This is an amazing tutorial! For the PSU I am actually going to drill a hole at the top of the PC case and place this fan grill over the hole so that I dont have to flip it the other way around. You can get fan grills real cheap and so long as you have a hand drill with the right drill bit, cutting a hole shouldnt be a problem. Thanks again!
Glue a 140mm to 120mm fan adapter over that side grill. Then you can add a 120mm fan. The adapter can be 3d printed or on Amazon for $10. I also modified a few to add a 120mm front fan. I used a hole saw to cut a 120mm hole. Used a dremel to make the folded metal flat. Drilled fan mounting holes and attached the fan. I moddified the dvd drive bezel by cutting a rectangle hole in it, the size of the dvd drive. I thinned the bezel down some and glued wire mesh to the back and glued the bezel back onto the case. I used a dremel to cut the psu support lip and made the new screw holes for flipping the psu and moving it further from the gpu. I popped an rtx 3050 single fan card and the i7-7700 processor, 16gb ram, and samsung 970 evo plus ssd. Unfortunately I can't link to pictures but it looks great with some ARGB fans with a controller like the ezdiyfab fans.
I replaced the original HP 570 PSU with the following: a used HP OMEN OBELISK 875 500W 80+ BRONZE PSU. Perfect fit (minus Optical drive power cable). Air cooling fan sucks air from behind PSU so no air flow compromised. I also installed a GTX 1050 Ti to replace the original R9 videocard. PC came with 16GB of ram and i5-7400 processor.
@@MelKottoGrimmlin It's not the fastest PC in the world, but it works without a problem. At least you know you can fit the HP OMEN OBELISK 875 500W 80+ BRONZE PSU if the original one ever fails.
@@lanieperez1370 It should fit without a problem as long as it does not have a big (2 bays size) dedicated video card. Otherwise you may need to cut videocard's shroud a bit. And remember: the OMEN OBELISK PSU does not have the optical drive power cable. PSU sizing: (Width)5-7/8 x (Height)3-3/8 x (Depth)5-1/2.
After seeing those Valorant numbers, thinking of buying it along with RX 6400 so that I don't have to initially buy a new PSU. Total will be under 200 Euros. I will mainly do 1080p Low. Hopefully will get 200 consistent.
Mine is absolutely burning up with the fans hitting top speed. I am now going to start drilling holes in the side and inverting the PSU with the holes I drilled into the top. Kingpin KPX thermal paste too. You should show PUBg and how the fans are screaming on the system b/c of the lack of airflow.......
Hey, I am getting a GTX 1650 Super, and that fan placement is kind of concerning. I have this exact model, and I have a feeling the fans might be fighting for air causing screaming sounds. Though it’s not a big deal.
Hey, I did this 2 years ago, and no longer use that PC, however, it worked perfectly for me! Note that you will have to get another PSU as well, since the default PSU in this housing doesn't have the 6/8pin plug required to plug with the GPU! @@somerandomguy4558 EDIT: You will also need to disconnect the CD Drive. I forget if it is mentioned in the video or not...
I have the same PC (because I can't afford anything better right now) and my main focus is game dev in Blender. Is this the option for best performance from this pc and would it be good for my goals? Thanks so much for this tutorial btw.
How do you get the lame BIOS to recognize the graphics card?? I'm "improving an older lady's computer as a favor. This computer is crap, but she cannot afford to buy a newer one.
Hey man! I saw your video on this and realized my brother had the same desktop and he was using it stock, he had trouble with fps and lag and all that pain. I decided to upgrade his setup, i was wondering if a gtx 1050 ti pheonix fan edition card would fit, would it? thank you!
Was seriously looking to do this, then I hit the links. right now that GTX 1660 Super is over 800 dollars. I really hope graphic card prices start coming down soon.
I put 16 gig ram and a ssd hd chip on the motherboard. And swapped the boot order. And it flys. No graphics card addition. And it is running win11pro. No problem. Less than 100.00. Use the old hd still there for storage
Have you tried upgrading to a SATA SSD? It appears it would crash.. I've tried 3 different SATA SSD's: 870 EVO, 860 EVO (all 1TB) and Kingston 240GB SATA SSD. They all crash at the HP Logo.
