This video may save me! My engine won’t start after a timing belt job and I suspect it’s how I reinstalled the intake camshaft. I’m confused how to get it back into its original position? I just learned to take it off TDC before installing camshaft? Pls help
@@ALBERTOBIGBOOST It's not a concern for say I was just trying to find out what's the biggest size on cams that you can go with out Set engine becoming an interference engine
Stupid question: When torquing the cam caps, why didn't you start at the center and work your way outward to each end? Does it matter? Most definitely not questioning your mechanical ability, just curious. On a side note, it seems like you were able to get a lot more done without the distraction of two gorgeous latinas! ; - )
Assembly lube is a high viscosity lubricant that stays in place untill washed off with the flow of oil from the engine to enable a film of lubcricant between all moving parts with the initial start up, also protects the parts from corrosion if the engine is going to be stored before use
Nice update Alberto. Thanks for sharing. Dutch regards, Nico.
Part 2 babyyyyyy!!!! You go Big Boost 🙌🏼
Where’s Janice???
@@tpf7810 en serio!!! 🥺 que pena que estaba ocupada. 🤣
YYYYYYYOOOOOOOO, I forgot about BIG BOOST! I’ve had a JZ for a year now and forgot the man that MADE ADAM LZ’s monster 2J💪🏽💪🏽💪🏽💪🏽
Good and educational video thanks.
Do a series on converting a ge into a gte please
Uff I have one to do just that for the next build 😬
Saludos Alberto canta wait to work on my 2jz
Nice video!!
Yes big boost 💪🏼
Yeah bro the beast is looking mint ✊
Thank you for the video. Do you have to set the head to and block to tdc first before tightening the cam caps. Thanks.
🔥🔥Gracias por educarnos Big Boost!
That k2 lub 🤣🤣🔥🔥
As always great content. The beginning is always my favorite 😍
Thank you for the great info. Keep it up
What do you think of these bc272 cams compared to Hks 272 cams?
👍👍🔥🔥👍👍
This video may save me! My engine won’t start after a timing belt job and I suspect it’s how I reinstalled the intake camshaft. I’m confused how to get it back into its original position? I just learned to take it off TDC before installing camshaft? Pls help
Ese drone esta muy cabron mano 🔥🔥🔥🔥🔥🔥🔥
Is a stage 3 too much for a street car? 600 to 750 ..im being told to stay at stage 2 whats ur thoughts..love ur videos man
Great upgrade 👍
After installing 272 cams dose the engine become and interference engine?
So what's that highest u can go on cam size with out it becoming an interference engine
Not entirely sure, but what is your concern from that?
@@ALBERTOBIGBOOST It's not a concern for say I was just trying to find out what's the biggest size on cams that you can go with out Set engine becoming an interference engine
How did you check the lash without the cam even being torque ??
Are you running stock intake manifold with this cams.?
What happened? Your assistant (Mia) quit already? Lol
Mia got cancelled 😞😂 kidding. I’ll be back another day! 😄
😂😂 Janice= Terminator “I”ll be back “
@@ithinkitsjanice 😂
Janice now has a new nick name “terminator” 😂
Can I install the camshaft and springs with the engine still in ? Don't need to take the head off right
Good stuff Alberto, saludos desde rd papa!
What brand is your digital torque wrench??
Snap on 1/2” digital torque wrench
Did you port the head? I’m doing a 1.5 jz with non vvti head and I’m trying to figure out if I can do the cams without porting?
Great vid but I would suggest a better mic or a mic fuzzy
I need to adjust the mic gain. It’s picking up too much noise.
Stupid question: When torquing the cam caps, why didn't you start at the center and work your way outward to each end? Does it matter? Most definitely not questioning your mechanical ability, just curious. On a side note, it seems like you were able to get a lot more done without the distraction of two gorgeous latinas! ; - )
Working middle out is usually the way to go if you have brittle camshafts the most important part is torquing it down in steps.
Alberto i need help im putting my 2j back together but i forgot to mark the cam caps i need to know the orientation of the letters on them🤦🏻🤦🏻🤦🏻
Very lucky that you didn't have to reshim lol That's rare
I knoow. That part takes forever to do.
What’s the difference between assembly lube and oil?
Assembly lube is a high viscosity lubricant that stays in place untill washed off with the flow of oil from the engine to enable a film of lubcricant between all moving parts with the initial start up, also protects the parts from corrosion if the engine is going to be stored before use
Why we dont see u at adam anny more u guys have a fight ?
No helper today 🥺
Janice is a busy girl 😬
🇳🇿👍nice👌🇺🇸
Estamos racing!!!!!
💯💯💯
Anyone know how much hp these would make on a stock block, 1000cc injectors and 6667 turbo?
I thought there is a pattern when fasten those cam caps
There is, I literally had my fingers crossed hoping it wasn't going to snap.
Demasiado duroooooo de fkPR
siiick
It was hard to hear some of what you were saying
second
bro your views have dropped? how do you feel about that?
1st
welcome!!
@@ALBERTOBIGBOOST Hello Alberto.