Powerful Smooth Fishing Knot for Leader Braid to Mono or Fluorocarbon | Best Fishing Knots 2021
ฝัง
- เผยแพร่เมื่อ 27 ก.พ. 2021
- These are the other knots for fishing: palomar knot, uni knot, fg knot, gt knot, blood knot, albright knot, snell knot, double uni knot, clinch knot, trilene knot, improved clinch knot, loop knot, yucatan knot, braid twister knot, figure 8 knot, san diego jam knot, ashley stopper knot, paracord knot.
You can also try this knots for tying leaders:
• Strong Smooth Fishing ...
• 900% Best Fishing Knot...
• Fishing Knot 100% That...
• Powerful Smooth Fishin...
• 10 Seconds How to Tie ...
Fishing Knots Tutorials:
• Unbreakable Fishing Kn...
Please don't forget to subscribe.
Salt and Fresh water fishing blogs and tutorials
Thank you
God bless!
Follow my on Facebook:
/ genefishingtv
Instagram:
/ genefishingtv
Twitter:
/ genefishingtv
#nudospesca
#simpulmemancing
#strongfishingknot
#caraikatkail
Wow you nailed it. I needed this (I’m losing trust in my current knot). Your speed, camera angle, everything was on point. Even music. Cheers to less break offs!
a million thanks buddy 😘
@@GeneFishingTV absolute solid knot :) not sure how itll go when it travels through the tip eye on a 3-6kg flick rod for river. but we shall see.
Absolutely right great job 👏
You using the uni knot too? That knot kept catching my bait casters spool and bird caging it today I got so mad lol. Never had a problem using the double uni knot until today and I about freaked out over it threw less weight on the end threw more weight and no matter what it kept bird caging before it even hit the water. I cast slow thew it fast under handed it flipped it nothing made a difference
I will say, I found this knot very easy to tie, and, it does seem to hold VERY well. I run the braid tag end through the loop and around the braid live line one more time then you do, and I also found that you have to pull the braid tag and live ends, each a little at a time, to keep the knot from balling up ( and if it balls up, it will fail and slip immediately) and if you do, it is a very thin knot that will pass through guides well. Also, I use nail clippers to cut the lines, as I am afraid I will overheat the knot or live fluoro and weaken it, and melting the fluoro leaves an unneeded ball of melted line as well, so more bulk.
I was using this knot on the manistee river in Michigan and I pulled in a 39in king salmon with it. I have so much trust in this knot now
thats amazing experience thanks for sharing buddy🥰
Been off the water for a couple years and wanted to refresh my braid to mono knot tying skills. This added a step to my knot that I used before but I like it. Old fishermen can always learn new skills! Thanks Buddy, I go in for cancer surgery in a couple of weeks but found a open spot on a boat and if I connect to a BF I do NOT want to loose it for an operator malfunction! I think I owe you a Beer!
Thanks God bless🙋♂️
I am new to this. I tie this knot using 30 lb. braid to 30 lb. leader and it was easy. This is a great tutorial, now it's time to catch some fluke and porgies.
This is gonna be a game changer for me. Thanks a lot brother. Been fishing for a few years now and never stepped out of double uni. This is the first time I'm gonna try another knot. Will let you know how it goes 😊👍
Glad to hear it! thanks buddy
Thanks for sharing this instructional video!
I used what you taught me and landed a few nice slot Reds!
Just tied this for my first mono to braided line it was super simple. Thank you!!!
Glad it helped! thanks a lot
Looks like a quicker alternative to the alright knot I tie for mono backing to braid, but not thinner than FG for leader if getting through micro guides is an issue.
Thank you. This is a very simple and really easy knot to do. 👍🏼
You’re welcome 😊
Using this knot for about 5 years, smooth, strong and easy to tie great video
Thanks good to know buddy
👍
Quality on the video was really good, simple, easy and straightforward
Glad you liked it!
Easiest video ever for a leader line knot. Awesome
As others stated. Thank you. This was super easy to follow along. I watched it once, then played it again and did it....
Glad it helped!
I tried the FG knot no hope looks easy when using 30 pound braid. Doing it with 8 like cotton near impossible. Tried this knot hot first time. Goes through guides easily. Thanks
Thanks for sharing!
my husband and I go fishing from time to time! super relaxing this would be helpful for us!
thanks a lot
This is the best one, and Very simple. Thank you very much
Super nice and strong Knott! I use it for l.r.f and I use f.g Knott for shore jigging. Thank you so much sir..
most welcome buddy
So much easier to remember than the GT or FG when on the shore, thank you. I usually stick to the Uni T for that very reason but this looks quick, easy and secure. Thanks for sharing
Just learn how to tie an FG. Once you learn something you don't need to 'remember' it
On all my braid to flouro connections, I use the risotto knot with a touch of glue. I doubt I'd this not approximately 30 times and I love it. I hope Toit tests it.
Thanks for sharing!
Thanks for the video, strong looking knot. The allbright knot i use goes through the loop as you did then 4 winds down awsy from the loop, 8 winds back towards the loop, through the loop and pull up. It makes for a much slimmer knot.