Hi there 👋 I have problem soo i have pc i3-7100 /8gram/msi110 pro MB /and i saved same money for gpu is1660s 6g vram and new 500w psu i and as u know i have bottleneck and its down hard on the cpu and gpu soo overheated+ same time crash the pc and fps drop soo im asking you if u can talle how i can fixs it ,and what the best upgrade i mast dras soon as what is the next cpu and I want same cheap solutions and thank you
I’ve never built in one so I can’t say for sure, but if it is the mini tower or full tower version I would say you don’t need the low profile card. But if using the standard PSU I don’t know if there are pcie connections so you may need a card without external power
Yeah I figure drilling a couple holes will solve the issue between the psu and gpu without any extreme case modding. My friend has the same set up and I was wondering how I could possibly upgrade this pc and then I came across this video. Big thank you for doing this 🙏 Subscribed!
@@Paranormal_Gaming_ i will be posting a pic once I do it. Currently waiting for the parts to come in. If you are doing it yourself I recommend getting drill bits for plastic and standard bit for the metal casing at the bottom. That way you ensure you don't crack the plastic. Two ideas: Cut the bottom out about the size of the fan OR drill 5 holes across and 5 holes down with holes being fairly close together should be more than enough airflow for the PSU. If you want dust protection just tape or glue down a small screen mesh sheet at the bottom before installing your psu.
@@nelliocalypse I’m thinking of doing this, but I have a question. I thought you’d just screw holes into the metal part of the case so they’d align with the holes on the PSU. What would be the use of plastic drill bits? Would you be drilling into the PSU as well?
Really depends on your applications, but if your just gaming 16gb should be plenty. And any ITX style card will do, RX5600XT, GTX 1660 (regular or Ti), RX 580 or 570
I installed a zotac 1050 ti mini but it gives me black screen only no display and when i put back my gt 710 it give display . What can i do to fix it help me plzzzzzz
It is most likely a driver issue, so you should probably DDU the old drivers and start the system with the 1050 and the windows will pull the basic driver until you install from nvidia
I have this same model of PC, and the though of removing that much stuff for the replacement is the powe supply is completely mind boggling my goodness. I dont think I can pull it off.
Yes and no. The front panel USB and audio ports are built in. They won't be accessible in an aftermarket case. The case screws don't line up properly irrc so you'll need to zip tie the board in place. Better to keep it in the original case or buy a new/used b150, b250, or b350 board
The HP-lupin motherboard can only handle 16gb. The cpu can easily do 32 tho. You could OC the ram with setFSB, but every reset the OEM bios will reset those changes.
@@TechRoundUp My computer won't detect the graphics card - I've got my monitor plugged in through the hdmi port of the thing - when I got to install the drivers it says it can't complete because I don't have an NVIDIA gpu - im just trying to use a GT 710 2g low profile until the prices of the card you used in the video come down, got it for free. There was already a 2g AMD in there it started blackscreening. Haven't replaced the PSU I have the original in there. Thanks for the response and the video
@@origin3271 some have a 300W PSU like the 570-p020. Meaning no upgrade is needed. The 1660 super will be bottlenecked by the CPU, a 1050ti doesnt require a 6/8pin and will work in the system quite well.
Hey bro, I've been searching all over the internet, but is there a led light plug inside of that pc? like a RGB plug on the motherboard because I cant find it
Is there any other gpu instead of using this GTX 1660 SUPER MINI ITX OC 6G Graphics Card, 170mm Compact Size, 6GB 192-Bit because It's kinda of outta my price range but is there something that could match up with that pc and be a bit lower priced?
@@TechRoundUp question, right now for my Pavilion, the same one as yours, I only have a Radeon R7 200 series, do you think the 500 watt power supply, and the 16gb ram could work with the power supply and the ram stick?
Can you please explain why when i opened my CPU to look at it for the first time in 2 years, i placed it back and it started going really loud and heating up, (that was a year ago) and i know i placed it right on the motherboard and to this day it has not crashed ones or any problems, but on most games it goes really loud and heats up, its really odd, my PC was very quite for the 2 years a year ago
@@TechRoundUp i did replace it a year ago and i was having trouble with putting the fan but the fan has been on the CPU really good for a long time, can the new paste be somehow the reason its really odd, if i put my PC on high % CPU usage it goes louder easier for nothing like downloading a small file
This gives me hope. I've been looking at a pre built for gaming but they're so expensive. I own this exact pc now. Thanks.
