How to Replace a Hub & Wheel Bearing Assembly (EASY WAY)
ฝัง
- เผยแพร่เมื่อ 5 ก.ย. 2016
- PREVIOUS VIDEO ▶︎ • Do PERFORMANCE Brake P...
In this video, I replace the Hub and Wheel Bearing assembly on a 2006 Jeep Commander. Both front wheel bearings needed to be replaced so I changed them both out and fixed the ABS code, along with the noise coming from the front end. If your the wheel bearing you are trying to replace is a press-in wheel bearing, click on the following link and it will bring you to a DIY on how to fix that.
Related Videos
How to Replace a Wheel Bearing (Press-In Bearing) ▶︎ • How to Replace a Wheel...
If you have any questions regarding the video, you know what to do. Thanks for watching!! :)
______________________________________________________________
Please give it a like 👍 and follow 👣
MILMAST MERCHANDISE ▶︎ www.cteecustoms.com/category/m...
milanmastracci TH-cam Channel ▶︎ / milanmastracci
milanmastracci Facebook Page ▶︎ / milanmastracci
milmast Instagram ▶︎ / milmast
______________________________________________________________
Videos in the Outro 🎥
Do Aftermarket Brake Pads Make a Difference? (WITH PROOF) ▶︎ • Do PERFORMANCE Brake P...
Wheel Spacers vs. Wheel Adapters ▶︎ • Wheel Spacers vs. Whee...
______________________________________________________________
Products Used 🛠
OTC Front End Service Kit ▶︎ amzn.to/2cuWbBZ
Brake Caliper Hangers ▶︎ amzn.to/2dpB6X3 - ยานยนต์และพาหนะ
When someone says "this should take literally about 10 seconds". I know I better have 2 full days to complete it.
Well narrated.
Lmao! Right?!
Damn. U know this has been the best video on replacing the hub assembly I've seen all week. Me and fiancee have watched 5 different people that take down EVERYTHING, EVERY screw u could think of... just to snap off the assembly and replace it... done!... smh
THANK U FOR THIS VIDEO
Great video. I knew how to do it, but you cleared up a few things. Glad it is not just me who forgets the brake dust shield. Certain you found it when cleaning up. Torqueing the axel nut needs more explanation for the viewers.
Extremely well explained, well produced video of the highest quality. Your commentary, tips and advice were superb. The lighting made things so clear too. Thank you for your efforts and time.
Glad it was helpful Mikey! Thank you.
Great tutorial! Very clear, thorough, but you the point!
My shop was going to charge me $500, which made me want to tackle it myself.
Very nice. I've had a difficult time with the bearing on my enclave, that's really seized on there. I tried some other tips that all failed or wouldn't work because of various configurations. I hit the tool store & got a bearing puller. After beating the crap out of it, it finally came out. Thanks for the great tip, you saved me from taking it to a shop.
This was very well done. I am now ready to go attempt this repair on my vehicle. I am impressed with your teaching skills.
Thank you !
Cheers Steve!! I'm glad you found it helpful :)
me too. I agree with every word you posted. even me (a Dutchman) could follow every second
You did a good job I was able to follow you and understand everything he was doing thanks keep up the good work
Thanks. Followed all your steps and replaced both front wheel bearings on my 2008 Jeep Commander. Torqued the axle nut to 95-100 ft-lbs. Great video. Thanks agian.
1 of the best step by step vids!!!
Great job! Your teaching skills are fantastic. Your very talented.
Very thorough instructions. I like the fact that you had some helpful tools that can save hours or days of time.Thanks!
Great video, 100% fully understand and clear.
Young guy very direct and precise
Clear as day, I'm always afraid of nuts not coming loose, will be doing it with my boy
Well done... you give anyone confidence to DIY
Thank you
Awesome job kiddo! Now I'm ready to go to work on my project, thank you!
Best Repair video on TH-cam you made this so easy thanks
You are the best brother! Thanks for u explanation so clear and simple
Great video. Well filmed and narrated. I'm confident I can do this now. Thanks
Great video, I like to use slide hammer in lieu of the puller, as it puts less strain on the drive shaft, as shown on this video.
Good job. I have a Ford Focus MK2 with 2 noisy front wheel bearings. Thank you for letting me know how to replace them.
My hero! You are so calm and easy to follow....thanks so much great tutorial!
Thanks Bro you saved me money I did it myself.
Very good job explaining process
Thank you for taking your time to explain everything. Excellent job!
Great job man finally some one did a great video about it 👍👍
LMAO I LAUGHED SO HARD ON THAT NOISE YOU MADE AT 0:12
me hahahahaha
me too lmao
Wow!! Very well explained. Thanks so much
One of the best step by step videos I've seen!
I replaced the wheel hub assembly on my 02 XL7. The assembly came pre greased, do I need to add any extra grease to it?
