HP Pavilion TG01-0023W - All That You Can Improve!
ฝัง
- เผยแพร่เมื่อ 17 ก.ย. 2024
- Here is the next big, small gaming desktop from HP, the TG01-0023W, another great offering by Walmart that is priced at $599 new and $499 refurb, but the refurb is practically new. Following my Pavilion 690 mods from last year, I had to grab those new ones versions of the popular gaming desktops and test it myself, plus of course improve everything I can.
Support me directly with a small coffee!
www.buymeacoff...
Amazon affiliate links:
Y-fan splitters - amzn.to/38vmR0C
Working memory with TG01
Crucial Ballistix Red 3200mhz - amzn.to/3dXfu5w
Crucial Ballistix Black 3200mhz -amzn.to/3e1NnCp
HyperX Fury 16GB 3200MHz - amzn.to/3uAQ3wB
Scythe Big Shuriken 3 -amzn.to/3kBIJfp
Noctua NF-B9 redux PWM- amzn.to/37USO1U
Noctua NF-B9 redux 3 Pin - amzn.to/2PcCRh0
Noctua NF-R8 redux - amzn.to/3sG7J8j
Noctua NF-A8 ULN - amzn.to/3bLqj85
Noctua NF-A8 FLX - amzn.to/3kBJC7J
Fan Rubber Isolators - amzn.to/3sz9Ydt
This is the video I've been searching for! Now I can finally attempt my own CPU cooler upgrade on my TG01. Thank you so much for taking the time to make this video. You're saving people time and thermal paste! I Can't wait to see your future upgrades!
Appreciate the good feedback, more videos are coming!
@@HardwareSense hey what cpu can this use like up to what type of cpu is thos mother board compatible with
@@jkjokeryt2699 Up to 3700X, 65W CPUs only
@@HardwareSense where can i find some of those and how much is it normally i have had this pc and want to upgrade the cpu just dont what cpu
@@jkjokeryt2699 What CPU do you currently have and what is your reasoning for the upgrade?
Just grabbed one of these refurbished for $399! Really good deal considering the cost of GPU's right now. Awesome video, thanks. Subbed!
I could never find them in stock at that price so i went with $505. Not bad compared to 830 on amazon tho.
that's a great deal. what's the model?
Just bought one yesterday at Walmart floor display with no power cable $300.00 out the door bought a power cable for 6 bucks works great!
Currently typing with this Pc.
*Uh..you're typing with the keyboard bro.*
With a 1tb modern nvme ssd and 2x8gb 3200mhz memory, it performs surprisingly well. You need to run ryzen master to OC the ram. But you may as well, the ryzen 3500 can easily go to 4.2ghz.
How can i make my ram 3200?
@@112188Francisco Ryzen Master
Glad I got recommended this video. I’ve been looking for a really detailed video on this PC cause I’m about to buy it this week.
Appreciate the support!
@@HardwareSense can u really change the green led in the tgo1 0023 if so what was the name of the gaming hub i cant fined it
@@THBGYMN No the color can't be changed, only turned off and on and have different blinkings
It's a great pc. Buy it if you can get a good price. And the LED is only green. I just turn it off.
@@HardwareSense how much fan spliters did you git and the link u recommencement did they have a 3pin? also most of the stuff u use are out of stock i hope they re stock soon because this case sucks for air flow my GPU is hitting 85c also what fan controller did you use can you put that link in the description
perfect timing i just bought this lol
Had mine six months... with a 1660ti really good.... only thing that iv found is upgrade ram ASAP... other than that happy gaming ✌🏼💯🇬🇧
yeah planning on buying it as soon as its in stock since these fucking scalpers decided to buy them all
I can’t find one that’s less then 800
@@kennethshilo4597 i bought mine refurbished on ebay
Same
I remember watching this video before I bought the PC, it really helped me to decide and to improve it. Thank you.
Friend needed something for around $500 - took a TG with a 4600g (GPU stripped) for $275 - added a 6600 - 2 8g sticks and an SSD for extra space - you’d be hard pressed to find a prebuilt that compares at $550 - after I optimized thru Ryzen Master (locked bios) this thing is very impressive - if your limit is $600 I highly suggest this route - he will get two good years easy out of it ✌🏻❤️
I just bought one for 325
i wanna say thank you for the vid iam watching this on this pc with these upgrades and it runs amazingly
Happy to help
I upgraded the memory in mine and used the XPG Z1 sticks. Kit number AX4U3200716G16A-DRZ1 32gb(16x2) 3200mhz and it's worked perfectly. 32gb may be overkill for it but the price was right and it works.