I have this pc aswell but UNFORTUNATELY it is the Hp pavilion p33d and the mottherboard 24 pin is blocking the pcie slot ;-;
This is an amazing tutorial! For the PSU I am actually going to drill a hole at the top of the PC case and place this fan grill over the hole so that I dont have to flip it the other way around.
You can get fan grills real cheap and so long as you have a hand drill with the right drill bit, cutting a hole shouldnt be a problem.
Thanks again!
Just don't put your drinks above it and you should be fine, which should be a concern with any tower even without the big gaping hole.
thank you for this. I have this pc and I was so worried if upgrading could even be possible.
Glue a 140mm to 120mm fan adapter over that side grill. Then you can add a 120mm fan. The adapter can be 3d printed or on Amazon for $10. I also modified a few to add a 120mm front fan. I used a hole saw to cut a 120mm hole. Used a dremel to make the folded metal flat. Drilled fan mounting holes and attached the fan. I moddified the dvd drive bezel by cutting a rectangle hole in it, the size of the dvd drive. I thinned the bezel down some and glued wire mesh to the back and glued the bezel back onto the case. I used a dremel to cut the psu support lip and made the new screw holes for flipping the psu and moving it further from the gpu. I popped an rtx 3050 single fan card and the i7-7700 processor, 16gb ram, and samsung 970 evo plus ssd. Unfortunately I can't link to pictures but it looks great with some ARGB fans with a controller like the ezdiyfab fans.
I replaced the original HP 570 PSU with the following: a used HP OMEN OBELISK 875 500W 80+ BRONZE PSU. Perfect fit (minus Optical drive power cable). Air cooling fan sucks air from behind PSU so no air flow compromised. I also installed a GTX 1050 Ti to replace the original R9 videocard. PC came with 16GB of ram and i5-7400 processor.
How does it run?
@@MelKottoGrimmlin It's not the fastest PC in the world, but it works without a problem. At least you know you can fit the HP OMEN OBELISK 875 500W 80+ BRONZE PSU if the original one ever fails.
Would this work on a hp 570-p026?
@@lanieperez1370 It should fit without a problem as long as it does not have a big (2 bays size) dedicated video card. Otherwise you may need to cut videocard's shroud a bit. And remember: the OMEN OBELISK PSU does not have the optical drive power cable. PSU sizing: (Width)5-7/8 x (Height)3-3/8 x (Depth)5-1/2.
NEW SUB I HAVE THIS PC MAYBE NOT THE SAME BUT THE FRONT IS IDENTICAL TO MINE YOU ARE THE FIRST VID I HAVE FOUND HELPFUL 👍🏻👍🏻👍🏻
W video that front panel drove me nuts
That $250 GPU is now over $600 kms
After seeing those Valorant numbers, thinking of buying it along with RX 6400 so that I don't have to initially buy a new PSU. Total will be under 200 Euros. I will mainly do 1080p Low. Hopefully will get 200 consistent.
So what about the thermals? A 1650 in such a constricted case would be getting pretty hot I'd assume
Honestly not too bad, most I saw as seen in the video was around 83C so not great but within limits
thanks dude, i love your video
I did a similar config and the heat is too much for the machine. the fans are a jet engine. wished he showed you temps after a long play.
Mine is absolutely burning up with the fans hitting top speed. I am now going to start drilling holes in the side and inverting the PSU with the holes I drilled into the top. Kingpin KPX thermal paste too. You should show PUBg and how the fans are screaming on the system b/c of the lack of airflow.......
what is the maximum length of GPU can fit if i remove the dvd drive?
That’s what I’m trying to figure out
Hey, I am getting a GTX 1650 Super, and that fan placement is kind of concerning. I have this exact model, and I have a feeling the fans might be fighting for air causing screaming sounds. Though it’s not a big deal.
hey, thinking about doing this aswell, how’s that fan placement/space? thanks
Hey, I did this 2 years ago, and no longer use that PC, however, it worked perfectly for me! Note that you will have to get another PSU as well, since the default PSU in this housing doesn't have the 6/8pin plug required to plug with the GPU! @@somerandomguy4558
EDIT: You will also need to disconnect the CD Drive. I forget if it is mentioned in the video or not...
I have the same PC (because I can't afford anything better right now) and my main focus is game dev in Blender. Is this the option for best performance from this pc and would it be good for my goals? Thanks so much for this tutorial btw.
How do you get the lame BIOS to recognize the graphics card??