Great video. Thank you for posting this.
Very detailed and easy to follow. Thank you.
Hey man great video. I was just wondering what brand of tools you use?
Great video Milan..very helpful
dude, great step by step tutorial.
Very glad I found this video. Thanks!
Good Job, I really enjoyed the video it was very informative and it did not bore me!
Thanks a lot , what helped me a lot was the wheel bearing puller tool. You did awesome at explaining everything in a way I understood. Thank you so muchb
Hi great video but do you have the torque setting in Ft for axle nut and brake calipers please
Rednaz Llig its called TIGHT
you did a great job! but question? why did you not use the brake dust cover ,or replace it with a new one....
Great video dude well explained 👍👌
Very smart method of working. Good job!
Dude your videos are dope!
Well done, man. Very good.
thanks this made my 07' liberty bearing hub change easy for first timer. Rented the hub puller but wouldnt fit, sledge worked better for me.
When I see an DIY instructional video this clear and detailed, my mouse pointer goes automatically to that "subscribe" button along with likes and shares lol.
Thank you Antoua! I really appreciate that 🙌
excellent demonstration, great video
Great video! Explained perfectly!
Very well explained! 👍
Very useful video and I am fully understand.... thank you
I have the same jeep patriot 2009 I want to replace the rear bumper can you make a video to how remote the bumper please 🙏
That was very helpful and detailed. Thank you a lot for this video.
A superior video. Excellent step-by-step!
Good job tomarrow I will be applying what I learn u have wonderful mechanic teaching skills also good camera video who was filming I will be looking up your videos
What is the Torque Spec for the Axle nut on the Jeep Commander?Thanks
Good job 👏 bro!!
Nice video! Very informative!!!
That's is BEST information yet .
Quick question, would you recommend putting some blue thread locker on any of those components that are torque spec'd?
GREAT VIDEO... EXCELLENT JOB!
Great video! Thank you!!
Great Video all the info i needed to do the job. Thanks
Great explaination an made it look very simple, anyone with decent hand to eye coordination can have a go at these rip things because garages charge a stupid amount to do for you 👍
Great job I appreciate the comments and the explanations.
Awesome video. Thank you.
Excellent. That's how you change the wheel bearings. !!!!!
i had my rear left done on my corsa, cos the cap somehow went missing and washing the car and the rain and wheel spinning slung out most of th e grease to the point where it was grumbling
This will work the same way with a 2003 Saturn Ion Coupe?
This is the easy way.. The other guys make it difficult. Nice and simple good job bro
Well explained, useful. Thanks
EXCELLENT PRESENTATION ...!!!
very thorough..love it
very informative thank you
Great video thanks for the info
You made this look so easy.
Thank you so much ur great.. God Bless!!!
You don't need any grease on the axle where it meet the bearing?
Great great video. Yes they are right in the comments about needing break dust cover but still an amazing video ty ty
Hey Milan, just wanted to tell you that I'm buying a VW Bora, aka a MK4 Jetta, which is pretty much Golf with a boot. Its timing belt had snapped so the valves are bent so those are going to need replacing. But thankfully for the rest of the small jobs I'll be able to watch your videos for help, because the Bora is basically a Golf underneath and on the inside. Just wanted to tell you that you'll be of great value ;).
check out bmacvags channel
Good looking my dude!!!
Good Job, well done...thanks
Great video, thanks for posting, should the ABS cable be removed from the hub assembly before removing / installing?
thanks, great educational video
Very well done. Thanx for sharing this video. How about my Lexus GS300 2006? Do you reckon I should replace the hub and wheel bearing? Thanks advanced.
Good job bro.
Did you torque the hub bearing bolts and the caliper bracket bolts to spec
K buena explicasion muchas muchas grasias
Awesome video
Use a wire brush on the exposed threads before you start the undo, the lube will help as well. But the rust can damage the threads and make the nuts loose. Good video. On Range Rover similar set up, the book says use Loctite 648 on the splines. First time I have ever heard of this. I think copper ease loosely applied does the trick. The second hand hubs came without any trace of lube or loctite.. Job being done soon as I get new bolts.
Great video....Lots of great tips too...thanks
Glad it was helpful!
Very good video and very good explanation.
Awesome video 👍 thanks
Accualy a GOOD idea!
Thank you so much , you can explain things so well , bravo ..
Thanks Lennox :)
great Video Thank you
Excellent video. Just subscribed
Very well done.
Hey, can you help me take-off whell bearing from my landrover LR2?
Excellent work very well explained . How to install the front wheel bearing on 2005 BMW 750li
it is making some noise like grinding sometimes . The car has 165000 km. Thanks for posting the video.
great video thanks bro
Wonderful explanation thank hou
Awesome video 🙏🏻🙏🏻
Thanks, great video
My pleasure!