1992 Dodge First Gen Cummins power window motor install tips.

แชร์
ฝัง
  • เผยแพร่เมื่อ 9 ก.ย. 2024
  • Swapped a new motor (Dorman 742-307) to fix my power window. Much easier way to get the job done than method the service manual describes. After three access holes are drilled, it is simply a matter of unplugging and unbolting old motor, installing new motor. EASY !!
    1989 and earlier driver side 742-301
    89 and earlier passenger 742-300
    90-93 driver side 742-307
    90-93 passenger 742-306

ความคิดเห็น • 19

  • @Hllbllybdass
    @Hllbllybdass 3 หลายเดือนก่อน +3

    doing this same job tomorrow without having ever heard the horror stories or warnings. I probably woulda lost a finger lol!! thanks for the tip/info!!

  • @rf9143
    @rf9143 ปีที่แล้ว +2

    I usually never comment, but you made a very good video. Good job

  • @charlesleonard7254
    @charlesleonard7254 4 ปีที่แล้ว +1

    I have been putting off this job for the same reason that you did. At the last minute, I found this video of yours. Thank you for making this video.

  • @tstreettstreet9957
    @tstreettstreet9957 4 ปีที่แล้ว +1

    Your story is the same as mine, I’ve had the motor for almost 2 years but fear got the best of me. After watching your video, I installed the new motor in under 20 minutes. Thank you

  • @MarkShinnick
    @MarkShinnick 3 ปีที่แล้ว +1

    Huge help, very well done !!! Mine's been dead for about 15 years ...finally getting 'round to it :)

  • @pugilistjones1374
    @pugilistjones1374 4 ปีที่แล้ว

    Man that trick is a friggin life saver, 3 big gold stars.

  • @daviddowning5202
    @daviddowning5202 3 ปีที่แล้ว

    Wish I could buy you a beer, that was so easy!! I used a 1” hole saw bit, just in case I was a lil off on the bolt location, super easy!

  • @jwbroyles1
    @jwbroyles1 ปีที่แล้ว +1

    I watched 4 videos on this, yours was easily the best. Followed your method and it took me 30 minutes start to finish. Works perfect! Thank you for taking the time to make the video. I wonder how many years the previous owner put off this job?

    • @AKBAKWUDS
      @AKBAKWUDS  ปีที่แล้ว +1

      Glad it worked for you !

  • @timothyloudermilk9478
    @timothyloudermilk9478 11 หลายเดือนก่อน

    great idea , thanks for the vidio !

  • @kissisawesome1231
    @kissisawesome1231 5 ปีที่แล้ว +1

    thank you very much this helped a lot

    • @AKBAKWUDS
      @AKBAKWUDS  5 ปีที่แล้ว

      Glad to hear !

  • @lostpirateranch1652
    @lostpirateranch1652 3 ปีที่แล้ว

    Thank you
    Very helpful info

  • @harrisonvallaro6231
    @harrisonvallaro6231 4 ปีที่แล้ว

    Sweet, thank you.

  • @317808941
    @317808941 3 ปีที่แล้ว +1

    Can you post what motor you installed? Thank you.

  • @pbleek3489
    @pbleek3489 4 ปีที่แล้ว

    Window on my 93 is running slow. Noticed that there's a lot of play in it when I put my hand on the glass. Think the glass is coming loose from the track or regulator is bad. Can get to the track to re-glue while in the door, or do I have to pull the regulator? Know of any videos on pulling the regulator? I'm a little scared of the spring (it's in a lot of posts).

  • @twdowns9131
    @twdowns9131 2 ปีที่แล้ว

    Where you get your motor for window.? Thank ya

  • @nickolaskellerman1483
    @nickolaskellerman1483 ปีที่แล้ว

    Where these crank windows before?

    • @AKBAKWUDS
      @AKBAKWUDS  ปีที่แล้ว

      No, factory LE power windows.