Been trying to figure this out for a few hours now with setups way more complicated than this and had no luck. I stumble upon this tutorial and everything is working in 5 minutes. Thank you so much.
Единственный человек, который объяснил всё на иностранном языке, но более понятнее, чем те, кого посмотрел на моем родном языке, огромное спасибо за видео! If you reading it, have a nice day, mate!
If you're rocking ATM10, you can add an induction card to the pattern provider and it will transfer energy into the machine, making it get an input/output, chemical input/output and energy all come from 1 port (the pattern provider side). You will need to get power for your ME system to get this working.
I ended up using one single infuser as a cheap and instantaneous chemical oxidizer (wouldn't be surprised if this gets tweaked, because this actually pretty busted) then I just used separate infusers for every single alloy and circuit (cheaper to make circuits in infusers). This video helped a lot, thanks!
Thank you! I was even able to create the Atomic Alloy and Steel Dust following how the patterns were created and putting in the correct pattern provider. :)
Ur not gonna believe me, but I was searching for your channel once again to make the auto infuser in my server again and you just made this video, thx bro
I'm playing on ATM9 standard edition, and for some reason i can't get the mekanism Liquids to be a part of the crafting recipes and i can't click to drag it into the recipe either. any help would be wonderful!
why are more people not using this method, it's so much simpler than setting up like 4 infusers and enrichment chambers then endlessly dumping materials into it til it fills...this way i can request 2 and get 2, no extra waste (or anything that is extra can be used later)
@@mommaeltala same as the other infuse types. You need a storage device, (in this case ae2 chemicals), a chemical pipe set to pull, and to have the infuse type tab outputting to the pipe.
@@Shmity113 With newer versions it's been merged into the chemicals tab. Exactly the same principles apply (Need to set it to output & have a gas/chemical pipe that is extracting)
@ I figured that might be it, but when I tried it, the system said that “chemicals could not be ejected, but manual extraction may be possible”. I might just be a problem with the mod pack?
@@Shmity113 it's exactly what it says. The machine won't push them out, but if you configure the face first to output, then add a pipe that can extract (pipez, mekanism) you can extract it.
If anyone finds this and their infuser making the chemicals isn't working, I was trying to use an ME Extended Pattern Provider (from ExtendedAE) on it and it wasn't working. Changing to an ME Pattern Provider (and using the same patterns) fixed it.
Doesn't this setup get stuck if you try to craft a recipe with several types of alloys? I say this because in one of the attempts I made to automate this, it got stuck in that specific case. In any case thanks for the idea, i will try it.
For some reason it won’t make atomic alloys anymore. I crafted a couple to test and it worked but after that I won’t craft anymore. But it still crafts the other alloys. Just not the atomic.
Really awsome content, just what i was looking for in fact. I have a slight issue tho, I can't input the chemicals into the pattern, just the items. You dont happen to know why that is? Just playing on an unmodified ATM 9 save.
replying because i have the same issue and want to be notified of a solution (edit) I figured out what i was doing wrong. i had the side that was attached to the crafting interface set to input/output instead of extra in the item config, so check that first and let me know if that works
But why it has to be like this, i mean for the last 4 hours i tryed to figure this out but i gave up and i looked for a tutorial leading me to this video. Way to complicated, without this tutorial i would never automatize the mekanism in my pack.
After watching hours of complicated AE2/Mek videos, this is easily the best alloy generation setup.
Been trying to figure this out for a few hours now with setups way more complicated than this and had no luck. I stumble upon this tutorial and everything is working in 5 minutes. Thank you so much.
Единственный человек, который объяснил всё на иностранном языке, но более понятнее, чем те, кого посмотрел на моем родном языке, огромное спасибо за видео! If you reading it, have a nice day, mate!
Man, I used to make a lot of machines to make these recipes, thanks for opening my mind to see how simple it is
Struggle bussed for hours. 5 minute video, thank you! Everything here worked perfect on ATM9
This could not have been better timing. Thanks man! I was stuck in the old days of still using LaserIO to filter and extract everything. Lol.
If you're rocking ATM10, you can add an induction card to the pattern provider and it will transfer energy into the machine, making it get an input/output, chemical input/output and energy all come from 1 port (the pattern provider side). You will need to get power for your ME system to get this working.
I ended up using one single infuser as a cheap and instantaneous chemical oxidizer (wouldn't be surprised if this gets tweaked, because this actually pretty busted) then I just used separate infusers for every single alloy and circuit (cheaper to make circuits in infusers). This video helped a lot, thanks!
Thank you!
I was even able to create the Atomic Alloy and Steel Dust following how the patterns were created and putting in the correct pattern provider. :)
not gonna lie, at first i was a bit frustrated with this because it was less handholding than i'd like but this is a great system. Thanks a ton!
