I'm hoping this is the be all, end all inscriber automation setup! I've set this up more times than I can count, and I always forget something, so it helps to understand how and why it all works. Have a great day!
Thanks for the tutorial, I just made your automation system in "all the mods 10" and it works perfectly, I followed the video step by step and I got it.
THANK YOU!! I've built a few versions of this and they all didn't work for me, I now realized they never mentioned using raw materials for the patterns, you saved me a headache!
@@diesdasananasss make sure you're setting up processing patterns, not crafting patterns. otherwise, not sure. I usually just put the crafting pattern in for the processor and replace the items and don't have a problem.
@@jangrogamesI'm doing it in the processing pattern slot with the raw materials and it still doesnt let me w the processed materials so idk wtf is going on
I very rarely comment on videos. I had built a compact inscriber set up from TKH and it just wasn't working. Some people consider TKH to be the King of AE2. I followed his video to a T only for my system to not craft anything. What he failed to mention was that it had to be the raw materials for the circuits and not the circuits themselves. So thank you very much for pointing that out because if not, I may have had a one of a kind 2 piece split keyboard.
Hey, much of what I learned early on about AE2 was from THK -- dude knows a ton about it! I also experienced some of the same struggles, which is what prompted me to make these videos myself. Glad it's helpful and thanks for using a rare comment on me to say so :)
I just got into the modding scene and absolutely loved the AE2, but dang it, it sure is complicated to make things efficiently. Your video sure helped me to understand the mod better. I wouldn't complain if you make more automations like this
Unless it’s different in this pack you only need a pattern provider and cable connected to the ae2 controller. Leaving the pattern in each inscriber still applies though.
Yes! This is an update to the long-time single-channel sub-network automation which used to be the only way it would work because of the sides for input and output differed. You can certainly use a channel per pattern provider/inscriber combo as well like you suggest. I'll be doing an updated video with that method as well.
I've never tried it but yeah, if you've got that in your pack, use it! Isn't it from Exteneded AE though? KubeJS is a mod that allows you to use Javascript to change things in Minecraft you'd usually use Datapacks for. If you ever see KubeJS as the mod on a recipe, that may mean the recipe for that item was modified with KubeJS in your modpack
for some reason, the inscribers are online but not receiving power to actually make the circuits. I used a quartz fiber from the main network like in the vid.
I'm not sure I'm following you here. If they are online, that's the same as receiving power. Pics might help if you want to join the discord for help. discord.gg/jangro. Lots of people from this video go there for help.
Is there a way to speed this up? Its pretty slow if u wanna craft some bigger storage cells(or just building more of the same structure?). Good tutoral, it worked for me :)
Hey. I assume you have put in all the speed upgrades? You can put 5 east. After that the best solution is to use autocrafting to always keep a large number in stock with a solution like an interface and storage busses. So you never need to run the jobs yourself.
There must be a configuration issue somewhere. Like maybe it's pulling them, but the interface is putting them straight back into the network if it's not separated with fiber. what happens if you put the raw ingredients into the interface directly?
when I put the raw ingredients in the interface it puts them where they need to be in the corresponding inscriber, after the processor is made, it goes into my main storage network. I'm using fluix glass cable on top of the pattern provider and I have the quartz fibre between that cable and its connecting to another fluix glass cable that connects to the engineering inscriber. It's definitely putting the processors into my network but not taking the ingredients from it. Is it because the glass cable that's connecting the pattern provider to the network isn't actually connected to the ME drive, it's connecting to an energy acceptor. Would that make a difference?
@@snowonthemoonyt it's really hard to say without seeing it, you know? if you want to post some screenshots to my discord, we could take a look at it. discord.gg/jangro
So I just watched the video and followed along again and I have it set up exactly as you do. But, unless I'm wrong, I don't even see your pattern provider automatically grabbing the raw materials from your network? also at 10:05 you open up a terminal to start the inscribers making the processors, what is the item you're using to do that? Is it a portable terminal or something?
@@snowonthemoonyt the network sends the items to the pattern provider connected to the flat interface because the three processor patterns are in that pattern provider. Do you have the patterns in there? and did you set them up with the raw ingredients rather than the default recipe in JEI for the processors? I explain that starting at 7:56
I just now started using the multiple audio tracks for game audio and mic audio and I’m super duper excited about editing with it like that because I’ll actually be anle to talk while fighting the wither😂
None of my inscribers are doing anything. Im at the part where you put the gold bars into the interface and it transfers to the logic inscriber, but nothing is being pressed. All the devices have power so I don't know what to do.
