TFS - Ford F-150 Ecoboost Testing FREE Mods!
ฝัง
- เผยแพร่เมื่อ 19 มี.ค. 2018
- Welcome to Season 4 of The Fabrication Series!
We got our hands on a 2014 F-150 3.5 Ecoboost and we decided that, before building it, we'd give these so called "free mods" a shot since the requests were rather overwhelming.
So here they are! How "free mods" for the F-150 actually work along with the factory stuff and even some ridiculously detailed jargon in fine TFS fashion.
Tools & Gear We Use and Recommend
www.amazon.com/shop/thefabric...
Learn How to TIG Weld HANDS ON!
thefabricatorseries.com/classes
Subscribe to my channel for MORE!
Check out the website: www.TheFabricatorSeries.com/
Like: / thefabricato. .
Follow: IG @The.Fabricator / the.fabricator
-------------------------------------------------
Music - Because atmospheric lodgement cases constructed from semi-synthetic polymodial amitradic structures.
Beach Bum - Happy Rock, Cool Intro - Stings by Kevin MacLeod and Progressive Rock, Rock Intro 3 by Audionautix is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/...)
Source: incompetech.com/music/royalty-...
Artist: audionautix.com/
That is all. - แนวปฏิบัติและการใช้ชีวิต
![CAMPปลิ้น | EP.76[1/2] โจโฉเปิดป่าโหดรับโอ๊ต-ป๊อบ รอบนี้พี่เอาจริง!](http://i.ytimg.com/vi/pNg5O7Pf-a0/mqdefault.jpg)
Who the hell gave this guy a thesaurus?
No shit haha
Ford makes them from recycled aluminum beer cans and I guess recycled 2 liter empty drink bottles for the oil pan can you say ( CHEAP CHEAP ) made high dollar junk rear doors that might work or might not work it all depends on the cold weather I would get rid of that high-dollar junk !!!
🤦♂️🙄🤣🤣🤣
Closet tweekers with skizzer hoes on benzos.
@@rodneychapman1506 a 14 is steel bodied, but ok
I loved the turbo encabulator explanation 😂
thr first 2:30 seconds i felt like 4 years of college wasnt enough and i felt absolutely clueless as to what you were saying lol
no teleprinters wow so much effort you put into this and well worth it. it
amazing
The best mod for the intake would be individual intake tube and filters for each turbo so it doesn't have to battle air turbulence
Ok I was going to ask about this, I’m going to be installing a cold air intake with a separate intake tube to each turbo…..should I take those out?
@@AAAstroPhotography I installed a dual filter cold air intake with separate tubes etc took out the diffusers and it actually killed my low end acceleration . not even sure why so i went back to a merge pipe cold air intake with the twirlers diffusers back in.
@@rkolonich I took them out and been running my dual tube cold air intake with no issues but maybe I’ll throw them back in and see if it makes a difference!! Thanks for the tip!
@@rkolonich what brand did you use I just ordered the aFe one and I am planning on taking out the diffusers
Totally agree, did my research before adding intakes to the 3.5 ecoboost limited.
Hahahaha dang dude, how you got through that bs with a straight face and no cue cards is beyond me.
He's a mechanic, those are the skills you need
😂😂
one of the best mod videos for the ecoboost f150 i have seen i love how you can explain and test the mods
Your imitation of the “dude bro” in his dads truck is so perfect I subscribed immediately 😂😂
From a tech of 31 years pretty much it . Alot of this stuff is to dampen noise. Free up restrictions and let the good times roll.
I love it! a new modern rendition of the Retroincabulator!
he who has the most welders wins good video👊
You’re very knowledgeable and fun to watch, subscribed.
"Suck, squeeze, bang, blow" is what an engine does? Giggiddy
"I dont see any cops"
Something I say more often than I should while driving...
Good T-shirt for this channel...
I like how in depth you get
Your one of the Most entertaining and fun guys to watch on Utube!! Great and informative video. Thanks!!!
Removing the complete intake system did not throw any engine light codes?
Awesome content!!! Above and beyond man!!!
Too bad the air flows DOWN though those those pipes and those inserts are BEFORE the compressor turbines
I still can't believe that you were driving around with two big unfiltered vaculum cleaner's sucking in contaminated air to the internals of that expensive engine because you want to hear your turbos.
