want to get 10mm front and 15mm back on mine since the front is naturally wider it needs less spacing out then get 25mm lower springs think it would look mint
I've got a set of Weller wheels I'm going to fit (the formula ford design with the holes, like pepper pots, not the star design ones) they're 7x15 and ET18. I've had a look on willtheyfit and it says that they'll poke out 36mm more than the standard. The difference being that my wheels aren't the standard st150 wheels, they're off a lower spec fiesta so the offset is crap. Could someone tell me what the ET of your wheels are please?
Not to worry, I've just found the specs. So the lip of the wheel will poke out 7mm more than your 28mm mods. I think I'm gonna get some 195/50/15s for a nice stretch to avoid rubbing. What coilovers do you have? I used to have HSDs on my BMW'S but they don't do them for these little cars.
I’ve ordered some of these and they’re arriving later today. But I’m disappointed that the original threads need cutting. Is that a must do thing to install these?
I was surprised, you may get away with just filing the dome off of the top of your original stud before the thread starts, we didn’t have the patience with the weather being as bad as it was though 🙃
@@MendItModIt yeah I bet! Would the wheels and bolts go back on fine if he decided to remove the spacers? Also a vid later down the line showing how they’ve held up and if they’re causing any complications etc would be lovely
Thinking about doing this to mine and if you use tipex/liquid paper it shows better so you can see who much to cut off Update: the biggest they do now is 20mm rear axle spacers
Halfords receipt test omg just to funny far to funny spat beer on the screen thankyou for that.🤣
25mm fit perfect all round no cutting or nothing just bolt on and go. had them on mine. All I would do is roll front arches
You got any photos of how it looks ?
Looks sick can't wait to get some spacers on mine
Do it! Get them 🔛
Receipt test, love it 🤣 good video mate
Getting 20mm spacers all round fitted can’t wait 😛 keep up the great videos
Yeah get them on mate they’re spot on 👌🏻
Ayy nice video man! Liking the LW hat ;)
want to get 10mm front and 15mm back on mine since the front is naturally wider it needs less spacing out then get 25mm lower springs think it would look mint
Looking good! How long till you get front spacers?
Can't believe you haven't mentioned this, and that nobody's asked.
How do the spacers affect handling / tramlining etc?
I've got a set of Weller wheels I'm going to fit (the formula ford design with the holes, like pepper pots, not the star design ones) they're 7x15 and ET18. I've had a look on willtheyfit and it says that they'll poke out 36mm more than the standard.
The difference being that my wheels aren't the standard st150 wheels, they're off a lower spec fiesta so the offset is crap.
Could someone tell me what the ET of your wheels are please?
Not to worry, I've just found the specs.
So the lip of the wheel will poke out 7mm more than your 28mm mods.
I think I'm gonna get some 195/50/15s for a nice stretch to avoid rubbing.
What coilovers do you have?
I used to have HSDs on my BMW'S but they don't do them for these little cars.
Has he had any issues with rubbing?
No rubbing on the fronts at all 👌🏻
I’ve ordered some of these and they’re arriving later today. But I’m disappointed that the original threads need cutting. Is that a must do thing to install these?
Idk it seems a little wrong to have to cut the original threads down
I was surprised, you may get away with just filing the dome off of the top of your original stud before the thread starts, we didn’t have the patience with the weather being as bad as it was though 🙃
@@tomboi123live I guess if they’re 20mm spacers and the studs are 21mm long there’s not a lot you can do 🥴 it is annoying though
Thanks for the replies. Is the Colorado Red one lowered or is that standard ride height?
@@MendItModIt yeah I bet! Would the wheels and bolts go back on fine if he decided to remove the spacers? Also a vid later down the line showing how they’ve held up and if they’re causing any complications etc would be lovely
Thinking about doing this to mine and if you use tipex/liquid paper it shows better so you can see who much to cut off
Update: the biggest they do now is 20mm rear axle spacers
Can someone pls tell me where to get those mudflaps ?? I want them on my st
They’re rallyflapz, if you search rallyflapz st150 on eBay they should come up 👍🏻
Filing backwards wont cut as well as forwards, just a tip to save you a bit of time and effort.
British chrisfix ? 😂
It’s a bold statement but I’ll take it 🤩