very epic, thank you for your bravery. I was in great need of this because the layer of Gamer Grease on my Gamer Mousepad (no anime boobie cushions yet) really dulled the brilliance of its RGB light performance.
The main thing I would suggest is to use fragrance-free hand soap. My steps: 1) unplug USB cable, 2) use soap and water to clean in bath tub. Try not to get light module wet. It doesn't matter if the light strip itself gets wet because it's just an optic fiber, which doesn't have electrical current passing through. 3) lie the mousepad on towel and use a blow dryer until thoroughly dry. Also, press down anywhere on both sides to check for remaining damp spots. Whole process shouldn't take more than 20 mins.
'It doesn't matter if the light strip itself gets wet because it's just an optic fiber, which doesn't have electrical current passing through.' this is the info i needed!
I got inspired cleaning my coolermaster keyboard/mousepad with this video. in addition to your cleaning method, i tried to take out the led assembly that had 4 philipscrews at the back and to my surprise once i had that removed, you are left with a regular pad that can be cleaned with the traditional method. No led lights whatsoever. Thanks!
Just finaly got to your video after searching for weeks, get that like it's more than deserved. I'll also share the video to all my friends with rgb mouse pads
Thank you for this man. So many tutorials are too long and bogged down with useless info, it's good to see an efficient tutorial. I'll def be subscribing.
i was about to commit unlive because i couldn't figure out how to clean my pad but then i watched your video and it gave me faith in humanity again. thank you... earned sub!
A word of advice, cover your expose outlets that connects to the usb cord with duct tape, this ensures that no water can enter the technology and the lights
I spilled a whole can of Coke over my mousepad and I cried and didn't use my computer for a month. I had to do this a few times but it did work I used the other side of the sponge and it didn't hurt anything
I think it's ok to clean it as long as you unplug it obviously and let it dry completely because it won't destroy the lights as long as there's no electricity flowing when cleaning it with like some soap or liquid
An easier and better method is to use the sprayer in your kitchen sink. Just hold the area with the controls up out of the water, and cover with your hand. Spray it down with warm water, squirt a little dish soap around, and spray it down thoroughly. Pat it dry with paper towels and allow to fully air dry. With this method you are getting it fully clean. Don't worry, there are no electronics in the tube surrounding the pad. Cheers!
A quicker way for surface level stains and such is to dampen a wash cloth with rubbing alcohol and scrub the mouse pad a few times avoiding the rgb controller
What a delightful tutorial. Mine looks better than brand new. Also, your soft voice made the tutorial even more enjoyable to watch. Definitely getting a sub from me.
I don't deep clean my mousepad, but I literally just use wet wipes, and it's fine xD. Using the razer goliathus chroma mousepad. Wet wipes seem to be enough.
Your best bet is to submerge it in distilled water and isopropyl alchohol mixture, soap and mineral water can corrode the traces and sabotage any diodes/capacitors
Decided to wash it since I bought it when it first came out and I have been pretty liberal with the water and it has yet to die if any of you are worried. Just found this video to see if there was a more effective way since mine was pretty gross even with regular cleaning.
I just recently got a razer mouse pad and its grey so you can see EVERYTHING ive ever spilt on it. I'm going to try this tommorw to see if it will work. Thanks so much!
@@1337ington I clean mine weekly with soap and water. It totally works and gets all the stains out. I used a blow dryer to dry it off, and it looked brand new. Good luck with yours !!
I just take it in the tub, make sure the module is above water level then scrub with a washcloth and rinse with the shower head, so far so good! What id like to do eventually is see if there’s a way I can mod the module to make it removable to some degree, just need to find the time and patience to figure it out
Hm... I'd be sceptical of putting much sope into there without the possibility of rinsing it out properly. Sope is pretty damn dirty in itself (it only makes things clean once you've thorougly removed it also with water...) and bad smelling bacteria can definitively get worse if soap residue is in there (depends on the soap type and humidity levels etc.) But I guess this method can still work well enough if you're successfull at removing the soap well with the towel. But still, I think I'll just try to clean the entire thing from the RGB-module down, like a normal large mousepad, keeping the module dry. And then washing with a damp cloth around the module. It's not like it's ever going to be full of skin-cells or much dirt up there in that corner anyhow. But even if I would do it differently, the video was well made and to the point, as a tutorial should be. Well done 👍
![[MV] A leap of faith...ความเชื่อใจครั้งสุดท้าย (From "Petrichor the series")](http://i.ytimg.com/vi/U1piZH2CNXA/mqdefault.jpg)
Simple and fast, as a tutorial should be
@@kluup1081 lol
@@kluup1081 She do be one of the top anime bhadies doe 😩🥰
I went to like the comment, saw 420 likes.
