Thanks so much for the encouragement! I hope and pray that others might heard that message and see the goodness of God and his love for them! Thanks for watching and sharing and may God bless you!
Nicely done. Homemade is the best. I don't have a welder or that kind of skill. Assuming I could get someone to weld the T for me, I think I'd try putting notches about every 6 " in the top side of the pipe big enough for 3/8" cable. Not deep enough to weaken the pipe, but enough to hold the cable and maybe on about a 30 degree angle to provide a straighter pull. Then make a loop of cable that will connect to the stake with a tow hook. Put the cable loop over the puller, hook to stake, put cable in notch at the desired distance, and pull away. Adjustment would be quicker and easier. Just release the tension on the pipe/cable, slide the cable to the next notch and pull again.
That would definitely work. You could even use a smaller cable with a loop on each end. Run the one loop inside the other, slip it over the pipe and then hook a link to the other loop. That way you can slide the cable up and down the pipe and when you go to lift it should tighten around the pipe. Thanks for watching and may God bless!
You're welcome! Glad it was helpful to you. It's not that hard to build, but boy does it make things a whole lot easier! Hope you enjoy your new puller. Thanks for watching and God bless!
I just use a dead tree limb laying around. Wrap the chain around the limb a foot or two up and lift the other end of the limb. Nice and easy, nothing to bring with you, nothing to lose and nothing to buy.
Awesome tool modification it helped me with my log cabin deer blind and i Love the ending Brother keeping our eyes on the cross is essential, nature is the perfect place to experience his love!
Thanks so much for the encouragement and so glad it helped you! Thanks too for watching and as you said it's all about the cross and our relationship with the Lord who made us! God bless!
I had made one like you said about. I like the adjustment you got. I use a chain to pull rebar . Wrap it around the top of the stake and pull . And adjust the chain down further to pull the rest of the rebar out. I have problems also . Nice to see . Also I made my out of square tubing.
So glad you found the video helpful and your new stake puller is making your time out in the field a little easier! Thanks so much for taking the time to share and for watching and may God bless you richly!
Hey dnhaarre thanks so much for checking out our channel. Learning to weld will open up a whole new world of DIY projects for you and it is fun too! Great luck with that! Also if you need any advise or help with this project just shoot me off a comment. Thanks for subscribing too! God bless!!!
At last - I see a vid where someone can actually weld - hah! Thanks so much Frugal Sportsman for giving trappers this free gift. May God strengthen you brother - "Trapper Pete" - NQ Australia
Peter thanks so much for your kind words and you are more than welcome for the info! I hope you can put it to great use. Thanks too for watching and may God bless you my brother!
Thanks so much! This puller has been so easy to use and really saves the back. Hope it helped and have a great season! Thanks too for watching and sharing and God bless you!
Great idea! Thanks for sharing. One possible modification would be to get a slightly larger diameter 3-4" length of pipe to slide over the long pipe and tap a threaded hole in this piece.
You're more than welcome! That's a great idea you had and would certainly work well! You could then attach a quick link using something like a muffle clamp and have a completely no weld system. Good thinking Bryan! Thanks so much for watching a sharing your thoughts! May God bless you and your season!
Great idea and great video. I don't have a welder but will use my ice chisel and wrap wire around and a quick link like you suggest and I bet it will work as the chisel is 5' long.
Thanks so much! Yup that is what I originally did was use a looped cable and choke it off and then just add a quick link. If the cable wants to slide down the pipe just add a hose clamp(s) wherever needed as a stop to keep the cable in place while you are pulling. Thanks for watching and God bless!
Glad you liked the video and thanks for the positive feedback! I would definitely encourage you to make one. It works better than anything I've used. Thanks for watching and God bless!
That is very helpful buddy thanks for sharing! I just picked up your channel and looking forward to watching more of your videos! I have a video on my channel for removing earth anchors too if u want to check out?
Last part of the video was the best !!
Thanks so much for the encouragement! I hope and pray that others might heard that message and see the goodness of God and his love for them! Thanks for watching and sharing and may God bless you!
Really cool design god bless and pray for healing
Thanks so much for the encouraging words! Thanks for watching. God bless and I'll keep you in my prayers!
Nicely done. Homemade is the best.
I don't have a welder or that kind of skill. Assuming I could get someone to weld the T for me, I think I'd try putting notches about every 6 " in the top side of the pipe big enough for 3/8" cable. Not deep enough to weaken the pipe, but enough to hold the cable and maybe on about a 30 degree angle to provide a straighter pull. Then make a loop of cable that will connect to the stake with a tow hook. Put the cable loop over the puller, hook to stake, put cable in notch at the desired distance, and pull away. Adjustment would be quicker and easier. Just release the tension on the pipe/cable, slide the cable to the next notch and pull again.
That would definitely work. You could even use a smaller cable with a loop on each end. Run the one loop inside the other, slip it over the pipe and then hook a link to the other loop. That way you can slide the cable up and down the pipe and when you go to lift it should tighten around the pipe. Thanks for watching and may God bless!
Thanks Great Idea, will make one this week. Better that ordering one.
You're welcome! Glad it was helpful to you. It's not that hard to build, but boy does it make things a whole lot easier! Hope you enjoy your new puller. Thanks for watching and God bless!
I just use a dead tree limb laying around. Wrap the chain around the limb a foot or two up and lift the other end of the limb. Nice and easy, nothing to bring with you, nothing to lose and nothing to buy.
Thanks for the suggestion. Thanks too for watching and may God bless!
@thefrugalsportsman no problem, keep up the good work and good luck on the trap line this year!
Awesome tool modification it helped me with my log cabin deer blind and i Love the ending Brother keeping our eyes on the cross is essential, nature is the perfect place to experience his love!