Witty sarcastic humor it’s like a breath of fresh salty air after coming up from scuba diving well played sir driving with people wondering why I am laughing like a hyena!
I been contemplating over what route to go on my 3.5 exhaust and mods. TY. Subscribed!!!
Thanks, LOL did like the blow-off valve, I understand you can get larger ones that get rid of that pressure quicker and yes it might be a bit louder than stock. Is it beneficial?
You nailed the first part of your video.
Coming to the game late, Justin, you are awesome. Just found you thank you for your wealth of knowledge and your middle of the road approach. You are an awesome young man!
I'm not going to lie... I burst out laughing at the exhaust sound. That was too funny.
With the blow off cap aren’t there two turbos on the 3.5 eco boost. If there are two would you cap both. I saw a pretty nice intake from afe that had each turbo intake tube separated to eliminate the turbulence issue in the stock intake.
When I had a 14 F150 ecoboost. I made a larger intake area in the dirty side (bottom) of airbox, enlargened the intake hole towards the front of truck for cold air. Then I removed the factory boat anchor muffler and resonator and replaced it with a performance flowmaster style chambered muffler. Truck dyno'd at 392 hp and 428 torque at the rear wheels. I was very happy with those simple budget mods. I now have a 2020 ecoboost F150 which I will do the same mods to and see if it is better than the 2014 was back then.
Made it bigger? You mean by making bigger holes, for the air to go in?
Great video! Just subbed!
I am impressed by the VP word salad, then your true explanation in the intake air flow.
If you get exhaust dumped out on the side it sounds way better. I had it just deleted and yes it was way to loud and too much drone. For $146 I had muffler shop run 3" and dumped it in front of passenger rear wheel. I took stock chrome tip and put it on the end. Looks good now and sounds way better
Good stuff my friend.
I enjoy the VTA mod myself. It is cool, I have been running it about a month now that way and I still enjoy it. If I don’t wanna hear it, I just go back to enjoying the radio.
Thanks for the video, what do you think about oil catch can
Allrightythen !! I'll just look for a late model 90'S Ford F150 with the 5.0/302 and run dual exhaust ! There are some out there that still have decent mileage, and are 8n great shape that someone's Grandparetns passed away, and see this old truck as a bothersome gas burner that doesn't comply with their environmentally friendly Prius, Volt, Leaf, EFTC. !!!!
GREAT VID !!
And junk that GDI trouble at the same time
I'd have to say I got alot of good smiles out of that one!! I might have e to try the blow off trick!!
Lmao thats quite the explanation
Thank you
what is your follow up video to fixing the exaust?
There's a fairly simple was to quantify and differences in power... A dyno. If the difference is less than a few HP, that's attributable to margin of error.
This is the non tattooed, mechanic version of Amiri King🤣
Bro this was HILARIOUS!!!
I did a custom 3" resonator and Flow FX muffler pre-axle side exit, sounds very nice off the 3" SPD pipe.
This was very entertaining, gained yourself a new sub!
This dude is freakin awesome!!!
Question:
Any benefits to keeping the vent recirculate back to the intake? Does the pressure help the turbos? Does it change mileage or anything like that? Bought my 2012 from a private sale, and they already have a cold air intake, with both sides vta and capped on the intake.
Can the intake defusers be removed if you install a dual-tube CAI, like the aFe?
Don’t you have the intake backwards? Why is the air in vortices coming in from the air filter?
As a teenager I’d do all these mods but with the exhaust put pipe back to the tip and maybe replace the tip just to have all the up the sound of the exhaust and turbos and blow off valve so pretty cool video
It’s been awhile now, any knew evidence about the diffusers doing any harm once removed?
very cool show
Love your approach to explaining simple facts. Made me smile.
Checked your channel and can't find the follow up exhaust video. Link?
After you take off the recirculation tube, since the blow off valve is low on the ground, when it rains or you go through water, isnt water going to get in the blow off valve?
He said no because it's electronic, not mechanical, and there is only positive pressure when blowing off
I love the Chrysler turbo encabulator style. Lmao.
I'm manufacturing engineer for automotive induction and that was still so extra LOL
...but I loved it
Can I remove the diffusers from my expedition 2015 twin turbo? Is there any harm?
