I do like this channel and the way of presentation, and more of this. He is definitely giving a right content to his viewers. Good bro. I really appreciate your work.
Man I love you videos.... Simple and informative content. I don't wanna compare your channel to any other channel but you do remind me of MC garage. I hope your channel hits great heights and hope to see a face reveal in the future too. 😊
Before the new engine oil, you can add some cheap oil of same grade and run engine for few seconds so that it can stick the setled flush oil from bottom and then add the bew oil..
Your videos are awesome. Point to point information. No bakwas like other moto bloggers. I wish you a good luck. One more thing i want to add is that i am watching you tube more than 20 months on daily basis and subscribed lots of channels in different category but this my one of few comment ever on any video.
I'd say treat the flushing with care as it might clog your oil galleries with deposits. In that case more harm done than good. Basis of a good engine life consists of frequent oil change interval, authentic oil and oil filter plus fuel treatment as it also acts as a solvent inside the combustion chamber.
I change my engine oil for my RC 390 (2016) at every 2500kms, motul 10W 50 with new oil filter. Done 30,000+Kms My engine still looks brand new from inside when sides were opened for clutch replacement.
@@cranky1812 okay, I have honda shine which has gone 9000kms, and I have changed engine oil 4 times ,and now I will be changing again after 6 months since last oil change, do you think i should flush my engine?
@@abhashdc8071 Engine flush is necessary because engine oils are based on petroleum hydrocarbons which decompose and form new compound under heat and pressure which should be removed to increase engine efficiency
Does Unocorn 160cc have an oil filter?Last 4 years been changing the oil no sign of oil filter.2)In yourpervious video wherin you add the liqui moly Mos2 shooter engine oil additive,I guess you have not mentioned the number of times one needs to do it,for eg- Does it need to happen with every oil change?pleaae reply.
great video sir, i have a doubt im riding a pulsar 180 almost 15 years old maintain regularly and properly but uses mineral based oil and clocked 1 lakhplus kilometers on it. should i do a engine flush or not ?
The most satisfying for a biker is the old oil coming of the bike and I always love to change to oil all by myself thank you bro I always love your vedios please give some tips how to maintain the milage of the bike and also if you have any scooter with you please make a separate vedios for scooters too it will be helpful
OH MY GOD ! I was desperately looking for a review of this product. Here you came for a rescue. After riding 30K KMs since inception using Yamahalube Sporty premium, before migrating on to a premium engine oil ( LM street racer) in my Yamaha R3, I used it. I must say! Your advice and procedures to use this product worked like a charm. While draining oil after using this for 10 to 12 mins, I found the oil was darker in shade and dirtier than ever before. Than I poured in Liqui Moli Street Racer. Now I am thanking you . ❤
Hi Karteek, Not required, a brand new engine will have no sludge deposits with negligible presence of carbon. A regular oil change (with oil filter, if present) will be fine.
The oil base is different on both these oils so a detailed comparison will be interesting, what say? After using the 300V 10W-40 on the RTR 200 (I hope you have seen the Rajasthan ride series) we were tempted to try the 300V 15W-50 on the Dominar but we were concerned about changing the winter grade. My experience with Liqui Moly on my car was great so thought of giving it a try and the most important it was available in 10W50 fully synthetic grade so went for it (expensive than the 300V). For now the experience is good if not better then at least it's on par with the 7100 10W50, let's see how it performs on long term 😊
The Sportztourer Will there be desired result, if Liqui Moly engine flush and fuel shooters used with 300v, a bit sceptical as im about to replace my bikes oil.
Great video, your DIYs are on point and very helpful. I own a fzs v2 and ride it very less approx 1200-1500kms a year. The oil change interval recommended by manufacturer is around 2500-3000km so I change my engine oil at an interval of 1.5-2 years but I always keep an eye that it does not get low. Does engine oil degrade over time or is it ok to just change at manufacturer recommended kms irrespective of time.
Flushing is no doubt good once in 25-30k km but how do we get rid of the residual flush sitting inside the engine as we cannot drain the engine oil completely? Though my engine has 2 litres oil capacity, replacement is 1.75 litres... That 250 ml is still old and mixed with this flush.... Can this cause any issues with the engine component?
@@thesportztourer yes brother I liked all your vedio brother. Very informative video. I can't find this type of informative vedio. I really enjoyed your all vedio. It is really very helpfulI to me. Iam planning to purchase TVS Apache 200 4v non-abs model. Is there any issue of non-abs model. I am very tight budget. I can't afford abs model.