Thanks so much for the encouragement and so glad it helped you! Thanks too for watching and as you said it's all about the cross and our relationship with the Lord who made us! God bless!
Great idea!
Thanks! I hope it was a help for you! Thanks for watching and sharing and may God bless you!
Thank you.
This will help removing rebar.
Thanks! So glad you found it a help. Thanks too for watching and may God bless you!
I had made one like you said about. I like the adjustment you got. I use a chain to pull rebar . Wrap it around the top of the stake and pull . And adjust the chain down further to pull the rest of the rebar out. I have problems also . Nice to see . Also I made my out of square tubing.
So glad you found the video helpful and your new stake puller is making your time out in the field a little easier! Thanks so much for taking the time to share and for watching and may God bless you richly!
@@thefrugalsportsman You are welcome
awesome ideas.. n love the message at the end!!!! bless you sir
Thank you so much and thanks too for your encouraging words and for watching. May God bless you richly!
Great job on the puller and great video!
Thank you so much for you encouraging words! I appreciate it! Thanks too for watching and may God bless you richly!
Not bad ol timer, I think I'll make one up, stay strong, peace out!
Thanks I think you will be very pleased in making one of your own. Thanks so much for watching and may God bless you!
Good job. Getting old is no fun. I'm 63 and can't do what I used to.
Thanks! I hear you. My mind thinks I'm 25, but my body tells me I'm not. Thanks so much for watching and may God bless you!
Thanks for your time and help this is a great and clean video 👍🤠
You are so welcome and hope you found it a help! Thanks so much for watching and may God bless you!
Really enjoyed,very informative, thanks
Thanks and so glad you found the video a help! Thanks too for watching and may God bless you!
Very well done
Thank you very much! I appreciate the encouragement! Thanks for watching and God bless!
Thanks for the NT reference.
I retired from a university. Lots of decent people, but also a few bad apples. Thanks again.
You are welcome! I hope you are enjoying your retirement and getting ready for the fall. Take care and God bless!
Super great video and witness!! Amen!
Thanks so much! I hope it was a help to you and may God bless you richly!
I like your design gonna build one thank you
It really works well and I know it will for you too! Thanks so much for watching and may God bless you!
great idea brother
Many many thanks! I hope you found the video helpful! Thanks for watching, take care and God bless!
God bless you my friend
Loved your vid👍🏻❤️🙏🏼
Thanks you for your kind words! I appreciate them. Thanks too for watching and may God bless you as well!
Great idea!!!
Thanks so much and I hope the video was a help! Thanks too for watching and may God bless you!
Well done. You get the info out clearly with little fat. Use as little or much as needed.
Thanks so much! I appreciate the positive feedback! Thanks so much too for watching and sharing and may God bless you!
Just learning how to weld. This will be my first project. Excellent idea and very well explained.
Hey dnhaarre thanks so much for checking out our channel. Learning to weld will open up a whole new world of DIY projects for you and it is fun too! Great luck with that! Also if you need any advise or help with this project just shoot me off a comment. Thanks for subscribing too! God bless!!!
At last - I see a vid where someone can actually weld - hah! Thanks so much Frugal Sportsman for giving trappers this free gift. May God strengthen you brother - "Trapper Pete" - NQ Australia
Peter thanks so much for your kind words and you are more than welcome for the info! I hope you can put it to great use. Thanks too for watching and may God bless you my brother!
Good ides of the slider.
Thanks so much and thanks too for watching and may God bless you!
I am going to make my just like yours.
👍
Well thought out,I’ll get right on that.
Thanks and so glad it was helpful to you! Thanks so much for watching and God bless!
Excellent design. Way to go my friend.
Hey, thanks so much for your kind words! I appreciate it and thanks so much for watching too! God bless!
Great idea. Good job. I can weld so I may just make one of these. Thanks
Thanks so much! This puller has been so easy to use and really saves the back. Hope it helped and have a great season! Thanks too for watching and sharing and God bless you!
Nice job Brother!
Thanks so much! I appreciate the encouraging words! Blessings!
Great idea! Thanks for sharing.
One possible modification would be to get a slightly larger diameter 3-4" length of pipe to slide over the long pipe and tap a threaded hole in this piece.
You're more than welcome! That's a great idea you had and would certainly work well! You could then attach a quick link using something like a muffle clamp and have a completely no weld system. Good thinking Bryan! Thanks so much for watching a sharing your thoughts! May God bless you and your season!
Nice!
Thanks and I hope you found the video a help! Thanks too for watching and may God bless you!
That’s an awesome idea.great video, Great closing comments.
Thanks so much for the encouraging words and to watching! God bless!
Awesome video!! Its amazing to hear such positive words from a Godly man as well.
Thank you so much for your encouraging words. It means a lot! God bless and thanks for watching!
Great idea and great video. I don't have a welder but will use my ice chisel and wrap wire around and a quick link like you suggest and I bet it will work as the chisel is 5' long.
Thanks so much! Yup that is what I originally did was use a looped cable and choke it off and then just add a quick link. If the cable wants to slide down the pipe just add a hose clamp(s) wherever needed as a stop to keep the cable in place while you are pulling. Thanks for watching and God bless!
Nice thank you
Your welcome! Thank too for watching and God bless!
Great video thanks for sharing great ideal I make out thank you
Glad you liked the video and thanks for the positive feedback! I would definitely encourage you to make one. It works better than anything I've used. Thanks for watching and God bless!
That is very helpful buddy thanks for sharing! I just picked up your channel and looking forward to watching more of your videos! I have a video on my channel for removing earth anchors too if u want to check out?
Thanks I'm glad it was helpful! I will definitely check out your channel as well. Thanks for watching and God bless!
That's for me I'm 77😂
Glad you found the video a help. The puller really does make it easy. Thanks for watching and God bless!