How To Replace: LG/Kenmore Washer Suspension Rod Kit AJK72909308
ฝัง
- เผยแพร่เมื่อ 2 ธ.ค. 2019
- Install LG/Kenmore Suspension Rod Kit AJK72909308 www.appliancepartspros.com/lg...
Symptoms: tub bangs, tub sags on one side.
Tools: Phillips screwdriver, putty knife, strap with hooks.
This LG/Kenmore made Washer Suspension Rod Kit replaces the following older part numbers on LG Washers: 4902EA1002F, 2758535.
Buy the new Washer Suspension Rod Kit AJK72909308 here: www.appliancepartspros.com/lg...
Most orders delivered in 2 business days or less.
If you enjoyed this video, please click the like button. Subscribe to this channel for more appliance repair tutorials.
If you need any more technical advice, call us at 1-877-477-7278 or chat with us on our website www.appliancepartspros.com/. We're available 7 days a week.
Follow us on social media for more appliance advice, information, and tips.
Facebook: / appliancepartspros
Twitter: / applpartspros - แนวปฏิบัติและการใช้ชีวิต
Great video! Be aware that on newer models do not use a putty knife to open the top front of the machine. There are two screws located on the left and right front top of the washer. These screws are covered by plastic caps that must be removed for access.
thanks for the very easy to follow instructions! Took less than 20 minutes! $75.00 shipped to my door for the four rods, cheaper than a house call from a repair shop!
Very good lesson. Very clear. Many thanks
You are welcome. glad we were able to help you out. If there is anything we can help you with in the future please let us know.
There is a sticky residue on the lower end of the rods. This is all that needs to be replaced. The metal springs are fine. This sticky residue turns the spring rods into shock absorbers. Too many people think it is a lubricant or they remove this stuff and apply grease. You will only make things worse.
Appliance companies are making a killing selling these spring kits when all we need is more of that sticky/tacky substance.
What is it called and where can you buy it?
Great video. Saved me a ton of money!
Seems easy to do. Quick
thank you !
Great video I just did this repair to day watching this video thanks 😊
Should you clean off the residue on the brackets before putting the new rod into place? I didn’t notice you mention anything about it. I wasn’t sure if there is a reason you left the old (I’m assuming it’s lube?) residue behind? Or is it okay if I clean that off while I’m in there?
what is the lubricant. I have a top rod that makes noise moving around. Dry. what is the brand of lubrication?
can you add another video on replace LG AJK72989702, which has horizontal damper and used on Kenmore/LG 31422 washer.
What if the LG wt1101cw washer still vibrates on spin cycle after replacing suspension rods?
How much is the suspension rod for whirpol washing machine model-wwa-880-8.8 kg
model wt4970cw does not come apart with the putty knife. you have to take the screws out of the top base on the back side pick up slightly from the back slide forward about 1/2 inch and the top will come off. other than that it was just as the video!
Please Sar lubrication is complete name
The putty knife did not work for me. It was far too flexible. A flat head screwdriver worked immediately and was much less effort
The lube is like tar.
OMG these fix it videos are so freakin' annoying. Too much bla bla bla. Don't forget the stupid little wire ring that falls out into the box without you knowing until you've installed them all. It fits into the top.