On board C, the 3.3v line is short-circuited. Look at the small IC on the back of the board, in the top left corner above the Realtek audio IC. it generates the 3.3V line. in most cases the chip or the caps on the right side are short-circuited.
NinmarG is right. As you performed an APU reball i litteraly died inside. The Short on the Cap left of the M92 is never an indicator for an APU issue. Its an indicator that something on the back of the board has an issue, most likely P13USB or the 3.3v Rail.
I used to just watch nothing but repair and modding videos and just search Google for fixes to faults, tronicsfix being my favourite youtuber. Then decided to start fixing things myself, way before I even started filming, just had to practice over and over, probably had a lot of failures on the way! But over time you get better and start getting a few fixes.
I recently had a pattern of it freezing forever on the second logo. not wifi ic and capasitor issures. The fuse numbers were correct. I could solve it in a different way.
@@fixingmoddingbuilding I have question a Nintendo switch switch came in for repair I change the usb port and P13 chip as it had shots. Now switch is fix working and charging fine. But the problem is it is not docking. I have checked LCD connector it is fine as well and there is no shot around M92 chip as well. But still not image on TV. What could the problem and advice.
Seeing the little solder balls popping up is so satisfying
Yer I agree
Pretty great haul! Also appreciate the unbrick guide if ever needed. I've seen working MB go for $100-150 so, not bad for getting 2 going!
Thanks, I think they have been messed with previously so didn't expect to get much from it!
@@fixingmoddingbuilding makes sense if they're being sold in that form and in bulk. Glad you managed to save some
On board C, the 3.3v line is short-circuited. Look at the small IC on the back of the board, in the top left corner above the Realtek audio IC. it generates the 3.3V line. in most cases the chip or the caps on the right side are short-circuited.
Thank you, I will have a look at this
NinmarG is right. As you performed an APU reball i litteraly died inside. The Short on the Cap left of the M92 is never an indicator for an APU issue. Its an indicator that something on the back of the board has an issue, most likely P13USB or the 3.3v Rail.
Where'd yo learn soldering, troubleshooting and repairing like this?
I used to just watch nothing but repair and modding videos and just search Google for fixes to faults, tronicsfix being my favourite youtuber. Then decided to start fixing things myself, way before I even started filming, just had to practice over and over, probably had a lot of failures on the way! But over time you get better and start getting a few fixes.
Should've replaced the APU with a donor APU when doing that job..
Ok
How does adding a mod chip fix the boot looping switches?
Witch craft?
I recently had a pattern of it freezing forever on the second logo. not wifi ic and capasitor issures.
The fuse numbers were correct. I could solve it in a different way.
Super vidéo
Mostly where you get the motherboard, what is the price for such lot
I just find them on ebay
@@fixingmoddingbuilding Okey thanks
@@fixingmoddingbuilding I have question a Nintendo switch switch came in for repair I change the usb port and P13 chip as it had shots. Now switch is fix working and charging fine. But the problem is it is not docking. I have checked LCD connector it is fine as well and there is no shot around M92 chip as well. But still not image on TV. What could the problem and advice.
@@punjabi470 have you watched this?
th-cam.com/video/9pA9knNemS8/w-d-xo.htmlsi=ER-KgeFCjfze7u0K
Not all the time does the p13 show shorts?
try to combine board A and C
I could send you my switch lite motherboard with botched power connector.
@@ventrue6516 can you send them to Sweden?
@@ventrue6516 can you post them to Sweden