Thanks for the info buddy
Id like to see a video of your knot. Because the way you mentioned is doing what he did then another 4 winds then 8 that makes it all his winds plus yours, thats a lot of winds
My bad i get it know, it’s just like the Albert knot but instead of 7 one way and 7 the other way you do 4 and 8.
@@JESSEPAVON yes 4 away, 8 back and then through the loop, pull up and trim. The extra loops he did upon exit makes the knot much fatter. 4 and 8 allbright knot averages about 70%
improved Albright Knot, give Capt. Jimmy some kudos.
Wow! Super cool to stumble upon this easy knot. I’ve tried the fg a few times and I’m not too comfortable with it. Practice makes perfect but I got this knot on the first try. With a little extra strength I added a few more turns. 15 roundabouts in the beginning and another 5 in the loop. Then added some saliva before pulling together and it’s super strong.
thanks for sharing
Thank you for the fishing cover tips, sir, it's useful for us, fishing hobby - Indonesian angler
Thank you for the video,I think this kind of fg knot is much more easier
You're welcome 😊
So much detail, nice work on tying, lets try it.. Big thanks suhuuu
Very useful & safe for fishing,,
Thank you for sharing this ,
God bless..👍
I am absolutely useless at knot tying, but I've learned two that satisfy all my needs. I connect fluorocarbon to braid using a simple six wrap surgeons knot, and I tie hooks, swivels and line clips etc using a uni knot
thanks for sharing buddy
This knot is looking smooth and simple 👍
Good new knot
Thank you my dear friend 👍😊🙌🙏
Thank you so much for the angles... as a person with autism these type of angles are what i need in order to learn from a video again thank you
Thanks a lot Josh, Im happy I could share the knowledge
Thank you for making this video! This is super helpful!
thank you too buddy
Ayos master ,, daming makukuhang kaalaman dito
Nice sharing..idol👍👍
Thank you po for sharing this. I will show this to my Mother in law who loves fishing.
Thank you bro
Thank you! Best easiest compared to others!
Thank you i do this leader like this very easy and strong ☺️
Thanks buddy
Various ways you've shared it.. Thank you my friend
Simple ways
A million thanks too bro 🙌😊
@@GeneFishingTV 👌😉
Thanks for the knot ! You saved my whole day🙏
makasih kawan 😊❤
Excellent video and I was going to try that knot and I still might but without the lighter because I would never let he get that close to my line. I prefer the surgeons knot because it is quite similar and would never let loose.
thanks for sharing bro
If you are concerned about burning your line lubricate the knot and line with saliva and dry the tags then burn them while covering the rest of the knot with your pinched fingers
Npakalinaw at npakadaling sundan na tutorial master..madami na nman matutulungan ng gaya kung anglers na dip alam tong knot na to.
many thanks master god bless
@@GeneFishingTV wc master
So I learned you're not and I got to tell you thank you so much for taking the time to show the demonstration❤
You are so welcome Kenneth
I watched the entire thing .. will still go for the FG.
thanks a lot buddy😍🙋♂️
Laking tulong po nito sa mga mahilig s.fishing po.Very good kaya full support.Eblue na natin lahat sa mga andito .Bagong kaibigan po.Sa mga nakakita suportahan tayo.
many thanks po god bless
I like the locking part of the knot. Gotta try it and see how it performs. Thanks!
Thanks buddy
Learn the Alberto and do the same locking of the tag with only one pass.
Wow Ang galing ni sir sakto talaga sir na nakita ko video mo Dami kurin mga pangawil na dala sir,matibay talaga yun di basta2 matanggal
glad I could help sir keep safe god bless
Thanks!! Worked perfect and good idea to use lighter to melt the ends!! :)
You're welcome Ira 😊🙋♂️
I learn a lot from this chanel..step by step process very easy to catch up..
thanks my dear
easy and strongest knots i've try. awesome bro
Looks like a modified Albright knot. The difference being fewer wraps than an Albright and the three additional turns to the inside of the leader.
Looks promising!
Personally, I prefer putting a tiny drop of super glue on the knot. It works like a champ. I don’t have to deal with burning anything and a tiny drop is all you need.
In the field I don’t use either, and hope everything holds! 😉
Kinda like a Reverse Alberto with locking half hitches.
VERY STRONG KNOT! Subscribed.
thanks buddy
one of the easiest ways to understand how to do the knot
Thanks John
THANK YOU SO MUCH BRUH I TRIED SOME OTHER KNOT AND IT KEPT SLIPPING DID THIS THREE TOMES ANS IT WORKED 🎉
Glad I could help
thank you so much guys for this video👍🏻
Our pleasure! 😊
Probably one of the Best Videos I've seen. Great Job !
Wow, thanks a lot
Thank you for the wonderful Clip. the clip came out perfectly. May God give you maximum health! note 10+ 🙏
thanks a lot
I always enjoy your videos. Nice video. Watching from Philippines. Keep safe and God bless always⛵🐟🎣🙏
Thanks! You too!
You had me at Lighter! Thanks
Thanks Federico
Good knot, great video. Using light tackle, I found that I need to trim the tag ends as close as possible, otherwise the knot ticking the guides when casting, which is not good for the knot and casting distance.