Not really, even if you use good quality oil the engine oil does break down and does form sludge, the issues do happen even with best oil. Anti slude does indeed work, but yes this is no substitute for changing oil on time and using good filters. This is just an add on maintenance thing for best results, it's not a thing you have to do during every oil change but you can do it once in 10 or 20 k kms
@@ashishpatel350 snake oil is a different thing or concept. If something says it will magically improve your power or milegae to unbelievable extent then the item is often termed snake oil The concept of snake oil is when people think basic additive or item will transform their vehicle beyond anything
@@ashishpatel350 like a good synthetic engine oil will improve your vehicle performance by 5-10% over original/mineral oil is still a thing that happens but if someone says that put this oil and all your issues will be solved, it will repair your broken engine and like imporve performance and make it double etc thing then that product is termed snake oil
@@hiteshadhikari all good oils have anti sludge additives. They are called detergents they dissolve any sludge and suspend them in the oil. Like I said these are snake oil. If you have sludge in your engine it's due to not changing the oil on time. Which ussually means you have bigger problems with engine.
You are right. Present engine oils come with cleaning agents present inside them. So it cleans the engine continuously. If we use flush it can damage the bearings.
No its not for new vehicles. For old vehicles might hurt because all the sludge and gunk which is preventing the oil to leak might break down with the engine flush. And your old vehicle will come out a white smoke from oil leak. And also depends on the engine flush you use. If you use cheap product of course it will hurt your engine.
My Dominar got the problem of coolant leaking into the engine. The problem is fixed. I have done 30k kms as of now. will using a engine oil flush good for engine ?
Thanku for awesome video 🥰 sir should i go for engine flush if i gonna switching from yamalube 10w 40 sl M to motul 7100 Odo done 5000 and oil change interval 4000 km plz suggest 🙏🙏
@@thesportztourer sir thanku for your reply 🥰May I favour a request more that i have Mt-15 which coolant is low should i topup the motul coolant to yamalube coolant or i have to do a coolant flush 🙏🙏
Excellent video. I have a question for you though, since we all are elbow grease lovers, we tend to do a lot of maintenance ourselves. However, where should we dump the old engine oil after removing it? Here in Mumbai it’s not allowed to drop it in the sewage line, so where to dump it?
In America, we bring them to auto part where they recycle the used oil. Don't dump in trash care or sewage line because it will contaminate your water supply
Bro i own a FZ V2 which has run about 5000km but the engine feels very harsh and noisy after just 10-15kms of riding so will flushing the engine solve this problem pls reply asap
If you are using the mineral base Yamalube optima or optima prime then I would suggest you to go for a better synthetic base engine oil like the 7100 or ultra. Just make sure you go with the right grade: amzn.to/2LTUy2u
Broda, I have bought new bajaj P220F ABS And I have done First Service At 490km But I'm willing to Change Engine Oil at 2500 or Within 120 days but i will get motul 5100 Semi Synthetic Engine oil for My New bike and probably would change it through outside, not by bajaj service center because i know a experienced neighbor mechanic who is my good friend so now My Question Is Do i need to do engine flush before installing new Motul Engine oil ? cause my bike already got bajaj oil in it !
Hii bro 🙂🙏🏻 Your videos are awesome nd perfectly shooted,clear and lovely voice and simply with properly explained videos i watched your videos jo muje dekhne ki zarurat bhi nahi thi but maine full videos dekhi kya jaadu hai apki voice me aur samjhane k way me Wow bro carry on Wese sorry mujhe proper english aati nahi hai maine comment me Hindi mix kar di 😔😂🤗♥️
Does the engine flush traces in the new engine oil left by the old one harm the engine??? Is it good or bad for the engine's life due to these little engine flush traces?
As already said by Mr Luv kumar, i also want to say the same that your content is very informative and simple. Keep it up and one day you will hold a repo as good as MC garage.
I have Thunderbird 350 bs3 model 2017. I am changing oil for every 3000 km. Using liquid gun mineral oil (those days they have only mineral oil), now switched to semi synthetic oil liquid gun as company prescribed. Please let me know which is the best oil synthetic or semi synthetic or mineral oil for Thunderbird 350 bs3. Also which brand is good. What about draining intervals? May i go with flush when I change the oil everytime?