I just got my hands on one of these, I think I got the last one available from walmart online. I am new to pc gaming and was wondering did you have to update the bios or was it just plug and play and did it recognize the ram at 3200mhz?
@@mikeyjdm It didn't instantly recognize it as 3200. I had to use Ryzen Master like shown in the video to change the settings.
@@sgtsagara02 thanks brother!
@@sgtsagara02 how do you increase the ram speed on the Intel CPU mine came with Intel i7?
Thanks for the tips, Did a full upgrade myself and the Snowman cooler works great.
Awesome
For those interested in going dual-channel, I got the Crucial CT2K8G4DFRA32A 16gb kit today and put it in my TG01-0429. It properly registered at 3200mhz. However, the "upgrade" to dual-channel resulted in only 3fps increase across the board in only one of my games. Two other games saw no appreciable difference. So, it would appear that my config in the TG01-0429 (Ryzen 5 3600 & GTX 1660 Super) doesn't really care about dual-channel anyway as far as gaming is concerned.
Great Info!
Thanks bro
I’m getting one this week
Legend helped me knowing how to remove the back plate of the heat sink . Thanks man
I've had the newer version TG02 (same case design and brackets, different front cover) for a couple of weeks and the only complaint is the thermals (reaching 90+ degrees while gaming for CPU and GPU). I ended up installing an upgraded CPU cooler, added three 92mm 1600rpm redux fans (1 exhaust, 2 intake). The two intake fans were installed using the black bracket on the side (had to recreate the black bracket on CAD software and then used the negative space to fill the peaks and valleys on both sides of the bracket to create an isolator gasket for the fan to only suck air from the vent holes/mitigate vibration and had to dremel a small portion of the SSD caddy to fit the fans. Now it runs like a dream but will need to rearrange the fans if I want to upgrade the GPU in the future.
What cpu cooler did you use?
Just picked one up today. I'm turning it into my little emulation PC.
Awesome video.
@Aniket Anand 8 gigs of ram(upgradeable to 16), ryzen 5 3500(I've seen someone on youtube put a ryzen 7), and a 1650(also seen someone on youtube slap a bigger card on it). Truth is this little pc has potential. Great entry price and performance right off the bat, and then its upgradeable to boot.
Same thing I did . I upgraded the GPU to a 6600XT & CPU to a 3700X
I’m about to buy one this week
Excellent video! Thank you so much for taking the time to do all of this!
My pleasure!
@@HardwareSense do you know if the small 4 pin connector by the extra sata plugs on the motherboard is a led plug? I’m trying to add some xtra cooling like you did and am wondering if I can use that to control the RGB on fans? Also, from everything I can find there is no way to take control of the case fan so my splitter on the back fan didn’t work either. Is there any other way to control fans through the sata plug or is outside control like the one used really the only option?
@@jeremygalvin2221 I don't think that it is an LED one.
@@HardwareSense I have the one with the 1650 Super, I got it from a local Walmart. Mine has/had Kingston ram and m.2. I already upgrade to 16gb ram and adjusted the speed and overclocked the cpu with Ryzen Master. I like this little pc a lot for my level of gaming. The only thing I REALLY wish it had was an unlocked or advanced bios to control some other things like case fans etc. oh well I guess.
Great little PC, I grabbed it to use as backup and in other room while waiting to come up up with a 3060 or 3070 gpu to do a higher end build. Would love to see how you increased speed on memory, I have corsair vengeance 16 gb 3600 memory kit I stuck in mine and would love to make faster. Thanks for the great input you gave on mods 👍
th-cam.com/video/HfGd1rfgZqY/w-d-xo.html
@@ravendarklawgaming197 Thanks, was able to get my 3600 Ram kit running at speed, that helped a bunch 👍
@@bikedoc4145 Glad I could be of assistance!
@@ravendarklawgaming197 I recently bought the same kit, it seems your comment that helped the other user with their memory got deleted/ isn’t showing so if you could comment how to get the ram to the advertised speed again that would be amazing. Thanks
How did you increase the ram speed mine is stuck at 2400 MHz?
I'm thinking on buying this model. Thank you for the extra details
Great video. I recently bought a TG01-0429 and am interested in cooling upgrades.