@@darkills1384 The reasons for them can vary between turbo sound suppression to spinning the air so that the compressor can "take more" air. To answer you though, no you wont notice a single difference, except maybe some more turbo spool noise.
@@RideFixRepeat 👍
Smart my friend
When is the video of the new exhaust going up?
Two years later and I still havent seen it.
I removed my intake silencers and love it. Sounds awesome but I can barely hear it over my borla atak exhaust lmao. But I personally have seen gas mileage go up. On a good day, I can pull 20 hwy with the 2.7, leveled on 20x10s and 35s
Informal fuel economy test with the vortex tornado thingy's in the intake:
2014 F-150 w/ 3.5 eco.
Drove about 500 miles / 7 hrs. with them in one way on a road trip. Then removed them before returning home. According to the truck I averaged 18.4 mpg with them in. 18.7 mpg after "delete." No info as far as power but throttle response does seem to improve, but just barely and only based on my opinion. Also definitely can hear the turbos better, but again, only slightly. Hope someone else finds this interesting / informative!
Thanks for the great video.
Idk why, but my 14 eco boost f150 only gets about 14 if I stay out the throttle, however it is 4x4 so idk if thsts got anything to do with mileage, never really pay attention to the mileage till I'm on a road trip but it's also got a 36 gallon fuel tank on it
@@insertnamehere4143 I think we have the same setup! I did the same trip recently and only averaged 16 miles per. Driving conditions are a huge variable. Anytime you're in boost your millage will take a hit. (Not as fun to drive a boosted engine w/o boost tho!) Things like traffic, hills, big wheels, definitely affect millage. Maybe worth it to make sure your rotors aren't warped as well, those suckers get hot. That being said, there doesn't seem to be consistent reasons why the mpg's vary so much from truck to truck. There's quite the rabbit hole to go down looking for answers haha. Recently I've been debating removing the intake and cleaning the valves. Thanks for the reply!
@@CodyTres7 mine if I reset the mpg, it'll say I'm getting 20 but over the course from SC to MS it drops to 12
I fell out of my chair laughing at the Rockwell Encabulator intro! Thinking of doing some work on my ‘13 boost. Not sure Id do any of these. Probably gonna start with an ECU tuner.
When my vortexes merge, I get a thunderstorm in my intake. Sometimes tornadoes. Makes the truck burn at a more efficient stoichiometric ratio, and I gain 2,000 hp. Facts
Hey TFS did you get a Check engine light when you cut that exhaust off
Did you ever do an episode on the mufflers? Wondering what type you went with?
Which video is where you install the muffler and, what looks like a resonator pipe? What you showing at the end of this video.
I know the same feeling with the exhaust delete. I got a coupling rust away from Michigan salt and slamming the gas makes it sound like hot garbage. Ecoboosts need some pipping.
Looks like your shop is right up the street from my buddy's. Mine is near Charleston/Eastern.
The Fabrication Series ,You need to spray that ratchet with some PB Blaster😂
How is removing those blades upstream of the turbos creating turbulence upstream of the blades? I think you explained it backwards. Those blades smooth out the turbulent air coming from the y pipe... Supposedly. I recall a sold on TV product that was essentially one of these that was supposed to increase mileage etc that's been debunked many times over.
exactly the key word is intake so there are no turbulence going up to the air cleaner. he can also do as I did add two independent air cleaners at the inlet side and do away with the air cleaner period.
The v6 sound actually kinda grew on me. If it wasn’t turbocharged it would sound like crap but I ran a straight pipe on my 2011 and it really wasn’t too bad
I just unbolted it at the resonator so no muffler or resonator, sounds great
@@bostonseifrit3684 no, no it does not .
did the vta three years ago and no problems at all
So i just took my "diffusers" out and if they serve no purpuse but to reduce noise, then ill take a little more turbo noise. Not looking for crazy noise but turbos are interesting and cool. Ive been thinking of a cia and might go with the Injen one. Seems well built and they're reputable. Also the dual cone/tubing would elimate that vortex turbulence right? Probally be quite loud also and may end up with the diffusers back in.
Well, did it increase turbo noise for you?
Couldn’t you check the reading of the maf sensor with and without the silencers?
Couldn’t you do your own channel?