Hi, the Dominar 400 uses two methods for engine oil change. One of them is what you explained in the video. Have you ever tried to completely drain the remaining oil? If so, please share your experience.
I got an shand 11year old bike (125000Km) where it used proper motul fully synthetic for past some years. I am thinking of flushing it and fill it with motul. But as you said not thanking to rebuilt engine since engine is fine. What you think, i should flush it or not with liqui moly?
After engine flush it is mendatory to stroke it again with mineral or semi synthetic oil bcoz engine flush liquid removes the zink coating which is applied earlier by strokint the engine which prevents the engine metals to teardown and make the engine smooth
I have hero passion pro year 2015 I do regularly change engine oil and do service still for my peace of mind I want to do engine flushing , what you suggest what to do and what not to do for my bike?
I had flushed my engine and put liqui moly 10w40 street race after 3000km my stupid mechanic topped up my engine oil with semi synthetic oil ..should I again use engine flush when I add new engine oil ?
My mechanic changed engine oil and added the Engine Flush to the new oil... Please suggest if I should ride the bike or immediately change the engine oil again I have riden 10kms post this oil change, engine felt relatively smooth but i know engine Flsuh will hinder proper working of lubricarion
I have a hornet160r & honda recommends 10w30, plz suggest which brands would suit apart from honda engine oil? I've used Motul 1.2 4t 3000 4t+ 10 w 30 premium mineral ma2 4 stroke but issues with gear and pickup...plz suggest
Hey, My Bike (2019 gixxer sf bs4) has done close to 9000 kms.. for 9k kms.. i rode it on Mineral oil using Suzuki Ecstar engine oil.. i want to switch to fully synthetic oil.. Do i need to use engine oil shooter? as am changing from mineral to fully synthetic engine oil? Which Oil is good for Gixxer SF? 10w40!!
I have a small, 110cc moped bike as a daily rider for 8 years and its engine is properly maintained, never had any engine problems. Is it beneficial if I flush the engine before oil change? Thank you ✌
Then you can go for engine flush. 2000km drain interval must have kept your engine clean from sludge build up, still 8 years is a long time so flushing the engine can be a good practice. Make sure you follow the steps and procedure as shown in the video (ex: don't accelerate the engine when running with flush).
Excellent video as always. Your quality content is what I can see with increase in number of subscribers (I subd you at around 500 and now its 12K) Keep up !! :)
Which is the good engine flush lube for bajaj pulsar 220f BS3, bike total odo is 57000km till now. I haven't flushed the engine till date. Bike is maintained properly.. suggestions ?
hello sir i like your video as you give the information in a simple way and it is effective too and i have a one questions can we use the 10w-40 grade liqui moly in duke 200???
Hello Sir. I've a classic bullet 350 only run for 3100 kilometres. Do you recommend I use oil flush? If not, by what interval can I use the engine flush?
I have tvs ntorq. Usually I am using tvs recommended engine oil. Now I'm shifted to liqui moly engine oil. I want to know can I flush my engine? My ntorq is running 8500km is it right step??
Then you can skip the flush and directly go for an oil change. You will find comments on the channel where a few Ntorq riders are happy with the performance of 10W-40 oil: amzn.to/2Sst9X5
Brother need a suggestion, My bike is brand new ran about 2200 km on 10w40, But now I'm changing to 20w50 as it's summer, Do I need an engine flush before I do it?
Hello plz reply. Can engine flush remove corrosion ? Water gets into engine and mixed with engine oil. What can I do. Some one suggest to flush engine oil with diesel.
Hi bro..should we use engine flush during first service of apache 200 bs 6? My service centre guy told it is compulsory now to do chain lube and engine flush during first service.. Plz reply
The Indian version of MC Garage
Heck no!
I do like this channel and the way of presentation, and more of this. He is definitely giving a right content to his viewers. Good bro. I really appreciate your work.
This doesn't even compare to MC GARAGE but good content anyway.
So true.
हिंदी भाषा में बनाओ हम भी समझना चाहते हैं या सबटाइटल ही हिंदी में भी दे दो।
This is a fantastic video, I thought engine flushing was a complicated process. You made it simple. Thank you.
Man I love you videos.... Simple and informative content.
I don't wanna compare your channel to any other channel but you do remind me of MC garage.
