Showed my dad the name of your channel, he laughed and said he had just rewatched Goodfellas yesterday. That’s his favorite movie. Best YT channel name ever, and great content. Best wishes from West TN.
Thanks for sharing another interesting video. Hate seeing a saw die. Probably better it did so during topping and not in the middle of felling. Nice fix on the saw. Keeping them up and running is most important. Great idea using super glue to hold the wire. I thought for a moment that perhaps the broke piece of wire was still in there messing with the pull start. After you put it back together. Glad it wasn't. Have a great weekend and keep it safe out there feller.
..glue is 100 yrs old, at least ;-) phenomenal. Well, this specific saw problem is clear, there is no brend label on the cover. Such a bummer. The shop is awesome, even is not finished The flag is there, I'm speechless. Sir, take care, Miroslav/EU
A great Fix on the Saw. I betcha it will last longer than if you ordered a new Coil. Just have to Take the Bull by the Horns sometimes. I am staying in for about 3days. Thunderstorms around, and rather Wet out. Starting on Tuesday that is when I am Starting to Cut my Logs again. Right Shoulder is bothering me but living with it as very Shortly it's time to Get busy once again. Take care out there, Safe, well Hydrated and doing great Walnut Harvesting. Ron from the Woodyard in Duanesburg NY.
@@Good.FellersBut, see if a decomp valve from a 550 will fit the cylinder. That way you’ll still have “some” compression for allowing you to get everything moving and it’ll start easier. That concept works for something like my 372XT but unfortunately I don’t remember what the valve was supposed to be for.
New link of wire my friend. Husqvarna did it cheaply so new link with little bit bigger diameter wire should fix it Common malfunction nothing special atleast you can fix it
Nice fix !
And the Barn will be awesome when it`s finished.
Thanx for sharing !
Thanks Bud, I’m looking forward to a nice warm shop.
I didn’t expect the fails. This was so funny and helpful.
Glad you liked it.
Soldering or welding on camera is always a good way to get engagement 😁
Lol
Showed my dad the name of your channel, he laughed and said he had just rewatched Goodfellas yesterday. That’s his favorite movie. Best YT channel name ever, and great content. Best wishes from West TN.
Awesome, glad you like the channel!
Liquid tape is nice to have in the tool box!
I’ll check it out
I can't wait until I level up my arborist skills to be like you. you are a true inspiration to me. thank you 💙
Hey thank you for the kind words. Glad ya enjoy the channel.
Thanks for sharing another interesting video. Hate seeing a saw die. Probably better it did so during topping and not in the middle of felling. Nice fix on the saw. Keeping them up and running is most important. Great idea using super glue to hold the wire. I thought for a moment that perhaps the broke piece of wire was still in there messing with the pull start. After you put it back together. Glad it wasn't. Have a great weekend and keep it safe out there feller.
I’ve cut about 20 trees since the fix so it’s working
I’m going to order a coil to have on the shelf in case it fails.
Great to hear. Good plan. Thanks again for sharing.
Yes sir!
..glue is 100 yrs old, at least ;-) phenomenal. Well, this specific saw problem is clear, there is no brend label on the cover. Such a bummer. The shop is awesome, even is not finished The flag is there, I'm speechless. Sir, take care, Miroslav/EU
It’s a replacement cover on a 592
That will make a pretty awesome shop we you get done with it!
Yes, I hope so.
A great Fix on the Saw. I betcha it will last longer than if you ordered a new Coil. Just have to Take the Bull by the Horns sometimes. I am staying in for about 3days. Thunderstorms around, and rather Wet out. Starting on Tuesday that is when I am Starting to Cut my Logs again. Right Shoulder is bothering me but living with it as very Shortly it's time to Get busy once again. Take care out there, Safe, well Hydrated and doing great Walnut Harvesting. Ron from the Woodyard in Duanesburg NY.
Good deal, enjoy some rest my man.
Thank you for flying our Nations flag.
Yes sir.
Nice video!
Thanks Bud.
Man saws sure can be agrevating,at least you got it fixed maybe it will last a long time
I hope so, we’ll see.
You really want to be using the decomp on those 592’s. Not because we’re pussies, because it doesn’t bust shit. And that’s one NICE freaking building
Hey, thank you. I agree on the decomp. I reckon it’s why it stripped the starter on this saw.
@@Good.FellersBut, see if a decomp valve from a 550 will fit the cylinder. That way you’ll still have “some” compression for allowing you to get everything moving and it’ll start easier. That concept works for something like my 372XT but unfortunately I don’t remember what the valve was supposed to be for.
👍
The solder should not be touching the soldering iron. You heat the wire with the iron and let the wire melt the solder into it.
Good to know
The missing piece of wire is wrapped under the flywheel, and going to take out the seal under it going into your crank, pull the flywheel!
I hope not!
New link of wire my friend. Husqvarna did it cheaply so new link with little bit bigger diameter wire should fix it
Common malfunction nothing special atleast you can fix it
It’s working so far
A butt joint solder joint would have worked better.
It’s wirking fine
Sure didn’t look like it was working fine!
What r u talking about. I cut a bunch of trees with it this week.
My friend there is no such thing as stupid solutions if it works means that you doing great job 🫵🏻🫵🏻
Yes sir! I agree