the good beans. What is your opinion about that?
let me do another video gather some more questions and i will try my best to answer them.
Thank you for doing this! Possibly a stupid qn, but will using a marker introduce toxic substances to the grinder? And is there any non-toxic markets or “food-grade” markers out there? 😅
I am not sure about a food grade marker. If you find out one, do ahare with us!
Why not do this marker trick, shim if necessary, mark the correct top burr carrier position, take the carrier out to clean the burrs and reassemble in the correct position?
Yeah thats a plausible idea. Just a bit more work. But i would advice cleaning with alcohol and dont use water.
Could use a kids crayola non-toxic marker as well
thats a great idea!
this is the only reason I've held off buying any of the DF64 models. you play russian roullette just to see if you get a decently aligned burr set. meaning if you're a normie like me who just wants to buy a grinder and run it, you have a decent chance of getting one that grinds like crap, or one that's PERFECT out of the box...*sigh
nothing at this price range is out of the box perfectly aligned, at least not that i kmow of. But of course if your pocket is deep enough, perhaps you can find something that is perfect out of the box. Even before i check alignment, the df64 gen 2 is already pretty good. I did this alignment test just to share with my fellow friends who may be interested to check how aligned the burrs are in a few simple steps.
And to make it slightly getter than russian roulette, we have 3 tries other than 6? Anyway Merry Christmas my friend!
@@CaffeMartellaSingaporehow big of a change would really well aligned vs. what you have here net you? Meaning for a normie like me who just wants to use it, would it be a large difference grinding my normal coffee un shimmed and calibrated vs. just "letting her rip", or would it simply be an incremental nitpicking difference.
for clarification I'm an espresso snob, but I've stuck with 1zpresso and Kinu hand grinder simply because I stuck with dark roasts, but have been wanting to add some light roast espresso into my rotation so I was looking at 64 mm flats like this.
To be honest, for beginner, one may not tell the difference but a seasoned espresso maker would have notice the raise in difficulty to dial in shots. The taste will be more muddy and less clear. However this is slightly harder unless you hace a well-aligned burrs vs a not so well aligned one.
@@CaffeMartellaSingapore good to know. I'm a snob and fairly well versed in conicals so I'll have to pay attention to alignment
Agreed. Chinese made product. Maybe someone like the Swiss, Germans, or Japanese will release a quality grinder at this tier and at a non-astronomical price.
This is like buying a $90k car but having to calibrate the transmission before driving to ensure it runs properly.
Hello CY. Great channel. Are you going to do a burr shimming video for the DF64 Gen 2?
i will try once i have the time to do it!
@@CaffeMartellaSingapore Thanks CY. Great channel.
$400 second generation coffee grinder and we have to check and adjust burr alignment?! Wtf
Well, well, well. Check out grinders that cost a lot more and still require alignment. That is what is called SUCKS.
And also. Whether you want to check is up to you as 2nd generation df64 is pretty well aligned. The purpose of my video is for those who wish to check their alignment. This grinder allows you to check alignment easily (if you wish).
@@CaffeMartellaSingapore Yes, not knockin’ the video as I’m sure it’s helpful to many. I’m just disappointed in manufacturers who skimp on QA.
@georgewashington3012 yeah I do agree in that aspect.