I'm "improving an older lady's computer as a favor. This computer is crap, but she cannot afford to buy a newer one.
Hey man! I saw your video on this and realized my brother had the same desktop and he was using it stock, he had trouble with fps and lag and all that pain. I decided to upgrade his setup, i was wondering if a gtx 1050 ti pheonix fan edition card would fit, would it? thank you!
Was seriously looking to do this, then I hit the links. right now that GTX 1660 Super is over 800 dollars. I really hope graphic card prices start coming down soon.
OK but the GTX 1660 Super MINI cost 350-450 dollars.
@@guusoneil8223 the mini he links to is over 800 and on amazon it is over 600. though it doesn't matter now. I have a 512 steam deck coming.
what type of NMVE did you use in your pc build? just a regular one or which?
muchas gracias por este video
i did this everything turned on and the fans were spining but i had no signal
i have the same pc, do you think i would still need a new power supply if i only upgraded the gpu to a 1030?
If you have an integrated gpu like me, reinvest this video ASAP 🗿✅💯
If i wanted to switch case which one would be a good fit ?
I put 16 gig ram and a ssd hd chip on the motherboard. And swapped the boot order. And it flys. No graphics card addition. And it is running win11pro. No problem. Less than 100.00. Use the old hd still there for storage
How did you get it to upgrade to win11? It says cpu is not compatible?
Hey! Is there a different graphics card I could use for around the same price ? Or would you be willing to sell that one?
Any most mini itx cards should work but might want to limit the length as much as you can
Shooot makes me wana try this out and lock it at 60fps connect it tp my tv at medium settings
Have you tried upgrading to a SATA SSD? It appears it would crash.. I've tried 3 different SATA SSD's: 870 EVO, 860 EVO (all 1TB) and Kingston 240GB SATA SSD. They all crash at the HP Logo.
I tried putting an ASUS Phoenix gtx 1050 but the card didn't line up with the back of case and pcie slot.
I can’t believe I just dropped my computer now I have to order another power supply😢
Hi there 👋
I have problem soo i have pc i3-7100 /8gram/msi110 pro MB /and i saved same money for gpu is1660s 6g vram and new 500w psu i and as u know i have bottleneck and its down hard on the cpu and gpu soo overheated+ same time crash the pc and fps drop soo im asking you if u can talle how i can fixs it ,and what the best upgrade i mast dras soon as what is the next cpu and I want same cheap solutions and thank you
Hi, can u confirm of the hp elitedesk 800 G1 TWR needs a low profile card ? Or can it fit any size ?
Really would appreciate it !
I’ve never built in one so I can’t say for sure, but if it is the mini tower or full tower version I would say you don’t need the low profile card. But if using the standard PSU I don’t know if there are pcie connections so you may need a card without external power
@@TechRoundUp I'm pretty sure it's mini tower and I have a 320 W PSU
So I'm probably still goin for the 1650 since my CPU is the i5 4590
How is this pc holding up? Doing an upgrade for a friend. I have considered drilling at the bottom of the case so I can face the psu fan down
It is doing pretty well, but that option could yield some really good results
Yeah I figure drilling a couple holes will solve the issue between the psu and gpu without any extreme case modding. My friend has the same set up and I was wondering how I could possibly upgrade this pc and then I came across this video. Big thank you for doing this 🙏
Subscribed!
@@nelliocalypse Picture??
@@Paranormal_Gaming_ i will be posting a pic once I do it. Currently waiting for the parts to come in. If you are doing it yourself I recommend getting drill bits for plastic and standard bit for the metal casing at the bottom. That way you ensure you don't crack the plastic. Two ideas: Cut the bottom out about the size of the fan OR drill 5 holes across and 5 holes down with holes being fairly close together should be more than enough airflow for the PSU. If you want dust protection just tape or glue down a small screen mesh sheet at the bottom before installing your psu.
@@nelliocalypse I’m thinking of doing this, but I have a question. I thought you’d just screw holes into the metal part of the case so they’d align with the holes on the PSU. What would be the use of plastic drill bits? Would you be drilling into the PSU as well?
Is it okay if my gpu is half the size of the gpu slot length wise? I found a low profile 1030 I plan to use
Ain't got video signal before change the graphic card, I have a 600w PSU and same CPU & motherboard
Did you connect the cable to the graphics card?
@@SomerandompersonYT7557 Do you know that water is wet?
@@MangueraPrime yes? What does this have to do with anything?
