ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
Replacing your RV roof with a Dicor roof membrane
ฝัง
- เผยแพร่เมื่อ 21 ม.ค. 2015
- Replacing your RV roof with a Dicor Roof Membrane and EPDM Installation Kit. Each component in the kit is formulated, tested and proven in the field to work in combination to create an excellent bond.
Dicor Roofing Membranes:
Brite-Ply Rubber Roofing: dicorproducts.c...
BriteTEK Roof Membrane: dicorproducts.c...
DiFlex II TPO Roof Membrane: dicorproducts.c...
Dicor Installation Kit: dicorproducts.c...
Wow, great info. Thank you! I love dicor products. Getting ready to remove and replace all my trim and waterproof my old RV. thanks!
That's like historical back when they did stuff right 👍
Excellent video, very clear, concise, and educational Thank you
please do you havaer any store in ct state so i can buy your material thanks
Why would you remove a metal roof and replace it with rubber that sharp hail can shread.
Dicor is a brand name but it's still EPDM which can be had cheaper at any commercial roofing supply. Dicor caulk isn't the be all end all, like all rubber/ butyl based produces it drys out and cracks and must be maintained. People often misuse it making it less effective. OSI rubber works better if applied correctly.
Epdm does not dryout, rot, peroid.
The only failure happens when the flashing at termination bars, pipe seals, skylights, vents.
I been installing Carisle Commercial roofing products for over thirty years.
The video was spot on.
Cool, This will be done soon to my Tioga.
no sealant under/between the roof and the mouldings?? would make sense to have a gasket at this location instead of just gooping lap sealant on top. would last way longer
Old fashion butyl tape is still the best for that application, but automotive butyl might be better
Thanks for the great video and great products!
Glad you like the video, Garrett! Thanks for sharing your thoughts!
no sealant between membrane and existing surface on the side at the bottom of the termination bar? Easy place for water to be forced up during rain in transport.
Rain doesn’t go upwards
@@93corvetteguy must have never been to south Florida
WTH? I tried clicking on the links and all of them "could not be found". I know the Carlisle name. It's all we used when I was in commercial roofing. It is a shame. I just need a complete roofing replacement kit for my camper. Looks like I'll have to buy someone else's.
Just saying, that's not 3/8" plywood you are showing them installing.....likely 1/4".
Do as I say not as I do😂😂😊
Chad leadbetter has better tips to doing your roof without leaving tons of air bubbles or glue blob bulges don't try to do so much roof at once but more like 3-4 ft sections and finding a stapler that does the beefy 1/2 inch is a pain...
THANX SKIPPY!
great video very educational
How do you finish off the corners? Whats the best way to cut the membrane? Thx!
I am about to replace the vinyl roof on my slide out on my TV. does anyone have any suggestions or comments that could be helpful.
RV not TV lol
Don’t you have to apply adhesive under the whole length of membrane or just front and back?
the whole lenght
is this possible to do on a trailmanor 3124 pop up camper? it has a soft aluminum roof on it now... thanks
www.recpro.com has the aluminum u need or fiberglass whatever you choose!
What does this cost to have done?
John Bruce here in SF, it costs 6k to have it done. so I'm in the middle of doing it myself.
2023 $7000 + plywood repair if rotted.
@@MrJessyou123 doing it yourself or paying to have it done
Great instructions but it feels like it could be shorter lol
I hate my rubber roof. Wish I had fiberglass roof.
You need to fire who makes your videos.....