How to Replace Front Wheel Bearing Jeep Commander

today I will show you how to remove and install the wheel bearing in your Jeep Commander this one is a 2006. In this video I had a strange problem with the axle splines not freeing up from the inside of the wheel hub assembly so I was unable to remove the wheel bearing. The steps are the same and you shouldn't have any problem replacing your wheel hub assembly in your Jeep Commander using this video. the symptoms you will experience with a bad wheel bearing is a roaring or grinding sound coming while you're driving down the road with or without the gas or brakes applied. sometimes it sounds like an airplane. if you replace your wheel bearing and still have a similar sound it maybe your tires. You can always rub your hands across the tires and fuel for lumps or little mountains. if it's not smooth and round the tires will make a lot of noise.
the wheel bearing you'll need...
amzn.to/3bDuJMw
to get the axle to come out of The Middle...
amzn.to/3dDXquJ
Other stuff I commonly use in these videos…
Milwaukee Ratchet: amzn.to/2Fzf839
Regular Ratchet: amzn.to/2FxYsZO
Milwukee Impact: amzn.to/2X5c5W2
Socket Set: amzn.to/2IOTERA
Socket Extension: amzn.to/2XxCIaI
Floor Jack: amzn.to/2LmGM7d
Jack Stands: amzn.to/2XwcDbX
Wheel Chock: amzn.to/2J6Sjog
Permatex Rtv/Silicone: amzn.to/2Qv6aJK

[@McCrosstopher]

Dear lord, an 11 minute video that ends with him taking it to the shop anyways 😳

[@antleraddiction3006]

Don’t ever smack the nut unless want to ruin threads beat on center hole in shaft with some kind of point bar

[@damon123jones]

LIKED AND SUBSCRIBED 😁

[@mitchjacobs9798]

We are gonna be reusing this rotor so don’t want to beat on it with a hammer 🤣 5 seconds later throws it in the gravel

[@istvanjakab7369]

Can I kindly ask you if the 3.0 Commander wheel bearing would fit the hemi 5.7?
Must change it, but the price of the part is doble for the hemi model, so thought to buy the 3.0 JCommander wheel bearing
Would that work?
Thank you for your time

[@022rty]

Did he say cut the axle?....

[@akaredcrossbow]

Yes he did. I don’t know why he left that in the video, very misleading and wrong information! If it doesn’t come off, soaking it with PB blaster overnight will work. If all else fails use heat and the correct tools. It will come off without cutting anything! 🤦🏻‍♂️🤦🏻‍♂️🤦🏻‍♂️

[@careyclark79]

Just need a big hammer that little hammer no good,, a 5 would get it off quik no need to cut anything,,then if u need a bigger hammer so be it,,great job trying though

[@ronroe2013]

hit it with your purse

[@landonvaughn1527]

Inappropriate innuendos are not God-honoring

[@abdalqadr1]

Be careful of coronavirus