Bruh sounds just like a turbo Buick. It is a beautiful sound if you give it a chance.
Intake delete mod- You should have left one of the intake silencers on and get a mix of increase sound and less power reduction.
I’m moving to Australia here in a few months. Do I need to get the turbo’s changed to run in the other direction?
I’d hate to look foolish when it gets there. I’ve already the letters on the dash from MPH to KPH.
I concur!
Nice!!
2 mins in and I just cant........stop laughing 😆 liked, subscribed, shared 👍
I would be interested to see AFRs before and after the atmospheric BOV mod. I don’t know anything about the engine management on eco boosts, but I did see a mass air meter, so I’m thinking it should go rich and stumble on throttle lifts/ shifts? No CEL?
It doesn't use MAF. It uses MAP sensors (one is on the intake box).
Can I do this to a 2015? I'm New to the truck scene 😅 but I doing research to better myself and my truck
1:23 how the tv sounds when your falling asleep
The first part I was like wtf is he saying lol.
I have a 2015 2.7 ecobeast, I took the noise restrictions out about 50k miles ago, trying to hear the turbos spool.....it is still super quiet, windows up,down, I've had friends listen just to make sure I wasn't deaf to that tone but they didn't hear anything either. Is there a reason for this?
I have a 2015 2.7 myself and you can actually hear the turbos spool, they're just not that loud. I'll try this mod to see if the sound increases
Are you easing into it or just putting your foot on the floor ? You wanna ease into it and let them spool up without a super high rpm if you wanna hear them on this truck in my experience. If that makes sense lol
LMAO the marry poppins thing.
take it to the track.
Need to see what you did to the exhaust. I have a 2012 Ecoboost and put a K&N Cold Air Intake in it over a year a go. Definitely can hear a difference. Only thing I have had to replace was the throttle body. Gas mileage is ridiculous. Drove from just west of Rochester NY to Raleigh NC on a single tank of gas...660 miles.
careful with an oiled gause filter, I wore the tips of the turbo vanes off my powerstroke by denying it oil replenishment often enough. Takes alot more maintenence than dry.
@@fiveohgod Mine is a dry filter. Actually just scored an aFe Stage 2 EcoBoost cold air intake for $150 still in the box.
Why did you have to replace the throttle body?
What happens if you only take out one of the dampeners
“Butt Dino”! Hilarious.
That’s your jam.
I have same truck and I saw another ecoboost this one had side exaughst in front of passenger tire ,I asked the owner about he said it was stock but the shop just fabricated stock one can I do that and what should i delete help me modify my stock shit but tight
Subscribed!!👍👍
So any ordinary person who is an engineer who understands fluid Dynamics understands that in some case those things in the pipes are essentially vortex generators, allowing the air to flow less encumbered. Same concept as sandpaper shark shin allowing them to have lower drag whilst swimming through the water.
Lost most ordinary people at: “Any ordinary person who is an engineer” so you mean a unicorn? Yeah they don’t exist.
Soon as he started talking like bill nye I subscribed, plus I have an ecoboost too
I thought this was the fabrication series, I must have hit something similar but for genius's... Hahaha, nice!
Still waiting on the video where you change up the exhaust 😔😄
“Too ricey”😂😂😂👌🏼
Would anyone have any info on how to clean the intake and turbo on a 2015 eco boost?
I removed my rings, drove for a few weeks and ended up getting a check engine light. " low turbo boost pressure" left and right. Re- installed the rings... no other issues. I believe the ford engineers know what they are doing when designing the intake system.
I know guys that have had the same issue and others still no issue for a year . It's odd how the truck react differently.
That has nothing to do with boost pressure fyi
I had the low boost code setting quite a bit... Tried injector cleaners... Fuel treatments etc...Nothing... Codes still set...Then Removed the intake rings... Codes have not been set since... 2015 Lincoln Navigator 3.5 EcoBoost...
My 18 3.5 has the silencer rings removed since I bought it new and no problems, just more whistle.
That’s the system not meeting “factory performance” If tunes properly it wouldn’t be the issue cause the engine is taught to work that way.
This Kansas hillbilly just found this guy. Subscribed!!
Hey brother I got a 2012 f150 ecoboost turbo 3.5L an it can't pass 100 mph can you tell what call cause it.