? I have hp 570-p0xx.. can I add 2 sticks ram of 16gb each 3200 to give it that extra ram.. would it be noticeable.. I m thinking doing ur set up..
Also which other graphic card would you recommend due current one n/a in Amazon
Really depends on your applications, but if your just gaming 16gb should be plenty. And any ITX style card will do, RX5600XT, GTX 1660 (regular or Ti), RX 580 or 570
i have the same pc and it is all right but I wanna upgrade
Did you find a solution for power?
I installed a zotac 1050 ti mini but it gives me black screen only no display and when i put back my gt 710 it give display .
What can i do to fix it help me plzzzzzz
It is most likely a driver issue, so you should probably DDU the old drivers and start the system with the 1050 and the windows will pull the basic driver until you install from nvidia
@@TechRoundUp i did that too but it didnt display anything except black screen
I'm planning on getting this graphics card. What else do I need to install? By the way, I have the same model of the computer.
Power supply
@@TechRoundUp Does it have to be a new power supply or the one I already have? I have an HP Pavillion 570-p010.
New one to get a PCIE 6 pin power cable, but there could be other options to convert one of the existing cables.
Is a good power supply enough?
I have Pavilion 570 i3 7100. Can upgrade PSU and VGA ?
How did you open the PCI slot? Mine wont open.
Would you be able to see any results with just upgrading the power supply?
no
I got the Thermaltake Smart 500W 80+ on your link, but don’t have the 4 pin.
Me too
I just found out why, you probably already figured it out but there is a pin that looks like an 8 pin but is two 4 pins together
I have this same model of PC, and the though of removing that much stuff for the replacement is the powe supply is completely mind boggling my goodness. I dont think I can pull it off.
Can you fit an RX580 in there?
Is the dvd drive necessary?
Can someone please tell me why my pc is beeping after I did this? It gets 3 long beeps and 2 short beeps
Can you up grade the cpu on the hp 750p026
How much better will you think the pc can do if I had a i7 7700
Probably 10-20% being that the i5-7400 is a big bottleneck. Looking at getting a 7700 to test
@@TechRoundUp if i were to upgrade the cpu what should i try and get?
Looks like I need to update cpu cooler
It’s possible to mantein motherboard and change pc chase with new power supply?? Thanks
Yes and no. The front panel USB and audio ports are built in. They won't be accessible in an aftermarket case. The case screws don't line up properly irrc so you'll need to zip tie the board in place. Better to keep it in the original case or buy a new/used b150, b250, or b350 board
can i put Corsair Vengeance LPX 32GB (2 x 16GB) DDR4 DRAM 2666MHz
No the motherboard only supports 2400MHz max and 16gb max.
4:51
was the dollars in cad or usd
USD
If I’m not mistaken, couldn’t you run two 16G of RAM for 32 total & then replace the CPU for a i7 ?
The HP-lupin motherboard can only handle 16gb. The cpu can easily do 32 tho. You could OC the ram with setFSB, but every reset the OEM bios will reset those changes.
What is the recommended length for the graphic Card?
170mm or 6.7 inches: It's tight!
What’s the max ram? Is it possible to use a GTX 1050?
Max ram I believe is 32gb and yup can definitely use a 1050
I don't understand I have the same RAM, GPU and CPU, but I get only 60-70 fps on the lowest settings. What should I do?
Are you playing at 1440p or 1080p
@@TechRoundUp 1080p
Hmm that is curious, not exactly sure what the issue could be without more info
@@TechRoundUp what info do you need?
It could come down to in game settings in terms of texture quality and other settings
can i run roblox at with
this graphics card
60fps ?
You should be fine to do that with this card
Lmaooo you can run roblox at 500+ fps with this beast
Any tips for getting computer to recognize the new GPU? I've tried a few things but it doesn't want to show up in device manager
Drivers are installed?
@@TechRoundUp My computer won't detect the graphics card - I've got my monitor plugged in through the hdmi port of the thing - when I got to install the drivers it says it can't complete because I don't have an NVIDIA gpu - im just trying to use a GT 710 2g low profile until the prices of the card you used in the video come down, got it for free. There was already a 2g AMD in there it started blackscreening. Haven't replaced the PSU I have the original in there. Thanks for the response and the video
@@littlejohn6101 are you trying to install drivers using nvidia geforce or device manager? Try using geforce
I have the same pc
Why thermaltake? why not corsair?