Upgraded my RAM to 16GB V-Color Prism Pro RGB kit number - TL8G32816D-E6PRKWK. Works great no issues since upgrading 2 months ago.
I did everything took 2 hours couldn’t install the shuriken over the ram side. however I installed it. The old coolers backpannel was a pain to remove hands are bleeding. I’m getting a lot more fps now over 70 fps more. Planning to upgrade it to 3060 some day
I recently purchased one off the used market with a 5600G 16gb ram and a 512Gb NVMe drive! Exited to watch and try this.
Just got this today with the 1660 and an i5. Should be a nice change from a $300 laptop 😎
Very
from where
@@arsew9742 HP.com. kinda pricey but I upgraded a few things and alot of decent prebuilts are sold out. NZXT has been dry for weeks. And I really wanted at least a 1660 to hold me over till I can build a good system
@@LetsSeeYourKungFu yeah nzxt has been very dry have you heard they increased the price of their starter pc to $1000?
@@zanderstepp3689 i didnt know that. but i can beleive it.
It's a great little PC I'm very happy with mine only issue I've had so far is I'm currently having to replace the power supply. Let me tell you it was fun figuring out the internet smoke signals to get HP to sell me one.
I can only imagine
Hoping to get this for Christmas 2021.
got it not to long ago, great starter computer. I would recommend getting it, it can play games like minecraft and valorant easily. I havent tried demanding games like warzone. It runs fortnite at around 90 fps with medium/high settings. Great pc, plus you can upgrade it later.
@@paytonhouse1899 I’m only 11 years old, I don’t play to many FPS games. I play mostly minecraft, roblox, and I want to play games like subnautica or astroneer.
Wow so many people are buying this right now too. It's literally like the only name brand prebuilt thats decent and is a goodish deal in this market. I think I'll be happy with this.
It's great, I love it
Thanks bro this helped and now I have 32 ram 3200 MHz 👊🏻👍🏻
Happy to help
I have the i5 10400f and looks like I'm stuck with the 2666. My i5 only supports up to that frequency, lucky I checked on the Intel website first.
@@rem792 That's not bad, with Intel the ram speed is not that big of a deal
@@HardwareSense Oh, thanks! I was really disappointed to find out after I saw a video comparing the FPS in games with one memory dimm and then in dual channel and the difference was huge, up to 10-15 frames in some games. It must have been a Ryzen then. I can't remember. Thanks for the response!
You’ve got no idea how helpful this was for me
That's why I make them, I happy to help
If you’re wondering what ram works I can confirm that the “TEAMGROUP T-Force Vulcan Z DDR4 16GB Kit” was an easy upgrade responded well with Ryzen master easily overclocked to 3200MHz. Working nicely with my “Asus dual 2070 mini” upgrade. *not sure if it’ll clear the CPU cooler he installed but ram is pretty low pro
It will, that GPU can fit anywhere
I am a little nervous about over clock my ram I have same computer and just got Corsair 3200 16 gig ram and eat to run it at that .. how do I do this with out bricking my computer ? I clicked auto clock and that did not work just overclocked my cpu
@@wesleychef You are not going to brick anything, just see with CPUZ what are the default timings of your memory and match them with Ryzen Master. And if it doesn't boot, zero the Bios and do one level up on the CLs, for example if your memory is CL 16/18/18/39, you could do 18/19/19/41
@@HardwareSense how do you zero bios ?
@@HardwareSense also would one level up be 17,19,19 40 or does it not work like that ? Not question you just don’t quite understand why you go 2 level up for first and last number ? Thanks
Ryzen 5 5600g and I upgraded the ram, planning for better cpu, dedicated gpu, and better ssd and hdd.
Thank you. It is useful~
I got a TG01 1109. It's currently selling for $1300 in Canada.
The specs:
CPU: I5-10400F 2.9GHZ boost to 4.3GHZ
GPU: GTX 1650 Super 4gb GDDR6
RAM: 12GB RAM 2666MHZ
I'm getting one with a ryzen 5 5600g 8gb of ram and a rx5500
I've just bought a TG01-2460. Ryzen 5700G, RTX 2060 super, 16GB ram. So far it's running great with no issues, but I'm wondering if there are any weak areas in the design or any easy upgrades that should be addressed right away.
All the design choices are terrible, follow the video for any future upgrades
Those cases don't breathe... at all. Watch your temps while gaming. Follow HardwareSense's guide on adding/ changing case fans, or CPU cooler. Same lesson here is applicable in your case.