I can't ruin that.
Yep
Bruh the other ones be like grab this grab this grab that dump that dry that
This man really saved a quite a lot of us rgb mouse pad gamers out there lmfao
Ikr I asked my friend he just says *imagine having a rgb mouse pad you fucking shitter*
@@Official_Yuto sounds toxic but idk your friendship dynamic
@@Official_Yuto Imagine not knowing you can buy a RGB mouse pad for literally under 20 bucks.
yeah corsair mm polaris thing something here
@@Bayckun no
very epic, thank you for your bravery. I was in great need of this because the layer of Gamer Grease on my Gamer Mousepad (no anime boobie cushions yet) really dulled the brilliance of its RGB light performance.
Ew
@@Blizzity-lz9pxOh Yeah, It's All Coming Together
Tf
this statement sounds like what Moistcritikal would say
@@badelNT6 true
The main thing I would suggest is to use fragrance-free hand soap. My steps: 1) unplug USB cable, 2) use soap and water to clean in bath tub. Try not to get light module wet. It doesn't matter if the light strip itself gets wet because it's just an optic fiber, which doesn't have electrical current passing through. 3) lie the mousepad on towel and use a blow dryer until thoroughly dry. Also, press down anywhere on both sides to check for remaining damp spots.
Whole process shouldn't take more than 20 mins.
'It doesn't matter if the light strip itself gets wet because it's just an optic fiber, which doesn't have electrical current passing through.'
this is the info i needed!
What if I can't unplug it?
@@liralable3826 rip it out the wall
@@Karadaun god tier advice
using a blow dryer can damage the mousepad so I'd probably just leave it out to dry
thank you so much! (Razer Goliathus Chroma Extended)
heartless how many times did you clean yours
Yikes you spent 50 on a mouse pad.
Flandin✔️ Yes, I just bought another 50 dollar mouse pad!
Tricky Godz do you get the stains on it aswell? i think it's sweat or something
heartless Nah, sweat wouldn’t stain anyways. I think it was gfuel, or some other drink. Mines black and it’s not an rgb.
I got inspired cleaning my coolermaster keyboard/mousepad with this video. in addition to your cleaning method, i tried to take out the led assembly that had 4 philipscrews at the back and to my surprise once i had that removed, you are left with a regular pad that can be cleaned with the traditional method. No led lights whatsoever. Thanks!
Just finaly got to your video after searching for weeks, get that like it's more than deserved. I'll also share the video to all my friends with rgb mouse pads
Thank you for this man. So many tutorials are too long and bogged down with useless info, it's good to see an efficient tutorial. I'll def be subscribing.
How long does it take to dry
I got a RGB mouse pad as a gift 10/10 can confirm it was dirty after a few months of use and i had no idea how to clean it This man saved me
been living with a dirty qck prism xl mousepad for over 6 months without any avail to cleaning it, so thanks for this :)
I just cleaned my rgb mousepad and it worked great! Rgb still fully functional
I spilt milk on my RGB mouse pad about a month ago, cleaned it with this method today and it looks brand new!
No one:
My legs without lotion: 0:11
ew
@@hopsfy Oh Yeah, It's All Coming Together
same
Same
i was about to commit unlive because i couldn't figure out how to clean my pad but then i watched your video and it gave me faith in humanity again. thank you... earned sub!
Here in 2022, this is still helpful. Thanks, Dude!