I hope your channel hits great heights and hope to see a face reveal in the future too. 😊
Thanks a lot Luv for the wishes! Means a lot to me 😊
Keep up the good work.
Ecactly..just like mc garage 😍.
Simple and informative..
And we definitely want a guy like ari henning in india..
Yes bro.. awesome YT channel..loved it..👌👌👌👌👌
Look how clean the engine can be after using Liquy Moly oil and engine flush
th-cam.com/video/x4u64lKBbhQ/w-d-xo.html
Before the new engine oil, you can add some cheap oil of same grade and run engine for few seconds so that it can stick the setled flush oil from bottom and then add the bew oil..
It Makes sense, Because engine needs oil for lubrication. what do you think ?
Anyone who makes fun of this legends accent should probably never reproduce.
Your videos are awesome. Point to point information. No bakwas like other moto bloggers. I wish you a good luck. One more thing i want to add is that i am watching you tube more than 20 months on daily basis and subscribed lots of channels in different category but this my one of few comment ever on any video.
I'd say treat the flushing with care as it might clog your oil galleries with deposits. In that case more harm done than good. Basis of a good engine life consists of frequent oil change interval, authentic oil and oil filter plus fuel treatment as it also acts as a solvent inside the combustion chamber.
I change my engine oil for my RC 390 (2016) at every 2500kms, motul 10W 50 with new oil filter. Done 30,000+Kms My engine still looks brand new from inside when sides were opened for clutch replacement.
do you flush your engine every time you change the engine oil? and is it really necessary?
@@HarshSingh-gy4xq I change the engine oil every 2500kms so I don't need to use engine flush. My bikes engine looks brand new from Inside.
@@cranky1812 okay, I have honda shine which has gone 9000kms, and I have changed engine oil 4 times ,and now I will be changing again after 6 months since last oil change, do you think i should flush my engine?
@@HarshSingh-gy4xq no, its ok. You don't need engine flush it's pretty new.
@@cranky1812 oh alright, thanks buddy
Engine flush is not required until you finish 50k kilometre or if the bike is serviced on time
True, if using fully synthetic oil and drained at right interval.
@@thesportztourer 🤗
How about 4 year old bike with 35k km and used mineral oil everytime but timely changed?
@@abhashdc8071 Engine flush is necessary because engine oils are based on petroleum hydrocarbons which decompose and form new compound under heat and pressure which should be removed to increase engine efficiency
Sir im having r15 v2.. 3 yrs old bike but kms 16k only has done... Need to put flush or not? .. And motul 300v and liqu moly which is best sir
I'm watching now all the Videos of Past 2 Years. I'm a New Subscriber.😀
Very simple and informative content.. Just love the no Bs content.. Keep doing the same buddy and success with follow up soon
Thanks a lot Jai for appreciating the efforts and valuing the content! Your love and support means a lot to me 😊
Does Unocorn 160cc have an oil filter?Last 4 years been changing the oil no sign of oil filter.2)In yourpervious video wherin you add the liqui moly Mos2 shooter engine oil additive,I guess you have not mentioned the number of times one needs to do it,for eg- Does it need to happen with every oil change?pleaae reply.
Subbed for the awesome quality content.. 👍 keep them coming..
Thanks a ton Prashant for the awesome appreciation! subscription is always a BIG motivation to make more such content 😊
Very helpful video bro..liked your way of explaining with very decent English
Feeling happy...
Show your face infront of camera ,it was an good communication ....
great video sir, i have a doubt im riding a pulsar 180 almost 15 years old maintain regularly and properly but uses mineral based oil and clocked 1 lakhplus kilometers on it. should i do a engine flush or not ?
Similar situation . Please reply.
The most satisfying for a biker is the old oil coming of the bike and I always love to change to oil all by myself thank you bro I always love your vedios please give some tips how to maintain the milage of the bike and also if you have any scooter with you please make a separate vedios for scooters too it will be helpful
Thanks a lot Raheel for the appreciation and suggestions, your points are noted 👍
P.S: I can totally related on the oil change satisfaction part 😊
@@thesportztoureruse karna chaiye ?engine flush
OH MY GOD ! I was desperately looking for a review of this product. Here you came for a rescue.
After riding 30K KMs since inception using Yamahalube Sporty premium, before migrating on to a premium engine oil ( LM street racer) in my Yamaha R3, I used it.
I must say! Your advice and procedures to use this product worked like a charm.