Hello. if you put gold directly into the inscriber that has the logic press in it, it does nothing? Are you sure it's the logic press in the one you have gold going into? Power and the correct press is all I can think of.
I cannot get redstone to move into the inscriber, i've set it up like you, with redstone in the storage bus at the back. it will pull every other material, press them and move them to the last inscriber, all but redstone. Any idea why this is? thanks!
That would be an interesting way to do that. And then put a storage bus on the interface. It still needs a pattern provider somewhere, but that could be sitting inside the sub-network. With the limited channels, it may just be better to put that interface somewhere else on the network with a crafting card in it to keep the processors crafted -- which is what I plan to do here.
Hey. you need to run a fiber cable to connect power between the main network and the subnetwork so power goes through, but not data. You also need to make sure the little tiny network between the two bottom inscribers is powered in a similar way.
Yes, if you're playing an older version, you can certainly use an interface that has the patterns in it. However, the inscribers input/output from less sides and to make a compact setup, you need to rotate them. I have a video that describes how all that works here: th-cam.com/video/Wlat1xxk5uM/w-d-xo.html
I've got a weird problem. When I request more than 1 of the processors, it bugs out on the second one. EX: if i select autocraft 1 processor, it works fine. if I request 2, the first one autocrafts fine but the second wont craft. If i look in the crafting storage the recipe is there for one more and the time goes up infinitely, never auto crafting... Any idea why that could be happening?
The issue with the crafting storage ticking up just means that the craft job is never completing, which is expected. You just need to troubleshoot. The items are getting stuck somewhere. Start with doing things manually, put things manually in the interface and watch it work. Put multiple things in the interface and see what happens. Stop by the discord to post pics/vids if that will help, if you haven't already and we're happy to take a closer look. discord.gg/jangro
I’m not sure where I’m going wrong I followed the build but when I go to request a processor it says I’m missing the printed version so I made a pattern for that ex printed calculation circuit and the silicon and put it in my me interface and then it said everything was fine so I went through with the operation my prints disappeared (I took out the calculation press from the inscriber and put it directly in me system because it said it was also missing that) I’m also confused where my presses have gone because I’m missing like 3 now
It sounds like you may have the crafting patterns set up incorrectly. You shouldn't have printed circuits in your patterns, but the raw materials instead. I did cover this in the video near the end when I make the patterns. Feel free to join my discord if you want to post pictures, which can help troubleshoot discord.gg/jangro
Probably not with this setup which is a sub network and connects to the main network with one channel. It is maxed out with 8 channels within itself and It would take some redesign to add another inscriber. Maybe with a dense cable in there somewhere.
A crafting CPU is needed on your network to do any auto crafting. you can just make a simple one and start with a 1k crafting CPU. Check the in-game AE2 guide for that.
Hi, love your video, i followed each stage correctly and everything looks fine however when i naturally put redstone into my stockage system (ME drivers) it takes it from my storage automatically and start to craft every processors even though i didn't launch autocraft
Hey. thanks! That's strange. It starts crafting every processor? I'm not sure I understand. When it does that, is there a crafting job running, even though you didn't start it? Are you sure this setup is not connected directly to the network somehow? If that's the case, then things could get stored in those storage buses when you put them in the terminal. Feel free to join the discord if you want to post pictures: discord.gg/jangro
im having an issue with the printed cicuits not being extracted from the inscribers and i don't see why it's happening i've watched over the tutorial around 4 times and i don't see where i went wrong, any help would be much appreciated
Hey. Check to make sure your storage buses are configured to filter on insertion only. If none of them are being extracted, that seems most likely. There are other things as well, but it's hard to say without pictures. Feel free to drop into the discord to post pics. discord.gg/jangro
thank you for this tutorial. i was going to try and set this up in my modded world but the modpack " FTB oceanblock " doesnt have a ME pattern provider. looks like its been updated in that pack. can anything else work instead of that pattern provider ?
@@jangrogames the modpack is old , maybe 2 years. but the AE2 has been updated on that pack. when it first came out , it had the pattern provider as Direwolf did a letsplay on it. but like i said, since then it AE2 has been update on that pack and no more pattern provider. i did manage to make it work using an ME interface block and an ME interface bus ( like the storage bus). @ChrisMarissael stated below in one of his comments.