So helpful! Thanks, i was worried i was going to struggle
A word of advice, cover your expose outlets that connects to the usb cord with duct tape, this ensures that no water can enter the technology and the lights
The best tutorial cleaning rgb mousepad i've ever found🔥 Thanks bro..
Done it with my Razer Goliathus Chroma Extended. Thanks!
this is an amazing tutorial, thank you for not overcomplicating it 🙏🙏
I spilled a whole can of Coke over my mousepad and I cried and didn't use my computer for a month. I had to do this a few times but it did work I used the other side of the sponge and it didn't hurt anything
I feel you pain I just did this too
I also did this :/
i just spilled coke on mine aswell and the stain shows more bc i have a grey mousepad :(
Just dont eat or drink when gaming, its unhealthy and dangerous, just get up, and take a break. Its not that hard
I did the same but I cleaned it up quick enough so the coke didn’t sink in to much
Thanks for this! I had solved the problem that every gray extended mousepad have!!
This is the type of content that should be more popular
Thanks, I love all of my Roccat peripherals
Thanks a lot!! Also I really appreciate how this video just gets to the point and explains everything quickly.
TRUE LEGEND. Helped so much! My mousepad looks so nice and the RGB still works. Great job 👍 you earned a sub :D
Thank you. You helped me clean my RGB mouse pad and it looks brand new
step 1 unplug mousepad
step 2, clean it while its plugged in lol
He did say that he forgot
Works amazing just did it for my mousepad it was quick and easy
Thank youuuu! Recently got an rgb mousepad and didn't know what to do. Thanks!
The quality of this video is amazing, consider me your 350th subscriber!
This is what you call a helpfull tutorial
I think it's ok to clean it as long as you unplug it obviously and let it dry completely because it won't destroy the lights as long as there's no electricity flowing when cleaning it with like some soap or liquid
....... just no
Thank you so much my mousepad looks brand new now thanks to you 💙
Thanks, straight to the point and helped me clean my RGB mousepad right away after the vid.
An easier and better method is to use the sprayer in your kitchen sink. Just hold the area with the controls up out of the water, and cover with your hand. Spray it down with warm water, squirt a little dish soap around, and spray it down thoroughly. Pat it dry with paper towels and allow to fully air dry. With this method you are getting it fully clean. Don't worry, there are no electronics in the tube surrounding the pad. Cheers!
worked like a charm
havent cleaned my mouse pad since i got it... 1 year :) thank you
thanks, my mousepad looks brand new using this tutorial
A quicker way for surface level stains and such is to dampen a wash cloth with rubbing alcohol and scrub the mouse pad a few times avoiding the rgb controller
Thanks!I wanted to better my setup.And thanks to you,it got better!
Thanks man! This is helpful since my mouse pad is dirty
my qck prism cloth is thanking you for your bravery.
thanks this is a big help for me keep up the good work 👍❤
Thank you so much you just made life so much easier
I brushed mine with quite a rough brush and frayed it a little bit but it should be ok thanks for the help
Worked perfectly! Thanks alot
Ty man Im definitely gonna sub to ur channel for that, now you made my setup look a LOT cleaner
Thank you! I couldn’t find a good guide for RGB
Mine says it's "waterproof" but I won't be testing that obviously..Your method seems perfect thank you
This tutorial was very helpful man thank you so much, I also have the same mouse pad and the same keyboard haha although mine is the tkl version
you gained a sub cause of the amount of grease my mouse pad had thank you
What a delightful tutorial. Mine looks better than brand new. Also, your soft voice made the tutorial even more enjoyable to watch. Definitely getting a sub from me.
That sounds pretty fucking gay
Thank you!! It really worked perfectly!
omg thx so much i have the pewdiepie desk and its stained so I really needed this
Your a life saver. Thank you
axactly what i needed. thanks
im about to throw away my rgb mousepad and buy a new one, and suddenly ur video pop up from youtube recomendation. thanks for the guide man.
Glad I could help!