While draining oil after using this for 10 to 12 mins, I found the oil was darker in shade and dirtier than ever before.
Than I poured in Liqui Moli Street Racer.
Now I am thanking you .
❤
Should we do an engine flush for a new bike, I mean the 1st break in service of the bike?
Hi Karteek,
Not required, a brand new engine will have no sludge deposits with negligible presence of carbon. A regular oil change (with oil filter, if present) will be fine.
@@thesportztourer Bro mujhe english bolni aati nahi hai zyada but ek cheez zarur pushna chahunga ki kitne kms or Time par engine flush krnachahiye
Karteek Varma no! 50 thousand miles/kilometers only and not necessary at all if synthetic oils are used!
U have the best way to explain things. U will do wonders if u become teacher/professor.
Thanks you so much for the appreciation! I am taking your comment as a BIG compliment 😊
How is Liqui Moly over Motul 300v.
I have the same question too
Motul 300v is always better than any full synthetic oil..
The oil base is different on both these oils so a detailed comparison will be interesting, what say?
After using the 300V 10W-40 on the RTR 200 (I hope you have seen the Rajasthan ride series) we were tempted to try the 300V 15W-50 on the Dominar but we were concerned about changing the winter grade. My experience with Liqui Moly on my car was great so thought of giving it a try and the most important it was available in 10W50 fully synthetic grade so went for it (expensive than the 300V). For now the experience is good if not better then at least it's on par with the 7100 10W50, let's see how it performs on long term 😊
@@thesportztourer thanks for your insight
The Sportztourer Will there be desired result, if Liqui Moly engine flush and fuel shooters used with 300v, a bit sceptical as im about to replace my bikes oil.
Bhaiya sabse pahale aap ko congratulations 12k subscribers ke liye and mere best wishes aap ke sath haan...this video more informative...😊
Thanks Akash wishes k liye 😊 Acha lagta hai aap k comments read karne mein.
Great video, your DIYs are on point and very helpful. I own a fzs v2 and ride it very less approx 1200-1500kms a year. The oil change interval recommended by manufacturer is around 2500-3000km so I change my engine oil at an interval of 1.5-2 years but I always keep an eye that it does not get low. Does engine oil degrade over time or is it ok to just change at manufacturer recommended kms irrespective of time.
Times also matter.....
Hi Rajdip,
For a low running engine change the oil every 1 year 👍
Use mineral oil instead
I was waiting for this from you
Hi Saurabh,
So did you like it?
@@thesportztourer yes.. obviously
Old technique is to put 50 to 100 ml of petrol in engine and run it for 5 minutes remove oil your done still works well
never do that. petrol doesnt have lube. it'll cause wear and tear
Dangerous bro
Honda livo and sp125 both of these bikes which is better for beginners....?
Informative,!! I'm going to try the flush liquid on my Fazer which has clocked 25k.
Did u used engine flush ?? How was the experience ?
Flushing is no doubt good once in 25-30k km but how do we get rid of the residual flush sitting inside the engine as we cannot drain the engine oil completely?
Though my engine has 2 litres oil capacity, replacement is 1.75 litres... That 250 ml is still old and mixed with this flush.... Can this cause any issues with the engine component?
Your speech tone is pleasant to listen.🤗🤗🤗
Thank you so much for the compliment! You made my day 😊
We can use diesel as well. Works like a charm. I used 1litre to flush
Bruh 💀
Nice and very informative video
Hi Pritish,
Happy to know that you liked the video 😊
@@thesportztourer yes brother I liked all your vedio brother. Very informative video. I can't find this type of informative vedio. I really enjoyed your all vedio. It is really very helpfulI to me. Iam planning to purchase TVS Apache 200 4v non-abs model. Is there any issue of non-abs model. I am very tight budget. I can't afford abs model.
Hi mate, excellent video with great commentary.
Looking forward to checking your other videos.
Thanks.
Its a joy to know that you liked it! Welcome to the channel 😊
flushing engines is stupid.
use good oil and change it on time with the filter. it's that simple.
this is just snake oil
Not really, even if you use good quality oil the engine oil does break down and does form sludge, the issues do happen even with best oil.
Anti slude does indeed work, but yes this is no substitute for changing oil on time and using good filters.
This is just an add on maintenance thing for best results, it's not a thing you have to do during every oil change but you can do it once in 10 or 20 k kms
@@hiteshadhikari in the US these are concidered snake oil. You're better off changing the oil on time and using a decent filter.