Thanks for the vid, I'm really having trouble getting the completed processor out of the system. When I insert them into the interface individually it works fine, but when trying to use the autocraft system it just doesn't work. Would appreciate any guidance you have.
You have the patterns in the pattern provider and can see them from the main network? When you craft them, what happens? do the ingredients get stuck somewhere?
When I autocraft, the problem is the redstone. It just doesn't create the completed circuit. When I do it individually via the ME interface, it works but then gets stuck in said interface after it's crafted.
It works differently if you put the items in the interface manually vs requesting the job through the terminal? Maybe I'm misunderstanding. If it crafts in the final inscriber and doesn't come out, then the issue is likely either the final export bus doesn't have the processors in the filter, or there are channels missing due to a short circuit somewhere with another network. Feel free to join the discord to post pictures! discord.gg/jangro
@@jangrogames There is only one pattern provider, there is a bunch of cabling and he has an interface on each inscriber. He could have done all this with just putting a inscriber on each side of the pattern provider. The only think he really needed to separate was the one that doesn't have a press for putting the printed circuits together. Heck, with 5 pattern providers, 4 of them stacked and one separated you can surround them with inscribers, put a press in each and do 4 of each type of circuit plus put them together at the same time... For about the same amount of space.
hmm. They aren't interfaces on the inscribers, they're storage buses, but I don't think that's relevant to your point. I need to think about this... if you're right, and it's equivalent or better, maybe I'll do another video.
@@jangrogames Ah, my mistake. Storage buses. But yeah, I'd recommend watching episode 10 of Chosen Architect's latest LP series for the mod pack he made. He builds an auto inscriber set up there and it's pretty compact, and super fast.
Where are the items ending up? They're in the inscribers but they aren't working? Are the inscribers powered? see that cable that touches the inscribers on the left side, that powers them.
@@jangrogames right. Yeah they have power and when I manually deposit items they go to the correct inscriber. When I ‘put in an order’ none of the items get taken from the ME and put through the interface. It’s almost like the network hits a roadblock between Terminal and mini-network. I have a co crafting unit with a 4K storage ontop of it connected as my craft unit. Could that be the issue?
no, it's not the crafting unit if it's letting you craft in the first place. Can you see where the items are actually going if not into the interface? it's hard to say without seeing it. feel free to drop a pic in my discord. discord.gg/jangro
Hello, I guess I'm a bit late on this topic but I tried replicating Your build and I have a weird issue which I just for the love of me can't fix. I built the setup like 90% accureate to Yours, but I run into an issue that only my silicon press is working, and is not pulling the prints out. I build a completely separate network for this wit it's own power source and first I thought I don't have enough power, but even going to Noiting furnator didn't help for this contraption. It seems, that the "back" of the inscriptors (storage panels) are all online, but inscribers are offline as well as the tiny subnetwork between the bottom inscribers. Items all flow correctly into the inscribers as well. I tried different cables, I added power acceptor and now I'm at the end of my wits, so any help would be appricicated!
Additional info: It seems that the bottom "tiny network" is not taking power correctly. So I had to go around all the cables not to overload the channels and connect it to power on it's own. After that all seems to be runnig but it's a very sloppy solution and I didn't even get to the autocrafting part. I just manually insert a crap load of items for it to run.
That's the thing, that tiny network needs power but also needs to be isolated or it will be ninth and tenth channels. I did that in the video. If you want to join the discord and post some pics, we'd be happy to help troubleshoot further. lots of people do that :)
Hello. With just AE2 proper, there's nothing that can be done. 9 channels are needed in this sub-network, one of which is isolated from the other 8 to keep it a valid sub-network. There are mods like Extended AE that have blocks that do multiple presses that you can use to get more optimized use of machines and channels, so if that's in your pack, that's something to look into.
@@jangrogames Ok thank you for the Information. in my playthrough i've used 4 of these setups connected to a dense cable. I think that'l be enough printing
Just a different way to do it. It's sort of the classic method that's been around for as long as AE2. I'm working on another video that covers this method and compares speed/channel usage, etc.