You are correct buddy always experience will make you learn more and fix things. Kudos
Instead of a lighter I use a soldering iron. For me it is more accurate with less risk of torching the fluoro. Thanks for the great tutorial.
Good tip mater thanks for sharing
It’s got to be nice using a soldering iron in the middle of the lake, on the kayak.
@@JESSEPAVON Right?! Lolll 🤦🏻♂️😅
Definitely gonna try that knot
Thanks John 🙏😊🙌
Прекрасный узел!! Спасибо!!!
thanks buddy
Stumbled across ur vid 2day. Tied my leader to my braid, 20mins out the beach & tested it... 👍🏼 kahawai on the line. There's dinner 👌🏼. Cheers
Glad to hear it!
I'm gonna give this knot a crack mate!
Cheers for the video.
If you ever get to Western Australia, I'll buy you a cold beer.
thanks a million buddy 🥰
Mas simplified sya master Gene. Interesting. Gi save na nako sa akong tutorial playlist😊
salamat master hehe God bless.
Sir. Dahil sa inyo natutu ako mag shore jigging😎
maraming salamat sir nakatulong ako enjoy fishing po God bless
My friend I love this knot. Please make a video using 6# fluorocabon to 20# braid. PLEASE
I really enjoyed watching, thanks for sharing..
Thank You Gene Fishing TV! Does this knot have a name? This will become one of my go-to knots for sure…
It's improved Alberto knot brother thanks for watching my video. Happy holidays😊
thank you for sharing your knowledge 👍
So nice of you thanks
謝謝分享。簡單,易學,實用。
Bago learning na nmn master tnx
salamat master God bless
Great video.. learned a lot.. thank you
Glad it was helpful!
Tamsak done po, fb brought me here. Nice tutorial po. 👌 godbless
Stay connected
Nice video sir.. very helpful..easy to follow..keep it up
Thanks and welcome
I was with him right up to where he burn the tip of the mono, it will make it larger and more likely to catch on your guides when casting, in my opinion.
Salamat sa kaalaman master 👍
Welcome master God bless
You’re doing gods work 🙏
Thanks buddy
I’ve used this knot for years until I found the FG. The FG goes through guides much better, but takes more time and practice. Thanks for your knot tutorials, I even love the music , maybe because I also play guitar 🙌🤷🏻♂️😜
thank you very much dear😊
@ will perryman look up salt strong here on youtube. He shows you a very easy way to tie the FG knot
@@hansstarkweather8509 Thanks I have seen and used the one using my/your pinky finger. It’s amazing how the FG knot keeps getting simplified and easier to tie. 🤷🏻♂️✊
I've been using the alberto knot for years and never had an issue.
Main thing is to pull two opposite ends slowly and keep it moist, it will lock itself in.
Nice video...ty
Thanks my friend
I have been using this knot for about 3 years now, I have never had one break off! I would love to know the exact name of this knot!
Its improve albright knot buddy
SIMPLESMENTE O MELHOR NÓ PARA EMENDA DE MONO COM MULTI
Thanks a lot for watching buddy
Ang simple lang pala niyan thanks for sharing
welcome bro
Wow, thanks Gene for sharing this, I'm gonna try this one! Greetings from Holland, Pat.
Have fun! thanks a lot Pat
So good ❤
Knocked all my guide inserts out nice knot,like casting a swivel through my guides
Ah, next time, don’t use 100lb trace and mainline to cast.....
@curly Que2 on casting, I use this knot at 1 meter leader length to make sure the tie will not pass the guide specially on a thicker line.
Best vid on TH-cam. Thank you
Glad you enjoyed it
Ganda naman thanks for sharing I'm here na
salamat po
These knots are two million times easier when your using 80lb test! I’d like to see him tie this with 10lb braid and 6lb floro.
Great suggestion!
Thank you for the tutorial. Is it good for thinner lines like those used for light rock fishing?
Yes, definitely
ganun po pala un malaking tulong sa mga gumagawa ng Tali 🙏
Looks interesting. The only issue I see is that you have the mono/fluoro tag pointing straight at the guides when casting
Brazil. Está emenda é Top.
Best method i hv tried
Thanks
Best of the best knot, I've Try
thanks a lot
Nếu dây leder to hơn PE thì mối nối sẽ bị to tôi nghĩ là như vậy sẽ cọ vào khoen của cần câu. Tuy nhiên đây là mối siêu chắc tôi đã thử nghiệm! Tks bro
Thanks buddy
I've learned a lot, sir.
Thank you very much brother
ฉันขอบคุณสำหรับความรู้👍
cool cool cool master... ilmu lagi, tutorial lagi,,, asli bermanfaat ini master
makasih bang 👍😊🙌🙏
Excelente Video Amigo!!! Gracias!! Exitos y Saludos desde Salta Argentina!! 🇦🇷😉👍🎣✨
thank you amigo
Beautiful
Thank you
Tried other knots and didn’t work out so well, but this one was easy and quick , and wouldn’t slip like others
good to hear that buddy