Vent Window Wind Noise - 1st gen cummins
ฝัง
- เผยแพร่เมื่อ 28 ม.ค. 2017
- Today we show you how to fix a common problem with our 1st gens. A noisy vent window due to a poor seal caused by the vent window latch. The vent window latch tends to bend backwards and cause this leak. Today we show you how to easily fix this instead of that quarter you were using to temporarily rid of this problem! Hope this helps and stay tuned for more videos.
Tyler, - ยานยนต์และพาหนะ
Because of your video, I fixed the wing windows in my gen 1 cummins and 2 jeep xj's !! Thank you !!!
Glad it helped! Cheers 🍻
this is virtually identical to how my '63 VW window latch works- thanks for the great video!
Glad to help!
Excellent video. I will have to try to get that tiny pin out which I didn't even know came out. Glad I stumbled across this video.
This by far my favorite TH-cam channel.
Thank you for this video. My 95 Dodge van has been driving me crazy with wind noise. Not any more!
This is a great tip . Thanks for sharing it .
Thank you for the video! I was able to get the window latches closing much tighter thanks to your video! Needed to also replace the white plastic nub at the end of the drivers side latch and was again able to thanks tk your video!
Glad it helped!
Thank you this is a short but sweet video such an easy fix again thank you.
Glad it helped!
You are the star!
I have a 1980 Dodge Ram Van B350. There's still tons of Dodge campers with the exact same vent window assembly as your Cummins Dodge. I'm going to recommend this video next time I meet someone with noisy vents on their camper. Mine certainly are noisy :p
Thanks for watching, glad I could help!
Thank you! great video
Thanks! Glad to help.
Thanks for Sharing.
No problem!
I tightened my screw the just like you said and my truck set on fire 🔥
Def need to try this out. Thanks man.
The coin trick works too ;) lol
ya I saw the coin trick and thought god I’m an idiot could of done that this hole time lol
Thanks, I'm sure my 86 RC is the same way
Would you by any chance know if and how we an replace the sealing ? My vent on the driver side is noisy and it seems coming from the sealing...
I don't have a video and have not done it, but I would imagine you would have to remove the glass and assembly to remove and replace the seal.
Did that fix the wind noise in the vent windows?
It did for me!
You forgot to to put the spring washer back but good video had to replace mines recently.
No I didn't :)
Ok I missed it in the video
Any tips on repairing 1st gen Ram tailgates that don't have the aluminum trim? All of my tailgates have to be opened from the inside.
I repaired mine, but it does have that aluminum plate. What happens is the small plastic tabs break which keep the wires on the handle mechanism (much like any modern car). I took off the torx screws from the inside and then the side covers to access it all.
Thanks for your reply. I gues that this issue/problem will remain to be an ongoing issue for tailgates that don't have open panel access. I know the crappy designed plastic insert tab breaks, but getting access to it is impossible so far.
Maybe a dab of thread locker will help prevent it from coming loose again
Good tip!
I need to find a replacement hand for the drivers' side of my '88 Ram
Time to hit the wreckers!
@@OvensGarage Sadly, I've got nothing local. Going for a drive on Wednesday, three-hours Plus to get to the next closest wreckers.
@@That_AMC_Guy Good luck!