It's no bother! That may be a failed craft from earlier still sitting in the terminal. In which case you can cancel it. If that continues to happen, then the final processor is not making it back to the main network so it can mark it as done.
make sure the import bus and storage bus on that tiny one-cable network between those two machines are active. Most likely cause of that is it is connected to the other cables and there are too many channels. It needs to be isolated with a quartz fiber cable so it's powered but not connecting to the data network. Otherwise, it's hard to tell without pictures. feel free to join the discord and post pics. discord.gg/jangro
When your newer to AE2 and forget the CRAFTING STORAGE AND PROCESSING UNIT 🤦♂️🤦♂️🤦♂️🤦♂️🤦♂️🤦♂️🤦♂️🤦♂️🤦♂️ shoutout to Bear on your discord server ❤❤❤❤❤
Hey. This setup does not work on older versions of Mekanism as the older inscribers cannot input and output out of any slot. I haven't played Mekanism on that version of Minecraft, but this inscriber tutorial is more likely what you're looking for th-cam.com/video/Wlat1xxk5uM/w-d-xo.html as it shows how to rotate the inscribers to make a fairly compact setup.
@@foreinscorp The pattern provider is combined with the Interface back in that version. It should work the same with just the interface containing the patterns instead of having the pattern provider in there as well.
So I followed it to a T and I am doing the gold Logic CPU and it will not pull and put into the blank inscriber. Filters and everything. I have no idea what I am doing wrong
Hey. It's hard to say without being able to see it, but it's almost always having the storage bus configured properly. Feel free to join my discord where you can share more details and post pictures. discord.gg/jangro
I'm hoping this is the be all, end all inscriber automation setup! I've set this up more times than I can count, and I always forget something, so it helps to understand how and why it all works. Have a great day!
The first out of 5 tutorials that actually works and we get a bonus understanding of everything. What a legend.
Thanks! Glad it worked for you :)
Playing through ATM10 at the moment watching through your most recent guides on craftopia and older videos on AE2, what a godsend thank you so much!
Glad it's helpful. Thanks for watching, and the comment. I appreciate it!
lol same
List of itens needded:
- 1x Inscriber Calculation Press
- 1x Inscriber Engineering Press
- 1x Inscriber Logic Press
- 1x Inscriber Silicon Press
- 5x Inscriber
- 1x ME Interface (flat)
- 1x ME Pattern Provider
- 6x ME Storage Bus
- 2x ME Export Bus
- 1x ME Import Bus
- 10x Fluix ME Smart Cable
- 1x Fluix ME Smart Cable (dyed)
- 9x Fluix ME Glass Cable
- 2x Quartz Fiber
- 1x Redstone
Thanks for the tutorial, I just made your automation system in "all the mods 10" and it works perfectly, I followed the video step by step and I got it.
Awesome! I'm glad it worked out for you.
THANK YOU!! I've built a few versions of this and they all didn't work for me, I now realized they never mentioned using raw materials for the patterns, you saved me a headache!
Glad I could help! thanks for watching!
@@jangrogamesweirdly enough I cant put the raw materials into the patterns it doesnt let me
@@diesdasananasss make sure you're setting up processing patterns, not crafting patterns. otherwise, not sure. I usually just put the crafting pattern in for the processor and replace the items and don't have a problem.
@@jangrogamesI'm doing it in the processing pattern slot with the raw materials and it still doesnt let me w the processed materials so idk wtf is going on
I very rarely comment on videos. I had built a compact inscriber set up from TKH and it just wasn't working. Some people consider TKH to be the King of AE2. I followed his video to a T only for my system to not craft anything. What he failed to mention was that it had to be the raw materials for the circuits and not the circuits themselves. So thank you very much for pointing that out because if not, I may have had a one of a kind 2 piece split keyboard.
Hey, much of what I learned early on about AE2 was from THK -- dude knows a ton about it!
I also experienced some of the same struggles, which is what prompted me to make these videos myself. Glad it's helpful and thanks for using a rare comment on me to say so :)
i feel that "I may have had a one of a kind 2 piece split keyboard" line to the bone.
this is the masterpiece of an AE2 tutorial, thank you!!
Thanks! I’m glad it’s helpful
thanks bunches. this saved me after hours of trial and error that kept ending in a monstrous device.
I'm glad it helped! thanks for watching
Thank you so much, the only one who helped me!
Hey. Glad it’s helpful! Thanks for watching
I just got into the modding scene and absolutely loved the AE2, but dang it, it sure is complicated to make things efficiently. Your video sure helped me to understand the mod better.