@@ashishpatel350 snake oil is a different thing or concept. If something says it will magically improve your power or milegae to unbelievable extent then the item is often termed snake oil
The concept of snake oil is when people think basic additive or item will transform their vehicle beyond anything
@@ashishpatel350 like a good synthetic engine oil will improve your vehicle performance by 5-10% over original/mineral oil is still a thing that happens but if someone says that put this oil and all your issues will be solved, it will repair your broken engine and like imporve performance and make it double etc thing then that product is termed snake oil
@@hiteshadhikari all good oils have anti sludge additives. They are called detergents they dissolve any sludge and suspend them in the oil.
Like I said these are snake oil. If you have sludge in your engine it's due to not changing the oil on time. Which ussually means you have bigger problems with engine.
I'm using hero Honda CBZ Xtreme which completed 54000 KM's, can I use this for it?
No need to use any of this shit .. its actually hurt engine..
If it is not done it will hurt ur bike's engine LOL
You are right. Present engine oils come with cleaning agents present inside them. So it cleans the engine continuously.
If we use flush it can damage the bearings.
True
If one maintains the bike, replaces oil regularly then this shit is not even required. these are all marketing tactics to drain money!
No its not for new vehicles. For old vehicles might hurt because all the sludge and gunk which is preventing the oil to leak might break down with the engine flush. And your old vehicle will come out a white smoke from oil leak. And also depends on the engine flush you use. If you use cheap product of course it will hurt your engine.
Before you add engine flush, do you first drain out existing oil inside engine or you add the engine flush to the existing oil?
Hi,
Add it to the existing oil.
The best bikes information channel. Thanks a lot
Very good video I understand each and every thing how to maintain our vehicles thanks
Thats great! Happy to know that the videos have served the purpose 😊
Excellent video! Nice camera shots
Subscribed. Awesome content and very lucid explanation. Continue this awesomeness !! Cheers 💐
Thanks a lot for appreciating the content! Subscription is always a big motivation to make a more such videos 😊
Very Professional 👍👍👍
Bro my pulsar 220f all engine seal damage when I used liqui moly engine flush..now what I do..
Srcice centre has put wrong oil grade. I will change it immediately. Do I need to change the oil filter as well? It's a new one
Good video bro. Keep up the good work. Nice explanation with correct video.
Thank you so much George! Glad to know that you liked the video 😊
My Dominar got the problem of coolant leaking into the engine. The problem is fixed. I have done 30k kms as of now. will using a engine oil flush good for engine ?
Hi,
So you have replaced the gasket?
@@thesportztourer only oil seal from where coolant was getting in
i detectef the problem quickly without wsiting for lot of coolant getting into engine
Good, quick actions like these helps in saving the engine from any critical damage.
Should we drain a little bit of oil before poring the flush into the engine.
No
I own an Apache200 4v...2016 registered date....never flushed since then.
Should i go for the engine flush ???
Descent video .. I liked it.. well done bro.. nice video
Thanks for the info! I have 10k-15k more kms to go before a flush.
thanks god subtitles exists
Thanku for awesome video 🥰 sir should i go for engine flush if i gonna switching from yamalube 10w 40 sl M to motul 7100
Odo done 5000 and oil change interval 4000 km plz suggest 🙏🙏
You can skip the flush and directly go for oil change.
Thanks a lot for the awesome comment.. happy to have support from enthusiasts like you 😊
@@thesportztourer sir thanku for your reply 🥰May I favour a request more that i have Mt-15 which coolant is low should i topup the motul coolant to yamalube coolant or i have to do a coolant flush 🙏🙏
Excellent video. I have a question for you though, since we all are elbow grease lovers, we tend to do a lot of maintenance ourselves. However, where should we dump the old engine oil after removing it? Here in Mumbai it’s not allowed to drop it in the sewage line, so where to dump it?
In America, we bring them to auto part where they recycle the used oil. Don't dump in trash care or sewage line because it will contaminate your water supply
Bro i own a FZ V2 which has run about 5000km but the engine feels very harsh and noisy after just 10-15kms of riding so will flushing the engine solve this problem pls reply asap
Hi,
Which oil are you using now?