Got same one couple weeks ago, looking to get a better CPU cooler in it myself
Very helpful video. Removing the factory CPU backplate was very difficult. I couldn't find my spudger, so I used 2 old credit cards to get it off. I think my total time start-to-finish was 2.5 hours.
great video! Long but interesting all the way through. Just got myself the version with RTX3060ti and Ryzen 5 5600G and looking to improve the cooling soon. It also comes with a 500W PSU. Would I still need the fan controller? So far it runs quite well but can get a little loud when it ramps up and also looking to improve the cooling overall. Liked & subscribed again great video.
You going to really love my next video then
@@HardwareSense that sounds great, deserves a press on the notification button aswell :) , btw been looking at using a Noctua NH-U9S tower fan you think that would work it says it is 125mm tall and what i read there should be 135mm space between the motherboard and case is this coreect and would that fan be a good alternative?
@@kombat00 Yes that one can fit
I have the very same pc from Walmart BUT mine came with a ryzen 5 3600. I guess I won the pc lottery.
Many of us did
So I need to get cooler for intel instead of AMD?
Correct, Intel brackets.
@@HardwareSense thnx think I'm going to add the big fans in front and just make air hole in front case maybe add some vent covers over holes
Amazing computer just got mine yesterday
Getting mine Friday, exactly the same except model except its 8gb ram and 256 SSD.
What would a good cooling fan upgrade be for the TG01-1022 model?
hockey fan, loving the thrashers cap
Just got this one the 500 SSD and I feel like I bought the last one cuz when I try and look it up on their site it’s sold out
I drove an hour to get mine. Best computer deal in the world right now. To build one right now with the same specs would be probably a little over 1k right now
Sweet hat. RIP Thrashers
Great vid! Have you tried taking the parts inside the TG01-0023W and changing the case? I am thinking of moving it to a different case. Eventually, I want to upgrade the power supply, maybe the motherboard and potentially the GPU.
Yes that's quite easy, you need a case new motherboard and a PSU. The rest can be reused.
@@HardwareSense if switching my mb will I have to Reinstall windows 10
@@convolx2495 Yes
Is it installed in the ssd? Or do I have to install it back with a free copy of windows
@@convolx2495Before you switch the motherboard, extract the Windows key and reuse it with the new motherboard
corsair vengeance 1st try worked great dual chanel 16g
I’m glad you made a video on this Walmart pc. I know nothing of upgrades and computers, but always wanted to give upgrading a shot. This pc is great already, but it has its limitations in the detail of the game I like to play. I’m glad this is here or help guide on what to add to make my gaming experience a better time. May modivste me to get a monitor of 240 or a possible higher hertz.
Thanks helped me verify the legitimacy of a 1650 super I was looking to buy!
No problem, happy to help
Thank you very much for your video. I've replaced stock cooler with be quiet! Shadow Rock LP. The backplate was a little bit different but i just put some isolation tape under it and the whole PC works fine. It's much more quiet and cooler now. I've also added an additional fan to the case and had some BIOS error during first run after installation, but it reinstalled itself and works well since then :D
Excellent
@@HardwareSense Do I have to replace the backplate when I want to install the Big Shuriken 3? Is it not possible to install it on the existing backplate?
@@ThePuzzler23 Yes you need to replace it with the one coming with the Big Shuriken 3
Thanks for the fast response and the awesome video!
Do you think there is a way to replace the current fan with a new one without removing the backplate?
I just saw another video where someone was replacing the fan with a "Noctua NF-A9" which is probably a little too weak for my Ryzen 3700X.
But as you can see on the video at minute 7:40 he is not replacing the backplate but is using some "Intel set spacers" to make it fit.
th-cam.com/video/KIm0SHtfErw/w-d-xo.html
Do you think something like that would also work with the "Big Shuriken 3"?
I have never disassembled a computer into its individual parts and would prefer not to remove the whole motherboard even though it looked very easy watching you doing it! :)
Best regards!
@@ThePuzzler23 It's not hard, just follow my video, it will be better to remove the stock backplate and install the one that comes with the aftermarket one.
Awesome video!!