I wouldn't complain if you make more automations like this
Hey thanks. glad it helped. I'm planning to, though I have made many in the past as well.
OMG a BIG THX to YOU ! Seriously your solution is efficient and SIMPLE !
Glad it helped! thanks for watching. :)
great! to make this work on older versions, just rotate the final inscriber. this setup is more compact then the one from previous tutorial
Thank you very much bro, it helped me to switch to version 1.19.2 Fabric
Thanks for sharing that. That's good to know!
Minha nossa, era exatamente o que eu tava precisando pro meu mundo mano kkkk, mto obrigado cara 🙏
de nada! obrigado por assistir
Unless it’s different in this pack you only need a pattern provider and cable connected to the ae2 controller. Leaving the pattern in each inscriber still applies though.
Yes! This is an update to the long-time single-channel sub-network automation which used to be the only way it would work because of the sides for input and output differed.
You can certainly use a channel per pattern provider/inscriber combo as well like you suggest. I'll be doing an updated video with that method as well.
On ATM9 you can use the universal Press from KubeJS. Then 3 inscriber are enough.
I've never tried it but yeah, if you've got that in your pack, use it!
Isn't it from Exteneded AE though?
KubeJS is a mod that allows you to use Javascript to change things in Minecraft you'd usually use Datapacks for.
If you ever see KubeJS as the mod on a recipe, that may mean the recipe for that item was modified with KubeJS in your modpack
for some reason, the inscribers are online but not receiving power to actually make the circuits. I used a quartz fiber from the main network like in the vid.
I'm not sure I'm following you here. If they are online, that's the same as receiving power. Pics might help if you want to join the discord for help. discord.gg/jangro. Lots of people from this video go there for help.
Is there a way to speed this up? Its pretty slow if u wanna craft some bigger storage cells(or just building more of the same structure?). Good tutoral, it worked for me :)
Hey. I assume you have put in all the speed upgrades? You can put 5 east. After that the best solution is to use autocrafting to always keep a large number in stock with a solution like an interface and storage busses. So you never need to run the jobs yourself.
Hi, I followed it exactly but the pattern provider isn't pulling the raw ingredients from my storage network. Can u help with that please?
There must be a configuration issue somewhere. Like maybe it's pulling them, but the interface is putting them straight back into the network if it's not separated with fiber. what happens if you put the raw ingredients into the interface directly?
when I put the raw ingredients in the interface it puts them where they need to be in the corresponding inscriber, after the processor is made, it goes into my main storage network.
I'm using fluix glass cable on top of the pattern provider and I have the quartz fibre between that cable and its connecting to another fluix glass cable that connects to the engineering inscriber.
It's definitely putting the processors into my network but not taking the ingredients from it. Is it because the glass cable that's connecting the pattern provider to the network isn't actually connected to the ME drive, it's connecting to an energy acceptor. Would that make a difference?
@@snowonthemoonyt it's really hard to say without seeing it, you know? if you want to post some screenshots to my discord, we could take a look at it. discord.gg/jangro
So I just watched the video and followed along again and I have it set up exactly as you do. But, unless I'm wrong, I don't even see your pattern provider automatically grabbing the raw materials from your network? also at 10:05 you open up a terminal to start the inscribers making the processors, what is the item you're using to do that? Is it a portable terminal or something?
@@snowonthemoonyt the network sends the items to the pattern provider connected to the flat interface because the three processor patterns are in that pattern provider. Do you have the patterns in there? and did you set them up with the raw ingredients rather than the default recipe in JEI for the processors? I explain that starting at 7:56
Yo you just saved my butt! Who knows how long I would’ve streamed without desktop audio
I had to end stream in order to fix it but I think I got it figured out now.
nice. I wasn't sure if I should mention it. didn't want to throw you off :)
@@jangrogames NOO PLEASE
I am in the learning phase and still trying to get this stuff figured out
I just now started using the multiple audio tracks for game audio and mic audio and I’m super duper excited about editing with it like that because I’ll actually be anle to talk while fighting the wither😂
Really appreciate this video. Is there a way to use the universal press and condense this into two inscribers?
Glad it was helpful. Sorry I haven’t tried the universal press!
is there a way to make the items import faster to the insribers?