@@thesportztourer yamalube which Yamaha recommends
If you are using the mineral base Yamalube optima or optima prime then I would suggest you to go for a better synthetic base engine oil like the 7100 or ultra. Just make sure you go with the right grade: amzn.to/2LTUy2u
Broda, I have bought new bajaj P220F ABS And I have done First Service At 490km But I'm willing to Change Engine Oil at 2500 or Within 120 days but i will get motul 5100 Semi Synthetic Engine oil for My New bike and probably would change it through outside, not by bajaj service center because i know a experienced neighbor mechanic who is my good friend so now My Question Is Do i need to do engine flush before installing new Motul Engine oil ? cause my bike already got bajaj oil in it !
very nice brother........
informative
Best channel without any unnecessary over action and trash.. everything is well explained and clean..👌
Thanks a lot Vidya Sagar for valuing the videos and awarding the best channel title, means a lot to me 😊
Video was quick n very informative
Thanks a lot Amrut for valuing the video 😊
Hii bro 🙂🙏🏻
Your videos are awesome nd perfectly shooted,clear and lovely voice and simply with properly explained videos i watched your videos jo muje dekhne ki zarurat bhi nahi thi but maine full videos dekhi kya jaadu hai apki voice me aur samjhane k way me
Wow bro carry on
Wese sorry mujhe proper english aati nahi hai maine comment me Hindi mix kar di 😔😂🤗♥️
Brother mere pass 160 4v hai aur usse related videos find rha hu apke channel pe 😂😂
Thanks a lot for the wonderful words! Yaha pe aapko kaafi 200 4V k videos milenge jo 160 4V pe applicable hai 😊
Does the engine flush traces in the new engine oil left by the old one harm the engine??? Is it good or bad for the engine's life due to these little engine flush traces?
As already said by Mr Luv kumar, i also want to say the same that your content is very informative and simple.
Keep it up and one day you will hold a repo as good as MC garage.
I have Thunderbird 350 bs3 model 2017.
I am changing oil for every 3000 km. Using liquid gun mineral oil (those days they have only mineral oil), now switched to semi synthetic oil liquid gun as company prescribed.
Please let me know which is the best oil synthetic or semi synthetic or mineral oil for Thunderbird 350 bs3. Also which brand is good. What about draining intervals? May i go with flush when I change the oil everytime?
Should i use the flush to clear the previous oil in the engine? I have been using TVS Tru4T.
Hi, the Dominar 400 uses two methods for engine oil change. One of them is what you explained in the video. Have you ever tried to completely drain the remaining oil? If so, please share your experience.
Hi, once again! Does the engine flush compromise on the leftover engine oil in the Dominar?
Hi Rohan!
I have explained about the leftover here: th-cam.com/video/nu7JoJTo8JE/w-d-xo.html
@@thesportztourer , thank you
Do we need to flush even for non gear vechicle bro like honda dio??
I got an shand 11year old bike (125000Km) where it used proper motul fully synthetic for past some years. I am thinking of flushing it and fill it with motul. But as you said not thanking to rebuilt engine since engine is fine. What you think, i should flush it or not with liqui moly?
Great tutorial and editing
My bike is R15 v3 2018 i can do it ?
After engine flush it is mendatory to stroke it again with mineral or semi synthetic oil bcoz engine flush liquid removes the zink coating which is applied earlier by strokint the engine which prevents the engine metals to teardown and make the engine smooth
Hi Supratim,
Thanks for the information. Any specific way to coat that?
I have hero passion pro year 2015 I do regularly change engine oil and do service still for my peace of mind I want to do engine flushing , what you suggest what to do and what not to do for my bike?
Umm must say underrated channel.
Can we use car flush oil in bike engine?
What will you do with this used oil
Drink it..hahaha..
@@jamaludinshamsudin4821 oh!!! That's good..... U must have tried it..... Good for u 😁😁😁😁
Should I use V Power in apache
Which engine flush is good for Scooter?
I had flushed my engine and put liqui moly 10w40 street race after 3000km my stupid mechanic topped up my engine oil with semi synthetic oil ..should I again use engine flush when I add new engine oil ?
Superb... Crisp n clear... 👍👍
Thanks Madhu Ramarajan for the appreciation 😊
Nice video very finely explained
My mechanic changed engine oil and added the Engine Flush to the new oil... Please suggest if I should ride the bike or immediately change the engine oil again
I have riden 10kms post this oil change, engine felt relatively smooth but i know engine Flsuh will hinder proper working of lubricarion
Hi,
Unfortunately in this case we have no other option other than changing the oil. Go ahead and get the oil replaced.