This is a great video! if youre using pipez, just remember to use a wrench and change the settings to pull on the back, had some trouble with that.
I spent hours to automate this and my setup was extremely inefficient. I can't believe how simple it was... Thanks! ❤
thank you so much. I now understand how inputs and outputs work in mekanism, Great setup, very simple
Ur not gonna believe me, but I was searching for your channel once again to make the auto infuser in my server again and you just made this video, thx bro
Happy to help!
Thanks for this guide! And double thanks for not making it 50 minutes long!
What an amayzing video! Got to the point, did a great explanaition, and in a short period of time. Good job!
Thank you for more detailed guide on this technology
I'm playing on ATM9 standard edition, and for some reason i can't get the mekanism Liquids to be a part of the crafting recipes and i can't click to drag it into the recipe either. any help would be wonderful!
@@Zyx3ds18 are you able to see the recipes in jei, for both making the infuse type and for using it?
i dont have the infuse types screen only chemicals and the redstone doesnt import into my system..
why are more people not using this method, it's so much simpler than setting up like 4 infusers and enrichment chambers then endlessly dumping materials into it til it fills...this way i can request 2 and get 2, no extra waste (or anything that is extra can be used later)
how does one get the carbon out of metalligeric infusor?
@@mommaeltala same as the other infuse types. You need a storage device, (in this case ae2 chemicals), a chemical pipe set to pull, and to have the infuse type tab outputting to the pipe.
@@KalmightI’m playing FTB evolutions and my infusers don’t have that tab option. Is there something I have to do to make said tab appear?
@@Shmity113 With newer versions it's been merged into the chemicals tab. Exactly the same principles apply (Need to set it to output & have a gas/chemical pipe that is extracting)
@ I figured that might be it, but when I tried it, the system said that “chemicals could not be ejected, but manual extraction may be possible”. I might just be a problem with the mod pack?
@@Shmity113 it's exactly what it says. The machine won't push them out, but if you configure the face first to output, then add a pipe that can extract (pipez, mekanism) you can extract it.
If anyone finds this and their infuser making the chemicals isn't working, I was trying to use an ME Extended Pattern Provider (from ExtendedAE) on it and it wasn't working. Changing to an ME Pattern Provider (and using the same patterns) fixed it.
Doesn't this setup get stuck if you try to craft a recipe with several types of alloys? I say this because in one of the attempts I made to automate this, it got stuck in that specific case. In any case thanks for the idea, i will try it.
@@Mofa28obo it won't get stuck using this setup as only the exact amounts enter
This is so smart I would have never thought of it. Thanks! :p
For some reason it won’t make atomic alloys anymore. I crafted a couple to test and it worked but after that I won’t craft anymore. But it still crafts the other alloys. Just not the atomic.
i cant figure out how to make this work with osmium compressor
@@xXxBo5sANaCxXx I believe it won't work on this version of mekanism. If you're playing on 1.20.1 and up it should.
@@Kalmight its on ATM10
dop they have to be apart or can you put them together
@@rizzvit you can put them together, I just wanted to show that there was no transfer directly between them. Only through the AE2 system
For some reason my setup doesnt want to make the chemicals
How are you powering the machines?
@@MrERious1994 flux networks, but any power cable will do
U are a life-savior man, best alloy generation!
Atm10?
works fine, the infuser just looks different, set chemicals to output where you put the tube and youll be good to go
Really awsome content, just what i was looking for in fact. I have a slight issue tho, I can't input the chemicals into the pattern, just the items. You dont happen to know why that is? Just playing on an unmodified ATM 9 save.
@@dampestgem3112 That's strange, could be a few issues. Are you able to see the patterns when you go through the recipe browser?
Nevermind, found out that a gauge dropper works just fine as a transfer medium instead. Leaving this here for future people.
@@Kalmight Yeah i can, and it also indicates that i can add it to the pattern, but the infuse types just never transfer over.
@@dampestgem3112 I Love you 😅🤙
so easy it Could be? Wow didn't saw that comming with such ease
Eh, I was so overcomplicating things doing it the old way. Chemical approach is the way I guess.
Thanks for this video helped me alot!
for some reason i cant seam to craft the liquids. Anyone have a solution?
replying because i have the same issue and want to be notified of a solution
(edit)
I figured out what i was doing wrong. i had the side that was attached to the crafting interface set to input/output instead of extra in the item config, so check that first and let me know if that works
@@Visidron22i Found a solution after some time i neded an item pipe on the side in adition til the pressirized tube at the back
Thank you so much for making this video
Thank you
Thank you so much
Thank you!
thanks really helpfull
But why it has to be like this, i mean for the last 4 hours i tryed to figure this out but i gave up and i looked for a tutorial leading me to this video.
Way to complicated, without this tutorial i would never automatize the mekanism in my pack.
can u speak louder next time
thank you!! :D