None of my inscribers are doing anything. Im at the part where you put the gold bars into the interface and it transfers to the logic inscriber, but nothing is being pressed. All the devices have power so I don't know what to do.
Hello. if you put gold directly into the inscriber that has the logic press in it, it does nothing? Are you sure it's the logic press in the one you have gold going into? Power and the correct press is all I can think of.
I cannot get redstone to move into the inscriber, i've set it up like you, with redstone in the storage bus at the back. it will pull every other material, press them and move them to the last inscriber, all but redstone. Any idea why this is?
thanks!
This is where I'd say, jump into the discord to make it easier, but you did already :)
Would swapping the pattern provider with an interface work to just hold a stack of each ingredient and then a stack of each processor all the time?
That would be an interesting way to do that. And then put a storage bus on the interface. It still needs a pattern provider somewhere, but that could be sitting inside the sub-network. With the limited channels, it may just be better to put that interface somewhere else on the network with a crafting card in it to keep the processors crafted -- which is what I plan to do here.
How are you powering the devices with ae cable? I hook mine up but still am missing power to run them
Hey. you need to run a fiber cable to connect power between the main network and the subnetwork so power goes through, but not data. You also need to make sure the little tiny network between the two bottom inscribers is powered in a similar way.
Could this be done without pattern providee and interface instead? playing an older verison
Yes, if you're playing an older version, you can certainly use an interface that has the patterns in it. However, the inscribers input/output from less sides and to make a compact setup, you need to rotate them. I have a video that describes how all that works here: th-cam.com/video/Wlat1xxk5uM/w-d-xo.html
I've got a weird problem. When I request more than 1 of the processors, it bugs out on the second one. EX: if i select autocraft 1 processor, it works fine. if I request 2, the first one autocrafts fine but the second wont craft. If i look in the crafting storage the recipe is there for one more and the time goes up infinitely, never auto crafting... Any idea why that could be happening?
The issue with the crafting storage ticking up just means that the craft job is never completing, which is expected. You just need to troubleshoot. The items are getting stuck somewhere. Start with doing things manually, put things manually in the interface and watch it work. Put multiple things in the interface and see what happens. Stop by the discord to post pics/vids if that will help, if you haven't already and we're happy to take a closer look. discord.gg/jangro
I’m not sure where I’m going wrong I followed the build but when I go to request a processor it says I’m missing the printed version so I made a pattern for that ex printed calculation circuit and the silicon and put it in my me interface and then it said everything was fine so I went through with the operation my prints disappeared (I took out the calculation press from the inscriber and put it directly in me system because it said it was also missing that) I’m also confused where my presses have gone because I’m missing like 3 now
It sounds like you may have the crafting patterns set up incorrectly. You shouldn't have printed circuits in your patterns, but the raw materials instead. I did cover this in the video near the end when I make the patterns. Feel free to join my discord if you want to post pictures, which can help troubleshoot discord.gg/jangro
😮🎉
what mod are you using to make things show on the top of the screen when keeping the crosshairs over them ?
Hi. There are lots of mods that do this, but I think this one is Jade.
What if I want to use the ATM 10 "inscriber universal press"? How do I do it?
I haven't tried that. It does work if you want to insert it, or so I've heard, but I don't have details. Maybe someone else here can help!
@jangrogames ok thanks g
would it be possible to add anothr inscriber making accumalation circuits?
Probably not with this setup which is a sub network and connects to the main network with one channel. It is maxed out with 8 channels within itself and It would take some redesign to add another inscriber. Maybe with a dense cable in there somewhere.
@@jangrogamesokay, thanks. I'll try messing around with it
i feel dumb but what is a crafting cpu ? I have all this setup but when i go to craft something it says " no crafting cpus are available "
A crafting CPU is needed on your network to do any auto crafting. you can just make a simple one and start with a 1k crafting CPU. Check the in-game AE2 guide for that.
i have this exact setup and its not working for me, it says that there are no cpus avalible, any help?
Hey. You need to have auto crafting set up in the first place which involves setting up crafting CPU
Hi, love your video, i followed each stage correctly and everything looks fine however when i naturally put redstone into my stockage system (ME drivers) it takes it from my storage automatically and start to craft every processors even though i didn't launch autocraft
Hey. thanks! That's strange. It starts crafting every processor? I'm not sure I understand. When it does that, is there a crafting job running, even though you didn't start it? Are you sure this setup is not connected directly to the network somehow? If that's the case, then things could get stored in those storage buses when you put them in the terminal.