I have a hornet160r & honda recommends 10w30, plz suggest which brands would suit apart from honda engine oil? I've used Motul 1.2 4t 3000 4t+ 10 w 30 premium mineral ma2
4 stroke but issues with gear and pickup...plz suggest
Hi,
Your Hornet deserves a better oil than the 3000, you can go for 5100. Just make sure you go with the right grade: amzn.to/2OTXV77
Hey, My Bike (2019 gixxer sf bs4) has done close to 9000 kms.. for 9k kms.. i rode it on Mineral oil using Suzuki Ecstar engine oil.. i want to switch to fully synthetic oil.. Do i need to use engine oil shooter? as am changing from mineral to fully synthetic engine oil? Which Oil is good for Gixxer SF? 10w40!!
I have a small, 110cc moped bike as a daily rider for 8 years and its engine is properly maintained, never had any engine problems. Is it beneficial if I flush the engine before oil change? Thank you ✌
Hi,
What's your regular oil drain interval?
@@thesportztourer I change at 2000 km interval
Then you can go for engine flush. 2000km drain interval must have kept your engine clean from sludge build up, still 8 years is a long time so flushing the engine can be a good practice. Make sure you follow the steps and procedure as shown in the video (ex: don't accelerate the engine when running with flush).
@@thesportztourer Noted, thanks for the advice ☺👌
Do we need engine oil flush in 100cc bike, it Yes then after how many km
Is it necessary to flush engine on each service?
Excellent video as always. Your quality content is what I can see with increase in number of subscribers (I subd you at around 500 and now its 12K) Keep up !! :)
Thanks Preetam for supporting from the beginning 😊
Awesome video brother, much informative... Keep going... 👍👍👍
Thanks a lot for valuing the video. I am glad to know that you found it informative 😊
Which is the good engine flush lube for bajaj pulsar 220f BS3, bike total odo is 57000km till now. I haven't flushed the engine till date. Bike is maintained properly.. suggestions ?
Pulsar 220 2015 model does not have an external oil filter. How do I work on that?
Thank you
hello sir i like your video as you give the information in a simple way and it is effective too and i have a one questions can we use the 10w-40 grade liqui moly in duke 200???
Thanks for making this video ... Keep it up bhai
Most welcome 😊
@@thesportztourer Bhai please make one video on what accessories you use while vlogging ...
Amazing video as always 😍😍
Thanks a lot Pankaj, Happy to know you liked it 😊
@@thesportztourer 😁😁
Hello Sir. I've a classic bullet 350 only run for 3100 kilometres. Do you recommend I use oil flush? If not, by what interval can I use the engine flush?
Hi Anees!
3100km is too soon to get the engine flushed. You can skip the flush for now and directly go ahead with engine oil and oil filter change 😊
@@thesportztourer thank u
Thanks alot for this informative video...I love your channnel man.
Hey, I have Apache RTR 160 2012model I brought it in seconds so I don't know hw it has been used , so can I flush it ?
I have tvs ntorq. Usually I am using tvs recommended engine oil. Now I'm shifted to liqui moly engine oil. I want to know can I flush my engine? My ntorq is running 8500km is it right step??
Hi Amarnath!
Whats your usual oil drain interval?
@@thesportztourer my oil drain interval limit 1500 km...
Then you can skip the flush and directly go for an oil change. You will find comments on the channel where a few Ntorq riders are happy with the performance of 10W-40 oil: amzn.to/2Sst9X5
@@thesportztourer thanks
Brother need a suggestion, My bike is brand new ran about 2200 km on 10w40, But now I'm changing to 20w50 as it's summer, Do I need an engine flush before I do it?
Hi!
Which motorcycle? What's the recommended grade?
Hello plz reply.
Can engine flush remove corrosion ?
Water gets into engine and mixed with engine oil. What can I do. Some one suggest to flush engine oil with diesel.
Hi bro..should we use engine flush during first service of apache 200 bs 6?
My service centre guy told it is compulsory now to do chain lube and engine flush during first service..
Plz reply
Thanks for the information as usually good job👍
Glad to know you liked it and found the video informative 😊
I have a pulsar ns200 bs4 and my bike run 13062 kilometers still now, plz tell me within how many kilometers engine flush use?
Can u plz suggest me a fully synthetic engine oil which is suitable for access 125..??