Budget D16Y8 Turbo Honda Civic Build Under 8 Minutes
ฝัง
- เผยแพร่เมื่อ 20 ก.ค. 2024
- Budget D16Y8 Turbo Honda Civic Build Under 8 Minutes! Taking this beat up Civic we bought and making it a fun little street car without spending too much! Not very much is needed to boost a Honda but here are some steps showing what we did to get it from NA to Turbo.
The car has grown since the first start of this motor, if you want to see more on how the car is running now, check out the playlist below.
• D16Y8 Turbo Ebay Build
This is the setup in this video:
7PSI T3/T4 Turbo
RDX injectors
Chipped P28
Stock D16Y8
If you have any questions or concerns feel free to comment down below or to reach out to our social medias!
Subscribe: / @cjbuilt
Instagram: / cj.built
TikTok: / cj.built
Website: cj-built.com
0:00 Intro
0:46 Intercooler + Piping
1:35 Oil Drain + Feed Fittings
1:43 Clocking Back Housing
1:47 Oil Feed Setup
2:28 Turbo Boost Reference
3:28 Wastegate Install
3:34 Vacuum Lines
4:03 Downpipe + Wideband o2
4:13 Finalize Intercooler Piping
4:40 Oil Drain Pan Fitting
4:57 Oil Drain Hose
5:41 First Startup
5:56 Fixing Wastegate Leak
6:36 Second Startup
7:08 Outro
#honda #turbod16 #turbocivic - ยานยนต์และพาหนะ
I have a 1996 Honda EX Civic, 59k original miles. Show car it’s whole life but has a free add ons. Exhaust, Intake, Headers, etc. . I’m thinking about doing a turbo build on it… hopefully this video helps
I hope this helped!
So satisfying to see the build come together man. Love this compilation brother!
Thank you sir!! 👍🏻
Nice one🔥
🙌🏼🙌🏼 thank you
🔥🔥
where’d you get that oil pressure switch adapter for the oil supply??
I snagged it on Amazon.
Let me get you the link.
GlowShift 1/8 BSPT Male to 1/8-27 NPT Female Hex Universal Sensor Thread Adapter Reducer a.co/d/5tODVTk
✊🏾
🙌🏼
is this stock ecu? is that max speeding rods turbo?
This car is on a Chipped P28 for HTS primarily
Yep MaXPeedingRods turbo 👍🏻
What size for the tap?
Which one? For the turbo boost reference?
1/8NPT
What brand tap n dye set
Snagged the Tap off Amazon. Drill bit was one I had in my older sets
How much would a shop charge to do this
Not quite sure tbh.. depends where you are usually and how much they charge for the labor.
Check out our Wiper Anti-Lag setup! th-cam.com/video/0nY37ACZVIE/w-d-xo.html
What spec is the turbo??
T04E T3/T4👍🏻
Hey, how are you? How can I message you for any questions I have? Im doing a Y8 turbo buuld myself, and I'd like to have as much help as I can. Thank you.
Yeah of course! Email us or message on Instagram and ask anything you need
@@CJBuilt thank you. I sent you a DM on Instagram.
Stock d16y8??
Yep in this video it was a stock D16Y8
@@CJBuiltstock ecu?
what is a vitara build?
No reply = stock rods 🤭
@@Shreddylife Vitara build is a Suzuki Vitara style piston paired with aftermarket rods
@@CJBuilt Nice, I have Vitara pistons and I beam rods in mine as well.
@@Shreddylife Gangsterrr. My bad btw I meant to reply to the OP. Love to hear other SOHC builds!
@@CJBuilt No need to apologize brother. I am new to your channel and assumed you were on a stock bottom end so that is on me. I hope you have as much fun as I have with mine! 🤙
Terbo no water
Nope only oil
How much hp
On 7psi it was about 180-200hp probably.
Could probably push a few more pounds through it semi safely