Feel free to join the discord if you want to post pictures: discord.gg/jangro
im having an issue with the printed cicuits not being extracted from the inscribers and i don't see why it's happening i've watched over the tutorial around 4 times and i don't see where i went wrong, any help would be much appreciated
Hey. Check to make sure your storage buses are configured to filter on insertion only. If none of them are being extracted, that seems most likely. There are other things as well, but it's hard to say without pictures. Feel free to drop into the discord to post pics. discord.gg/jangro
@@jangrogames hi, i posted two pictures on the discord if they are any use
what about concurent processors used in ae2 advanced
I'm not sure, that mod wasn't in this pack. Give it a shot and let us know!
thank you for this tutorial. i was going to try and set this up in my modded world but the modpack " FTB oceanblock " doesnt have a ME pattern provider. looks like its been updated in that pack. can anything else work instead of that pattern provider ?
How old is that pack? At one point the interface did the job of a pattern provider but that was many versions ago
Also if the pack is that old this tutorial won’t work very well. I have a video in my Valhelsia 5 series that goes through the setup
@@jangrogames the modpack is old , maybe 2 years. but the AE2 has been updated on that pack. when it first came out , it had the pattern provider as Direwolf did a letsplay on it. but like i said, since then it AE2 has been update on that pack and no more pattern provider. i did manage to make it work using an ME interface block and an ME interface bus ( like the storage bus). @ChrisMarissael stated below in one of his comments.
Thanks for the vid, I'm really having trouble getting the completed processor out of the system. When I insert them into the interface individually it works fine, but when trying to use the autocraft system it just doesn't work. Would appreciate any guidance you have.
You have the patterns in the pattern provider and can see them from the main network? When you craft them, what happens? do the ingredients get stuck somewhere?
When I autocraft, the problem is the redstone. It just doesn't create the completed circuit. When I do it individually via the ME interface, it works but then gets stuck in said interface after it's crafted.
It works differently if you put the items in the interface manually vs requesting the job through the terminal? Maybe I'm misunderstanding. If it crafts in the final inscriber and doesn't come out, then the issue is likely either the final export bus doesn't have the processors in the filter, or there are channels missing due to a short circuit somewhere with another network. Feel free to join the discord to post pictures! discord.gg/jangro
@@jangrogames Yeah that’s exactly it. When I have some time I’ll post screenshots in your discord.
This is actually a lot more complicated than it needs to be. There is a far simpler method to this with out all the extra interfaces.
There's just one interface though
@@jangrogames There is only one pattern provider, there is a bunch of cabling and he has an interface on each inscriber. He could have done all this with just putting a inscriber on each side of the pattern provider. The only think he really needed to separate was the one that doesn't have a press for putting the printed circuits together.
Heck, with 5 pattern providers, 4 of them stacked and one separated you can surround them with inscribers, put a press in each and do 4 of each type of circuit plus put them together at the same time... For about the same amount of space.
hmm. They aren't interfaces on the inscribers, they're storage buses, but I don't think that's relevant to your point. I need to think about this... if you're right, and it's equivalent or better, maybe I'll do another video.
@@jangrogames Ah, my mistake. Storage buses. But yeah, I'd recommend watching episode 10 of Chosen Architect's latest LP series for the mod pack he made. He builds an auto inscriber set up there and it's pretty compact, and super fast.
I cannot get the set up to work. It alows me to send the craft through the network but none of the inscribers begin to craft.
Where are the items ending up? They're in the inscribers but they aren't working? Are the inscribers powered? see that cable that touches the inscribers on the left side, that powers them.
@@jangrogames right. Yeah they have power and when I manually deposit items they go to the correct inscriber. When I ‘put in an order’ none of the items get taken from the ME and put through the interface. It’s almost like the network hits a roadblock between Terminal and mini-network. I have a co crafting unit with a 4K storage ontop of it connected as my craft unit. Could that be the issue?
no, it's not the crafting unit if it's letting you craft in the first place. Can you see where the items are actually going if not into the interface? it's hard to say without seeing it. feel free to drop a pic in my discord. discord.gg/jangro
Will this work with extended inscribers too?
Hey. I haven’t done it but I heard they do work.
@@jangrogames sweet ill test it out
Why not just use the circuit etchers?