Corsair will work just as wel
Wouldnt a 310w PSU work with that gtx?
Most likely, but the psu it came with was 180W
Just looking in detail HP Pavlion 570 such a bad design event the psu .
I like the GPU on top the rest of it is a royal pain in the behind. You should see the BIOS, the worst bios I've ever seen.
What about i3 8100 and gtx 1660 super?
The i3 8100 is faster then the i5 7400 but just wait for 2021 when the crypto mining ends
can i install the components like in the video to hp pavilion 570-p087d ?
HP 570 models are identical so yes.
@@origin3271 some have a 300W PSU like the 570-p020. Meaning no upgrade is needed. The 1660 super will be bottlenecked by the CPU, a 1050ti doesnt require a 6/8pin and will work in the system quite well.
Has anyone used a smaller form factor PSU with these mods where it fit perfectly?
Yes I'm using a Silverstone 300w SFX form factor PSU on mine.
What gpu can you suggest on i5 - 7400 without bottle necking?
Probably somewhere in the range of a 1050 to 1650
Do you prefer 1650 super on that procie?
Could always jump up to a super card, with performance jumping closer to 1660 levels
Can i use super card on that cpu without bottleneck? Just asking newbie builder here ty
It’ll be close but even if you did it shouldn’t be too crazy, and the price makes the super way more inviting
Is a gold power supply enough?
Depends on the wattage
hi, i want upgrade the same pc because its have a amd a109700 i want upgrade to ryzen 3 it it posibble?
why would it not be?i am not an expert or smthng but i think you can if your motherboard supports newer ryzen cpus.I have a ryzen 3 3200g at 3,6 ghz
@@leaguedude5313 oh thanks
@@imamanco3279 np my man
man I wish I did this instead
what's the socket
LGA 1151
Intel i5-7400
How much fps on cs go? low to high
Lol you can play cs go fine even without this videocard it is pointless
Hey bro, I've been searching all over the internet, but is there a led light plug inside of that pc? like a RGB plug on the motherboard because I cant find it
Usually on OEM Motherboards there’s no RGB header :(
do we need the dvd drive?
You can always remove it to gain some space
@@TechRoundUp oh and could I install in something like a normal gpu that isn't a mini version like the low profile gpus/sapphire.
It would be tight, most none mini cards are too long
@@TechRoundUp would a 450 evga psu work for both the gpu (aka the gtx 1660) and fit for the case?
Yeah
I have the HP Pav 570-p059a with a NVIDIA GeForce GTX 750 Ti. If I upgrade to 16g ram will I have to upgrade the power supply?
CAN WE CHAT PRIVATLY?
Is there any other gpu instead of using this GTX 1660 SUPER MINI ITX OC 6G Graphics Card, 170mm Compact Size, 6GB 192-Bit because It's kinda of outta my price range but is there something that could match up with that pc and be a bit lower priced?
nothing really that is cheaper while also being 6GB, you could possibly go with a regular 1660 for $30 less but not really worth the performance drop
@@TechRoundUp question, right now for my Pavilion, the same one as yours, I only have a Radeon R7 200 series, do you think the 500 watt power supply, and the 16gb ram could work with the power supply and the ram stick?
If I understand correctly the 500w psu should be plenty
@@TechRoundUp thanks!
Can you please explain why when i opened my CPU to look at it for the first time in 2 years, i placed it back and it started going really loud and heating up, (that was a year ago) and i know i placed it right on the motherboard and to this day it has not crashed ones or any problems, but on most games it goes really loud and heats up, its really odd, my PC was very quite for the 2 years a year ago
Could be the thermal paste, after you took it off could have caused it to harden, or crack, and not cover the entire cpu. You may want to replace it
@@TechRoundUp i did replace it a year ago and i was having trouble with putting the fan but the fan has been on the CPU really good for a long time, can the new paste be somehow the reason its really odd, if i put my PC on high % CPU usage it goes louder easier for nothing like downloading a small file
Yeah my guess would be thermal paste or contact with the cpu and the cooler, because the CPU shouldn’t get that hot that the fans need to ramp
@@TechRoundUp Ah, so the problem is physical because my PC has had no trouble system wise
Most likely
Does this pc come with the power cord?
Mine did but it will depend on the eBay listing. And if you do swap out the PSU, it will come with a cord as well
@@TechRoundUp ok