I have 310watt and upgraded from mz gtx 1650super to Rx 6600
The one I just bought came with a Ryzen 5 5600x , upgraded ram and ssd and have a great mid tier pc, next upgrade will be swapping the Radeon r5 5500 to an RTX 2060 and maybe the cooling
Even stress testing now, stayed under 70°C while hitting 140+ frames on most games
@@xxragingxcajunxx1924 LITERALLY same here, lmk how your upgrade goes
I have the Hp 290 G2 business PC and it looks exactly like this one
I mean the case is essentially like most other hp cases just with a different front plate
Thanks for this video brother. Extremely helpful in both vids actually, I subbed 👍
Definition of OG.
I just bought one of these a couple days ago and noticed it runs a little hotter than I would like. One thing I noticed is I've never seen the power supply fan run. Is this typical with this pc? This is the only computer I've owned that I've seen this with. I tried getting an answer from the HP support people and they claimed it was out of warranty, and wanted me to send a copy of my receipt. I did then the tech guy disconnected.
Heya. I just noticed the same thing on mine. Were you able to find any more info on this?
@@thepopatlaal i ended up installing a fan on the intake to blow air in, and an expansion slot fan on the back to blow air in, I also set up a fan controller to run the power supply fan all the time blowing air out. That keeps the case cold. I also upgraded the cpu cooler. I can remember which one but it does help. As far as I can tell the power supply fan is only supposed to come on when it gets too hot, but with such a weird power supply, I'd try to keep it as cool as possible.
The PSU fan never spins on mine either. The temperatures are fine though
Can we do anything with the spare PCIE x4 port located right above the gpu/next to the M.2 slot? Looking to maybe add a second M.2 slot with an adapter, but I don’t know if it will work or if it will choke the WiFi in the other slot *EDIT* It works! this is another possible upgrade as long as the GPU isn't too tall. I tested this port with an M.2 256GB SSD, and a 4x USB 3.0 port unit and both worked fine. attaching an m.2 NVMe to a smaller port limits it's speeds, but it still is much faster than an older SATA SSD and works great as a backup drive if you choose to upgrade the computer's stock storage
What memory did you find to workin the system? Mine came with 1-8 GB 3200 MHz RAM stick, I bought Corsair 16 GB (2- 8 GB 3200 MHz sticks). The system reads the Corsair sticks at 2133 MHz. It reads the original stick at 3200 MHz. What do I need that will work in this system? What can I do to get the Corsair to read as the advertised 3200 MHz speed?
I’m actually planning to buy one of these
Yo Chicco,
Your the man papa 🙏🤟🏼
I just bought another matching stick of ram that was installed in pc when I got it do you think it would still be a good performance boost I only paid $30 for it
Hello,
In this tutorial, you mention changing the Wireless Adapter!
Which Wireless Adapter did you upgrade to ?
Intel AX201
Thank you for video. Can you please tell me is the ssd generation 4 like gigabyte aourus nvme M.2 good and suitable for this motherboard Erica? I have expansion slots for M.2 ssd. My Pc is with r7 3700x and 1660ti with 16 gb ram. Is there slot a diferense from m.2 ssd gen3 to gen4? thanks
The only difference is the speed, but in my opinion the speed between 3000mbs and 4000mbs, in normal use, you can't tell the difference.
Great tutorial Ivan. Doing this myself now because noise is pretty bad. Can the system be overclocked once you buy the huge heatsink and 3200 memory?
I wouldn't recommend overclocking with the stock motherboard
I found a RTX Evga 3060 card and yes you are right based off the specs. Its just like the Zotac 2060 Super 8 GB specs it will handed it just fine in those HP PCs.
Awesome
Just curious... My recent purchased HP TG01-0023w came with a SK hynix 256 GB NVMe model BC511, rated slightly below their higher performing model PC601 model. What Samsung model number came with yours? I'm interested if may be the slightly better rated Samsung model PM961 versus SK hynix model BC511 or the definitely higher end rated Samsung model PM981. Thanks
One of my TG01's came with Samsung and one with the SK Hynix
Thrashers heck yeah!!!!!!!
Just got a Noctua NF-A8 and a NF-A9 installed. 8mm for intake and 9mm changed with the original exhaust fan (Not sure if it is better). Both with splitter, and it worked with me.
Still waiting for new brackets to fit my Noctua NH-L9x65 SE-AM4 to the motherboard. But now I regret not buying the shuriken -.-
Hey sorry to bother you. Did the Noctua cooler not come with the correct mounting brackets? I was thinking of getting this cooler too. Also, was worried it wouldnt have enough space for the 2 ram cards.
@@joeboxer12345 Hey!