You are a legend, Keep on Brother
omg ty, my cats got muddy paw prints all over mine today and i wasn’t sure how to clean it
thanks man appreciate it❤️✊🏼
i thought the scratch were from me ripping the mousepad. thanks a lot
Life 👏🏻 Saver 👏🏻 !
thanks bro nice video keep it up
omg thank u! my mousepad looks so clean now:)
thanks you helped me alot ❤❤❤
Thanks for the vid. Helped a ton
BRO U ARE MY HERO
THANK YOU SO MUCH someone spilled soda all over my mouse pad it was so sticky thank you so much
THANK YOU SO MUCH I HAVE BEEN TRYING TO GET PENCIL SMUDGES FROM MINE
Thanks bro this was a good video mine is trying as we speam
really worked, thank you so much
Damn, this actually worked, thanks.
damn about to do it to my razer goliathus extended hope it dont mess it up
i have the same mosue pad as urs, is it good, did it work?
hey did u damage ur mousepad? I have same one and im kinda scared
@@eurocrem7030 it did, I tried just follow everything on the video and ur good to go!
tell me how it goes, i got the same one
@@realpunkfruit literally the same thing in the video and dry the mousepad
Instructions unclear .
My sponge is now *RGB*
Awesome thanks 😊
I don't deep clean my mousepad, but I literally just use wet wipes, and it's fine xD. Using the razer goliathus chroma mousepad. Wet wipes seem to be enough.
thank you bro for the smple video
Your best bet is to submerge it in distilled water and isopropyl alchohol mixture, soap and mineral water can corrode the traces and sabotage any diodes/capacitors
Decided to wash it since I bought it when it first came out and I have been pretty liberal with the water and it has yet to die if any of you are worried. Just found this video to see if there was a more effective way since mine was pretty gross even with regular cleaning.
Thank you i dropped food onto it and I didn't want my mouse senser getting greasy
THX for being fast.
Thank you...it worked out for me too.
TY due, my Razer Firefly is getting a tad sticky. I figured this would be the solution but TY Kindly for confirmation 👌
actually works thanks man
I just recently got a razer mouse pad and its grey so you can see EVERYTHING ive ever spilt on it. I'm going to try this tommorw to see if it will work. Thanks so much!
Vellcie this is also me...got the quartz goliathus and this shit is dirtyyyy
Same for me, u guys cleaned it like this?
I have the same one. Gonna try this today and will report with results.
@@1337ington I clean mine weekly with soap and water. It totally works and gets all the stains out. I used a blow dryer to dry it off, and it looked brand new. Good luck with yours !!
@@eviejynx4550 Yeah I have the same one its so easy to stain ;-;
Bro I almost threw away mine thanks you save me money keep it up 😉
Thank You! 😄😄
TYSM THIS HELPED SOOOO MUCH!
Nice thank you. I have steelseries CS:GO QCK Prism and it has loads of colours and patterns on it and I didnt want to damage it. Thank yoh
I just take it in the tub, make sure the module is above water level then scrub with a washcloth and rinse with the shower head, so far so good! What id like to do eventually is see if there’s a way I can mod the module to make it removable to some degree, just need to find the time and patience to figure it out
Worked for me! Awesome
Thank you bro!
thanks i my cheap off brand mouse pad is now very happy and clean
Brilliant. I just spilled coffee on mine, it needs a wash lol
don’t forget to wipe under the pad for water that seeped thru
Hm... I'd be sceptical of putting much sope into there without the possibility of rinsing it out properly. Sope is pretty damn dirty in itself (it only makes things clean once you've thorougly removed it also with water...) and bad smelling bacteria can definitively get worse if soap residue is in there (depends on the soap type and humidity levels etc.) But I guess this method can still work well enough if you're successfull at removing the soap well with the towel. But still, I think I'll just try to clean the entire thing from the RGB-module down, like a normal large mousepad, keeping the module dry. And then washing with a damp cloth around the module. It's not like it's ever going to be full of skin-cells or much dirt up there in that corner anyhow. But even if I would do it differently, the video was well made and to the point, as a tutorial should be. Well done 👍
Dude thank you so much
And since I play controller and kbm I can play controller while I wait for it to dry. Perfect
Thanks Man! I can definitely get some FPS now.😁