How to replace suspension rods and springs on a top loader washing machine

แชร์
ฝัง
  • เผยแพร่เมื่อ 8 ก.พ. 2025
  • How to replace suspension rods on a top loader washing machine
    Model used: Panasonic NA-FS14G3
    Washing machine shaking, wobbling and knocking - solved

ความคิดเห็น • 35

  • @Rogehood
    @Rogehood 8 หลายเดือนก่อน +3

    Thanks a lot, we have the same brand of w.machine I will do the same.

  • @nadimbgn6513
    @nadimbgn6513 2 ปีที่แล้ว +3

    Useful video 🤗

  • @GK-xk6uo
    @GK-xk6uo ปีที่แล้ว +1

    If the drum in down a inch than it should be would it be the suspension rods?

  • @nothankyou-kc3up
    @nothankyou-kc3up ปีที่แล้ว

    So helpful thank you!!!

  • @Tig3rKen
    @Tig3rKen 2 ปีที่แล้ว +1

    Exactly the video i needed - You are great - i will deff sub and follow. Thanx for the videos......

  • @jmdds
    @jmdds 2 ปีที่แล้ว +1

    This is a clever design to reinstall the rods compared to crappy Simpson where one have to tilt the machine to complete remove the broken and reinstall the new rods.

    • @jackelbrash3444
      @jackelbrash3444 2 ปีที่แล้ว

      That's what i was hoping to find , a video to show rod replacements for my Simpson 7.5 kg.
      I gather from your comment , that it's not as easy to do as this video ?
      I'm a mum , and would kill to be able to do this myself , as i don't have the ridiculous labour fee they're asking.
      How did you end up with your fix ?

    • @GorgyPorgy65
      @GorgyPorgy65 9 หลายเดือนก่อน

      @@jackelbrash3444 Do a search...there are videos of a Simpson.

  • @cmcg1190
    @cmcg1190 ปีที่แล้ว

    very helpful, thanks!

  • @Solo_1914
    @Solo_1914 5 หลายเดือนก่อน

    Thanks for sharing ☺️

  • @sarabjeetsingh3474
    @sarabjeetsingh3474 4 ปีที่แล้ว +2

    Helpful video

  • @aashishnagpal9907
    @aashishnagpal9907 2 หลายเดือนก่อน

    What are those sockets on body that hold rods and can they be replaced

  • @JothamNgugi
    @JothamNgugi 8 หลายเดือนก่อน

    I would like to know how to replace downstairs of the machines

  • @ramuk410
    @ramuk410 ปีที่แล้ว

    Which brand is this??

  • @tengapil7214
    @tengapil7214 2 ปีที่แล้ว

    nice one

  • @3mspecialhits37
    @3mspecialhits37 4 ปีที่แล้ว

    The diameter of the suspension holder is minimum or the maximum side is good.

    • @ecologicaltime
      @ecologicaltime  4 ปีที่แล้ว +3

      i don't understand your question. Please ask it again differently.

  • @nabilbeydoun4176
    @nabilbeydoun4176 4 ปีที่แล้ว +2

    Asking for Simpson 7.5 ezi set

    • @lindsayholden5959
      @lindsayholden5959 2 ปีที่แล้ว +1

      I have same prob as you... drum belting casing when spinning and noisy too.

    • @jmdds
      @jmdds 2 ปีที่แล้ว

      @@lindsayholden5959 Replace the 4 connecting rods will fix it.I just did the same thing for 3 customers.The stupid red plastic shock absorber keep breaking.

    • @jackelbrash3444
      @jackelbrash3444 2 ปีที่แล้ว

      @@jmdds Wish you lived next door to help me fix mine ! Lol
      Should i buy the plastic shock absorber as well when i buy the right suspension rods ?

  • @angelalewis8763
    @angelalewis8763 ปีที่แล้ว

    I replaced the rods but my washer is still off balance!?!?! Help lol

  • @julianfreto1666
    @julianfreto1666 3 ปีที่แล้ว +1

    This the same Panasonic that had a drum fault? It looks fairly new bad engineering i would say

    • @johndoe-vc1we
      @johndoe-vc1we 2 ปีที่แล้ว

      Any pointers on this drum fault yu mention and whether it exists with other machines ?

  • @JalakLenteng
    @JalakLenteng 3 ปีที่แล้ว

    Are the rods universal?

    • @GorgyPorgy65
      @GorgyPorgy65 9 หลายเดือนก่อน

      No, I don't think so.

  • @The-Spectacles
    @The-Spectacles 7 หลายเดือนก่อน

    The oats 💪😂

  • @ashutoofani6675
    @ashutoofani6675 4 ปีที่แล้ว

    Sir my machine was noising during spinning and hitting the body during spinning
    I replaced clutch assembly complete, pully new noise gone but still its hitting the body during spinning on front left side now i replaced the spider base but again same problem could you suggest any idea.
    Suspension rods are ok and in correct position put i.e blue back white front.

    • @bharatbosamia8814
      @bharatbosamia8814 4 ปีที่แล้ว

      Try check length of suspension rod little short rod both them put back side and long one should be on front side. If after that problem still coming then you need to change whole complete gear box mainly gear box bearing got bad.. which result super vibration.m

  • @GorgyPorgy65
    @GorgyPorgy65 9 หลายเดือนก่อน

    Make sur eyou unplug it even if switched off !

  • @anumanthu5450
    @anumanthu5450 ปีที่แล้ว

    SUPARRRRRRRR

  • @notagain1952
    @notagain1952 3 ปีที่แล้ว +4

    Replacing the rods does not fix the design flaw and everyone misses that.

    • @umarmars47
      @umarmars47 2 ปีที่แล้ว +1

      What is the design flaw?

    • @jmdds
      @jmdds 2 ปีที่แล้ว +2

      @@umarmars47 the stupid plastic shock absorber keep breaking and it should have been a sort of rubberised instead.

    • @SolarFoxy
      @SolarFoxy หลายเดือนก่อน

      @@jmdds the rubber one can't hold long as well , just like the rubber shock absorber in those cheap aircon nowadays, they start have issue just about 3 to 4 years. and yes, they all design and build to be failed. which is Planned Obsolescence...