No, I had to order the right bracket.. Weird thing HP did was have a amd socket with a intel bracket.. I now have 1 exhaust and 2 intake fans, and still plenty of space!
@@havhathag Awesome, thanks! No idea how you fit in a second intake fan. I just have 1 intake and 1 exhaust and will be getting a new cpu cooler soon. I think I'll get a different cooler that has brackets for both then
@@joeboxer12345 No problem😊
I had a 80mm and a 60mm fan for the intake. Now I just have the stock fan for exhaust and a noctua 92mm for intake. I found it better than a 80 and 60:) Temperatures are okey.. Could be better😅
@@havhathag where did you connect the y splitter on the motherboard?
i feel good about getting one.
prior i had a gtx 1650 and a hp prodesk i5 3760 or something.
got a 8 gig ram stick heading my way to get the 16 gb of ram.
Went to WalMart to buy water and I lucked up on one after just looking at it on the website for $900. I never felt so good spending that $599.
How is it running so far? I’m planning on buying one as well.
Bro I couldn’t find one but there was a sale on their website it was a slightly different version the only thing that was different was the cpu and the ram. It had a Ryzen 5 4600g and a 2x4 8gb 3200mhz Ram and it was only going for 600$ the original price was 700$ but it was 100$ off so I ordered that and next day my Walmart had the 3500 one but a lot of people told me the one I bought it a bit better since my cpu is a bit faster
@@bmooo04 Sorry for the late reply. The HP runs really well but I've since built my own custom computer. The 1650 Super in the HP does a very good job running WarZone but it gets so HOT!!! I play on my new build and the 3070 Ultra FTW3 barely breaks a sweat at 1080p giving average 120 fps. The HP is a good budget PC but you will itch for an upgrade.
What is the max memory for this? I just picked one up. Also - what size is the rear fan? I am looking to get an RGB one.
32gb and 80mm
The prospect of peeling the backplate like that scares the absolute crap out of me...
I bought some ram that is too tall rip. Ill buy some small enough and attempt to do these upgrades as well. Got a 1660S coming in tomorrow im hyped! Do you have a link for the black things used as screw replacements on the fan? Glad to see there was no need for a dremel this time.
I just added the link to the rubber isolators in the description. BTW, thank you for the support with buy me coffee, really appreciated!
Thank you for the tutorial 👍
Found a display clearance in a local Walmart for $154! Check your local Walmarts.
Does anyone know if a 80mm fan will fit with a HDD? Looking at the video looks like it would be a tight fit.
Should I buy just 1 more stick or directly also replace the one it comes with and buy 2×8 gb sticks?
Cheaper route is getting the same 3200mhz JEDEC stick, or more expensive, to get another kit. Personally, I wouldn't spend too much money.
@@HardwareSense will the same ballistix that you have in desk work on the tg01 1070m model?
My brother has this PC. he got it from microcenter
Great video! Wish, however, you would show a video of the computer actually running.
I have other videos showing that
Just got this at Walmart for only $279
Great deal!
So I installed this, did step by step exactly what you did. Minus the extra intake fan.. and when I power it on it beeps 3 times and there’s nothing that shows on the screen. The fans and everything work but nothing load up on the screen.. so I took everything back apart and now it won’t even power on!!
Reset the Bios and try again
@@HardwareSense thank you for getting back to me I found out what was the problem. So after taking the pc apart and putting it back together 4 times I realized. So when I put the thermal paste (Arctic MX-4) the first time It didn’t sit well on the Ryzen 5. So what ended up happening is it beeped 3 times and never powered onto the screen. So I take everything back apart in reverse, come to find out the CPU got stuck to the big shiruken so it lifted the CPU off of its set module. All I did was unlock and re-lock the CPU and boom turned on like a champ. It was the thermal paste that was so stuck to the cpu that when lifting it up it moved the whole cpu and module which abstructed the signals. I know it’s a long paragraph but hopefully if anyone had the same problem they can use these steps! Thank you so much these videos are so helpful.
Hey can you get a m.2 nvme drive to run PCI 3.0 with 4 lanes? I can only get 2 working
Very usefull and well made video, I subscribed... Is there a cooler out there that's still good but doesn't need to change the backplate, for someone who is lazy and conservative like me?
Thanks for answering, cheers.
There are some Noctua models and the Vetroo L5 that is on a budget side but very good too. Thanks for the support!