Isn't that from the Lazy AE2 mod, which is on Mincraft version 1.12?
that's why not :)
Hello, I guess I'm a bit late on this topic but I tried replicating Your build and I have a weird issue which I just for the love of me can't fix. I built the setup like 90% accureate to Yours, but I run into an issue that only my silicon press is working, and is not pulling the prints out. I build a completely separate network for this wit it's own power source and first I thought I don't have enough power, but even going to Noiting furnator didn't help for this contraption. It seems, that the "back" of the inscriptors (storage panels) are all online, but inscribers are offline as well as the tiny subnetwork between the bottom inscribers. Items all flow correctly into the inscribers as well. I tried different cables, I added power acceptor and now I'm at the end of my wits, so any help would be appricicated!
Additional info: It seems that the bottom "tiny network" is not taking power correctly. So I had to go around all the cables not to overload the channels and connect it to power on it's own. After that all seems to be runnig but it's a very sloppy solution and I didn't even get to the autocrafting part. I just manually insert a crap load of items for it to run.
That's the thing, that tiny network needs power but also needs to be isolated or it will be ninth and tenth channels. I did that in the video. If you want to join the discord and post some pics, we'd be happy to help troubleshoot further. lots of people do that :)
@@jangrogames Amazin, will check it out, Thanks!
is there a way to optimize this so you use less channels ?
Hello. With just AE2 proper, there's nothing that can be done. 9 channels are needed in this sub-network, one of which is isolated from the other 8 to keep it a valid sub-network. There are mods like Extended AE that have blocks that do multiple presses that you can use to get more optimized use of machines and channels, so if that's in your pack, that's something to look into.
@@jangrogames Ok thank you for the Information. in my playthrough i've used 4 of these setups connected to a dense cable. I think that'l be enough printing
idk why make it so complicated, just put 4 around a pattern provider, enable push and your done.
Just a different way to do it. It's sort of the classic method that's been around for as long as AE2. I'm working on another video that covers this method and compares speed/channel usage, etc.
im not sure what ive done wrong i followed the tutorial to a Tee but my redstone wont input into the inscriber everything else works though :C
okay im dumb dw hahah i got it working but now it says that its crafting in the cpu terminal but its crafted it any ideas sorry to bother you
It's no bother!
That may be a failed craft from earlier still sitting in the terminal. In which case you can cancel it. If that continues to happen, then the final processor is not making it back to the main network so it can mark it as done.
I cant get my cable for the silicon to work
What's happening? you mean the printed silicon doesn't move from its inscriber into the final inscriber?
Yea
make sure the import bus and storage bus on that tiny one-cable network between those two machines are active. Most likely cause of that is it is connected to the other cables and there are too many channels. It needs to be isolated with a quartz fiber cable so it's powered but not connecting to the data network. Otherwise, it's hard to tell without pictures. feel free to join the discord and post pics. discord.gg/jangro
@@jangrogames were do I need to post the pictures in the discord?
When your newer to AE2 and forget the CRAFTING STORAGE AND PROCESSING UNIT 🤦♂️🤦♂️🤦♂️🤦♂️🤦♂️🤦♂️🤦♂️🤦♂️🤦♂️ shoutout to Bear on your discord server ❤❤❤❤❤
Glad you got it sorted out. :)
Does this work on minecraft 1.7.10? I recently played blightfall and wanna make this T-T
Hey. This setup does not work on older versions of Mekanism as the older inscribers cannot input and output out of any slot. I haven't played Mekanism on that version of Minecraft, but this inscriber tutorial is more likely what you're looking for th-cam.com/video/Wlat1xxk5uM/w-d-xo.html as it shows how to rotate the inscribers to make a fairly compact setup.
@@jangrogames alright thanks for the tutorial :D
@@jangrogames I realized that there's no pattern provider in whatever version in blightfall.. would the thing still work tho?
@@foreinscorp The pattern provider is combined with the Interface back in that version. It should work the same with just the interface containing the patterns instead of having the pattern provider in there as well.
@@jangrogames I see.. thank you II'll try making it XD
So I followed it to a T and I am doing the gold Logic CPU and it will not pull and put into the blank inscriber. Filters and everything. I have no idea what I am doing wrong
Hey. It's hard to say without being able to see it, but it's almost always having the storage bus configured properly. Feel free to join my discord where you can share more details and post pictures. discord.gg/jangro