9:17 What about a universal 12mm fan mount bracket? Thanks for the vid!
Unfortunately I have not found a way to mount a 120mm fan yet, but I haven't gaven up yet
What should, i bought 120mm noctua fan. I got it to fit by drilling a hole to The Black mount thing. Only problem IS that The fan IS super loud and i dont know how to Make it quieter
Get the one I am recommending
HP Pavilion Gaming - TG01-0023w running windows 11 no issues!
Haven't tested it yet, but I assume there will be no issue
Please help me, what’s the 4 pin header to the left of the blue and white sata power headers? It’s the only 4pin header i can see other than the 2 existing used fan headers.. I’d like to know what i can do with that header; power led strips ???
Is this guide transferable to the TG01-1160 version of this PC? Differences being the 3060 and the i5 10400f? Since the graphics card is larger could I still use a 92mm intake fan or would I have to use a smaller one? I find the graphics card temp hovering around 77-85 Celsius, would these upgrades drastically improve temp? Also a little confused on the intake fan setup do I need the fan control?
Yes you can, I don't think the card is taller, just longer maybe.
very thorough, did the wifi upgrade make a significant difference?
same question. Has anybody seen a difference in using the Intel one?
Just got this pc (or something very similar to it, still part of the tg01 line), and was thinking about switching out the case on top of some of these upgrades. Do you think it would be worth it? Also what size is the motherboard? Thank you for this video!
@ i got it straight off the hp website, not sure if they're still in stock tho
@@harshanas1729 the motherboard is a baker, proprietary from hp, meaning it has specific measurements only for the pavillion case, I've found a case switch video but it wasn't worth it since you lose the ability to use all of your ports on the motherboard.
@@razawavs Thanks for telling me this, I never ended up swapping the case and now I know not to.
Would it be possible to put a bigger cpu cooler in it. It wouldn't be as wide but it would be much taller. I'm planning on getting this and not using the ssd bracket to free up some space. The cooler I'm looking at is a Arctic Freezer Xtreme
Can you help with the type of Sata power splitter cable being used for your final intake fan set up, you are using to power up the Zalman Fan Mate? A possible link for the Sata power splitter cable used would be awesome!
It's in the video description
@@HardwareSense sorry but I couldn't find the link in the description. Can you please write it here? Thanks in advance.
@@BaristaMand Updated now, check it out.
@@HardwareSense I was able to find the affiliate link to the fan SATA adapter you're using on your earlier video " HP Pavilion Gaming Desktop - Intake Fan Mod That You Need!" Thanks a lot
Great review with description as usually. I ordered the set with i5 and RTS 3060 12Gb. Original set has 2x8GB 2666Hz ram and I was wondering if in case of i5 changing to 3200 will improve anyting or I should stick with original memory ? Any tips ? Asking now because Im planing to put Scythe Big Shuriken 3 and obviously RAM needs to be changed before if needed.
No in the Intel version there are not a lot of benefits with the higher clock memory. The cooling solution is definitely recommended.
@@HardwareSense thanks a lot for a really quick feedback! I actually realized that thanks to your videos Ivan I have bought my 2nd pavilion gaming PC, previously had the one with gtx1660 :)
@@DamianNocun No problem at all
hey i put a 120mm fan in mine i use tin snips and moded the black bracket
Will the same ballistix ram work on the tg01 1070m model?
I just bought this but my version have a ryzen 7 5700, rtx 3060 16gb ram, 512 , window 11pro for 1,149 hope I did good it’s going to be my first gaming pc
You will need to upgrade the cooling for sure
can you put a list of all graphics cards compatible with a erica motherboard as my tp01 has one and i want to upgrade it.
Anything up to 3060 including, as long as the size is allowing
Hello, appreciate all the knowledge you gave. I have the TG01-1022, would you still recommend the shuriken and the other fan? Also curious is I should upgrade my 5TG external hard drive to an SDD (I only install games on the HDD)
The Big Shuriken 3 is one of the best for this computer, I love it. As for game installation, I would never use HDD, it is just too slow, even the cheapest SSD would be so much faster. HDD is only for data storage at this point.
@@HardwareSense thanks so much, watching you take out the motherboard eases my mind lol.
Hi! Could you please tell me the name of the cooler used in this Vid? Thanks!
Scythe Big Shuriken 3 and Snowman
Hi, great tips on upgrades thank you.
Can you add the link for where you found the refurbished TG01-0023 w